Related
As the title says, here's the Rom.zip extracted from RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe for those that don't use Windows, or prefer to have their RUU in zip format.
This will flash your phone to 2.31.651.7 STOCK.
http://www.mediafire.com/?m6x4sr682ruk027
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Enjoy!
Here's my guide to rooting .7:
http://forum.xda-developers.com/showthread.php?t=804296
Personally..I want to say THANK YOU, THANK YOU, THANK YOU.
I have spent the last four hours searching for this. This needs to be stickied. I'm bookmarking it for sure. This got my phone unbricked..I thought all hope was lost and I would have to call in for warranty support (I got mine refurbed through Sprint last October..so I don't even know if I would still have any warranty support), and see if I could try my luck and getting it replaced, since that is what others have said to do as apparently this file from OP, did not exist.
And so for future reference, so that others don't go mindlessly searching through the forums.
If you
a.) Managed to overwrite your Recovery some how or completely delete it. (I did..and from searching this and many other forums over the past couple hours..I can see I wasn't the only one), and also have no boot (or a corrupted boot loop)
b.) Still have S-ON (You can find this out by powering off your phone and then pressing and holding the power button and the lower volume button), I recommend you turn S-Off for future reference if you're going to be dealing with customer ROMs a lot (so you don't have to go through the hell I just did..). See here..
http://forum.xda-developers.com/showthread.php?t=759955
c.) Have an updated Hboot (1.47) (you can also find this info. in part b.)
....then you KNOW that you are stuck. Because you
a.) Cannot flash a ROM in Recovery because you cannot access it.
b.) You cannot access ADB because your phone won't go that far and will only go into fastboot..
c.) But even though you have access to fastboot you can't do ANYTHING like flash a recovery image or a ROM..or anything for that matter..because S is still ON. (this is the "not allow" messages you will see pop up.)
d.) You have bootloader 1.47 so if you for example, were like me couldn't use this file here.. (http://forum.xda-developers.com/showthread.php?t=657086), because it would say there was a newer version and wouldn't install it.
So this file right here..was the only thing getting my phone back to a usable state. And considering that my searches have shown to pretty much give up all hope and have it sent it for warranty repair, then I think this thread deserves a bump for all those that have screwed up.
Yeah..I have to start ALL OVER now from a stock ROM (thank god for nandroid), but at least my phone isn't a dead brick.
Just thought this needed a well deserved bump.
I wonder if there is a RUU for the latest .2?
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
Forgive me for seeming NOOBish... but I can use this to do the same, then restore Nandroid back and it will keep the PRL/Profile update?
Just wondering... lolz, thanks!
Yup But you will have to reroot. This takes root from you. You will have to reroot with the Hero rooter from Reg or Z4 or one click root. But read read read. And as far as the prl/profile yup it will stick. When your phone boots up after running this just go into settings and updates and choose update profile and update prl don't update firmware. I repeat don't update firmware. After that just reboot and check your prl should be 60675. After that reroot, then flash a recovery and then nand restore. Hope this helps good luck
Remember this returns you to stock you will loose root and recovery..
Yea it's me Again. With the
Modified .HERO.
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
jckeyser said:
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
Click to expand...
Click to collapse
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Thanks for the reply's all... I like Sense and have NFX rom on my Hero, loaded a few ROMS but they won't update, so no worries, when I have some free time I'll sit and do it then. I don't like the one click rooters nor the clockwork recovery, I guess I'm old school and do it the hard way, lol, but thanks for letting me know it'll work (prl update) and stay on the handset!
Regards!
Without opening a huge can of worms I would like to know whats the best newest rom out there with sense I just searched for like 3 hours and lot of threads are old and I want what ever is new with sense also would like to upgrade to 2.2 im on Honeybun v.-2 lite firmware 2.1 update1
Gelladuga69 said:
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
Click to expand...
Click to collapse
you got a link ? Im searching now
laie1472 said:
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
No need to reroot because it was a nandroid. Can't make a nandroid if you're not rooted.
