Imposible to put s-on - HTC Sensation

Hi people....i am from Spain so place forgot my bad English...i will try to make me understand
I have two days trying to unblock the boot loader, put it in S-on, the revolutionary.exe do not start, only do a error
HTCSync is incompatible with this tool, Uninstall HTCSync and try again.
i have uninstall the HTCSync, i have try everything, charge mode, sync mode, this model is the new htc sensation Z710a , have since yesterday, i actualize the room via ota, and now the hboot is on 1.18.0000
In mode bootloader say this
*** LOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Aug 2 2011,22:35:52
please help me if someone know how
best regards from Barcelona

i would suggest you to try this procedure on another pc. maybe on yours you have a conflict or something..

What guide did you follow?
As far as I know the procedure is to uninstall sync, install the mentioned drivers from the guide, set usb debug on, fastboot off and there you go?
Tried all this?
O, btw, did you try to s-off or s-on the phone? Your boot is saying your phone is s-on now.

Que es exactamente lo que necesitas? S off o s on? Al parecer tu problema puede ser con htc sync, da mas de talles y tal vez te pueda ayudar
Sent from my HTC Sensation XE with Beats Audio using xda premium

I can resolve this problem, now i am s-on.
Mi problem was that htcsync is installed in computer, i has unistall in mobile but not has in vomputer, close htcsync in computer and revolucionary come go good.

jmgutier said:
I can resolve this problem, now i am s-on.
Mi problem was that htcsync is installed in computer, i has unistall in mobile but not has in vomputer, close htcsync in computer and revolucionary come go good.
Click to expand...
Click to collapse
I mean s-off not s-on , jeje
sorry my mistake

Related

Help to unlock...

Hello people! I´m Rodrigo from Brazil and my English is not very good.
I bought a HTC Touch Cruiser and I'm trying to unlock and am having difficulties.
First I downloaded the program PolarisUnlock. The first step worked ok but the second displays the error "error [226]: Flash Write and the process stops. The phone comes with 3 color screen, and you must run the first step of PolarisUnlock to have the phone working again.
Eu identifiquei no forum que é necessário executar o "Hard SPL 1.20", mas ao fazer o procedimento do link abaixo, nada acontece, o telefone apenas reinicia e volta tudo ao normal.
forum . xda - developers . com / showthread.php?t=330496&page=2
Can anyone help me?
Phone Information:
WM 6.1
ROM: 3.16.514.0 PTB
Data: 09/22/08
Radio: 25.111.40.09H
3 Color screen informations:
Pola100 MFG
SPL-2.20.OliMex
CPLD-2
It seems to me that link you posted is for the Trinity and not for the polaris.
Take a look at this: Polaris Unlocker SIM e Hard-SPL
Your polaris has hard spl installed,just try re flashing image or flash your new rom.
mmelo76 said:
It seems to me that link you posted is for the Trinity and not for the polaris.
Take a look at this: forum . xda - developers . com / showthread. php ? t=375338 Polaris Unlocker SIM e Hard-SPL[/url]
Click to expand...
Click to collapse
Hi mmelo,
I followed the tip and at the last step the software displays a message that the phone is already unlocked, but on the phone display the following message appears:
"You don't appear to have flashed the radio, did something go wrong with step 2?"...
This question has no choice, only X to close the message window.
You know what can this happening?
Regards,
Rodrigo
meknb said:
Your polaris has hard spl installed,just try re flashing image or flash your new rom.
Click to expand...
Click to collapse
Hi Meknb,
I perform installation of the ROM again but did not work.
Você conhece alguma ROM para me indicar?
Regards,
Rodrigo
this forum is awesome!
i´ve found that the radio Polaris_Radio_ROM_1.59.46.12 is compatible for downgrade!
After downgraded to this radio the step 2 and 3 of unlocker worked fine!
Now the cellphone is unlocked!!!
lezado said:
Hi mmelo,
I followed the tip and at the last step the software displays a message that the phone is already unlocked, but on the phone display the following message appears:
"You don't appear to have flashed the radio, did something go wrong with step 2?"...
This question has no choice, only X to close the message window.
You know what can this happening?
Regards,
Rodrigo
Click to expand...
Click to collapse
you've followed this tip?
meknb said:
Your polaris has hard spl installed,just try re flashing image or flash your new rom.
Click to expand...
Click to collapse

