Database Info

[Q] CM7.1 and kernal problem???

I use CM7.1 on my desire s,so sholud I update kerner to " Tiamat 1.1.4" or not???

laielephant said:
I use CM7.1 on my desire s,so sholud I update kerner to " Tiamat 1.1.4" or not???
Click to expand...
Click to collapse
Flash it, try it and if you are not happy with it reflash the CM kernel
P.S.: there is Tiamat 1.1.5 available

amidabuddha said:
Flash it, try it and if you are not happy with it reflash the CM kernel
P.S.: there is Tiamat 1.1.5 available
Click to expand...
Click to collapse
what is the benfit to flash this kernal?????
for cpu overlock or battery life??

laielephant said:
what is the benfit to flash this kernal?????
for cpu overlock or battery life??
Click to expand...
Click to collapse
It depends what you want from your phone.
I use the Tiamat SmartAssV2 governor underclocked to 768 MHz max/ 182 MHz min CPU that gives me about 5 days of battery life (but I use my phone mainly for calling and WiFi). Tried with the CM kernel (interactive governor) and Tiamat gives better results for me.
IMO you have to try both kernels with you usage and decide which suits you best.

if I flash Tiamat 1.1.5.....and I do not satisfy with this ,so how can I back to origin kernal????
This is my thinking!!!
Into "Clockrecovery" --"wide cache" and "Wipe dalvik-cache"--then reflash CM7
Is it right???

laielephant said:
if I flash Tiamat 1.1.5.....and I do not satisfy with this ,so how can I back to origin kernal????
This is my thinking!!!
Into "Clockrecovery" --"wide cache" and "Wipe dalvik-cache"--then reflash CM7
Is it right???
Click to expand...
Click to collapse
Absolutely. Reflashing the ROM will bring you back the stock CM kernel

amidabuddha said:
Absolutely. Reflashing the ROM will bring you back the stock CM kernel
Click to expand...
Click to collapse
OK........tonight,I will try to flash this kernel......Wait my good news!!

laielephant said:
OK........tonight,I will try to flash this kernel......Wait my good news!!
Click to expand...
Click to collapse
Do not forget to calibrate your battery for best results:
charge your phone to 100 %
power it off (shut down)
continue charging until the led indicator turns from orange to green (this will take several seconds
reboot to Recovery (I use 4EXT Recovery)
wipe battery stats
reboot to your ROM

... Or use Battery Calibration.

amidabuddha said:
Do not forget to calibrate your battery for best results:
charge your phone to 100 %
power it off (shut down)
continue charging until the led indicator turns from orange to green (this will take several seconds
reboot to Recovery (I use 4EXT Recovery)
wipe battery stats
reboot to your ROM
Click to expand...
Click to collapse
Why config it ????
I never do it before ??

laielephant said:
Why config it ????
I never do it before ??
Click to expand...
Click to collapse
This is a procedure that is advised to be done after every fresh flash (ROM, Kernel, etc) that is changing some of the operational conditions of the device (such as CPU), because the system is maintaining a log of the battery consumption (the graph in the Battery use in menu is based on that). So when you change the system this log is not longer valid so it has to be cleaned to ensure proper battery indication. (your phone can show 30 % but can actually have 50 % or 15 % charge if not calibrated)
---------- Post added at 12:00 PM ---------- Previous post was at 11:59 AM ----------
SqueeZenx said:
... Or use Battery Calibration.
Click to expand...
Click to collapse
any Battery Calibrating app is skipping step 3 in the described procedure, which is the reason that I prefer the manual method

I flash this kernal last night....and wipe battery too
Now my setup is
"SMARTASSV2 mode" 1267~268
and what is the different bewteen this mode???

[Q] my phone keeps turning off

ever since i installed the 1.8 infusion kernel my phone has been turning off by its self. can anyone help?

lanced477 said:
ever since i installed the 1.8 infusion kernel my phone has been turning off by its self. can anyone help?
Click to expand...
Click to collapse
Install a different kernel.

[Q] G3 get freeze and buttons don't get it from lock mode.

Hello. I have got very annoying problem. I'm using Kyrillos 9.4.
Sometimes (twice a week) my g3 get freeze, and I can't unlock it, because screen don't light on. I must get battery off and on and after battery remove phone works as new.
I have this freeze on every kernel (G3MOD oc, non-oc, kyroarokernel)
Is there any fix for this issue?
This is annoying in the long run.
Do you have this problem too? Or my g3 has got defect?
PS. When I'm using stock, Samsung rom this issue does not exist.