Sent from my HTC Hero CDMA running Android 2.3
Does anybody have the original MD5 checksum for this file? I wanna make sure this file downloaded properly. Thanks in advance!
EDIT: efa439da700b5fad7ea49915ef7d2866
Sent from my HTC Hero CDMA running Android 2.3
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
mrtimo said:
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
Click to expand...
Click to collapse
What? Is your phone even rooted? Sprint upgraded to 2.1 a LONG time ago, the update is available at www.htc.com
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
systemshock869 said:
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
Click to expand...
Click to collapse
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
il Duce said:
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
Click to expand...
Click to collapse
According to the OP this one was extracted from the RUU, so it *should* work S-ON.
just to give you guys some more confidence i ran trusselo's super easy batch scritp on my dad's windows 7 box to hack 3e recovery.
you can look at my 3e thread in captivate general but do not attempt the kernel swap methods!
use trusselo's script on windows
if it fails or you are on a mac/linux machine then use the manual 3e fix after you root the device.
after i got 3e modded for self signed update.zip zip flashing like the old 2e recovery on 2.1 sgs phones i installed rom manager and chose the captivate cwm recovery. rebooted into recovery, reinstaled packages. phone rebooted, reistaled packages again and i was sucessfully in cwm. from there i was able to backup the stock rom and installed a .zip file that just changed my build.prop (taking baby steps) i could have spoofed the build.prop in many ways but it was for the sake of testing. the flash was successful. i booted up checked for the change and confirmed it was written to /system properly.
then i rebooted and restored the backup. there were some graphical errors including a broken progress bar and a splash screen that covers the menu when the restore is done so it is difficult to navigate, but it is something. success! the restored rom booted and the old build.prop was in place proving it was a successful restore.
tomorrow i will try a replaced vending.apk (market) and the build.prop as a market fix and post it in a thread if it works. if gtg465x doesnt mind i will try to build a rom off his deodexed rom if someone doesnt beat me to it.
i think we need a bounty to buy a dev phone for someone more knowledgable than me. i dont want to go all cowboy and brick this thing, the captivate had much more as far as backup plans so im being more cautious with this one. and even if i had a dev phone i wouldnt be of as much help as others around xda.
Chika Da China Da Chinese Chicken?
Dani897 said:
just to give you guys some more confidence i ran trusselo's super easy batch scritp on my dad's windows 7 box to hack 3e recovery.
you can look at my 3e thread in captivate general but do not attempt the kernel swap methods!
use trusselo's script on windows
if it fails or you are on a mac/linux machine then use the manual 3e fix after you root the device.
after i got 3e modded for self signed update.zip zip flashing like the old 2e recovery on 2.1 sgs phones i installed rom manager and chose the captivate cwm recovery. rebooted into recovery, reinstaled packages. phone rebooted, reistaled packages again and i was sucessfully in cwm. from there i was able to backup the stock rom and installed a .zip file that just changed my build.prop (taking baby steps) i could have spoofed the build.prop in many ways but it was for the sake of testing. the flash was successful. i booted up checked for the change and confirmed it was written to /system properly.
then i rebooted and restored the backup. there were some graphical errors including a broken progress bar and a splash screen that covers the menu when the restore is done so it is difficult to navigate, but it is something. success! the restored rom booted and the old build.prop was in place proving it was a successful restore.
tomorrow i will try a replaced vending.apk (market) and the build.prop as a market fix and post it in a thread if it works. if gtg465x doesnt mind i will try to build a rom off his deodexed rom if someone doesnt beat me to it.
i think we need a bounty to buy a dev phone for someone more knowledgable than me. i dont want to go all cowboy and brick this thing, the captivate had much more as far as backup plans so im being more cautious with this one. and even if i had a dev phone i wouldnt be of as much help as others around xda.
Click to expand...
Click to collapse
Very nice. I am gonna try as well. As long as CM is working I am comfortable pushing my luck a little.
Awesome! Can you post the files or the link to the thread with the files?
slider2828 said:
Awesome! Can you post the files or the link to the thread with the files?
