Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
My phone is dying prematurely, with my camera crapped out and my usb port not fully functional. My phone can charge but it can't be recognized by a computer anymore.
I'm sending it in for a replacement, but I realized now that I can't flash back to Froyo easily. I'm stuck in CM7, and factory reset brings me back to a fresh CM7. I don't want Motorola to use the fact that I used CM7 as an excuse to charge me $300.
Can someone help me please?
you can try restore froyo nandroid backup via custom recovery...
I'll have to remenber tha latest SBF that you flashed on your devide, have a friend with a Defy, flash it on that Defy, give him your SD card to put a full nandroid backup on it ...
basically you need to restore a nandroid backup of froyo of your region since you cannot flash the full sbf. There are already nandroid backups available in xda.
If you have wifi use a simple app called Ftpdroid to copy it to your memory card and restore.
If you do not have wifi then try coping the file using a card reader and restore.
Sent from my MB525 using Tapatalk
I have on my defy cm7 but don't work autofocus and i would to try the rom of defy + . I have to flash froyo ?
inst.
Zinshin said:
My phone is dying prematurely, with my camera crapped out and my usb port not fully functional. My phone can charge but it can't be recognized by a computer anymore.
I'm sending it in for a replacement, but I realized now that I can't flash back to Froyo easily. I'm stuck in CM7, and factory reset brings me back to a fresh CM7. I don't want Motorola to use the fact that I used CM7 as an excuse to charge me $300.
Can someone help me please?
Click to expand...
Click to collapse
FOLLOW THESE STEPS ::
>POWER OFF, PRESS AND HOLD POWER ON + VOL DOWN Till you get recovery mode , erase all data and wipe cache.
>reboot and keep on holding volume up key to get your phone in bootloader mode.
>connect your phone with your PC, open RSD LITE 4.9 , select your full sbf flash file and flash your phone.
NB::install all the drivers from Motorola driver installer or MOTOROLA PHONE TOOLS onto your pc before flashing. CHECK OUT http://forum.xda-developers.com/showthread.php?t=853674 or you can download and install these http://goo.gl/PrA6C
AND you can find the full froyo sbf for your region from the list http://forum.xda-developers.com/showthread.php?t=966537
rachit2588 said:
FOLLOW THESE STEPS ::
>POWER OFF, PRESS AND HOLD POWER ON + VOL DOWN Till you get recovery mode , erase all data and wipe cache.
>reboot and keep on holding volume up key to get your phone in bootloader mode.
>connect your phone with your PC, open RSD LITE 4.9 , select your full sbf flash file and flash your phone.
NB::install all the drivers from Motorola driver installer or MOTOROLA PHONE TOOLS onto your pc before flashing. CHECK OUT http://forum.xda-developers.com/showthread.php?t=853674 or you can download and install these http://goo.gl/PrA6C
AND you can find the full froyo sbf for your region from the list http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
My computer does not recognize my phone when it's in Bootloader mode.
I installed the Nordic Rom to use CM7. So I need a nandroid backup. Does anyone know where I can get one?
Whenever I try to connect my phone to USB...
It says there's an error with the device. Windows 7 reports an unknown device, and error 47. That's why I believe there is something wrong with my usb port.
Progress:
I can't load into CM7 anymore, nor the stock rom. I can access the CM7 boot menu however, and go into Clockwork.
I tried a Motorola factory reset, and I tried changing the boot sequence (stock, 2nd-init, 2nd-boot) but no luck.
I'm a little stuck here guys
Have you installed USB drivers? Check all in beginners guide.
Sent from my MB525
You talk about your Defy not being recognized as USB disk?
Did you disable USB Debugging? So the USB Mass Storage option can be enabled after.
The data function in my usb port isn't working, my phone cannot be recognized at all. Even with three different cables and drivers installed.
Any ideas?
Is there a way to repair the port?
Could it have water damage? If it could, let the cap open and let it rest for a couple if days. Open it up and check for visible signs of damage/corrosion. Would not do this if you are trying to claim warranty.
To restore, go to the sbf threat, there are links to the individual threats of each. Normally, you can find there the nand. Place it in the right folder and restore it with cwm. Remove the battery and go to stock recovery. Wipe cache and data. Try to remember what sbf you were on, but don't think it matters much... Don't guaranty it will work. You could try to find someone who wants to try it as they can always flash a sbf if it doesn't work.
