I can't read french, but the translation site seems to indicate that this hexedit will permanently unlock any phone. My Captivate nv_data.bin matches perfectly.
I just can't translate all the comments and i really want to read what everyone is saying.
Any french speakers out there?
http://forum.frandroid.com/forum/viewtopic.php?id=26052
Thanks to zzyxy for posting this in another thread.
EDIT - changed title and found English Post on XDA.
http://forum.xda-developers.com/showpost.php?p=8182729&postcount=107
Translated by google chrome
Here is how to unlock a phone that has missed its flash Froyo JPC (request for unlock code and displays the correct imei)
New semi automated method available here: http://forum.frandroid.com/forum/viewtopic.php?id=27019
Beware if the imei is not good before you start, it will not be at the end.
This method can also be used to modify the Product Code for those interested
All that was done on'm Android 2.1 since Froyo modifies the files to his liking (I advise to do New JM1, it works very well).
Thank you for everything you read, do not fly the tutorial is very important !!!!! I could not be responsible for those who are mishandling
Before anything else, save the file efs /, we will play with:
http://forum.frandroid.com/forum/viewtopic.php?id=25668
Need to be root, busybox, android sdk available here:
http://developer.android.com/sdk/index.html
(In windows) we decompress the ZIP, it renames the file "android-sdk-windows" to "android" short and placed in c: \ (the name and location to the sdk is placed are important to commands typed by hand later)
Extracting a nv_data.bin:
Plug the phone in usb mode enabled USB debugging
Start => Run => cmd (a DOS window will open)
Tapper to space by:
cd ..
cd ..
cd android
cd tools
adb pull / efs / nv_data.bin
Close the DOS window
The file will appear in the nv_data.bin réperoire c: \ android \ tools.
Edit the file with a hex editor nv_data.bin (EditHexa available in my example here: ... http://www.logitheque.com/logiciels/win a_9903.htm):
188 021 offset (page 3137) to "XEF" (ca will recognize the phone as "naked") (thus change the product code)
Offset 18146E (page 3,083) to "00000000" (ac will put the network unlock code 00000000)
We backup ^ ^
Then we go back in adb ^ ^
Start => Run => cmd (a DOS window will open)
Tapper and point in space by:
cd ..
cd ..
cd android
cd tools
adb shell mkdir / sdcard / efs "
adb push nv_data.bin / sdcard / efs
adb shell
su
mv / efs / .nv_data.bak / efs / .nv_data.bakk
mv / efs/.nv_data.bak.md5 / efs/.nv_data.bakk.md5
rm / efs / nv_data.bin
rm / efs/nv_data.bin.md5
rm / efs/.nv2.bak
rm / efs/.nv2.bak.md5
cp busybox / sdcard / efs / nv_data.bin / efs / nv_data.bin
chmod 755 / efs / nv_data.bin
chown radio.radio / efs / nv_data.bin
If he ever put the radio user does not exist, try "chown 1001:1001 / efs / nv_data.bin" instead and yes for some it is still not the same ....( thank you Froyo JPC / JPH )
There may be errors on. Nv2.bak and md5 (they do not exist at all)
I renamed the. Bak. BAKK to set aside the time everything is finished, they will be erased later.
do: ctrl + c
unplug the phone, remove the battery without turning the phone 30 seconds.
restart (on or before this point we must put the sim)
The network will unlock code: 00000000, it will the code is good but not unlock it anyway. If its not working properly and restart the phone again.
once functional, * # 06 # displays the correct imei
After there are bugs that require reflashing, reflash in New JM1 via Odin with re-partition active (I did not test other firmwares)
Must rooter again (the busybox normally installs with the root) ... and yes again ^ ^
reboot (so the normally nv_data.bin.md5 must have recreated)
Creating the. Bak
plug the phone into USB debugging mode enabled
We return under adb ^ ^
Start => Run => cmd (a DOS window will open)
Tapper and point in space by:
cd ..
cd ..
cd android
cd tools
adb shell
su
rm / efs / .nv_data.bakk
rm / efs/.nv_data.bakk.md5
busybox cp / efs / nv_data.bin / efs / .nv_data.bak
busybox cp / efs/nv_data.bin.md5 / efs/.nv_data.bak.md5
chown radio.radio / efs / .nv_data.bak
chown radio.radio / efs/.nv_data.bak.md5
Ctrl + c
Unplug your phone
and it finally finished your phone is unlocked and working again all operators ... remember to save them now ^ ^
A big thank you to Rickou who brought me on a platter chown radio.radio Chaineau who was missing.
And has Reve40 with whom I studied nv_data.
And Hideki Jis26 who tested the method before it is online.
A remark Hideki:
hideki wrote:
Otherwise I just add details about my case.
So personally I stopped before the stage flashing in JM1 because I had no problem and my bak files were recreated itself at startup.
I tried the following reredémarrer my imei and no problems still, no application code. And like bin files are recreated at each boot from bak, I concluded that my bak was so good .
What greatly simplify the procedure .
This was not the case for me and therefore Jis26 peus be that after the Roma moved to the base, we could have some small variations, I can not say more.
Last edited by helroz (25-09-2010 1:50:37 p.m.)
Thanks for the translation but I found something even better then machine gobbly gook ,
I just found the original post by Helroz - in english on XDA if anyone wants:
http://forum.xda-developers.com/showpost.php?p=8182729&postcount=107
"This method work for galaxy s with damaged nv_data caused by froyo JPC (good imei but unlock code required)
this method is to recreate a new unlock code and allow the phone to unlock with new unlock code
I post this on frandroid with pictures and link for software:
h***://forum.frandroid.com/forum/viewtopic.php?id=26052"
So has anyone tried this method? Is changing the country code "XEF" necessary for unlock? Is that just for changing the product code?
michael.seltzer said:
So has anyone tried this method? Is changing the country code "XEF" necessary for unlock? Is that just for changing the product code?