Click to expand...
Click to collapse
just look in the captivate general stickies. i would post a link but there is stuff in there that doesnt apply because we dont have any kernels to flash, i dont want to confuse anybody and cause bricks because someone flashes a sgs kernel. i might make new write up.
Chika Da China Da Chinese Chicken?
I was going to run the PC batch script but the download link actually downloaded a CWM zip.
That's no PC script....no batch file to be found.
EDIT: I am an idiot. Disregard.
slappyjoker said:
I was going to run the PC batch script but the download link actually downloaded a CWM zip.
That's no PC script....no batch file to be found.
EDIT: I am an idiot. Disregard.
Click to expand...
Click to collapse
you think you're an idiot now wait till you read the directions!
Chika Da China Da Chinese Chicken?
Dani897 said:
you think you're an idiot now wait till you read the directions!
Click to expand...
Click to collapse
That was pretty classic. But hey, it sure did work.
1st. Test with CM. Adhoc WiFi Supplicant Zip. (Success)
2nd. Dunno yet.
yep working great
i am backing up in cwm as we speak
samsungcaptivates said:
i am backing up in cwm as we speak
Click to expand...
Click to collapse
So CWM doesn't work in the traditional sense yet?
bella92108 said:
So CWM doesn't work in the traditional sense yet?
Click to expand...
Click to collapse
it does but there seems to be a problem. not sure why, i had no issues flashing small mods for testing but people are having trouble flashing roms. besides that the restore process seems to give me some graphical bugs but works. as far as i can tell it works like it should but i wont discredit others claiming issues mounting the sd card.
Dani897 said:
it does but there seems to be a problem. not sure why, i had no issues flashing small mods for testing but people are having trouble flashing roms. besides that the restore process seems to give me some graphical bugs but works. as far as i can tell it works like it should but i wont discredit others claiming issues mounting the sd card.
Click to expand...
Click to collapse
Hmm, how long is the timeframe between when CWM is updated? I'd love to get rid of all this AT&T [email protected]# they litter my phone with, but I don't want to brick it... and lots of people seem to brick phones without CWM, haha
bella92108 said:
Hmm, how long is the timeframe between when CWM is updated? I'd love to get rid of all this AT&T [email protected]# they litter my phone with, but I don't want to brick it... and lots of people seem to brick phones without CWM, haha
Click to expand...
Click to collapse
you can use titanium backup to remove stuff. also there is odin/heimdall to flash "refuse" from h8rift. they work and are also the safety net unique to samsung phones.
Dani897 said:
you can use titanium backup to remove stuff. also there is odin/heimdall to flash "refuse" from h8rift. they work and are also the safety net unique to samsung phones.
Click to expand...
Click to collapse
Yeah I suppose, I am just hoping that CWM for Infuse will release quick along with new ROMs (Gingerbread? hehe)
bella92108 said:
Yeah I suppose, I am just hoping that CWM for Infuse will release quick along with new ROMs (Gingerbread? hehe)
Click to expand...
Click to collapse
"Release quick?" We've been waiting for weeks already
beatblaster said:
"Release quick?" We've been waiting for weeks already
Click to expand...
Click to collapse
Weeks? Didn't this phone hit stores 5/21? That was 8 days ago.
bella92108 said:
Weeks? Didn't this phone hit stores 5/21? That was 8 days ago.
Click to expand...
Click to collapse
Nah, 5/15. It's been 2 weeks today. Anyway.....
Hey anyone find a way to install cwm install packages using this update.zip?
It says it can't mount the sdcard when I try to install the .zip.
Anyone?
I just installed CWM via odin and all seemed well then I tried installing two different ICS based roms and both resulted in being stuck in a reboot loop. Could I have done something wrong? I have tried some fixes I saw posted around but nothing fixed the issue.
make sure u use darksidr before every flash. Also make sure u wipe dalvik cache. Did u install the uclca4 radio before u tried those roms?
icenight89 said:
make sure u use darksidr before every flash. Also make sure u wipe dalvik cache. Did u install the uclca4 radio before u tried those roms?
