I have recently been looking around for a decent community forum to take part in that focuses on the Viewsonic's Viewpad 7 and Viewpad 10, I am mainly interested in the 10 as this is the one I own, however they should probably be in the same section.
The viewpad 7 is a 7 inch froyo tablet and the viewpad 10 is an intel atom based device that dual boots win7(i realise you dont generally deal with devices with this os) and android 1.6.
These devices have only been around a short time and already have some development activity, Al sutton has put together a version of froyo for the viewpad 10
So could we get a new forum for these devices please?
viewpad 10
Does anyone have one of these?? My wife has one and would like to know what development if any has started on this.. like getting 2.2 as the android operating system instead of 1.6.
did you read my post?
I directly linked to the current 2.2 android froyo build for the viewpad check the link in the original post.
viewpad 10
Hi guys good day anyway i just bought a viewpad 10 and do anyone know how to remove the android os from the viewpad cause i only need the window os ??
Since you guys have bought one, I have a doubt.
Does the GPS works in Windows or atleast in Android ?
Does the Viewpad 10 has 3G ?
i have a viewpad 7
Hey guys, it would be great to have a dedicated forum for viewpad 7/10.
I have the 7" froyo since 2 weeks by now, its great!
I would love to see an android x86 forum (typing on viewpad 10 right now).. I love the pad in Windows mode but limitations android 1.6 on atom processors is awful. There is a clear need for xda-devs to embrace tablets as the two techs converge.
To answer the question of how to remove Android, I would boot into a linux live environment and delete the android partition, then increase the size of the windows partition. Obvious need to back up data beforehand!
Hi, how are you supposed to installed Windows 7 Service Pack onto the ViewPad 10.
It only has a 16GB hard drive, and the Windows 7 requirement is 16GB of free space.
After downloading the service pack I have 30MB left!, The pad cannot install the service pack.
Is this an oversight on Viewsonic's part?
podwin said:
Hi, how are you supposed to installed Windows 7 Service Pack onto the ViewPad 10.
It only has a 16GB hard drive, and the Windows 7 requirement is 16GB of free space.
After downloading the service pack I have 30MB left!, The pad cannot install the service pack.
Is this an oversight on Viewsonic's part?
Click to expand...
Click to collapse
try tiny7 http://www.davidtan.org/tiny7-tiny-windows-7-unattended-activated-iso-cd/ it is only 2.4GB installed, SP1 will likely make it a little bigger but nowhere near 16GB
ViewPad 10 3G problem
Hello,
I have problem with my 3G Join Air, form some days that support not work. I reinstal Windows from Recovery Media but again nothing in Control Panel in Modems write ZTE Usb modem is Not presen. What i must do?
Froyo build available
Froyo build available:
http://www.viewsonic.com/products/vpad10.htm
Not installed yet just wanted to let you know.
Just buy a viewpad 10 but??
Hi, I am Richard and have a Viewpad 10 but Market is not working.
Windows is working fine but there is not much memory left.
According the factory the memory can be enlarged to 2Gb but where to go to?
So my first question is how to meka Market working.
Second question hase any one upgraded the working memory?
Found forum on Tega site
On this url you can find some talks about viewpad 10 same as Tagav2.
http://www.tegav2.com/forum/viewtopic.php?f=21&t=120&p=806&hilit=ddr3#p806
Hi there
It seems to me that a dedicated forum on the viewpad is a good thing.
I just got an Azpen X1, which seems to be the same as the Viewpad 10. It has an Atom N455 CPU, and Win7 and Android 2.2 installed. The 16GB hard drive ran out of space when I did the first update!!
I too am looking for some place to discuss this tablet. I opened it up and took some pics of it. They can be seen here:
http://s563.photobucket.com/albums/ss71/aquacephalous/Azpen X1/
Yes they look really similar from the inside point of view. Changes should be upgrade of memory and upgrade in space disk. Could it be possible to insert a standard SSD inside ? Cheaper and bigger...
oliewan said:
Could it be possible to insert a standard SSD inside ? Cheaper and bigger...
Click to expand...