Click to expand...
Click to collapse
I have yet to try it, but changing the country code is only necessary if you flashed a different international firmware and it changed that.
Ya i flashed to cognition 2.2 so it shouldn't be an issue right?
michael.seltzer said:
Ya i flashed to cognition 2.2 so it shouldn't be an issue right?
Click to expand...
Click to collapse
Not the country code, since you flashed an AT&T build.
when performing the busybox line, I get
cp: write error: No space left on device
Why? I have plently of room on my phone, what is the problem here?
No one has any idea?
Vae Hostilis said:
when performing the busybox line, I get
cp: write error: No space left on device
Why? I have plently of room on my phone, what is the problem here?
Click to expand...
Click to collapse
I ran into this, and i have an answer... took me bit to discover it...
The /efs partition is only about 6MB in size - the nv_data.bin is 2mb. There is a hidden backup file and another file as well that are also about 2mb.
ls -l -a (you can't do ls -la as in linux or unix) will show you hidden files and sizes.
So you probably tried to backup your nv_data.bin in the /efs folder, and then copying a new one over and you ran out of space. Delete the nv_data.bin after you back it up to your SD card, then copy the changed one over.
alphadog00 said:
I ran into this, and i have an answer... took me bit to discover it...
The /efs partition is only about 6MB in size - the nv_data.bin is 2mb. There is a hidden backup file and another file as well that are also about 2mb.
ls -l -a (you can't do ls -la as in linux or unix) will show you hidden files and sizes.
So you probably tried to backup your nv_data.bin in the /efs folder, and then copying a new one over and you ran out of space. Delete the nv_data.bin after you back it up to your SD card, then copy the changed one over.
Click to expand...
Click to collapse
Tried deleting the file in the efs folder, then just copying the file over using root file manager and it still says I don't have enough room. after deleting the file, I have 1.91mb free in that folder. is there anything in there I can toss?
And what does busybox have to do with transfering the file? as in why do i have to include busybox when typing in the command on adb?
Edit: here is the list of files in there in case I have some unnecessary ones.
.android (folder)
---empty
.imei (size: 15)
.nv_data.bakk (2097152)
.nv_data.bakk.md5 (32)
.nv_state (1)
imei (folder)
---bt.text (23)
---mps_code.dat (3)
nv.log (96)
after listing these off, I notice there is a serious math problem here..... how do i have 4.01 mb (according to root file manager) filled?
Vae Hostilis said:
Tried deleting the file in the efs folder, then just copying the file over using root file manager and it still says I don't have enough room. after deleting the file, I have 1.91mb free in that folder. is there anything in there I can toss?
And what does busybox have to do with transfering the file? as in why do i have to include busybox when typing in the command on adb?
Edit: here is the list of files in there in case I have some unnecessary ones.
.android (folder)
---empty
.imei (size: 15)
.nv_data.bakk (2097152)
.nv_data.bakk.md5 (32)
.nv_state (1)
imei (folder)
---bt.text (23)
---mps_code.dat (3)
nv.log (96)
after listing these off, I notice there is a serious math problem here..... how do i have 4.01 mb (according to root file manager) filled?
Click to expand...
Click to collapse
I did all this via ADB shell and i didnt use the busybox command; but i don't see your original nv_dat.bin - that is 2MB. You can delete the bakk file - that was made by some script - i have never seen the OS add 2 K's.
If you want to keep something move it to SD card and then delete from /efs. I know it is the nv_data.bin and .nv_data.bin that are 2MB files - they take up the room in the partition.
Unless you use a terminal and type in the commands - it is hard to tell what the file manager may still be hiding. I haven't used root file manager.
alphadog00 said:
I did all this via ADB shell and i didnt use the busybox command; but i don't see your original nv_dat.bin - that is 2MB. You can delete the bakk file - that was made by some script - i have never seen the OS add 2 K's.
If you want to keep something move it to SD card and then delete from /efs. I know it is the nv_data.bin and .nv_data.bin that are 2MB files - they take up the room in the partition.
Unless you use a terminal and type in the commands - it is hard to tell what the file manager may still be hiding. I haven't used root file manager.
Click to expand...
Click to collapse
I have the .nv_data.bak, the .nv2.bak, and the nv_data.bin in the sdcard folder. I believe the instructions told us to move those out of the efs folder and rename the copies (left in the efs folder) to .bakk instead of .bak, as they were the ones that would be deleted later.
All the files you see, are all the files in there, looking through ADB and the Root File manager app w/ hidden files shown. and the file sizes are not adding up to the total 4 it says I have in there, but I will try deleting the .bakk file and see what happens.
The nv_data.bin is the important one.
With what you listed, you should have about 4mb free, not 4 mb used. If you are in ADB shell you also have the df and du commands to show you how much of the /efs partition is used.
lol. it tells me 4.01mb is used.... sigh.....
Edit: just wiped my phone for the hell of it to see if it fixed anything. All the files are back, safe and sound, and the MATH ADDS UP (Yeay!). I'll try one more time before I give up.
Edit 2: just ordered a replacement device from at&t. I'll just run the Generate Code program on that, hopefully. Thank you for your help!!
So has anyone actually tried this? Does it actually work?
Sent from my SAMSUNG-SGH-I897 using XDA App
How did you get att to replace it?
michael.seltzer said:
So has anyone actually tried this? Does it actually work?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It does work. As long as your IMEI is good. (*#06#). Take a good unlocked nv_data.bin - put your IMEI and unlock/unfreeze codes in it; in the right places. Move it your phone and reboot.
so if i just follow the guide exactly i'll be good? Is there a chance that my phone might not boot up? For some reason my phone can't get into download or recovery mode so i don't want to be stuck.
michael.seltzer said:
so if i just follow the guide exactly i'll be good? Is there a chance that my phone might not boot up? For some reason my phone can't get into download or recovery mode so i don't want to be stuck.