Click to expand...
Click to collapse
1. What's darksidr? I backed it up so I can go back... I just want ICS
2. I did dalvik twice
3. No, one ICS rom said you needed to install radio but the other didn't and on the first step of installing the rom it looked like the radio may have been packaged with the rom. Where can I find the radio download?
Got the radio and no luck =/
flash superlite 5.1, it does all the work for u
I flashed superlite 5.0, where is 5.1?
but 5.0 did it all for me too and didn't work =/
loom for darkside wipe and flash it. Superlite 5.1 just got posted, try it. If that doesn't work, odin back stock, reflash cwm, and flash superlite again.
Go to the top of rom page and read read read then Google Google Google. You guys are making the skyrocket forum look like crap. 1 INSTALL ODIN ICS FOR A START. INSTALL CWM. FIND A ROM. FOLLOW THEIR INSTRUCTIONS! You should have it. SHOULD
SkyRocket [ICS Rom]
WhatzinyourphonE said:
Who the hell let this noob post. We really should limit people to ten 5 threads a day. And 50 posts a month.
SkyRocket [ICS Rom]
Click to expand...
Click to collapse
WhatzinyourphonE said:
Go to the top of rom page and read read read then Google Google Google. You guys are making the skyrocket forum look like crap. 1 INSTALL ODIN ICS FOR A START. INSTALL CWM. FIND A ROM. FOLLOW THEIR INSTRUCTIONS! You should have it. SHOULD
SkyRocket [ICS Rom]
Click to expand...
Click to collapse
Jeez, go easy son. A careful reminder about the search feature is usually enough.
WhatzinyourphonE said:
Go to the top of rom page and read read read then Google Google Google. You guys are making the skyrocket forum look like crap. 1 INSTALL ODIN ICS FOR A START. INSTALL CWM. FIND A ROM. FOLLOW THEIR INSTRUCTIONS! You should have it. SHOULD
SkyRocket [ICS Rom]
Click to expand...
Click to collapse
I did everything you mentioned. I installed odin, installed CWM, found a rom, did everything the developer instructed me to do, the developer was aware of the problem and none of his fixes worked for me so I was advised to ask elsewhere. Yeah, I don't flash roms every week like I used to with my HD2 and this is my first time really messing with radios so I asked for help. That's what the forums are for. I'm sure I've invested more money in this community than you have and I think I completely deserve to make a few retarded posts once every 10 months. Thanks for all your help with your troll posts
iLiberate said:
I did everything you mentioned. I installed odin, installed CWM, found a rom, did everything the developer instructed me to do, the developer was aware of the problem and none of his fixes worked for me so I was advised to ask elsewhere. Yeah, I don't flash roms every week like I used to with my HD2 and this is my first time really messing with radios so I asked for help. That's what the forums are for. I'm sure I've invested more money in this community than you have and I think I completely deserve to make a few retarded posts once every 10 months. Thanks for all your help with your troll posts
Click to expand...
Click to collapse
After Odin, did u boot into the phone and let it cycle and then install Odin cwm? Give that a try. Also, most of the updated ROMs already have the proper radio, no need to flash. Let us know how it goes.
Run the: ics odin one click. Then odin cwm recovery. Then flash ics rom. Or just flash this rom and you'll be good to go
http://forum.xda-developers.com/showthread.php?t=1585290
In cwm its also very important to format /system before you flash the new rom. You didn't really mention if you did that or not, so I'm just saying, just in case
Sent from my SAMSUNG-SGH-I727 using xda premium
The rom in that link i posted formats the system and cache for you. So you do not neex to wipe anything
iLiberate said:
I did everything you mentioned. I installed odin, installed CWM, found a rom, did everything the developer instructed me to do, the developer was aware of the problem and none of his fixes worked for me so I was advised to ask elsewhere. Yeah, I don't flash roms every week like I used to with my HD2 and this is my first time really messing with radios so I asked for help. That's what the forums are for. I'm sure I've invested more money in this community than you have and I think I completely deserve to make a few retarded posts once every 10 months. Thanks for all your help with your troll posts
Click to expand...
