[Q] CWM not mounting USB (red) and EXT4 - Samsung Infuse 4G

Hello so, my first question is , i have the RED CWM installed on my infuse and the roms run great. However im stumped why whenever i am in red recovery i am unable to mount the USB Storage and see both of my partitions in Windows. I have installed drivers already and its worked long time ago. No missing drivers appear in Device Manager either. So yes, anyone can guide me to fix USB mount in red recovery.
Second question is..
EXT4!
Ive read and read about how wonderful it is, just curious if theres something im supposed to do in order to make my partitions EXT4 so that my phone runs quicker? I havent found a way to figure this out yet and would be nice if i can be pointed in the right direction.
I have the internal memory and a 2 GB microSD card.

USB mounting never worked for me in CWM on the Infuse, I assumed it was broken (it's only ever worked for me on my Captivate using kernels that specifically mentioned it was fixed). I just use adb to push and pull files while in the recovery menu.
As for ext4, it depends on the ROM/kernel you are running. If you flash an AOSP/CM/MIUI ROM, the phone will be using ext4. If you flash a Samsung ROM and you're running an ext4-compatible kernel, you can check the status of your filesystem and convert between rfs and ext4 using the voodoo option in CWM (or, if the kernel supports it, the Voodoo Control app).

USB mass storage mode has never worked in any CWM implementation I've ever seen.
Use ADB push/pull