Click to expand...
Click to collapse
with a bad nv_data.bin - it should still boot -but I can't guarantee it. Never tried.
Hacking system files, there is always the chance the phone won't boot. AT&T did it with OTA upgrade.... How bad do you need to unlock your phone -that is the question you need to ask yourself.
Hi Everyone,
Sorry for the discombobulation of this post, but I have been adding to it non stop.
This thread covers all I have learnt from this model phone;
Root procedures for both Gooapple and iorange GT-6
ADB access (no USB adb so need to use over WiFi), - ADB WORKING NOW!!
Secret reset button location,
Recovery mode,
Download mode,
Drivers,
How to (and not to) theme framework-res.apk with uot kitchen
Flash tool
Change Boot animation
Upgrade External storage.
GPS server change.
Battery Info.
Serial No. Location
Quick access to the Camera
Mayiandjay on the Gooapple 3g on Youtube
Creating an extracted system.img
Dump recovery.img / boot.img
Alternate ROM dumping method (Thanks Dastin1015)
Flash a recovery image (Thanks Dastin1015)
Full Market on the Goo
ROOT;
I have purchased one of these and they are quite easy to get root using Visionary+ for temporary root option to push su and Busy Box, then use Z4root for permanent # works quote well and easy and
Checkout the rooting video here (http://www.youtube.com/user/mayiandjay) for an easier way just using z4root.
ADB OVER Wi-FI;
once you can get adb to recognise it (using terminal emulator on the phone
"setprop service.adb.tcp.port 5555"
then
"stop adbd"
"start adbd"
from there you can use your pc to run
"adb connect *insert IP address here*"
UPDATE: I found how to get ADB access over USB... I just insta;;ed the PdaNetA302.exe file from http://www.alcatel-mobilephones.com/global/content/view/full/25287
and then disconnected when advised to, reconnected when advised to, then BAM!!! working ADB..
I wish I had known about this a week ago...
From here you can have access to all supported adb commands including shell for # access, also for pushing and pulling files from the goo,
UOT KITCHEN; (Be careful dangerous)
I used the "ADB PULL" command to pull "/system/framework/framework-res.apk"
from the device, I then used the UOT Kitchen to modify it to my liking once I got the uot .zip file, I extracted the framework-res.apk file and used "adb push" to overwrite the one inside /system/framework/ dir.
(use a pc to push, not the phone explorer copy paste... Lol I bricked mine by using the file explorer, see the rest of the post for more info....)
RECOVERY MODE, DOWNLOAD MODE and BOOT ANIMATION;
some other usefull info is that you do not have to wait for the phone to run dead if you use the wrong key combo whilst booting ( trying to get into recovery hold home button whilst turning on then 5 seconds after "gooapple" appears let go of home and then press it again) you will get recovery console, where you can change the boot animation to the static apple or the gooapple animation, you can also do a factory reset or clear cache, from here you can also run an "update.zip" file but unfortunatly after i 1/2 bricked mine i stupidly did a factory reset and lost rw on /system (loosing bus box and su) (CRAP!!!) i was using the above mentioned method to use the "uot kitchen" to retheme the framework-res.apk file of the goo, and it was working fine when pushing the framework-res.apk to the phones /system/framework/ dir using a pc, but I got lazy and stupidly did a copy / paste using the phone to return to the original framework-res.apk (i know dumbass right) and then she rebooted to infinate bootlooping (F#@K!!!) I can now get into recovery mode and unfortunatly I cannot get my update.zip that pushes busybox and su etc to sign properly so that I can copy via update.zip the backed up version of framework-res.apk back to the now read only /system/framework dir.... (possible Brick anyone?)
SECRET (hidden) RESET BUTTON;
So... continuing on... to reboot the phone if it locks up and stops responding, you need either the original simtray pin or something like a multimeter probe and stick it down the headphone jack, down there there is a hard reset button, (get a torch and look for yourself if you don't believe me) hope this helps people...
DRIVERS;
Also I downloaded the qualcomm MSM drivers from 4shared and can now connect to the phone cos I noticed that if you boot the phone using the down volume key (i think) with the USB connected you can get nothing come up onscreen on the phone but the PC picks up a new device, the 4shared drivers worked but unfortunately that's where my knowledge stops...
FLASH TOOL;
I downloaded the flash (or google translated "brush") tool from mobileuncle but untill I find someone sharing the rom, or system.img it is usless to me...
UPGRADING EXT. STORAGE;
Something interesting for the rest of you is that the Gooapple 3g ( shows as A4-3G) and the preproduction iOrange Gt-6 (also shows as A4-3G) seem to look the same on the inside, I have both ( but liked the good ol F#@K you Apple, with the apple eating an android boot animation and apple in a android symbol on the back of the device ) I have opened both of them up (use a very small screwdriver on the screws between the speakers and 30pin dock connector on the base, remove these screws and slide the back plate up towards the power button (gentle no to break the retaining nuts on the back plate), from here you can undo the bit of tape and lift the battery up out of the way ( its soldered in so be careful, seeing as its always powered and easyier to short something out ) then next to where the battery sits you will see the back of a micro SD card (this is you external storage) if you get your nail and press on the back of it you will notice it is held by a spring retainer and will pop out a bit, from here press it in half way again with your nail and slip your nail off it, releasing the spring tension, flicking the micro sd card out into the casing (and hopefully not across the room)
you should now find either a 4GB, 8GB, 16GB or possibly a 32GB micro SD card came out depending on the model you chose, if you chose a 4GB or 8GB like i did you can replace it with an inexpensive 16GB Micro SD card put it back together and reboot, This is how I have tried copying my "update.zip" with Busybox and Su files (see above, that wont sign!!! GRRRR) the recovery console recognises the file but says signature authentication fail....