Click to collapse
Not sure that it would be much cheaper, even if it would fit.
I found an exact replacement, but 32GB and 64GB sizes.
http://buy4ssd.com/shop/24-kingspec-sata-ii-motive-ssd-mlc-nand-flash-32gb.html
http://buy4ssd.com/shop/80-kingspec-sata-ii-motive-ssd-mlc-nand-flash-32gb.html
The 64GB one costs $162, where a standard one sells for $140 at NewEgg:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820139286
The sizes of the two, to compare:
Kinspec SSD Module:
W:1.5" x L:2.1" (39mm x 54mm)
Kingston 1.8" SSD:
W:2.1" x L:3.1" (53.1mm x 78.7mm)
I ordered the 32GB version from buy4ssd. It seems to be coming from Hongkong, so I hope that I actually get it!!
Honeycomb 3.2-x86
For those that prefer to use Android, there seems to be a 3.2 version for x86:
http://code.google.com/p/android-x86/downloads/list
It is listed as being for the Tega v2, but that appears to be very similar to the Viewpad 10 and Azpen X1:
http://www.tegav2.com/
My tablet has a 1GB partition with Android 2.2 on it. I'm not sure if it it is big enough for the 3.2 version.
Edit: I burned a CD and booted it in Live mode. It seemed to run pretty good on my Azpen X1. I used a USB CD drive to boot it.
hi i'm new here. question? step by step how to remove android from my viewsonic.thanking u in advance
shantall1664 said:
hi i'm new here. question? step by step how to remove android from my viewsonic.thanking u in advance
Click to expand...
Click to collapse
Do you want to use the Android partition for Windows? You would need to do that inside of Windows.
I don't use Windows, so I can't help much. Look in the Administrative Tools section for Disk Manager. Windows doesn't support the filesystem that Android uses, so it will be listed as "unknown", or something like that.
Edit: In the Windows menu, type "Computer Management" in the search bar. When that comes up, select "Disk Management" on the left. Choose the partition you want to delete, right-click and select "Delete Volume...". Then right-click the Windows partition and select "Extend Volume...".
Make sure you don't delete the wrong partition!!
Hi I just intalled cyanogemod 7.1 on my touchpad. However the "Device Info" field shows I have only 850mb. This is a 64gig Touchpad. What happened to the rest of the space? Thanks.
Post this in the HP Touchpad area of this forum and you might get a quicker answer. I just ordered a 32 GB version of the Touchpad and this is a question I would like answwered myself.
I recently bought a 7" tablet from a great chinese site with bulk...here is the device:
http://www.youtube.com/watch?v=FCvef9IYX0o
(actually it's the closest thing to it but I have the actual link here)
http://www.aliexpress.com/store/600394/210366870-551855034/7-Android-4-0-5-point-Capacitive-Tablet-PC-1GHz-512MB-4GB-800x480-WIFI-G-Sensor.html
- only difference is mine is 2 gig and comes with ICS 4.03
Getting to the point...It comes pre-rooted and with some nice features for a 7 inch...but I messed around and installed busybox to "xbin" rather than "bin" as instructed...as those of you have have done this know: factory reset.
Now everything comes back up fine but one annoying little problem occurs...it won't let me install anything due to internal memory storage being full!
This is driving me up the wall as no site seems to cover this properly! Any know how techs wanna help this noob figure this out???
Also, is there a GOOD allwinner a10 link you guys have for people like me who love to tinker with not so well known android tablets from China? LOL! Love this place btw...been loyal for years to your forums, even if my name doesn't show it!
Bump!
Bump!
Bigbass12 said:
Also, is there a GOOD allwinner a10 link you guys have for people like me who love to tinker with not so well known android tablets from China? LOL! Love this place btw...been loyal for years to your forums, even if my name doesn't show it!
Click to expand...
Click to collapse
slatedroid is the best bet for you:good:
I just bought this tablet a few days ago. It seems to be pretty new and based on an earlier model (Tab-9701). The '97' refers to the screen size, 9.7 inches and the '02' in the model number refers to having two cameras now instead of only one. It's a bit cheap and nasty but can get me online and take photos when I'm out and about.