Related

Question Noobe

I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
jdubdieslo said:
I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
Click to expand...
Click to collapse
wipe sd: ext partition- deletes your apps on your ext partiton
wipe sd: davlik-cache wipes your cache on your sd
part sd: fat32+ext2+swap makes the three partitions you need to run hero roms
parted sd: fat32 only- just partitions your memory card for a fat32 for stock roms like cyanogen
convert ext2 to ext3- does exactly what it says. makes ext2 to ext3
repair ext filesystem- do this after you choose to convert ext2 to ext3
fix apk uid mismatches- does exactly what it says
fix rotate- fixes auto rotate issues some roms have
usb mass storage on- allows you to access your fat32 part of your sd from the recovery
usb mass storage off- turns off the mounting of your sd from the recovery
to flash it using the recovery flasher app, just look at the unlockr's video and substitute the recovery image name for the one that is in the video. Voila.
Hope this helps
Applause...
Getting a straight answer sometimes is the most difficult part of installing a rom.
thelastgoodbrother said:
Applause...
Getting a straight answer sometimes is the most difficult part of installing a rom.
Click to expand...
Click to collapse
lol thats very true but come on if you can't do the research to figure out the basic youll be posting another thread the next day but this time it'll be called "stuck on the g1 screen" lol sometimes not giving a straight answer may save their phone... but thats just my opinion
So use part sd: fat32+ext2+swap when useing hero rom... what if i use hero rom & go back to cyanogen can i leave it that way or do i need to parted sd: fat32 only? also if i did part sd: fat32+ext2+swap And then did part sdnly fat32 would it override the part sd: fat32+ext2+swap. another question i dont even know what ext 2 is so moving it to ext 3 would be? sorry guys im new at this.. just wanted to clarify this. is fat32 letting me store apps to sd? because i removed the sd card while phone was on & notices it froze; i put it back in removed & rrplaced battery and it was fine again.. also i noticed i part sd: fat32+ext2+swap again before i read your replies to see what it would do and everything on my sd card was goin..
also what is swap i saw an app that saved a swap file on sd..
thanks everyone for you help. loving the android community. as soon as i get some extra cash i will be donating to people that helped me make my android stand out from any one's android on my end of the computer. thanks
jdubdieslo said:
So use part sd: fat32+ext2+swap when useing hero rom... what if i use hero rom & go back to cyanogen can i leave it that way or do i need to parted sd: fat32 only? also if i did part sd: fat32+ext2+swap And then did part sdnly fat32 would it override the part sd: fat32+ext2+swap. another question i dont even know what ext 2 is so moving it to ext 3 would be? sorry guys im new at this.. just wanted to clarify this. is fat32 letting me store apps to sd? because i removed the sd card while phone was on & notices it froze; i put it back in removed & rrplaced battery and it was fine again.. also i noticed i part sd: fat32+ext2+swap again before i read your replies to see what it would do and everything on my sd card was goin..
also what is swap i saw an app that saved a swap file on sd..
thanks everyone for you help. loving the android community. as soon as i get some extra cash i will be donating to people that helped me make my android stand out from any one's android on my end of the computer. thanks
Click to expand...
Click to collapse
If you are running a hero rom and want to go to cyanogen, you can leave the fat32+ext2+swap. Just make sure that you wipe your sd partition and davlik cache using the options in the recovery image. Do this every time you are flashing any new rom for that matter, whether it's a different hero rom or a stock rom.
Ext is the partition of your memory card that stores all your apps. This was necessary for the g1 because it only had like 80 mb of memory for apps. The mytouch has nearly 300 so apps2sd is not really necessary, but most custom ROMs include this anyway. Ext3 is what most of these ROMs operate on. Ext2 is an old outdated version that no one really uses anymore and ext4 is even newer than ext3 but is not really necessary.
Fat32 only does not let you store your apps on your sd. It does not have the ext partition to let that happen. I don't know why your phone froze when you took your sd card out. It shouldn't have. When you part your memory card, whether its just fat32 or the combo fat, ext, and swap your memory card gets wiped and formatted to whatever you have, so of course you will lose all your contents on the memory card. It wipes and reformats all 3 partitons, or just the one if you are doing only the fat32.
As for swap, this is necessary for hero. Hero phones have 288 mb of ram and the mytouch only has 192mb so if you don't have this, the phone lags so bad and hangs up and you get constant load screens. The app you saw is known as swapper. Yes it does put a swap file on your sd card, but if you go into advanced settings, it lets you use your swap partition of your memory card, which is what you should always choose.
Keep them questions rolling, I like being able to contribute whenever I can.
tazz9690 said:
If you are running a hero rom and want to go to cyanogen, you can leave the fat32+ext2+swap. Just make sure that you wipe your sd partition and davlik cache using the options in the recovery image. Do this every time you are flashing any new rom for that matter, whether it's a different hero rom or a stock rom.
Ext is the partition of your memory card that stores all your apps. This was necessary for the g1 because it only had like 80 mb of memory for apps. The mytouch has nearly 300 so apps2sd is not really necessary, but most custom ROMs include this anyway. Ext3 is what most of these ROMs operate on. Ext2 is an old outdated version that no one really uses anymore and ext4 is even newer than ext3 but is not really necessary.