I could sign my "update.zip" for my framework-res.apk file but without Busybox or system RW it is useless.. it passes authentication but without rw on system it is useless....
GPS SERVER CHANGE;
Also, using faster fix off the market (need root) you can change the GPS server for better GPS performance.
BATTERY INFO;
Stamped on the Battery is
PL402874 1000mAh
3.7V 3.7WH
SERIAL NO. LOCATION.
Under the back cover there is a Version (mine is v2.3) and Serial number sticker
QUICK ACCESS TO THE CAMERA
Double click Home on the unlock screen to have quick access to the Camera.
USEFUL YOUTUBE VIDS
Check out mayiandjay on youtube (http://www.youtube.com/user/mayiandjay), he has done videos covering the stuff I am trying to explain, Thanks deepakpitrola333 for pointing this out
CREATING A EXTRACTED SYSTEM AS SYSTEM.IMG
for windows pc,
Go to http://db.tt/GAyvuDE (thanks Dastin1015) download and extract to your sdk/platform-tools folder
Rename mkfs.yaffs2.arm to mkfs.yaffs2 (delete the .arm extension)
open up command prompt (if you don't know how to do this in your current windows environment by now then just give up now)
change dir to the platform-tools dir in the sdk,
TYPE: adb push mkfs.yaffs2 /data/misc/mkfs.yaffs2
then pick up your shinny gooApple device;
open root explorer and navigate to mkfs.yaffs2 select and hold, change to have execute permissions
Back on the PC;
adb shell
su
# cd /data/misc
# ./mkfs.yaffs2 /system /sdcard/system.img
# exit
adb pull /sdcard/system.img ./system.img
I got a 176Mb system.img with "Build ok."
DUMP RECOVERY and BOOT IMAGES
you'll need dump_image from http://db.tt/9EANtEX (Thanks Dastin1015)
copy to your platform-tools folder in your androidsdk dir
do the same as above and push to /data/misc
then as before, change permissions of dump_image in root explorer to have execute. reboot device
Then you can run command prompt
go to your sdk platform-tools directory
run;
adb shell
cd data/misc
./dump_image boot /sdcard/boot.img
./dump_image recovery /sdcard/recovery.img
exit
adb pull /data/misc/boot.img ./boot.img
adb pull /data/misc/recovery.img ./recovery.img
ALTERNATE ROM DUMP METHOD (Thanks Dastin1015);
To do any flashing to the phone you must be rooted.
Rooting:
1) Download z4root and hit the permanent root option: http://db.tt/Bltsa73
2) Once rebooted you will have root.
Dump ROM:
~Prerequisite is that you have root~
{Non ADB method}
1) Download romdump and place it on the root of your SD card: http://db.tt/kXTaCDF
2) Download Terminal Emulator from the Market if you haven't already.
3) Open Terminal Emulator and issue these commands:
Code:
$ su
# cp /sdcard/romdump /system/bin
# chmod 747 /system/bin/romdump
# romdump
4) Now on your SD card under the romdump folder you will find you recovery.img, boot.img and system.tar. Backup these files to your computer for safe keeping.
{ADB method (Must have Android SDK installed)}
1) Open up command prompt and issue these commands:
Code:
C:\Users\Your_Name> cd ..
C:\Users> cd ..
2) Navigate to your installed Android SDK (Mine is under the Program Files (x86) folder):
Code:
C:\> cd Program Files (x86)
C:\Program Files (x86)> cd Android/android-sdk/platform-tools
3) Connect your device to your computer and make sure you have USB Debugging enabled on your phone.
4) Issue this command to verify that your computer recognizes your phone:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb devices
5) If you see your phones serial then it is connected.
6) Download romdump and place it in the platform-tools folder: http://db.tt/kXTaCDF
7) Issue these commands:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb push romdump /system/bin
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell chmod 747 /system/bin/romdump
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell
# romdump
you should get the following;
Android ROM dumper v0.82b
(c)2011 Sebastian404
Device : GOOAPPLE 3G QUALCOMM-Android2.2.3-IOSUI-eng.autobuild.20110729.144151
Creating required files... done.
Opening mtd table... done.
Dumping kernel config... done.
Dumping boot partition... done.
Dumping recovery partition... done.
Dumping system partition... done.
Creating Checksums... done.
Cleaning up... done.
8) When done your ROM dump will be in the romdump folder on your SD card.
/sdcard/romdump
boot.img
checksum.md5
config.gz
recovery.img
system.info.gz
system.tar
DONE.
INSTALL CLOCKWORK RECOVERY (orange lantern recovery) ( Tested on my GT-6, that is basicly the same as the gooapple but has the apple symbol on the back, and now my Gooapple 3g,both successfully)
Flashing custom recovery image:
{Non ADB method}
1) Download flash_image and place it on the root of your SD card: http://db.tt/flHRxiG
2) Download recovery.img to the root of your SD card: http://db.tt/uy56zhj
3) Open Terminal Emulator and issue these commands:
Code:
$ su
# cp /sdcard/flash_image /system/bin
# chmod 747 /system/bin/flash_image
# flash_image recovery /sdcard/recovery.img
4) If you see a bunch of successful on your screen then it has flashed properly.
{ADB method}
1) Open up command prompt and issue these commands:
Code:
C:\Users\Your_Name> cd ..
C:\Users> cd ..