[Can We] Cid comands on Terminal Emulator

I can se my cid via TE with the : getprop ro.cid comand but can we change it via TE ?
Thx
Sent from my HTC One S using Tapatalk 2
scufutz said:
I can se my cid via TE with the : getprop ro.cid comand but can we change it via TE ?
Thx
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Cant see why not, anything you do in adb shell might as well be done on your phone. Might be easier to do the hexedit part on a computer though. And not sure if you need to unlock the bootloader again after changing CID, if so you'll need a computer for that.
I was thinking tonight to run the las ruu eu , and then unlock bootloader root it and put the trwp
Becouse i have some problems with wifi and also sometimes the 3g , the notifications apears when i turn on the screen but my hos having internet
I am on cid 11111 but was reading that there is another cid htc... Which recievied ota
Sent from my HTC One S using Tapatalk 2
scufutz said:
I was thinking tonight to run the las ruu eu , and then unlock bootloader root it and put the trwp
Becouse i have some problems with wifi and also sometimes the 3g , the notifications apears when i turn on the screen but my hos having internet
I am on cid 11111 but was reading that there is another cid htc... Which recievied ota
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Isn't the super-cid supposed to be 11111111 (8 1's)?
Your right i have de 8×1 cid
Sent from my HTC One S using Tapatalk 2
scufutz said:
I can se my cid via TE with the : getprop ro.cid comand but can we change it via TE ?
Thx
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
You can, that how I did it but still need a pc for hex bit.

[Q] How to root inspire 4G with Android 2.3.5

Hi. I recently updated my HTC inspire 4G from gingerbread 2.3.3 to 2.3.5. Is there any way to root it without having to downgrade? Any help would be greatly apreciated.
I think you could unlock the bootloader with HTCDEV, but even if you can I don't recommend it. AAHK just gives you a lot more options (with S-OFF and uprooting capabilities) and more control over your phone (more ROM choice).
bananagranola said:
I think you could unlock the bootloader with HTCDEV, but even if you can I don't recommend it. AAHK just gives you a lot more options (with S-OFF and uprooting capabilities) and more control over your phone (more ROM choice).
Click to expand...
Click to collapse
thanks for your response. Why do you not recomened using HTCDEV? From what I've read and seen. the Ace AAHK requires that my phone be donwgraded and I don't want to go through that process. I'm trying to find a way to do root without donwgrading. Any suggestions? Is there and updated virson of AAHK that will do it?
Shad_Lewis said:
thanks for your response. Why do you not recomened using HTCDEV? From what I've read and seen. the Ace AAHK requires that my phone be donwgraded and I don't want to go through that process. I'm trying to find a way to do root without donwgrading. Any suggestions? Is there and updated virson of AAHK that will do it?
Click to expand...
Click to collapse
Sometimes the best method requires a little more work. If you want to cut corners, I wish you luck. Otherwise bite the bullet and do it the right way.
Shad_Lewis said:
thanks for your response. Why do you not recomened using HTCDEV? From what I've read and seen. the Ace AAHK requires that my phone be donwgraded and I don't want to go through that process. I'm trying to find a way to do root without donwgrading. Any suggestions? Is there and updated virson of AAHK that will do it?
Click to expand...
Click to collapse
HTCDEV unlock is detectable by HTC, even if you relock it later; AAHK can unroot without leaving a trace. Also, HTCDEV only allows you to use ROMs intended for your phone, so you can't use ported ROMs; AAHK lets you flash ported ROMs. HTCDEV requires you to flash the boot.img separately each time you flash a ROM; AAHK does not.
The method with downgrade IS the updated version. There is no version that lets you root 2.3.5 without downgrading.
Will add the disclaimer that the 3.20.502 build(2.3.5 for inspire) does require it to be HTC dev unlocked first,then a file is flashed then relocked. In order for the aahk to do its thing. HTC plugged up an exploit so this slightly more combersome method is needed.
Either way the aahk is the way to go
No puedo hacer Downgrade
Alguien me ayuda a hacer downgrade a mi htc inspire 4g, no le funciona el wifi. tiene la version 2.3.5 y sense 3.0
thony84 said:
Alguien me ayuda a hacer downgrade a mi htc inspire 4g, no le funciona el wifi. tiene la version 2.3.5 y sense 3.0
Click to expand...
Click to collapse
You may be able to follow the information on http://forum.xda-developers.com/showthread.php?t=2169518 about downgrading, but probably unlikely since it is such an old device

