Non - OC ROM's - Galaxy 3 Q&A, Help & Troubleshooting

What non - OC ROM are you using and what's the best non - OC ROM you've ever used?
Also answer the questions if you use OC ROM's.
Sent from my GT-I5800 using XDA App

I use the non-oc version of VIVEK's ROM v5.2 JPU. It's fast and the battery last more due to the latest fix made. If you want fast go for Kyrillos' ROM v9.3 JPU non-oc version.
For faster roms get the oc ones of each rom, but i don't recommend as the higher frequency will stress you cpu.
Try ether one and you will chose the one that sits you the best.

Absolutely kyrilos v9.3 + G3MOD v2.2.2 OC (with SetCPU)
but you can always use the Non-OC version of this kernel

non-oc than oc good

well i ve used many custom roms ..but i m on stock now with g3mod oc kernel .....

Related

[Q] which latest ROM to use on I5801, and avoid battery drain?

I'd like install an good ROM ..
I currently downgraded from froyo to 2.1 eclair because foryo drained my phones battery very very fast
I'd like to know which ROM to use to have, like all features of froyo and which would give me two benefits : Low Battery Use and Faster Working..
plz can some help?
i am not much pro in these things..
First tell me how's your battery on Eclair? I predict you are using the stock eclair. Am I right?
In my view you should use any good modded ROM like Indroid, kyrillos, G3mod etc all these have nice speed + battery backup, our
you could try Destiny ROM as it claims stability and batt backup over performance.
If you prefer stock then try the deodexed stock roms.
As you have specifically mentioned that you are not a pro, there is a possibility that you are getting low batt backup because you haven't calibrated your batt after flashing the new ROM.
I advice you to deliberate the batt or run few cycles of full charge & discharge after flashing any new ROM.
Best of luck..
Sent from my GT-I5800 using Tapatalk
I've just downgraded .. so now currently charging it up .. lets see what happens..
What i hate specifically about eclair is that we can't install apps on sdcard
btw can plz tell.. what is OC version and non-OC version..
I have I5801 .. ie 667mhz phone and no GPU..
which one should i install?
also, if i install like Kyrillos ROM.. will i be able to install Froyo or Eclair back if i want to?
satishynd said:
I've just downgraded .. so now currently charging it up .. lets see what happens..
What i hate specifically about eclair is that we can't install apps on sdcard
btw can plz tell.. what is OC version and non-OC version..
I have I5801 .. ie 667mhz phone and no GPU..
which one should i install?
also, if i install like Kyrillos ROM.. will i be able to install Froyo or Eclair back if i want to?
Click to expand...
Click to collapse
OC version is Over-clocked version and Non-Oc is Non-Overclocked version...
In OC version The kernel is tweaked and modified to give a higher performance..
and increase in the CPU freq....(i.e. 800MHz,1000MHz,1200MHz etc)
Non-OC version includes the Same 667mhz cpu freq....
OC gives u better performance as system gets very fast ..but it has its own Disadvantages.....
It's upto you to select OC or NON-OC version.....
If you are happy with the phone response and speed in Its UI then try Non-OC...
and if u want More performance then Try OC one.....
But Read each and every Risks that exists with OC
http://forum.xda-developers.com/showthread.php?t=1266712
OC= over-clocked
Non-OC= non overclocked
I personally recommend you to flash the OC version, a unlike UN the non-OC version you have an option whether to overclock (eg- 1000 to 1200MHz) or you can just set the max speed close to the default clock-rate (eg-700-800MHz). & If u choose the OC version keep your calm & use the overclocking when you need it.
& yeah you can almost always revert back to your eclair when you wish.
I would also recommend you to use apps2sd by partitioning you're sd-card.
Best of luck
Sent from my GT-I5800 using Tapatalk

Any good kernel out there for miui? For ocing and uv

Running miui now and looking for oc/uv kernel any recommendations....
i use the CWM community kernel.. OV to 1.4
1.6 makes the phone reboot sometimes

[Q] Overclocking without new kernel?