2) Navigate to your installed Android SDK (Mine is under the Program Files (x86) folder):
Code:
C:\> cd Program Files (x86)
C:\Program Files (x86)> cd Android/android-sdk/platform-tools
3) Connect your device to your computer and make sure you have USB Debugging enabled on your phone.
4) Issue this command to verify that your computer recognizes your phone:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb devices
5) If you see your phones serial then it is connected.
6) Download flash_image and place it in the platform-tools folder: http://db.tt/flHRxiG
7) Download the recovery.img and place it on the root of your SD card: http://db.tt/uy56zhj
8) Issue these commands in command prompt:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb push flash_image /system/bin
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell chmod 747 /system/bin/flash_image
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell
# flash_image recovery /sdcard/recovery.img
9) If you see a bunch of successful on your screen then it has flashed properly.
boot into recovery, hold home whilst powering on, after 5 long seconds, let go of home and then push home again, you will need to put the volume/menu-back toggle to "volume" mode and according to deepakpitrola333, you need to cycle the list 3 times using volume to allow selection.
Video by mayiandjay;
http://www.youtube.com/watch?v=B_dX9Ruoljo
ENABLE FULL MARKET ON THE GOO
Thanks to Smith, we can have the full google market on our Goos
http://forum.xda-developers.com/showthread.php?t=1133702
IF I OR ANYONE ELSE EVER HELPS YOU, PLEASE CLICK THANKS... Its not that hard....
Done.
CHEERS!!! - KEG.
Thanks for info on the gooapple, its good stuff.
Any idea on how to do any of the following:
- restore original recovery screen
- get a clockworkmod recovery image to work
- do a nandroid backup
i have managed to get the applestyle home apks and the keyboard and stuff and so want to install another rom. I flashed a random clockworkmod image but now i dont get any recovery screen at all, its gets stuck on apple every time on every button combo/method.
if its not too much to ask, could you check if you can run fpse the psx emulator on your gooapple, it crashes to home straight after loading a game even tho i have a bios. psx4droid works but is choppy, similarly specd phones like the wildfire s and legend can play fpse games like ff7 very well.
Gooapple GPS
Do you now how to acivate the GPS on the gooapple.
Have this phone a GPS chip like SiRF III chip?
Is it possible to use it with navigation software?
Did you purchase it? If you did that, please, send me link to rom dump after you dump it or you know already existing link?
Sent from my IDEOS S7 Slim using XDA App
this phone has a sirf III and installing a gps program makes the gps work.
i cant dump the rom without getting a clockworkmod recovery image that works for this phone, unless you know of a way jon2555.
Hey guys, the best way I found to toggle gps on (because it does not show up in networks) is by installing go launcher so you get a shortcut to it in your apps, the press home and set applestyle as default again, then go through your drawer and select the go launcher shortcut, from there add the power control widget, from there you can toggle gps...
Also I have been nagging the people at the gooapple factoryand they advised they may add a downloadable firmware upgrade soon...., fingers crossed as mine is currenly half bricked, I got access to the fastboot by downloading the microsoft mobile drivers update, that lets fastboot recognise it when you reset with the vol down button, but need to read up on how to use it....
I had a quick readup on fastboot commands, and I have written an update script (The one that I cant sign), and I'm going to try to run it with fastboot as my limited and unexperienced understandung is that through fastboot you dont need signed updates...., unfortunatly I left my goo at work on wednesday and I was in Sydney all day today, so i wont be able to try it out untill I return to work in freezing Canberra tomorrow... Fingers crossed, and if I can successfully get it working again I will try to find a way to dump the partitions and make an update.zip that rewrites all of /system (if possible), so next time i kill it, I may have a better chance recovering from my mistakes (or pure lazyness....)
jon2555, no rom yet, but Hat007 did previously do an app dump of all the apps on gooapple 3g here,
http://forum.xda-developers.com/showthread.php?t=1245655
(thanks hat007)
and as deepakpitrola333 said, until somebody can put a working clockwork on it, we are out of luck regarding nandroid backups.... and my goo is currently bricked so i cant do much with it, and i gave my gt-6 to my daughter already, so no chance of getting that back......
Gooapple Firmware ROM Update
Hi All,
I'm New to this. Is there going to be a ROM or Firmware Update? if so how is it going to be done? Which Website??
I've bought mine from Android-Sale.
Has anyone else bought there's from Android Sale?
Also Is there a FIX to Make the Unlock Slider Back to English without the Stupid Chinese Symbol TXT??
Also Is anyone having Trouble with there Built-In GPS?? I cant get mine to Work??
I Look Forward to your Comments.
Cheers.....
hey spookie,
kegatron has said to toggle the gps from go launcher, which enables an android style interface with power options for bluetooth, gps, wifi etc by widget or otherwise. I assume you can do this with the stock froyo launcher too.
Home key can select the launcher after a third is installed.
I got mine from fastcardtech as they gave a discount over android sale, however it will be gooapple themselves releasing the update and or rom in the future.
With so many units sold, there is gonna be stuff up soon.
If someone knows how to make thier own clockworkmod recovery, the rom can be uploaded by anyone with the phone. I have no clue who to ask to do this tho.
The chinese in the lock screen is not something i know how to change but as i said a stock froyo launcher and lock screen can be used instead. Helps with the long icon name problem too.
If its not too much to ask can you check if fpse, the psx emulator, works on your phone. It crashes straight away on mine but all psx4droid versions work but as it is known, psx4droid is considerably slower, like 10-20 fps slower making final fantasy games run 50fps max and 35-40 normally which is too choppy.