Anyway, it has Ice Cream Sandwich installed (Android 4.0.4) and I'd like to upgrade it to Jellybean at least but since it's so new, I don't want to brick it. I can only find two unanswered posts on the XDA forums in relation to the 9701 model and nothing about the 9702, so this is the first. Does anyone have any idea what tablet this thing would be based on, maybe like a Nexus or something? Then I could follow the guide for the similar model and maybe install Jellybean myself, since I have root.
Any help would be appreciated. Here are the specs:
10" Capacitive-Touch IPS LED Display
ARM Cortex A10 1.2Ghz CPU
Memory 1GB DDR3 ## Storage 8GB
Built-in Wifi 802.11 b/g
HDMI port, Integrated Micro-SD Card Reader, micro-USB 2.0
Dual Camera (Front & Rear)
Google Android 4.0 Ice Cream Sandwich OS
Cheers.
Michael.
MarsMichael said:
I just bought this tablet a few days ago. It seems to be pretty new and based on an earlier model (Tab-9701). The '97' refers to the screen size, 9.7 inches and the '02' in the model number refers to having two cameras now instead of only one. It's a bit cheap and nasty but can get me online and take photos when I'm out and about.
Anyway, it has Ice Cream Sandwich installed (Android 4.0.4) and I'd like to upgrade it to Jellybean at least but since it's so new, I don't want to brick it. I can only find two unanswered posts on the XDA forums in relation to the 9701 model and nothing about the 9702, so this is the first. Does anyone have any idea what tablet this thing would be based on, maybe like a Nexus or something? Then I could follow the guide for the similar model and maybe install Jellybean myself, since I have root.
Any help would be appreciated. Here are the specs:
10" Capacitive-Touch IPS LED Display
ARM Cortex A10 1.2Ghz CPU
Memory 1GB DDR3 ## Storage 8GB
Built-in Wifi 802.11 b/g
HDMI port, Integrated Micro-SD Card Reader, micro-USB 2.0
Dual Camera (Front & Rear)
Google Android 4.0 Ice Cream Sandwich OS
Cheers.
Michael.
Click to expand...
Click to collapse
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
http://stlgroup.home.xs4all.nl/Tablets/
Michael.
MarsMichael said:
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
http://stlgroup.home.xs4all.nl/Tablets/
Michael.
Click to expand...
Click to collapse
Oops! Now I've semi bricked this too! I managed to get a vrsion of Clockwork Mod onto it, but the graphics are not very graphic like and I'm stuck on the CMW recovery screen!
Michael.
MarsMichael said:
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
Michael.
Click to expand...
Click to collapse
Michael, i know this post is old but i also have the lenco tab 9702. Can you please tell me how you rooted it?
And if you found any please tell me what rom you used.
hi guys
i have recently recieved a old Tablet PC as new toy
Model number UM-A102, Build company unknown...
and these are the spec that was written on the little menu that came in the box
CPU processor speed 1.2GHZ
Memory 4GB-32GB
RAM 512MB-1GB
Tf card 128M-16G
it currently running Android 4.1.2
my question is
dose anyone know where i could find a newer firmware that might work with this unit?
have spent hours online digging but no luck so far
if anyone could point me at an right direction would be very very nice :fingers-crossed:
thanks in advence~
Icarus1314 said:
hi guys
i have recently recieved a old Tablet PC as new toy
Model number UM-A102, Build company unknown...
and these are the spec that was written on the little menu that came in the box
CPU processor speed 1.2GHZ
Memory 4GB-32GB
RAM 512MB-1GB
Tf card 128M-16G
it currently running Android 4.1.2
my question is
dose anyone know where i could find a newer firmware that might work with this unit?
have spent hours online digging but no luck so far
if anyone could point me at an right direction would be very very nice :fingers-crossed:
thanks in advence~
Click to expand...
Click to collapse
Here, found your device :-
http://www.youmi88.com/en/pic_view.asp?id=312
But sadly, you can't do much with it.Since it's a chinese device... There's no support available for it.