Hi. I want to overclock my i5800 but i don't want to install new kernel. I tried CM7 ROM and I liked more the original one.
So... Have any possibility to overclock without install a new kernel? Or... Install a kernel with ONLY a modification to overclock.
Since you are using CM7, you also have a new kernel.
The new kernel was required to make CM7 work.
If you also have Update 1 for Alpha 6 installed, I believe you can Overclock to 100 MhZ.
Dympy.
No. I'm not using CM7, I using a original ROM from samsung again. CM7 has a lot of fails at the moment.
I rooted my phone, so I can install kernels. But I don't want to change all kernel, only I wanted to overclock the CPU. It is possible? There is a kernel with the only change is the overclock?
First, you should flash new kernel ( recommend g3mod v2.2.1 OC). Then, install setcpu for OC. And link to download g3mod:
Code:
g3mod.com/g3rm/index.php?about=none
Yes, I know that if I install new kernel like g3mod I can overlock, the question is about don't change the original kernel....
Or the possibility to modify the original samsung kernel to ONLY open the possibility to overclock.
as far as my knowledge u wont OC ur process without install the kernel which supports over-clock...
You are saying that you want to drive a car at 400kmph but you don't wanna drive a veyron, and that's impossible
To overclock, you need to make some changes in the kernel, although it is possible to have a kernel with nothing more but overclocking, but why don't you use fugumod or g3mod.
I tried the CM7 ROM. And I don't liked the menus, the aspect, and the power button functions. I like how is from samsung, only I want more speed on CPU
I'm looking for the same solution! I like the original Samsung ROM, but I really want to overlock the CPU! I used Kyrillos' ROM v9.4, but I was not satisfied with it, so I've reinstalled the original ROM.
So pros, please give us a solution!
Milho said:
I'm looking for the same solution! I like the original Samsung ROM, but I really want to overlock the CPU! I used Kyrillos' ROM v9.4, but I was not satisfied with it, so I've reinstalled the original ROM.
So pros, please give us a solution!
Click to expand...
Click to collapse
Flash a oc kernel with odin and keep your stock rom
Sent from my GT-I5800 using xda premium
on my test mobile I have installed the XXJPU stock ROM
flashed the G3 performance 1.9 kernel, works perfect
by default the kernel runs at 800MHz
install setcpu (root required) and you can adjust the cpu
so in two words:
stock ROM with stock kernel -> no cpu adjustment possible
stock ROM with other kernel -> set your cpu in a range you like

[Kernel List] HTC Doubleshot Kernels. February 21, 2012.