I hope what i have said helps, gps isnt on all the time so try to toggle it like keg said and if you know anyone who can write custom recovery images, get them over here
i also assume you have rooted to get rid of all chinese from system icons/folders
Hey Spookie,
With the GPS, I was still using the applestyle launcher but one of the good things about go launcher is the fact that it has a app link in your app drawer, meaning you can select the applestyle launcher as the default and still have access to go launcher without too much hassle (just select it in the apps on your home screen)
So with that said I assume you have root?, if not... get it... Lols..
from there you can get rid of the standard Chinese crud that I cant read like baidu input or whatever its called, QQ (whatever that is...) etc. using Titanium backup (CAREFUL FOR WHAT YOU UNINSTALL, and batch backup everything first!!!), I'l put up a list of what can be uninstalled safely once I get mine working again. and you can fix the server your GPS is looking for by using FasterFix from teh market (you need root for this)
And the gooapple webpage is quite easy to find.... I just googled gooapple and funnily enough the webpage's name wasn't too cryptic (its www.googapple.com lol) just use the google chrome browser to automaticly translate the Chinese and for most of the bad translations you can still work it out..
Hope this helps...
BTW, I'm looking into rewriting my update.zip file for my framework-res.apk file as the scripting is different using fastboot and I need to read up on it.. give me time
I need to work out what needs to be in the android-info.txt and android-product.txt files....
Hi Guys,
Thanks for all you Help & input.. However I'm Very Confused and Lost?? Yes I've installed Z4Root.
But Now That I've installed this App. How can I BACKUP the Whole ROM as it is before I Start to Uninstall all thoses Chinese APPs etc??
Also What Input Keyboard do I install? Which one is the Chinese Keyboard??
I'm Wanting to keep the Stlye of the Phone as it is when I bought it but wanting to Take Out the Chinese Junk, and Install just want I want in English.
As for the GPS, is there a Way to Keep it always Switch on From First turning on the Phone??
I do hope you dont think I'm a Stupid Person??
I dont want to Brick or Destroy this Phone?? Just want the Chinese Junk Out and GPS & the Unlock Slider Fixed?? Do hope they Bring out Firmware or ROM Update? I'm picking it's going to be on here once it's Relesed??
Look Forward to your Comments.
Regards
Spookie...
Gooapple Camera & YouTube
Hi Again,
I was meant to also ask in my Last Post
Can anyone if Possible post a Photo on here taken Directly off there gooapple device? Ans is it a True 3.2mb Camera? And Also is the Front Camera 1.3mb?? I'd be glad to have a look and you image....
I cant get youtube to work with the Youtube App? I've tried all sorts of Differnt Apps (apk files), and still NO Luck with youtube??
Any Thought's Or Comments??
Thanks...
SpookieNZL
Hey Spookie,
Sorry champ, if I misdirected you, what I ment by batch backup all the apps first was to do with "Titanium Backup" from the market, it requires root access
to test for correct root access, you should get # when you type su in a terminal emulator.
try this once you have it installed,
Download the Iphone keyboard from the market, the go to settings, keyboard, and enable the iphone keyboard (tick box) then, find any text box and press and hold the box untill "input method" comes up select iphone keyboard
Once you have the iphone keyboard working, you can then delete the baidu (or whatever it was called) keyboard, by opening Titanium backup, accept super user access, then go to "backup / Restore" then press the menu key (vol up) then select "Batch" then select "backup all user apps +system data", then once completed, you can then go back to "backup /restore" and find Baidu input and select it, and then "uninstall"
Congrats you have now deleted the Baidu input,
I would recommend NOT uninstalling anything that you don't know if it is crucial or not, as if you delete the wrong thing you can get major "Force close" issues and make the phone 100% unusable until a ROM has been released to re-write the partition and start again...
With the Camera, I will post a heap of photos up when I get mine working again, I have taken lots of photos of pulling it apart and upgrading storage etc. I am in the progress of putting all the info from this post into a full guide with photos of step by step how to do everything that I know of, as I can't find anything from anyone else posted on the net regarding most of the things i have covered, I might just step up to the plate and do it
With Youtube, I installed the tubemate app from market, worked fine for me.., try it an let me know
Hope this helps!!!
Also, for those who didn't know, when you have the slide to unlock screen, if you double click home you will get a camera icon pop up (on an Iphone / ipod this is to access the music menu) that way you can get quick access to the camera to take a photo
hey keg why are you telling him to uninstall baidu input, on its last setting it is a perfect iphone input keyboard completely in english, the one on the app market is not good looking or accurate.
also, on youtube this guy, mayiandjay, has good videos on some of the stuff your trying to explain so maybe skip this to save time.
lastly i hope you get your phone back to working, as i have the phone working and sort know what im doin, feel free to ask for anything from it.
spookie, ill get some daylight pics up in the morning, at night the camera looks more grainy but is still good.
Hi deepakpitrola333,
Sorry I never really gave the Baidu input a real go, I found it slow unresponsive, and sometimes would revert back to converting whatever I was trying to write into Chinese, so it got the ass, I did get swype working on it, but I'm used to my Galaxy S and didn't find it that good on this device.
I suppose my guide to deleting the Baidu input was reversable if you did it step by step, you can go into titanium backup, go to backup / resore, and go right to the bottom, select baidu input that should have a line through it, and select restore.
BAM!!! Bauidu is back, though you will have to enable it again through the keyboard s option in settings, then press and hold a text box and select it again....
Sorry for the confusion.
yea it took me a while to set it to how i like, iphone style full english with predictive, wild guesses from the options list when holding down the circle key.
it is faster than the 4-5 keyboards ive used and looks the best in caps with no numbers to ruin the look.
it wont help you keg because yours is unfortunately bricked but spookie, on baidu after getting the keyboard up (press home a few times), hold the circle (world?) key, then select last, (keyboard will close) then hold bottom left key after getting it back up then first option, then second to last for predictive or last for non predictive.