Sent from my MB525
i can help u with a nand of any sbf u want...just send me a pm or post here and in 1 hour i will upload it
just be sure u say the correct one, coz any boot cm7 version changes ur kernel, and the nand wont work
LE: after u restore the nand, just use the moto recovery, wipe data/cache so ur phone is back to stock, no root no custom recovery and u can take it to warranty
LLE: i guess i need to make a nand of the tmobile us version also so u can return it to the shop
Hmmm
Hmm but I flashed a nordic sbf. :/
I don't mind restoring nordic though, as long as there's no sign of cyanogen mod. I can replace the bootlogo and animation there.
I have used Cyan 7 for months with none of the problems you are describing. I also dont use any base and wonder why people are so pushy on using a base.
I go into recovery, Wipe all, Then install cyan then gapps.
It sounds to me you did or didnt do something during install.
Download the newest cyan 7 rom
Get into the stable recovery and wipe everything, even dalvik under advanced
Flash cyan
Flash gapps
reboot.
I promise it will work
Base doesn't matter, it gets replaced by stable releases. I think he tries to restore it to claim warrant.
Sent from my MB525
I think you may have overreacted and made things worse. Sometimes my data function stops working in CM7 - it fixes itself after a warm reboot or two.
I have spent the past 3 hours scouring over these forums before doing a post and I could find lots of great information if I could just get past the perpetual loop and access either the Recovery or Download Modes of my phone.
It is a Telus Samsung Galaxy Fascinate [SGH-T989D] and I have been tinkering with it for that past 24 hours to get it rooted and play with some of the ROMs out there.
I have gotten past the 3e Recovery Issues, resolved a Soft Brick and tested out 3 ROMs but now I am completely stuck and I think it is entirely my own fault but now I need some assistance in getting out of it.
This morning I threw on ICS_NBv9.2 and as it warned it went into a bit of a panic mode and has hit a perpetual Boot Loop. Now every post I have read says go into Download Mode and Odin back to Stock...I can't...it comes up with the Battery Image twice and then starts the boot up cycle all over again. The other option is to Flash the ROM again...problem is it continuously cycles through the Boot and never goes anywhere.
I have tried multiple Cables, reinstalled the USB Drivers, tried on 4 different Computers (2 Linux and 2 Windows) and well lets just say I am at the end of my rope.
Is there any known way to stop this kernel panic and let me get back to stock and put a functional ROM on the phone.
Thanks in Advance.
I may be able to help you...
Here are some solutions I can think of from the top of my head.
Try to see if your phone will connect to samsung kies on your computer via USB, there should be a way to restore it from there.
If you can't do this, then the next step would be to try and enter CWM Recovery mode (you should have this installed already, just look online how to enter into recovery mode). Next, mount your phone using recovery and put a stable rom (.zip) onto your phone. Factory reset, and wipe your phone, then flash the rom.
If you can't enter CWM Recovery, then the next step I can think of is to find a stable rom and flash it through ODIN.
If this isn't working either, then you just made yourself a very stylish paper weight! congrats.
There may stil be hope that if you call your carrier and tell them a sob story like, "my phone restarted on it's own and now it won't work properly." - and answer no if they ask you if you flashed, or downloaded 3rd party apps - then they might send you a free replacement.
Next time you want to flash your phone, remember... MAKE A BACKUP (nandroid) FIRST. That way if anything goes wrong, you can just restore it back the way it was.
Here is a site that may help you as well for rooting and making a backup for the t-989D (samsung galaxy s2 x - telus):
http://androidforums.com/galaxy-s2-...d-ultimate-root-optimization-guide-steps.html
Good luck,
J
Try This..
Remove Data Cable from Phone
Remove battery and re insert after 3-5 secs
now try to enter Downloading mode..
then insert data cable. and flash stock FW.
it should work..
The Paper Weight Theory
Thanks Input_Method and ranjan.
Unfortunately the reboot takes effect and cycles through before Kies, ODIN or anything else can take hold of the device.
I have tried the cable trick, Recovery Mode is a no go and it would appear to be an issue with CWM mismatch which is causing the reboot.
Hoping that a local "phone hacker" can help me out with a JTAG reboot this weekend but I am not overly optimistic.
Thanks again.
I recently picked up a Pantech Burst phone from At&t, and upgraded to ICS. I then proceeded to root the phone using the prestoroot.img method and it worked. Everything was running dandy until I got the VM Heap tool app and(stupidly) set the vm heap to 52m and attempted to reboot... It failed and all I got was a loop of boot up animations. I tried several times to reboot, and then tried to boot to recovery mode and factory reset. That worked, but it STILL didnt reboot..! I dont have a backup, and whenever i try to " Install update from external storage", it just fails over and over again. I found thestock firmware and downloaded it to my external sd card and install(still to no success). Im only 13 and cant afford a new phone! PLEASE SOMEONE HEEEELLLLPPPPPP!!!!!!!!!!!!!
Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.
I love you!!!!!!!
dvinelord said:
use p9070_download_tool_v3.3.zip and flash presto_bin_juus09032012_tp20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread pantech burst essentials.
Click to expand...
Click to collapse
it workkeed!!!!!:d
DvineLord said:
Use P9070_Download_Tool_v3.3.zip and flash PRESTO_BIN_JUUS09032012_TP20_user using this method http://forum.xda-developers.com/showthread.php?p=28602800#post28602800. You might find other answers in that same thread Pantech Burst Essentials.
Click to expand...
Click to collapse
I bricked my phone few days back doing restore from CWM 6 downloeded online from ROM manager,
I wiped cache dalvik etc & rebooted, I could see the Tap the android screen then suddenly blank now it wont start
I get QHSUSB_dload in PC device manager any way out
I tried this method but I dont get the download button to click it remains greyed out.
Is there any driver for QHSUSB_dload?
Or do I have no hope at the moment or in near future?
just don`t use ROM manager for installing recovery . usually the result is bricked phone
Yah, i remember a fastboot brick i got from rom manager (LG Optimud ME)
Sent from a 2.8 inch screen
I also just bricked my Pantech Burst the same way...using ROM Manager. Is there a way to fix this or am I out of luck? I did try the method posted at the top of this thread. It just gets locked in the S/W Upgrading screen. Any help will be greatly appreciated.
I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:
coolamjadkhan said:
I'm too in same situation.....i tried it updating via Pantech OS Upgrade tool......it updates successfully but doesnot bootup....
and now it shows some S/W Upgrading with red colour background
plz help me out:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.
Maybe solved!
tajlund said:
Mine did not upgrade successfully, but I have the exact same problem. On day three of waiting for a callback from Pantech on the issue. They are supposedly talking to the techs in Korea about it.
Click to expand...
Click to collapse
Don't know if this is going to help, but I had the problem (as I described) red S/W Upgrading and couldn't do anything. Well, after about two weeks of sitting with the battery out, I decided to redownload and rerun the Pantech update app, and lo and behold, it fixed my phone. It also installed a more up to date version of Android 4.0, I went from 4.01 to 4.04.
This is after running the updater a good 30 or so times the past two weeks hoping for anything to work, now today, bam, it works fine.
I would recommend anyone in this situation give the most recent updater a try, it may solve your problem.
need help with my burst!!!!!
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?
:crying: Bricked my phone total unable start. any hardware diagnostic tool or manual reset button.
please help urgently
needhelppantech said:
Hey! i have a pantech burst and i love it! but i had to reset it and now it wont work. my exhusband root it a few months ago....and he deleted the keyboard and the launcher..... so.... when i turn it on i cant do anything cause i cant write .... and if i skip the android start menu i cant see anything cause i dont have a launcher.... please someone help! what can i do?
Click to expand...
Click to collapse
would you like to sell it cheaper rate???
Bricked Pantech Burst Stuck in S/W Downloading Mode and completely wiped ...
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...
UPDATE - progress ???
dsull1981 said:
Ok I am having a similar issue guys. Last night I had to wipe my phone because it was overly full and I switched providers and the phone had become unusable. I tried using clockworkmod to do this and it wiped everything ( including clockworkmod. ) Now I only get a S/W Upgrading screen with a red box. I tried using the pantech download tool and the PANTECH_PRESTO_BIN_JUUS03122012.pdl file. It did appear that it was installing it but then it became stuck at the very very very end of things. I basically had to take the battery out to do anything at all as I had left the phone on all night to download the pdl file but without any luck.
When I reboot the phone it had the S/W Upgrading mode with the red screen. I've tried all of the different key combinations on the pantech burst etc volume up + volume down and power, volume down + power, volume up + power. None of these things will reboot the phone.
I am hoping I can use the pantech download tool to install a different pdl instead and possibly get it working that way. I know that when the phone is off if I plug it into usb then the screen lights up on it with the S/W Upgrading screen and the red box. If I press the power button or any other combinations of buttons + the power button it also does this. It literally will not do anything else.
I cannot use pantech pc suite because the phone originally was so unusable I could not put the android apk file on the phone even though I have it on my laptop.
I tried using adb and fastboot and it will not even find my device through ANY usb port on the laptop. I've tried deleting and reinstalling the drivers over and over. The only thing I know to do is reboot afterward and hopefully it will find my phone on usb with adb. If I can just get to a bootloader or flash functional firmware onto this phone I think I could get it working but I do not know enough about the pantech burst to try physically jumping anything on it in order to hard reset it.