Kernels for the HTC Doubleshot. I'll update, and make it look more nice later. I put some time into this, so hopefully it's used. If there's any Kernels I'm missing, or info that's wroung let me know. Now I give you the First
::HTC Doubleshot Kernel List::
Basic Terms:
Undervolt (UV): An Undervolted Kernel is a Kernel that's supossed to bring in Battery savings. The higher the Undervolt, the better the battery savings. But this isn't with out drawbacks. Some CPU's can't handle higher Undervolts. So you'll have to figure out if your CPU can handle it. This can be done by starting at the highest UV, then see if it causes issues. If so, drop to the next UV (8%, 5%, 2%). If no issues (Like Reboots, Blackouts, etc.) Enjoy the UV.
Overclock (OC): This is simple, it's just making yours phones CPU go faster than it comes stock. Our device has a Qualcomm® 8260 dual core Snapdragon™, 1.5Ghz (But shipped at 1182Mhz). So an OC would be anything higher than a 1.2Ghz (Really 1.5Ghz). With an Adreno 220 GPU.
GPU: A graphics processing unit or GPU (also occasionally called visual processing unit or VPU) is a specialized electronic circuit designed to rapidly manipulate and alter memory in such a way so as to accelerate the building of images in a frame buffer intended for output to a display.
For the less geeky, it controlls anything based with graphics.
Icecream Sandwhich (ICS) : Android 4.0.X
Stock Speed 1.2Ghz UV 0%
OC 1.5Ghz/Slightly UV 2%
OC 1.5Ghz/Middle UV 5%
OC 1.5Ghz/Extremely UV 8%
These Kernels are made by tbalden. There to only be used with ICS Roms. There are both OC, and UV Kernels.
http://forum.xda-developers.com/showthread.php?t=1505394
[ROM][Feb 19 2012] Pyr'o'Ice ICS Desensed 1.1.0 - Android 4.0.3, AOSPish, 1.5GHz OC
The Kernels are the 3rd post down, and updated when need be.
Gingerbread (GB) : Android 2.3.X
Note: Anybody using any newer Radios, or HBoots. Any kernel that isn't Stock might cause issues. Most GB Kernels where made for the Stock Hboot, and Radio.
How to flash these: Reboot into Recovery. Wipe Cache, Dalvik Cache, and Mount System. Then Flash Kernel. Wait 10 Minutes (For best results) Then do a regular reboot.
Stock Kernel
This is the Kernel that comes on the Stock Rom. No OC, no added parts. Just how HTC sent it. Use this if you want a super stable Kernel. Or flash a bad Kernel, and can't boot.
Thanks to Undead for making this flashable Zip. (Enjoy your GSII Undead)
http://www.4shared.com/file/ect_yUtz/Stock_Kernel_Undeadk9.html
Romanbb's Kanged Kernel v.0.1
OC to 1.512 GHz
[*]UV across the board
[*]Upgraded to .14 from .10
[*]compiled with Snapdragon optimizations
Theres two of these Kernels. They're both very unstable, and cause a lot of random reboots. They're for use for any Rom based of the Stock Rom.
http://forum.xda-developers.com/showthread.php?p=18611364
Stock Kernel with CIFS.ko, Tun.ko, NLS_UTF8.ko.
By Nusferatu
Just a stock kernel with CIFS.ko , TUN.ko , NLS_UTF8.ko built in
Works fine for me except for 1 bug (it's related to cifs i suppose) :
- on samba server rights for folder\files must be 777 or cifs won't allow to execute\view any.
http://forum.xda-developers.com/showthread.php?p=19721393
Unity Kernel va1 for Doubleshot.
By the Unity Team
- 2.6.35.14
- 2WCR ( 2-Way Call Records)
- NOOP I/O Sheduler
- SLQB
- OC 1782Mhz (1.8Ghz)
Default Speed 1512Mhz (1.5Ghz)
-JHash3
-Flash disabled @ 10% Battery & 5 Degrees Temp.
-Lower Wi-Fi Voltage
-Wi-Fi PM_Fast in Standby
-Tweaked Governors
-VDD SySFS Interface
-Fixed Scaling Cor_Freq
-GPU OC up to 320Mhz
-X2 Kernel Compression
-Cifs/Tun/UTF8
This is the only Kernel made by a Dev Team.
Heres the Website http://www.virtuousrom.com/
This Kernel is "Stable" any clock speeds above 1080Mhz causes issues, reboots, etc. But IMO this is the best Kernel for any GB Rom. This can be used with MIUI, any Sense 3.0, and Stock Based Rom.
The Download Link for this Rom is Broken, so I'll upload it later tonight.
I'll Upload any Kernel, to any File share site on Request.
Sent from my HTC myTouch_4G_Slide using Tapatalk
--------------
Sent from my HTC myTouch_4G_Slide using Tapatalk
sticky pls
sticky pls
Correction - the maximum processor clock speed as recommended by the manufacturer is 1.5 - HTC nerfed it down to 1.2, so saying it's a 1.2 processor is not accurate.
The GPU is the Adreno 220.
I'll toss more tech specs in later.
Blue6IX said:
Correction - the maximum processor clock speed as recommended by the manufacturer is 1.5 - HTC nerfed it down to 1.2, so saying it's a 1.2 processor is not accurate.
The GPU is the Adreno 220.
I'll toss more tech specs in later.
Click to expand...
Click to collapse
I was using what HTC Said, but I updated it.
Hey could you upload the Virtuous Kernel plz
Can anyone tell me which one works best for the miui port? I'm on the one that comes with the rom but I heard v1a might be better and is it oc/uv
Thank's aren't asked for but appreciated
we have some new kernels over in the dev. section so far we know they work for stock 1.28.531.9, 1.28.531.10, and Bulletproof.
yogi2010 said:
we have some new kernels over in the dev. section so far we know they work for stock 1.28.531.9, 1.28.531.10, and Bulletproof.
Click to expand...
Click to collapse
I'll update .
Sent from my HTC myTouch_4G_Slide using Tapatalk
erikmm said:
Can anyone tell me which one works best for the miui port? I'm on the one that comes with the rom but I heard v1a might be better and is it oc/uv
Thank's aren't asked for but appreciated
Click to expand...
Click to collapse
Unity va1, and it'll help with things. OC to 1.7Ghz. Lower Wifi Voltage, and Flash at 5%. I'll upload the Kernel if need be.
Sent from my HTC myTouch_4G_Slide using Tapatalk
can you upload it please, im assuming this should work on my rooted deox stock with a few bloat removed.
ac3theone said:
can you upload it please, im assuming this should work on my rooted deox stock with a few bloat removed.
Click to expand...
Click to collapse
When I get home I'll upload. But blue has a 1.7Ghz OC Kernel. Now.
It's Always Sunny in XDA
AgentCherryColla said:
When I get home I'll upload. But blue has a 1.7Ghz OC Kernel. Now.
It's Always Sunny in XDA
Click to expand...
Click to collapse
I know but im not all that interested in Oc, more interested in battery savings. Also I use wifi alot so the unity kernel seems best to me.
Sent from my myTouch_4G_Slide using Tapatalk
I forgot to ask if any of these kernels support the latest software version 1.55 with hboot 1.45. And does the unity kernel support these version's?
Sent from my myTouch_4G_Slide using Tapatalk
ac3theone said:
I forgot to ask if any of these kernels support the latest software version 1.55 with hboot 1.45. And does the unity kernel support these version's?
Sent from my myTouch_4G_Slide using Tapatalk
Click to expand...
Click to collapse
Unity might work, can't say. All other kernels won't.
It's Always Sunny in XDA
i still cant find the link for Unity Kernel va1