Fat32 only does not let you store your apps on your sd. It does not have the ext partition to let that happen. I don't know why your phone froze when you took your sd card out. It shouldn't have. When you part your memory card, whether its just fat32 or the combo fat, ext, and swap your memory card gets wiped and formatted to whatever you have, so of course you will lose all your contents on the memory card. It wipes and reformats all 3 partitons, or just the one if you are doing only the fat32.
As for swap, this is necessary for hero. Hero phones have 288 mb of ram and the mytouch only has 192mb so if you don't have this, the phone lags so bad and hangs up and you get constant load screens. The app you saw is known as swapper. Yes it does put a swap file on your sd card, but if you go into advanced settings, it lets you use your swap partition of your memory card, which is what you should always choose.
Keep them questions rolling, I like being able to contribute whenever I can.
Click to expand...
Click to collapse
ao since ext 2 is outdate we want to convert ext 2 to ext 3 then repair ext filesystemafter words.. so if you convert ext 2 to ext 3 is there only a ext 3 now or both ext 2 and it adds a ext 3? also what does dalvik mean? also i thought apps to sd was a big deal because if you switch roms all your apps are still there, but if you wipe ext partition then you lose the apps so the real reason is just for phone with low ram and cant store many apps at once.. intresting..and wats up with not wipe data/factory reset after installing roms? whats the reason behind that, i notice my IME keyboard is no longer there when i do that.. im trying to think of more questions lol. thanks a million.
jdubdieslo said:
ao since ext 2 is outdate we want to convert ext 2 to ext 3 then repair ext filesystemafter words.. so if you convert ext 2 to ext 3 is there only a ext 3 now or both ext 2 and it adds a ext 3? also what does dalvik mean? also i thought apps to sd was a big deal because if you switch roms all your apps are still there, but if you wipe ext partition then you lose the apps so the real reason is just for phone with low ram and cant store many apps at once.. intresting..and wats up with not wipe data/factory reset after installing roms? whats the reason behind that, i notice my IME keyboard is no longer there when i do that.. im trying to think of more questions lol. thanks a million.
Click to expand...
Click to collapse
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
yeah it is safest way to wipe and reformat the sd card before flashing a new rom.
tazz9690 said:
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
Click to expand...
Click to collapse
Previously I got a 2GB micro-sd card. so no problem for me to move my music, photos, videos and backup apps to my pc.
But i just bought a 8GB card 2 weeks ago and man, backup all before flashing a rom is pain in the a** . but can't help flashing this and that ROMs hee hee
so no choice. yesterday I flashed Eugene's supermagic rom. awesome!
cheers
tazz9690 said:
if you convert ext2 to ext3, there will only be ext3. It converts it from ext2, it does not make an additional partition. Davlik cache, if I am not mistaken is all your cache from your browser to google maps gets saved to your sd card as well instead of your phone memory. The apps2sd was originally for the fact that you keep your apps, but when flashing hero roms, it did not work for some reason and it resulted in boot loops. So that's why they say always format your ext if flashing from a different rom. For stock roms, I don't believe this would be an issue so you probably could go on without wiping your sd as long as you are moving from a stock rom to another stock. It will not work if you go from stock to hero, and vice versa. Wipe data/factory reset clears all the settings from your phone so you do not have any lingering settings stored on the phone from an old rom when you flash a different one. The only time that you do not need to do this is if you are flashing a newer version of the same rom. The IME is probably still there, it just got unchecked from the input method. Go to locale and text and recheck the "input" box and it should work again.
Click to expand...
Click to collapse
so when going to another rom should you part the sd before or after the rom is loaded? and honestly im running out of questions.. i got one that is throwing me off.. i have my phone in fastboot and in device manager it show andriod bootloader (cant remember the exact device); i type in the cmd
cd desktop
cd fastboot
then the code for the custom splash and i get
< waiting for device > and it just sits there. nothing will happen. & my splash is still stock.. the file is at the rights bytes and i have the folder on my cd on the desktop and the driver i beleive is installed correctly on the cp. what am i doing wrong?
I think the Title should be Changed, Something Like Recovery-101. Know Your Phone.
Alot of great Info for New comers
jdubdieslo said:
so when going to another rom should you part the sd before or after the rom is loaded? and honestly im running out of questions.. i got one that is throwing me off.. i have my phone in fastboot and in device manager it show andriod bootloader (cant remember the exact device); i type in the cmd
cd desktop
cd fastboot
then the code for the custom splash and i get
< waiting for device > and it just sits there. nothing will happen. & my splash is still stock.. the file is at the rights bytes and i have the folder on my cd on the desktop and the driver i beleive is installed correctly on the cp. what am i doing wrong?
Click to expand...
Click to collapse