Click to collapse
If you cant figure out how to make it happen go with Silvers rom, he's got the hookup with an easy as pie flash. Plus he makes some damn good stuff
http://forum.xda-developers.com/showthread.php?t=1585290
silver03wrx said:
The rom in that link i posted formats the system and cache for you. So you do not neex to wipe anything
Click to expand...
Click to collapse
I know lol. That comment was directed to iLiberate.
My apologies, forgot to quote
Sent from my SAMSUNG-SGH-I727 using xda premium
xcrazydx said:
If you cant figure out how to make it happen go with Silvers rom, he's got the hookup with an easy as pie flash. Plus he makes some damn good stuff
http://forum.xda-developers.com/showthread.php?t=1585290
Click to expand...
Click to collapse
Downloading now
Everyone else, I have done everything mentioned, trying this rom and if it doesn't work I'll just load my backup for now. Thanks for all your help
silver03wrx said:
The rom in that link i posted formats the system and cache for you. So you do not neex to wipe anything
Click to expand...
Click to collapse
No luck with yours either =/
iLiberate said:
No luck with yours either =/
Click to expand...
Click to collapse
I don't know what you've done to your phone. Perhaps if you make a very detailed list of what your setup is and what you've done so far we can help get you going. Be specific
Afternoon iLiberate,
What carrier are you with?
~PsyCl0ne
EDIT: Actually you know what come over to [RoM] ~[4.0.3.]~TEAM PERFECTION~REVAMPING
Now a couple of things before you start.
I am using http://forum.xda-developers.com/showthread.php?t=1472954 for my recovery. I have had issues with a newer version but this one has helped me through a ton of issues I have had.
(Flash this with ODIN first)
I also recommend getting a wiping script DARKSIDE Super wipe. http://forum.xda-developers.com/showthread.php?t=1487706
(Give props to the guy that put this script together. Keep the zip file some where easy to access, you will be moving it to your phones external SD card along with the rom zip and kernel files.)
When you go into the TeamPerfection thread it is gonna be kind of confusing looking at all the links. Basically you will see 3 Themes (AOSP ICE, KOBALT, Phone Candy) then a link to a rom that is already themed, and finally the stock rom which you will need if you want to flash any of the three themes I listed earlier. For now I would just go for the Sense release we can always change what it looks like later.
Also you will need a kernel.
If you're with AT&T I would suggest getting Mohan's kernel. If you're with a Canadian carrier I would suggest Romracer's kernel.
From here you can basically follow the guide in post number 3. It is really simple just need a little patience and it will go through. Also if you have any titanium backups from Gingerbread, please don't restore those apps when your phone comes back up. Just scribble down a list of apps you currently are running, make backups of SMS/MMS if you wish and then manually download them one by one from the market. Then you can make a Tibu of the apps so if you want to change what your phone looks like you can just restore all the apps in one go.
If you need any more help please feel free to PM me, I honestly don't mind or even post back here. Gonna be doing some work around the house but I'll check back periodically.
~PsyCl0ne
Had a problem this morning while trying to update the phone. Just will go through the procedure I went through.
Went to settings and then to about and then just went to update. Downloaded no problem then was prompted to update so selected yes. Phone rebooted and went into recovery. Now first question is does it matter if I have phone unlocked and rooted and have clockwork mod instead of stock recovery. Because I kept getting errors while trying to install the zip this morning.
Do I have to install stock recovery and then install the zip.
Also will this break the root or will it be fine.
I have searched for this problem and could not find it. But I could of missed it. If someone could point me in the right direction would be greatfull
snwman said:
Had a problem this morning while trying to update the phone. Just will go through the procedure I went through.
Went to settings and then to about and then just went to update. Downloaded no problem then was prompted to update so selected yes. Phone rebooted and went into recovery. Now first question is does it matter if I have phone unlocked and rooted and have clockwork mod instead of stock recovery. Because I kept getting errors while trying to install the zip this morning.