[Q] MIui v4 for galaxy 3

MIUI V4 screemshots for galaxy 3 show cpu 1.2 ghz . The cpu of my galaxy3 is 600 mhz. Is it overclocked or what? Please someone tell me!
Please tell me fast I want to flash this ASAP!
t4nchan said:
MIUI V4 screemshots for galaxy 3 show cpu 1.2 ghz . The cpu of my galaxy3 is 600 mhz. Is it overclocked or what? Please someone tell me!
Click to expand...
Click to collapse
please tell me ASAP... The ROM is ****ingly aweosome!
PATIENCE!
Our phone runs at 667MHz and the kernel in MIUI V4 runs at 1.2 GHz because it is overclocked kernel. If you don't want to mess up your phone by overclocking, flash this rom anyways, but then flash NON-OC kernel. I think G3MOD 2.5 NON-OC should work with it.
If you don't want to overclock your phone, you will notice some (big) lag probably with MIUI.
Kk......
twinky444 said:
PATIENCE!
Our phone runs at 667MHz and the kernel in MIUI V4 runs at 1.2 GHz because it is overclocked kernel. If you don't want to mess up your phone by overclocking, flash this rom anyways, but then flash NON-OC kernel. I think G3MOD 2.5 NON-OC should work with it.
If you don't want to overclock your phone, you will notice some (big) lag probably with MIUI.
Click to expand...
Click to collapse
thanx ..and I don't know if you are dude or girl but can you suggest me a nice ROM where all features work. Like in most ROMs bluetooth and mobile data doesn't work!
got rid of stock one!:crying:
t4nchan said:
thanx ..and I don't know if you are dude or girl but can you suggest me a nice ROM where all features work. Like in most ROMs bluetooth and mobile data doesn't work!
got rid of stock one!:crying:
Click to expand...
Click to collapse
Try purumod or indroid v6 (download link for this is in the general section)
Sent from my GT-I5800 using xda app-developers app

Categories

Resources