Part the sd before you load the rom onto the phone. if it has apps2sd and you try to part your memory card after, you will get stuck at the splash more than likely because you are missing key components that are stored onto the sd, like all your apps for example that come with the ROM.
In fastboot, when it's plugged in, on the phone does it say "Fastboot USB"?
You might want to try to reupload the drivers for the fastboot. That may be why it's hanging. I never use fastboot through the desktop. I always use fastboot through the SDK folder on my C:\ drive. It always worked for me that way. For some reason I could never get it to work with the "cd destop" but thats just me.
tazz9690 said:
Part the sd before you load the rom onto the phone. if it has apps2sd and you try to part your memory card after, you will get stuck at the splash more than likely because you are missing key components that are stored onto the sd, like all your apps for example that come with the ROM.
In fastboot, when it's plugged in, on the phone does it say "Fastboot USB"?
You might want to try to reupload the drivers for the fastboot. That may be why it's hanging. I never use fastboot through the desktop. I always use fastboot through the SDK folder on my C:\ drive. It always worked for me that way. For some reason I could never get it to work with the "cd destop" but thats just me.
Click to expand...
Click to collapse
i figured taht was the right order part sd then load rom because i did it and it worked lol, and since it worked i never tried it rom the part sd. so do cyanogen roms have app2sd? and does the cyanogen rom have a overclocker built in now because i tried to use my overclock widget and it doesnt work and the phone seems as if its running faster even with out my widget..
and yes it says fastboot usb & ive tried uninstalling & reinstall the drivers mutliple times and still get < waiting for device > so if i do it on the c:/ drive were do i place the fastboot folder? /c:/fastboot? and what would the code be?
cd c:/
cd Fastboot
thent he other code that i have saved at home the flash_splash one? i cant remember it.
one really dumb question. i rooted my pops mytouch lol because he was complaining about the mytouch stock because of numerous things. so i rooted it to 4.2.2 and out of all things he is now complaining about the stock ringtones.. lol. anyone know where to get the stock ringtones? if not its cool i told him id make sum ringers with ringdroid for him like the temptations and willie nelson lol.. thanks all for your support.
jdubdieslo said:
i figured taht was the right order part sd then load rom because i did it and it worked lol, and since it worked i never tried it rom the part sd. so do cyanogen roms have app2sd? and does the cyanogen rom have a overclocker built in now because i tried to use my overclock widget and it doesnt work and the phone seems as if its running faster even with out my widget..
and yes it says fastboot usb & ive tried uninstalling & reinstall the drivers mutliple times and still get < waiting for device > so if i do it on the c:/ drive were do i place the fastboot folder? /c:/fastboot? and what would the code be?
cd c:/
cd Fastboot
thent he other code that i have saved at home the flash_splash one? i cant remember it.
one really dumb question. i rooted my pops mytouch lol because he was complaining about the mytouch stock because of numerous things. so i rooted it to 4.2.2 and out of all things he is now complaining about the stock ringtones.. lol. anyone know where to get the stock ringtones? if not its cool i told him id make sum ringers with ringdroid for him like the temptations and willie nelson lol.. thanks all for your support.
Click to expand...
Click to collapse
Cyanogen's rom has dynamic apps2sd. If it senses that you have a partition, it will do apps2sd. If you don't have an ext, it will save it to the phone, so it will work that way too.
For the fastboot, do you even have your computer set up for the use of ADB and fastboot? Like having the latest SDK downloaded and set up for your computer? That might be why it says, waiting for devices. When you do cd fastboot, afterward type fastboot devices and see if in the cmd it says "HTC Bootloader" or "Android Bootloader" I am not sure which one it is.
As for the ringtones, here is the link for the download in Cyanogen's 4.2.2 threat http://n0rp.chemlab.org/android/audio-resources.zip That downloads a zip of all the stock ringtones. Just upzip the file and place it on the root of your sd card.
tazz9690 said:
Cyanogen's rom has dynamic apps2sd. If it senses that you have a partition, it will do apps2sd. If you don't have an ext, it will save it to the phone, so it will work that way too.
For the fastboot, do you even have your computer set up for the use of ADB and fastboot? Like having the latest SDK downloaded and set up for your computer? That might be why it says, waiting for devices. When you do cd fastboot, afterward type fastboot devices and see if in the cmd it says "HTC Bootloader" or "Android Bootloader" I am not sure which one it is.
As for the ringtones, here is the link for the download in Cyanogen's 4.2.2 threat http://n0rp.chemlab.org/android/audio-resources.zip That downloads a zip of all the stock ringtones. Just upzip the file and place it on the root of your sd card.
Click to expand...
Click to collapse
thats good to know. so if you ext 2 will cm use ext 2 & if you converted it will it use ext 3? also how can i tell what i have ext 2 or ext 3 other than knowing if i click convert to ext 3? i downloaded the SDK and used the usb folder when the computer was looking for drivers & it says it installed drivers successfully; so now when im in fastboot usb on my phone the computer in device manager shows bootloader (cant remember exactly what it says untill i get home); & when my phone is in recovery the driver shows ADB (cant remember the exact name till i get home also); and then i do the codes because my fastboot & sdk folders are on my desktop; when i downloaded the sdk folder i dont think i did anything with it as far as isntalling it, what does the sdk folder do? lol. sorry..