So my only options right now look like maybe get a different pdl, possibly reboot and the drivers may find my phone, or JTAG this thing.
I can't put it in usb debugging mode because it won't boot. Since adb does not even find the device as being attached it seems as if this phone should be operating in a different port mode or something to make it visible. I could be wrong but I am hoping that rebooting fixes the driver issue and makes the phone visible.
I tried PDAnet also and once again it does not work because it cannot find the device. This could be a usb cable issue I suppose but I only have this particular cable I am pretty sure
I might try another cable as well...
Any other ideas ? Am I going to have to JTAG this thing or should it be fixable using the download tool and a different pdl ? Or do I need to find another way to completely wipe the phone first and THEN use the download tool with the pdl file ?
It does get a bit confusing with so many mods, roms, and methods to recover android phones. If I can get the phone to boot then I can reload my backups and all should be well. I do need this phone for business purposes also. Any ideas guys ?
PS> I am also pretty decent with linux distros like arch or ubuntu so I would like to also know if it would just be better to do this in linux and possibly use linux to manually switch the phone to a different device mode to make it visible in the instance of there being nothing wrong with the drivers.
Thanks for any ideas or suggestions ...
Click to expand...
Click to collapse
--------------------------------------------------------------------------
OK quick update, I found the pantech burst upgrade tool and the burst-hack.cmd script
I managed to successfully find my phone with the upgrade tool and it completely ran its course and I am guessing it installed Ice Cream Sandwich.
My new problem is that the phone goes to the pantech logo boot screen if I plug the phone into usb but that is all it will do. If I unplug the phone and try to get into S/W Upgrade mode again or power it on it will not do anything at all. Basically the display only comes on when plugged in at this point so I am wondering if the battery is even charged or if it will charge. I read somewhere ( in the gizmolord forum ) that a guy had the same issue as me and he ran this tool for his pantech burst and then left the battery out for 2 weeks and tried to power it back on and it worked for him.
Is it possible that I just need to power the device down completely and let it completely discharge before it will reboot or is this thing bricked ?
I am thinking that either the battery needs to charge, or the phone needs to discharge and power down completely, or the phone could be bricked. I have a feeling it is not bricked because the update tool said everything was successful and no errors or anything.
I will try leaving the battery out for awhile and letting the phone discharge on its own and see what kind of results I get. I would think that 16 - 24 hours would be sufficient. Any ideas ?
---------------------------------------------------------------------------------------------------------------------
Ok so I did a bit more digging and research and found out that the culprit is most likely the poorly designed charging circuit in the pantech phones. I found a tech blog called Mikes Techblog where he shows how to solve this on a pantech jest phone with the same issue. The problem is that the battery is 3.7v and is currently reading 2.8v on the volt meter. The phone will not even attempt to charge until 3.7v is available on the battery because of how the charge circuit is designed. I am going to try the usb cable trick and usb adapter and see if I can monitor its progress with the voltmeter and get it back up to 3.7 volts. After this it should allow me to charge it normally and should boot just fine. It is showing the pantech logo which tells me that the firmware is there and isn't buzzing or doing anything else weird so more than likely this is related to the battery and not having enough of a charge when running the official upgrade tool. This problem probably had already existed prior running the update tool and is why the S/W Upgrading screen only would come up AFTER being plugged into a power source and would disappear immediately. If the battery had any charge whatsoever and if the phone could see it then I would see a screen that tells me to plug my phone in and charge it. I am thinking this is solved but will only know after I charge the battery. From what I've been reading in comments from others the battery issue is prevalent on many different pantech phones including the burst model. Other people with the pantech burst have said in comments on Mike's blog that this made their phone boot right up and said that this was EXACTLY the issue. Perhaps the best way to use these pantech phones is to never ever let them fully discharge the battery.
Hi everyone,
I'm hoping that someone can help me out with my device. I have a rooted sm-p900 that was working fine until a month ago when I tried to flash [ROM][7.1.x|SM-P900| Unofficial LineageOS 14.1 (v1awifi). I was busy multi-tasking and made the stupid mistake of flashing the rom before updating the BL. Since trying to do so, I have not been able to get past the first screen that says "Samsung sm-p900" . After the logo disappears, my screen remains lit but is just black.I could not restore my backup after either.
Where I am now:
- I can still access and use T.W.R.P. (latest 3.1.1) (If TWRP is left alone for too long, the device will reset to the same black screen and hang forever. If flashing a rom is taking long, the device will restart mid-flash as well.)