Do I have to install stock recovery and then install the zip.
Also will this break the root or will it be fine.
I have searched for this problem and could not find it. But I could of missed it. If someone could point me in the right direction would be greatfull
Click to expand...
Click to collapse
Dude,
NO, you cannot update or install an RUU if you have in any way changed your system partition (e.g. root) and especially if you have installed a custom recovery.
I'm very surprised that your phone has found the update at all! It normally doesn't do it if it's moded in any way.
To get back to stock you'll have to flash a recovery image of your ROM in stock state using the custom recovery, then use fastboot to flash a stock recovery and finally you have to relock the bootloader!
In any case, have a look at these posts:
Getting back to stock
Getting over ERROR 155
ovimunt said:
Dude, NO, you cannot update or install an RUU if you have in any way changed your system parition (e.g. root) and especially if you have installed a custom recovery.
I'm very surprised that you phone has found the update at all! It normally doesn't do it if it's moded in any way/
In any case, have a look at these posts:
Getting back to stock
Getting over ERROR 155
Click to expand...
Click to collapse
Yeah found my answer in the general section thought it would be in here under Q&A but will try and work it out. Its the new baseband i want to see if it will improve the signal on the phone as its crap
snwman said:
Yeah found my answer in the general section thought it would be in here under Q&A but will try and work it out. Its the new baseband i want to see if it will improve the signal on the phone as its crap
Click to expand...
Click to collapse
Yeah, I can confirm that I have seen a significant improvement in signal levels and quality of reception since I've updated to the new baseband!
Some people say they haven't seen a difference but it has definitely made a difference for me.
ovimunt said:
Yeah, I can confirm that I have seen a significant improvement in signal levels and quality of reception since I've updated to the new baseband!
Some people say they haven't seen a difference but it has definitely made a difference for me.
Click to expand...
Click to collapse
Better get back to stock then cheers for the help again
I'm just starting to learn how to do all this...
I have CWM 5.8.4.0 installed, UCLD2 and Superuser 3.0.7
I've lost root access and can't figure out how to get it back. I've been searching the forum but can't quite seem to find what I need. I went through the process for rooting and no good result. I thought maybe I should just do a recovery back to 2.3.6 in CWM and it says the MD5 mismatch. I thought I had a solid backup for my original phone all this time. I restored it once through ROM manager and it worked great. I did a factory reset and went through the rooting process again and still nothing.
What my goal is, is to flash to a ROM that people are liking and that performs well. Was going to try SKYICS 4.2E, but I don't think I should attempt anything until I figure out how to go to a backup consistently. I could back up what I have now, which gives me a working phone, but I don't really like it. Most of my apps don't work correctly on it. What I really don't want to do is go forward again and really have it jacked up and not be able to go to a previous backup.
Where should I start? I'm guessing getting root access again. I'm assuming I won't be able to flash another ROM until I get this.
Thanks for the help!
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
jordan9812 said:
Just go read the faxes then after hours of that restore to stock and read the rooting guide good luck
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Okay funny guy... What was my first line again??? lol
I don't even know how to get back to stock. I can do that even if I don't have root access? I'm just trying to learn the mechanics of all this. Learn what does what... CWM is a means to write to the phone from boot. Can install different ROMs and parts of ROMS, ie. lock screens... Then there's kernels that operate the hardware that have to be compatible with the ROM. People talk about way more than I can comprehend at this point; it's one step at a time for learning.
So---first step is what? Read for hours? I don't understand what I'm reading. haha
32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
What was the very first line in my post? lol
I'm not a programmer, but have taken some Java classes.
I don't know how to use scripts at all. In my mind, I can't do anything until I get root access. I'm not sure what the MD5 mismatch means either. I'm definitely reading things, but it seems that either I'm not understanding or that it's a tangent and not really related to what I'm trying to do...
You don't need root access. All you need is cwm to flash roms, kernels and radios
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!
CodeRedDewd said:
I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!
Click to expand...