Do u undervolt?
Cheers
Sent from my i9003 powered by Poseidon's Rom/Dxkp9 Junior + UC kernel

No. (10 characters)

mosak said:
No. (10 characters)
Click to expand...
Click to collapse
Then I'm not very sure. The only causes I know of freezes is undervolting and overclocking. Since u do neither, I don't know. I would wipe cache and dalvik cache, if doesn't work factory reset, if doesn't work reflash. Are u sure u tested on non-oc kernel?
Cheers
Sent from my i9003 powered by Poseidon's Rom/Dxkp9 Junior + UC kernel

Yes, I'm sure. Now i have got Non-OC kernel (G3MOD 2.3 non-oc). In set CPU I can set max frequency 667Mhz.
But on non-oc i have got this issue less frequently than on oc.
Maybe 1-2 times at month.
Have you ever got same frezze like mine?
Thank for help

Maybe once or twice on oc. I'm nt sure wad is causing your problem, but if its very little freezes then maybe you can live with it?
Cheers
Sent from my i9003 powered by Poseidon's Rom/Dxkp9 Junior + UC kernel

mosak said:
Hello. I have got very annoying problem. I'm using Kyrillos 9.4.
Sometimes (twice a week) my g3 get freeze, and I can't unlock it, because screen don't light on. I must get battery off and on and after battery remove phone works as new.
I have this freeze on every kernel (G3MOD oc, non-oc, kyroarokernel)
Is there any fix for this issue?
This is annoying in the long run.
Do you have this problem too? Or my g3 has got defect?
PS. When I'm using stock, Samsung rom this issue does not exist.
Click to expand...
Click to collapse
try flash the kernel with odin, using tar file. And next wipe data

Ok. I flashed kernel via Odin and now it's ok.
I post new reply after 100h uptime (or first freeze )

Problem with cpu frequencies.

I have a sm g930v and I can't figure out why my frequencies won't stick. I set min to 307 and max to 1.5 and it sets the min to 900 and max to 1.5 and barely hits 1.2 max. This started happening a few months ago and I'm stumped on what the problem is. any suggestions or help would be very appreciated!

Rooted with custom kernel?

*Detection* said:
Rooted with custom kernel?
Click to expand...
Click to collapse
I believe so. I followed the rooting guide from max lee (highonandroid) on youtube. I dont know if its a custom kernel, but to root it i had to flash a .tar to my phone, which contained a boot.img.

I've noticed this problem with Kernel Adiutor and its modified derivatives, haven't got a clue why this occurs except perhaps for DVFS issues. Flash a kernel compatible with Synapse and see how you go.

[Kernel] [SM-T560/gtelwifi][4.4]

This is a Custom Kernel for SM-T560/gtelwifi running stock ROM.
-Added CPU Governor Ondemand
-Added CPU Governor Powersave
-Default cpu Governor is set to Ondemand
-Fixed cpu Frequency from resetting it self if lowered manually by user.
-Added Virtualization Drivers.
Flash with twrp.
Download here
drive.google.com/open?id=1G6-t7ykD6PDNoGegNAXPyAggnd_UArVO

Hi
First of all,thank you for your hard work...
Now i tried your kernel on my samsung sm-t560 only wifi,i tried it with stock ROM and "Lightning ROM" but it's stuck on bootloop(kernel splash screen).Am i doing something wrong,or this kernel isn't for my tablet?Thanks
Edit;
So i managed to flash the kernel and it works,it finally works,i was looking for this thing for so long.Thank you very much

pren22 said:
Hi
First of all,thank you for your hard work...
Now i tried your kernel on my samsung sm-t560 only wifi,i tried it with stock ROM and "Lightning ROM" but it's stuck on bootloop(kernel splash screen).Am i doing something wrong,or this kernel isn't for my tablet?Thanks
Edit;
So i managed to flash the kernel and it works,it finally works,i was looking for this thing for so long.Thank you very much
Click to expand...
Click to collapse
Same thing happened to me. How did you manage to fix it?

Here is the upload of the kernel.

GreeyChip said:
This is a Custom Kernel for SM-T560/gtelwifi running stock ROM.
-Added CPU Governor Ondemand
-Added CPU Governor Powersave
-Default cpu Governor is set to Ondemand
-Fixed cpu Frequency from resetting it self if lowered manually by user.
-Added Virtualization Drivers.
Flash with twrp.
Download here
drive.google.com/open?id=1G6-t7ykD6PDNoGegNAXPyAggnd_UArVO
Click to expand...
Click to collapse
Could i ask you to do the same thing for the latest version of t560 4.4.4. i'll upload the stock kernel and if you can do it i would really appreciate it.
I think the kernels are the same but when i try to install the modified from above, it gets stuck the first boot splash.
Thank you