[Q] i have a problem

hello all j have a problem with the installation of the rom http://forum.xda-developers.com/showthread.php?t=2065357
when I do the error handling ca says you have 45 maincid custom solution i try 7 times and always the same
thank you for your answer
Nobody help me
Envoyé depuis mon HTC One S avec Tapatalk
Up
Envoyé depuis mon HTC One S avec Tapatalk
Change your cid. Try with another one like ht__001
jac10000 said:
Change your cid. Try with another one like ht__001
Click to expand...
Click to collapse
already done and still the same error
if I put the cid ca 11111 may brick my phone or not
nicobrax said:
if I put the cid ca 11111 may brick my phone or not
Click to expand...
Click to collapse
Afaik the bricked phones ran the OTA update with super cid. They didn't flash any JB custom rom, which is what you want to do and which is sth different.
I personally ran the JB OTA twice and also having 11111111 (eight digits!) nothing got bricked.
Before doing anything check your present CID and your bootloader version. Seems that you're french so you already might have a 'good' cid. And please post the results here, so we can read them.
---edit---
oops, I forgot: Your bootloader is unlocked and you already have a custom recovery installed?
my phone was a vodap203 cid cid day I put the htc__203 and he never wanted to install a ruu naked so I installed a rom j then setting the custom super cid j've manages to flash the ruu 2.31 ​​but when I start putting a day he does not want to install it tells me what day I like this change and therefore j I try this solution but without success so c's why I'm asking you to supercid

Change CID / MID [S-ON]

Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000
Did you install the software version (android One)?
Did you install the software version (android One)? Usually the Telcel MID is the same as the unlocked and developer version, that's why only the CID is changed and you can install that
Mod edit - translated by https://www.deepl.com/translator:
Good night, my friend. The truth is that I just bought a HTC U11 Life and is very nice, but it has Android 7.1.1 operator of course Peru, and I would like to install a stock ROM or Android one (more I lean towards the second option) I would appreciate very much if you know how to guide the steps to follow, was attentive to your communication, my WhatsApp number is +51 980 511 815
**************************
Amigo buenas noches,. La verdad que recién compré un HTC U11 Life y es muy bonito, pero tiene Android 7.1.1 de operador claro Perú, y me gustaría instalarle una ROM stock o en su defecto Android one (más me inclino por la segunda opción) te agradecería enormemente me sepas orientar de los pasos a seguir, quedó atento a tu comunicación, mi número de WhatsApp es +51 980 511 815
DGabe said:
Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000
Click to expand...
Click to collapse
How do you flash it? by fastboot or recovery?
DGabe said:
Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000
Click to expand...
Click to collapse
I tried it and i got permision denied
dd: /dev/block/mmcblk0p1: Permission denied
Guy's there is a much easier way to do it. Simply flash that zip. Ready to work on mid="2Q3F20000" with S-ON. Cheers
If i remember correctly
neygus_59 said:
dd: /dev/block/mmcblk0p1: Permission denied
Click to expand...
Click to collapse
Mmcblk0p1 is strictly for usb_otg devices, so i assume there is something wrong with that method
Mmcblk1p1 - external_sd
Mmcblk0p1 - otg
Mmcblk0p47 - carrier partition
Mmcblk0p(**) - rest of partitions
** = any other nr of partition

Categories

Resources