thanks for the ringtones my pops says mucho gracias.
jdubdieslo said:
thats good to know. so if you ext 2 will cm use ext 2 & if you converted it will it use ext 3? also how can i tell what i have ext 2 or ext 3 other than knowing if i click convert to ext 3? i downloaded the SDK and used the usb folder when the computer was looking for drivers & it says it installed drivers successfully; so now when im in fastboot usb on my phone the computer in device manager shows bootloader (cant remember exactly what it says untill i get home); & when my phone is in recovery the driver shows ADB (cant remember the exact name till i get home also); and then i do the codes because my fastboot & sdk folders are on my desktop; when i downloaded the sdk folder i dont think i did anything with it as far as isntalling it, what does the sdk folder do? lol. sorry..
thanks for the ringtones my pops says mucho gracias.
Click to expand...
Click to collapse
I don't think any builds use ext2 anymore. They all either use ext3 or ext4. You have to make an ext2 first though, before you can convert it to ext3. Same goes for ext4, you have to have ext3 before you can upconvert to it. Just use ext3 just to be safe. If you go into "Parted" through the recovery image by typing in "parted /dev/block/mmcblk0" in adb shell, then typing 'print' it will show how big your fat32 is, it'll say which ext you have as well as your size, and the same for linux swap.
For a SDK, the folder stores the drivers needed for fastboot and adb in it. You should save it to the root of your C:\ drive because it makes things easier. I recommend you set up SDK using this thread guide: http://forum.xda-developers.com/showthread.php?t=532719
Setting up the Android 1.5r2 SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows-1.5_r2" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows-1.5_r2\tools
--------------------------------------------------------------------------
Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
--------------------------------------------------------------------------
Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows-1.5_r2\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
Those are basically what you need to look at.
jdubdieslo said:
I would like to know exactly what these do before i do them. sorry guys im a noobe..
Build:RA-magic-v1.2.3G
- wipe sd:ext partition
- Wipe SD:dalink-cache
- part sd:fat32+ext2+swap
- part sdnly fat32
- repair ext filesystem
- convert ext2 to ext3
- fix apk uid mismatches
- fix rotate
- USB Mass storage on
- USB Mass Storage off
Also how do you flash this recovery img from the Recover Flasher App, VS using CMD & fastboot.
Click to expand...
Click to collapse
Don't mean to hijack your thread OP, but I do have a question that I hope someone can answer. When partitioning the SD card, you choose the option I put in Bold. After that, could you use this link:
http://forum.xda-developers.com/showthread.php?t=535914
To adjust the different sizes of the 3 partitions? I know that in order to run any Hero ROMS, your SD card has to be partitioned with at least 3 (fat32+ext2+swap) parts. This is the only part that still confuses me when it comes to adequately rooting.
If you are using ubuntu, you create the partitions you want, as well as the size. If you use the recovery image, you would just be adding an unnecessary step because it will just get deleted when you make your partitions again with Ubuntu.
tazz9690 said:
I don't think any builds use ext2 anymore. They all either use ext3 or ext4. You have to make an ext2 first though, before you can convert it to ext3. Same goes for ext4, you have to have ext3 before you can upconvert to it. Just use ext3 just to be safe. If you go into "Parted" through the recovery image by typing in "parted /dev/block/mmcblk0" in adb shell, then typing 'print' it will show how big your fat32 is, it'll say which ext you have as well as your size, and the same for linux swap.
For a SDK, the folder stores the drivers needed for fastboot and adb in it. You should save it to the root of your C:\ drive because it makes things easier. I recommend you set up SDK using this thread guide: http://forum.xda-developers.com/showthread.php?t=532719
Those are basically what you need to look at.
Click to expand...
Click to collapse
So if u have a ext 3 how do u get ext 4? Also wat is linux swap? And yea i didnt do all that im sure thats why i was getting < waiting for device >. I will let u know the outcome of the splash screen... thanx.
jdubdieslo said:
So if u have a ext 3 how do u get ext 4? Also wat is linux swap? And yea i didnt do all that im sure thats why i was getting < waiting for device >. I will let u know the outcome of the splash screen... thanx.
Click to expand...
Click to collapse
If you want ext3, you have to go into parted like I stated in a previous post and create your partitions that way. From there, to upgrade to ext3, you type "upgrade_fs". You now have ext3. If you want ext 4, after that you would type
"tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
e2fsck -fpDC0 /dev/block/mmcblk0p2"
That's just too much work for me. I am fine with ext3. If you want a more in depth explanation, go to this thread: http://forum.xda-developers.com/showthread.php?t=534714&highlight=wipe+partition
Linux swap, I believe I explained in one of my early posts. The mytouch only has 192 mb of ram. The Hero's have 288 and so do the 32A board Sapphire phones like the HTC Magic and the Rogers Magic. Since we were unfortunate to get that low of Ram, if you try to run a hero rom without the linux partition, the phone will lag, freeze, and get load screens constantly. Using a linux swap partition makes it possible to run the Hero ROM's at a decent speed, though it will not be as fast as if you had the actual HTC Hero phone or a 32A Sapphire.