- I can still access download mode and use odin as well.
- I have since flashed the appropriate BL but that has not changed anything.
-I have tried clean flashing a magnitude of different roms and still come across the same problem.
I honestly have no idea how I can fix the device and have tried everything I know how. I would love to get it back as soon as possible. Any help is greatly appreciated, so thank you in advance!
jp2572 said:
Hi everyone,
I'm hoping that someone can help me out with my device. I have a rooted sm-p900 that was working fine until a month ago when I tried to flash [ROM][7.1.x|SM-P900| Unofficial LineageOS 14.1 (v1awifi). I was busy multi-tasking and made the stupid mistake of flashing the rom before updating the BL. Since trying to do so, I have not been able to get past the first screen that says "Samsung sm-p900" . After the logo disappears, my screen remains lit but is just black.I could not restore my backup after either.
Where I am now:
- I can still access and use T.W.R.P. (latest 3.1.1) (If TWRP is left alone for too long, the device will reset to the same black screen and hang forever. If flashing a rom is taking long, the device will restart mid-flash as well.)
- I can still access download mode and use odin as well.
- I have since flashed the appropriate BL but that has not changed anything.
-I have tried clean flashing a magnitude of different roms and still come across the same problem.
I honestly have no idea how I can fix the device and have tried everything I know how. I would love to get it back as soon as possible. Any help is greatly appreciated, so thank you in advance!
Click to expand...
Click to collapse
Have you tried taking it completely back to stock via Samsung Kies on your PC?
Sorry I don't have complete details, but it goes something like this (and if you search this site or Google, you'll find a good write-up on how to do a complete recovery using Kies):
1. If you can, make a backup using TWRP - if not, you are going to lose everything because of the next steps
2. Download and install the Kies software from the Samsung site and install it on your PC (I grabbed both versions, can install both on the same PC at the same time)
Make sure that it installs the Samsung USB driver
3. Connect to the tablet using the OEM cable - if you get a reaction from Kies, great
4. Somewhere in the Kies menu, you can tell it to do a complete recovery, including bootloader- if I remember correctly, you'll need your serial number (Sorry, been 18 months since I did just about the same thing and was able to recover it from my FUBAR, and I no longer run Windows so I can't step thru it)
It will go through downloading and flashing your tablet back to the state it was when you pulled it out of the box.
If you get to that point, you will have to go the whole route (including loading TWRP) to get it back to Lineage. It took me about two weeks to get it back to the way I had it before I was flashing and reading a book and talking to my wife all at the same time and didn't pay attention to what I touched on screen.
I apologize for the rambling and not having definitive statements, but I'm drugged up and been awake for the last 36 hours, and at my age that isn't a good combination.
Thank you so much for your help! I couldn't end up using that method because kies would not recognize my device for anything. It did get me inspired to try fixing it again however and it worked!
If anyone ever encounters the same or a similar problem, I just tried re-rooting it using odin and cf's autoroot file. It allowed me to be able to install roms again.
rhricik447 said:
Have you tried taking it completely back to stock via Samsung Kies on your PC?
Sorry I don't have complete details, but it goes something like this (and if you search this site or Google, you'll find a good write-up on how to do a complete recovery using Kies):
1. If you can, make a backup using TWRP - if not, you are going to lose everything because of the next steps
2. Download and install the Kies software from the Samsung site and install it on your PC (I grabbed both versions, can install both on the same PC at the same time)
Make sure that it installs the Samsung USB driver
3. Connect to the tablet using the OEM cable - if you get a reaction from Kies, great
4. Somewhere in the Kies menu, you can tell it to do a complete recovery, including bootloader- if I remember correctly, you'll need your serial number (Sorry, been 18 months since I did just about the same thing and was able to recover it from my FUBAR, and I no longer run Windows so I can't step thru it)
It will go through downloading and flashing your tablet back to the state it was when you pulled it out of the box.
If you get to that point, you will have to go the whole route (including loading TWRP) to get it back to Lineage. It took me about two weeks to get it back to the way I had it before I was flashing and reading a book and talking to my wife all at the same time and didn't pay attention to what I touched on screen.
I apologize for the rambling and not having definitive statements, but I'm drugged up and been awake for the last 36 hours, and at my age that isn't a good combination.
Click to expand...
Click to collapse
Try updating the bootloader again using odin
When this has happend factory reset
Flash the rom, addonsu and gapps in the same TWRP session
The rom should work then, I've been happily using it for about 6months now