Got the Goo Going again!!!
WOOOO!!! I'm soo happy
here's how I did it, (and I will add this to the first post)
When my device was bootlooping (the gooapple animation was playing over and over) I connected it to my computer, noticed that once again I got the unknown devices (4x qualcomm HSUSB interface) pop upagain and after giving up trying to find the Qualcomm HSUSB Driver prviously I decided to go on the hunt as this was close to my last resort before giving up for the day, well guess what!! I found it!!
I downloaded a file called PdaNetA302.exe and it installed the correct drivers for me!!! from there I could finally see the device in the Android Debug Bridge (especially whilst it was was booting!!) from there I could push the framework-res.apk into the /system/framework/ dir on the goo!!! WOO HOO!!
I'l play with it for a while and start ripping everything off it tonight, see what I can do about making a backup of some sort.... or if anything a listing of all dirs and files in each partition.
Thanks everyone who is reading this for your support during these "goo-less" times
Hi! I am the youtube member "mayiandjay" that has been posting some videos on how to work around with the gooapple 3g.
Recently I tried flashing clockworkmod recovery but now I get stuck on the "gooapple" logo.
How can I restore the original recovery Image or get one that works for this unit. ANY HELP WILL BE GREATLY APPRECIATED!! THANKS IN ADVANCE.
Hi! I am the youtube member "mayiandjay" that has been posting some videos on how to work around with the gooapple 3g.
Recently I tried flashing clockworkmod recovery but now I get stuck on the "gooapple" logo.
How can I restore the original recovery Image or get one that works for this unit. ANY HELP WILL BE GREATLY APPRECIATED!! THANKS IN ADVANCE.
Hi all,
I ordered the U8350 as a Chrsimas gift for my girlfriend. I ordered it in Germany, as it is cheaper than in France.
Unfortunately after unboxing i had the bad durprise to notice it can only be configured into German or English .... Using MoreLocale2 i managed to activate French.
Now comes the Huawei IME, it can only be configured into German or English ...
Does somemone know how i can change this ?
The ROM is a stock Huawei one, no branding of some sort ...
Android : v2.2.2
Base band version : 22201010
Kernel Version : 2.6.32.9-perf
Build # : U83500V100R001C253B650
Thanks in advance for your help !
I decided i will try to flash the French Bouygues ROM as it is close to stock one, root the phone and get rid of the Bouygues crap ....
BTW i hope this will not SIM lock the phone ....
At least,but not at last i made a "bot" which scan the Huawei website for U8350 ROMS and this is what it found so far .... (As i can not post links i attached a text file with the links)
Since i was not able to download the Bouygues ROM i continued to search and ended up here : h t t p://android.modaco.com/topic/344529-recovery-clockworkmod-recovery-for-orange-barcelonahuawei-u8350/page__view__findpost__p__1863793
Now i can have French without the need of third party app like morelocale2, but still no French for the Huawei IME
OK i managed to turn my German U8350 into a full French one, inclusive Huawei IME ... I do not know if what i did is the proper way, but at least it worked for me ! I think i will describe the steps, might be useful for others ....
Bear with me, some of the steps i did were just "Try and fail" as i am a totally newbie regarding android ....
Warning, you will lose all your apps, data etc by following this steps ! Be sure to backup everything before ! As always if you break anything it is YOUR fault
Prerequisite
Android SDK with platform tools ...
Know how to get into ADB shell and basic NIX commandline knowledge ...
A rooted U8350 !
To root the phone I used SuperOneClick (ht t tp://shortfuse.org ) and clicked on "Shell Root", simply clicking "Root" would'nt get me root in the ADB shell, if someone can explain me the difference between both ....
Enabling other languages other than German and English
Open a shell to your phone and remount the cust partition as read/write
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock8 /cust
Exit the shell by typing exit and enter
Now pull out the file hw_defaults.xml to your computer.
Code:
adb pull /cust/[B]2020/de[/B]/xml/hw_defaults.xml c:\hw_defaults.xml
Important Note : I figured out by try and fail that this is the file that gets loaded on startup, if at the end you do not succeed try another one like
Code:
adb /pull/[B]wind/gr[/B]/xml/hw_defaults.xml
.
One your computer edit the file (i recommend using Notepad++), it should be located at the root of your C drive. Maybe it is not bad to keep a backup of the original file.
Delete the line
Code:
<string white_languages="de_DE,en_DE,en_US"/>
, from my understanding this line restricts the available languages.
Now push back the file to your phone
Code:
adb push c:\hw_defaults.xml /cust/2020/de/xml/hw_defaults.xml
Reset your phone to factory settings and wait for the "First Run Wizard" to appear. It will still be in german but when pressing the "Sprache Auswählen" button you'll get all the languages Froyo supports ! If this is not the case you should try an other file i.e a file which is an other folder under the /cust partition...