[Q] UH-OH

Got a bit of a problem folks,, hope to get some help...
i have been running TNT lite since i got the tab and was up to 4.1 and started getting the acore force closes. so i followed some threads and installed clockwork and did the partition reformate and wipe data,,,,
now when i reboot, it gets the birds splash, and moves to the G-tablet boot image (i have the dancing droid one) and it hangs,,,,,,, nothing....
any ideal how i "fix this"...
thanks for any help because as you can see i am at a stop!
jake
I had some issues with my first tab similar to what you are having. The only way I solved it was by reflashing and wiping all date, which takes you back to the EULA. Good luck.
Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt
Make sure you are using bekits .8 CWM release. The latest release of CWM gave me fits, the only thing that would install was CM 7.
This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help
jasco13 said:
Do you have functional recovery? I'm guessing yes since you partitioned. Go to recovery and flash the rom again. You can mount the usb drivers in cwm to start usb mass storage so that you can download the rom on your computer and transfer to tablet. You can also put rom on external sd card and install from cwm.
When you partitioned the storage you deleted everything including the os. I believe it warned you of that before you did it.
If no recovery then you will have to nvflash. Search nvflash and bekit to get the nvflash info.
Matt
Click to expand...
Click to collapse
I "think" i tried this last night. I have 4.1.4 Update.zip and recovery folder on an USB stick. In CW, i went to "mount USB" (thinking i could access my USB and install from there) but ???? i didnt see anything and the only options were install update.zip from SD, and from Location but no USB option, and of course no way (that i saw) to brows to another location to "pick" where i wanted to install from.
Im thinking i am missing something with this step, or just plain old doing it wrong..
TheJesus said:
This isn't an Android Development topic, its a General topic, but don't worry about it, a mod will move it.
As to the question, like the others said. Use CWM .08, Wipe System, Wipe Cache, Install zip from SD Card, Install your choice of ROM (in your case, TnT Lite 4.1), Install gApps.zip, Reboot system now. That should get you up and running.
I am confused about you saying that you just now installed CWM but have been running TnT Lite. How would you have done that or do you mean you tried to update CWM or do you mean you have been using the stock TnT?
Also, feel free to hop on the #Tegratab IRC on Freenode if you need fast troubleshooting. Someone is usually on there to help
Click to expand...
Click to collapse
I have been installing the Roms, by downloading, taking the two "files" and moving them to my tab, and then rebooting with the power volume up,, ,finds the update and installs the ROM. its worked for all of them since 2.2...i thought i read that was an acceptable means of installing the ROM.????
as far as getting the files onto my SD (now). How? my computer doesnt see the tab because it is just hanging on dancing andy(unless there is anothe way of making it "see it", i cant seem to figure out how to get CW to read from my USB drive.....
Im just plain "stuck".
I am by no means a Android guru, and up to this point havnt had problems in the past... I TRULY am thankful for ANY help and all help i have recieved...
thanks folks
Jake
power off the tablet.
hold vol+ then power till u see recovery key pressed in the upper left corner of the screen. it will appear while the birds are still on the screen. If you get to the g tablet screen power off and repeat till u get into cw recovery.
Using volume +/- to navigate up and down Home to select and back to go back one level
Navigate cw recovery till u see mount usb storage i think its under partitions.
when you see usb mounted hook up the usb cable to the computer to the tablet mini usb port. copy the rom of your choice to the tablet. u only need the update.zip
once copied unmount usb storage.
back out till u see apply update.zip
Install and reboot u will be good to go.
of course flash gapps if u know what that is and want market on the tab.
Enjoy.
jakehale said:
i cant seem to figure out how to get CW to read from my USB drive.....
Click to expand...
Click to collapse
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn
BigJohn89 said:
CW Won't read your USB drive. The "Mount USB" option in CW is to mount your tablet onto your computer as a USB storage device. By doing so, you can push files over to the tablet's internal storage from your computer.
BigJohn
Click to expand...
Click to collapse
Agree. That is what I was talking about earlier, I just couldn't remember what it was labelled in CWM. Mount the USB to your PC and push over the file. Then in CWM choose install from sdcard (I think, too lazy to look). Navigate to the rom file and run it. All should be well after that.
Matt
I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.
japhule said:
I've had issues with the dancing droid boot animation (as have many others) where it won't get past the boot screen. I wouldn't recommend it for anyone.
Click to expand...
Click to collapse
How do i get the stock one back? im kinda tired of him also