Click to collapse
read the n00b posts and stickies, its really not that hard, all roms r rooted..meaning u dont have to root, u can do root ur self for stock firmware, the hard part(not really hard) is flashing cwm(clockworkmod recovery) via odin, once u do that flash a rom according to the rom u want to use, read this on howto root and flash cwm using odin http://forum.xda-developers.com/showthread.php?t=1340526
to go back to stock is very easy also via odin, read this link on howto http://forum.xda-developers.com/showthread.php?t=1652398
once u find a rom read all about that rom on how to flash it and any trouble shooting
clockworkmod recovery replaces the stock recovery so u can do wonderful things to our phones, it's this application that installs(flashes) the roms
Thanks for the info... I installed another ROM that I liked better, SKYICS without the root. I wanted to tweek something else and I cannot do it unless I get root access. Using Odin is pretty easy like you said and CW recovery. The first link you posted is the one I originally followed and it was rooted. I went through the process again and no root. Titanium just says sorry I don't have permission. I did a factory reset and tried to root again and nothing. I'm not sure where to go from here to get the root back....
If you flash a custom ROM they are already rooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol
CodeRedDewd said:
I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol
Click to expand...
Click to collapse
thats why i said when u use a rom "once u find a rom read all about that rom on how to flash it and any trouble shooting", its usually a bad flash, if reflashing doesnt work then redownload the rom and again and flash
u could of flashed superuser, but the problem was the rom didnt install properly......good u got it solved
32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
Can you be more specific on rooting 4.0.4? I didn't like SKY ICS and installed Embryo. It's much faster than the other, but now I don't have root again. I don't know how I got root access to SKY ICS, because when I asked I didn't have root, but 2 days later I suddenly had the access and did nothing.
I'm browsing around trying to find how people root 4.0.4...
CodeRedDewd said:
I'm browsing around trying to find how people root 4.0.4...
Click to expand...
Click to collapse
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak
pc103 said:
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak
Click to expand...
Click to collapse
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.
CodeRedDewd said:
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.
Click to expand...
Click to collapse
This superuser zip gave root access where other versions did not for 4.0.4.
CodeRedDewd said:
That's exactly what I did and it's not working. ...
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted?....
I've even started all over and ...I'm at a loss here..
Click to expand...
Click to collapse
(See below)
CodeRedDewd said:
This superuser zip gave root access where other versions did not for 4.0.4.
Click to expand...
Click to collapse
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?
pc103 said:
(See below)
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?
Click to expand...
Click to collapse
It wasn't the steps ther were wrong. It was superuser that was wrong. I tried and tried with 2 different ones and nothing. Then I found another version that worked on the first attempt. The versions I tried first worked on 2.3.5, but not on 4.0.4.
I'm attaching the one I found that worked the first time. I tried the others about 20 times each and nothing, but they worked before. I haven't read anywhere that there are different versions of superuser that only root certain builds. I found it out the hard way.
If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA
jyazzie110 said:
If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Thanks. I have read that, and that it works sometimes when it says it fails. The problem was that there are a few versions of superuser. I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.
Let's be clear.
I am glad you reached this goal CodeRed. Enjoy!
CodeRedDewd said:
...It wasn't the steps that were wrong....The problem was that there are a few versions of superuser.
Click to expand...
Click to collapse
Yes, but there was only one version in the [GUIDE]{ROOT}How To Root The ICS Leak.
CodeRedDewd said:
I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.
Click to expand...
Click to collapse
I had the older zip too, but it was all properly instructed in our [Dev] thread. Copperhed posted 'This will root 2.3.5 or 2.3.6' for an earlier Superuser.zip last November, linked in InSaiyanone's excellent all-in-one guide.
Needing to root 4.0.4 would lead us to the next stickie, where projeqht linked
Starskyrob's 'Step 2: Flash Attached zip from recovery.' in his [GUIDE]{ROOT}How To Root The ICS Leak, posted March 28th, referring to the zip you and I succeeded with. I think anyone reading the stickies should find the same guidance.