Enabling all languages for the Huawei IME
You first have to re "Shell Root" your phone and then remount thr /cust partition as read/write
First pull out the following file to your computer :
Code:
adb pull /cust/[B]2020/de[/B]/prop/local.prop c:\local.prop
(same applies here the 2020/de might no be the correct one on your phone)
On your computer edit the file so that it looks like this (changed items are marked bold)
Code:
;Version string display on screen
ro.build.version.incremental=C253B650
ro.build.description=U8350-user 2.2.2 HuaweiU8350 C253B650 release-keys
ro.build.fingerprint=Huawei/U8350/hwu8350/U8350:2.2.2/HuaweiU8350/C253B650:user/release-keys
ro.build.display.id=U8350V100R001C253B650
ro.confg.hw_appsbootversion=U8350V100R001C253B650_APPSBOOT
ro.confg.hw_appversion=U8350V100R001C253B650_KERNEL
ro.confg.hw_appfsversion=U8350V100R001C253B650_SYSIMG
# huawei add prop
ro.config.hw_opta=[B]999[/B]
ro.config.hw_optb=[B]999[/B]
ro.config.bt_name=U8350
# DTS2011021204283 zhangyang 20110214 begin.
ro.config.backLightTime=15000
# DTS2011021204283 zhangyang 20110214 end.
ro.product.locale.language=[B]fr[/B]
ro.product.locale.region=[B]FR[/B]
#<DTS2011010703296 GPSXtra hanxiuhuan 20110107 begin
ro.config.xtra_support=true
# DTS2011010703296 GPSXtra hanxiuhuan&q170606 20110107 end>
ro.config.qwerty_type=de
ro.config.hwft_MatchNum=7
push back the file to your phone
Code:
adb push c:\local.prop /cust/2020/de/prop/local.prop
Factory reset the phone and you should be gretted by a French speaking wizard ! Going into the settings, the Huawei IME will display all possible languges !
Now i am ready to give my girlfriend a full french phone for Christmas ! This is what i call last minute !
One question still remains the cust partition is filled with lots of operator customisations, mine had the following :
Code:
wind
2020
channel
freemobile
crazyjohn
digitel
hw
lost+found
agoradmt
Does someone know how to get an other loaded by default ?
Hello Max,
What do you have on freemobile customization?
I had a look, but on mine I just got one (bytel).
Would you copy your customizations?
hello all,
this recovery is not ported by me, xda's senior member fun_ have ported this to many devices, and we using the one which is compatible with paladin, many many thanks to him, a link to original thread is here
requirements:-
1. a rooted phone, you can root your tab here
2. cwm recovery image which you can get here
steps:-
1. open file manager which can have root access
2. go to system and rename recovery.cpio.img to recovery.cpio.img.bak
3. put downloaded recovery in /sdcard
4. open terminal emulator
5. type su
6. type "inand_flash_image recovery /mnt/sdcard/recovery.cpio.img" (if you have put it in flash then replace sdcard with flash)
7. then boot into recovery by holding menu and power button together or by typing "reboot recovery" in terminal emulator
how to control recovery:-
# power button is used to select options
# menu button will take you up
# home button will get you down when pressed
some notes you should keep in mind:-
1. back button do not work in recovery
2. never try the key test option else you will get stuck
3. backup do not work for boot, xboot, mbr areas
4. do not flash any rom available for paladin, basic etc. devices (or you will have a hard bricked tablet)
a simple step to enable on-screen back button
as soon as you booted into recovery, press menu then home then again menu, a message will appear saying enabled ( can be done in every screen)
Cwm
Nt able to rename recovery.cpio.img to recovery.cpio.img from andro zip, es file explorer,terminal . . ? Any solution?
in terminal type
Code:
su
mv /system/recovery.cpio.img /system/recovery.cpio.img.bak
dheeraj (dhlalit11) said:
in terminal type
Code:
su
mv /system/recovery.cpio.img /system/recovery.cpio.img.bak
Click to expand...
Click to collapse
failed - read only file system . . . ? . . Any other way to rename this file
pbhasin21 said:
failed - read only file system . . . ? . . Any other way to rename this file
Click to expand...
Click to collapse
tab is not rooted root it first
http://forum.xda-developers.com/showthread.php?p=29100664
dude i followed ur steps, used root explorer to rename to bak, and then tried, i get kcrc32 file size not same. and then when i boot to recovery the whole screen goes berzerk with curtain falls and doesn't do anything. i renamed the bak file into normal and flashed it and got the old recovery.. could you tell me what im doing wrong? used your recovery.cpio.img 3.5mb file in my sdcard... doesnt work..
rooted karbonn smart tab
kcrc32 not same is normal
did the terminal flash the recovery 2 times
like:-
kcrc32 not same
then a hex address
flashing from /mnt/sdcard
kcrc32 not same
then a hex address
flashing from /mnt/sdcard
if you get something like above then it is flashed properly
dheeraj (dhlalit11) said:
kcrc32 not same is normal
did the terminal flash the recovery 2 times
like:-
kcrc32 not same
then a hex address
flashing from /mnt/sdcard
kcrc32 not same
then a hex address
flashing from /mnt/sdcard
if you get something like above then it is flashed properly
Click to expand...
Click to collapse
yup i got it twice, kcrc32 not same.
then i entered reboot recovery. thats when the screen goes all curtainfall like a crash, and recovery doesn't load. i had to use the reset pin and power button to turn on the tab again.. perhaps the img is not compatible with my tab?
btw mine is Karbonn Smart Tablet 2.
http://ncarry.nimbuzz.com/karbonn/product.php?product_id=2212
but when i purchased, it came with android 4.0 ics. everything else is same as in that page..
it is different
and I think that's why recovery is not booting
any suggestions mate? perhaps another ainol tab is similar to karbonn st2?
What if there is no "recovery.cpio.img" file in the system folder? This is after having root permissions...nothing has been done otherwise. I do not have a recovery file to rename and am unsure if it should still go in the system folder or not. It doesn't even have a file extension (I had to transfer it to my laptop just to check, and there's no .img or .zip...nothing.)
Also I keep getting the following message in terminal emulator when attempting to run the command:
sh: inand_flash_image: not found. The image file is in the /mnt/sdcard/Download folder. The full instance is:
[email protected]:/ $ su
[email protected]:/ # inand_flash_image recovery /mnt/sdcard/Download/recovery.cpio.img
sh: inand_flash_image: not found
127|[email protected]:/ # inand_flash_image
sh: inand_flash_image: not found
Any help?