[Recovery] ClockWorkMod 4.0.1.5 ext4 Updated: 08/22/2011

Update: 08/22/2011
CWM 4.0.1.5
Code:
Changelog:
https://github.com/CyanogenMod/android_bootable_recovery/commits/gingerbread
Also changed the Init logo. You should like it :P
This brings you up to date.
DOWNLOAD
Internal: http://krylon360.com/file_host/G2x/nvflash-internal-08222011.zip
External: http://krylon360.com/file_host/G2x/nvflash-external-08222011.zip
To flash, use NVFLASH.
I am using Chris's nvflash script from the original cwm. I modified it to flash the new recovery image.
Instructions
Power off phone
take battery out
hold vol up and down and plug in USB
You wont see anything, but it should mount
(If you get an error USB Device not found after running the script, unplug from pc and phone, and redo it)
extract file
type ./flash-recovery.sh and enter
once you see .img sent successfully, unplug usb and put bat back in
hold vol down + power, once you see the 2nd logo, let go
OLD!
This is the newest version of CWM compiled from Source. Along with this comes some much needed changes.
1st and foremost: I am not responsible for any bricks. Know what you are doing before attempting this.
Code:
New Version Changes 06/16/2011
Reverted back to Yellow Color Scheme (this was causing source not to sync)
What ever else changed with the source
This is just to bring you guys to the latest CWM Source.
New Host :)
Changes:
Red font (Much like Voodoo Red CWM) to show EXT4 Support
Able to backup and restore both ext3 and ext4 without any issues
(restore ext3 over ext4 and vice-versa)
EDIT: 2 versions now avail. These instructions are for the Internal SD version only
CWM now mounted to Internal SD. Brought back flashing from Internal SD due to request.
External SD is also mounted, however at this time, unable to flash from both internal and external.
If you would like your old CWM backups, be sure to copy over the Clockworkmod folder from your external to your internal sd.
External version instructions.
There aren't any. Flash as you are use to with the 3.0.2.7 Yellow recovery
To flash, use NVFLASH.
I am using Chris's nvflash script from the original cwm. I modified it to flash the new recovery image.
Instructions
Power off phone
take battery out
hold vol up and down and plug in USB
You wont see anything, but it should mount
(If you get an error USB Device not found after running the script, unplug from pc and phone, and redo it)
extract file
type ./flash-recovery.sh and enter
once you see .img sent successfully, unplug usb and put bat back in
hold vol down + power, when you see the BLUE LG LOGO, let go of the buttons. There is no more ANDROID logo.
EDIT: 05/24/2011
New Update.
Updated 2nd Boot Logo, now no longer Blue LG
Fixed USB Mass Storage option. Now mounts to the PC when selecting.
Reboot option is due to a kernel issue on stock. If you have CM7, this works though.
Thanks oh masterful krylon!
Sent from my LG-P999 using XDA Premium App
how about two versions? one for internal and one for external?
Nismo300zx said:
how about two versions? one for internal and one for external?
Click to expand...
Click to collapse
I knew someone would ask this. LOL
we going up! thank you!
there you go. 2 versions now up.
Internal SD version
and
External SD version
Please excuse my ignorance! In layman's terms, what benefits will I see over the original cwm recovery?
instigator008 said:
Please excuse my ignorance! In layman's terms, what benefits will I see over the original cwm recovery?
Click to expand...
Click to collapse
you can now backup and restore ext4 based partitions.
This also give the option to have the latest cwm, and gives the option to be able to flash from internal sd if you happen to have a small microsd, anotherwords if you have only a 2gb microsd, go for the internal version because that will give you more space for roms, kernels, and mods, and backups.
Thanks Krylon!
krylon help!!! i downloaded external file cuz i have external sd and thats what ive been using and went to extract but my computer sayin format unknown or damaged n wont let me do anything with it im using winrar then tried internet explorer no go any ideas?
sarni84 said:
krylon help!!! i downloaded external file cuz i have external sd and thats what ive been using and went to extract but my computer sayin format unknown or damaged n wont let me do anything with it im using winrar then tried internet explorer no go any ideas?
Click to expand...
Click to collapse
try redownloading it...it unzips fine for me with winrar
sarni84 said:
krylon help!!! i downloaded external file cuz i have external sd and thats what ive been using and went to extract but my computer sayin format unknown or damaged n wont let me do anything with it im using winrar then tried internet explorer no go any ideas?
Click to expand...
Click to collapse
7zip FTW!
the file is valid.
UPDATED to support new recovery: [GUIDE] How to set up and use NVFlash to flash CWM recovery
recovery image has been mirrored aswell: p999-ext4-external-recovery.img
Works great thanks!
can someone plz help i got it extracted didnt have to be extracted anywhere specific rite? and what is the next step after i extract it?
UnionMount/aufs/unionfs?
Anybody remember the discussions and use of aufs (https://secure.wikimedia.org/wikipedia/en/wiki/Aufs) and unionfs (https://secure.wikimedia.org/wikipedia/en/wiki/UnionFS) back in the G1 days? Lots of discussions here in XDA about it but I believe it was available in haykuro, cyanogen and jesusfreak builds. It allows two separate filesystems to appear on the same mount point. I'm not sure what issues exist with it today but maybe some of the kernel hackers could comment?
Anyone else notice that the SD card space free is messed up on the external version? Still seems to be reading the free space from Internal, although SEEMS to be backing up to external SD (as its not failing w/ on 300MBs free)
EDIT: LMAO! Guess i accidentally flashed the wrong version. That's what happens when I work on my phone before coffee........
anyone? idk been trying for an hour i guess il just keep regular recovery aint that much of a diff sux i wanted the new one but after i extract get lost from there
sarni84 said:
anyone? idk been trying for an hour i guess il just keep regular recovery aint that much of a diff sux i wanted the new one but after i extract get lost from there
Click to expand...
Click to collapse
Take a read at the GUIDE thread in this very same forum: http://forum.xda-developers.com/showthread.php?t=1054492. First post has a good step-by-step.
short/y said:
Anybody remember the discussions and use of aufs (https://secure.wikimedia.org/wikipedia/en/wiki/Aufs) and unionfs (https://secure.wikimedia.org/wikipedia/en/wiki/UnionFS) back in the G1 days? Lots of discussions here in XDA about it but I believe it was available in haykuro, cyanogen and jesusfreak builds. It allows two separate filesystems to appear on the same mount point. I'm not sure what issues exist with it today but maybe some of the kernel hackers could comment?
Click to expand...
Click to collapse
Yeah, I remember the Apps2SD via unionfs by MarcusMaximus. TheDudeofLife had it incorporated in his Cupcake builds....ahh, the good old days.

[Q] Problems with stock rom after trying custom rom's

ok here is my problem i flashed custom roms trying to see what they were like on the tf101, after flashing cyanogenmod my sd card no longer mounted so that was kind of a deal breaker so i flashed the stock rom back to the device and my sd card still doesn't mount unless i use paragon NTFS +HFS and format it as NTFS and then mount via the app. (NTFS and fat32 worked fine by default with no app in the stock rom)
then i tried the ubuntu touch os for phones and tablets, keyboard freaked out and closed every time i went to type so again back to the stock rom now wifi doesnt work right and it wont get on the internet half the time or see other computers on the network. anyone know a fix for these issues?
both of these things worked fine before using custom roms/os's.
nvflash it back to total stock, since there is probably leftover junk from when you flashed your device that is causing things to not work.
Wheelie (NvFlash)
androidroot.mobi
Images
xdafileserver.nl

[q] sd-ext partition is not mounting!

So the other day I decide to get a new SD Card and gift myself with a sd-ext partition so my FIT can have more apps than it already has. :laugh: After creating the partition succesfully I installed Link2SD and tried to install the script. This somehow didn't work.
Then I tried flashing the darktremour apps2sd script and using the apps2sdgui application, which again gave no fruitful results. A2SDGUI displays a message saying could not start for one of these reasons:
1. Device not rooted
2.A2SD Script could not be found.
3.No EXT partition found.
Now I know that the script did get installed successfully. My device is obviously rooted. So finally it boils down to 'No EXT partition found'. I tried mounting the sd-ext partition from the recovery and booting the device, to no effect. :crying:
I would appreciate it if anyone can help me with the issue. I really need that ext partition!
PS: I'm using Official CM7 ROM without any additional scripts other than apps2sd script.
I remember when I bought a new sdcard(class 10), my FIT(with 2.3.6 gingerbread/based rom) didn't even recognized it. Then the shop guy formatted it from the phone itself & then my FIT detected it. Then I created the ext4 partition(512mb) using cwm recovery 5.0.2.7 & all is well since then.
So I can only advice u to first backup the sdcard contents & format it from ur phone; then use 5.0.2.7 cwm recovery to partition it & hopefully all will go well for u too.
Also maybe the A2SDGUI app is conflicting. & there are some roms in which ext4 partition don't work/mount(my experience) but it should work for official cm7. I have cm7 of 28-10-2012 & 01-03-2013(last build) but I faced serious call issues in the last build: other person keep listening the callertune while my phone didn't even ring. So I reverted back to cm7-20121028-NIGHTLY-s5670.zip:sly: & it worked like charm.
Galaxy_Rohit said:
I remember when I bought a new sdcard(class 10), my FIT(with 2.3.6 gingerbread/based rom) didn't even recognized it. Then the shop guy formatted it from the phone itself & then my FIT detected it. Then I created the ext4 partition(512mb) using cwm recovery 5.0.2.7 & all is well since then.
So I can only advice u to first backup the sdcard contents & format it from ur phone; then use 5.0.2.7 cwm recovery to partition it & hopefully all will go well for u too.
Also maybe the A2SDGUI app is conflicting. & there are some roms in which ext4 partition don't work/mount(my experience) but it should work for official cm7. I have cm7 of 28-10-2012 & 01-03-2013(last build) but I faced serious call issues in the last build: other person keep listening the callertune while my phone didn't even ring. So I reverted back to cm7-20121028-NIGHTLY-s5670.zip:sly: & it worked like charm.
Click to expand...
Click to collapse
I did partition the SD card from the CWM Recovery.. Now, I don't understand how the A2SDGUI app is conflicting. It is just an app to manage the partition rather than using commands in the terminal.
Anyway, I tried the unofficial versions of CM7 and now I have a working partition. I used Link2SD to install the scripts. Link2SD installs the ext4 scripts , even thought the partition is ext3. Well, I can't complain as long as everything is working
Thanks for the reply though. :good: :highfive:

Categories

Resources