Related
Ok so I replaced my own digitiser to save £100 at the repair shop.
All went ok and the phone works fine now apart from the camera - which crashes every time I open it. Same result with any app, one app said it couldn't connect to the camera and then closed, so I guess I've done something to it.
All looks ok, no loose connections, but camera still fails. Any ideas?
Had this with my legend mine turned out to be a connection on the actual camera shorting out,Check all the pins around the camera pod for damage
bonesy said:
Had this with my legend mine turned out to be a connection on the actual camera shorting out,Check all the pins around the camera pod for damage
Click to expand...
Click to collapse
Yeah checked and all seem ok, but the camera is still borked so it's gotta be something like that.
I'll open her up again for another check, just hope I can fix it. Mightily annoying having no camera.
Oh well
Also check to see that no wires get crimped or smashed down when you put everything back together. I replaced a friend's iPhone digitizer and had something pretty similar happen. The connection was there but stuff wasn't working right. Took it apart and saw wires were sort of smashed so was more careful the next time. No wires were damaged or anything and after doing it again everything worked perfectly and still does.
Sent from my LG-P999 using xda premium
e4e5nf3nc6 said:
Also check to see that no wires get crimped or smashed down when you put everything back together. I replaced a friend's iPhone digitizer and had something pretty similar happen. The connection was there but stuff wasn't working right. Took it apart and saw wires were sort of smashed so was more careful the next time. No wires were damaged or anything and after doing it again everything worked perfectly and still does.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Good tip thanks, will try that tonight.
Hi all, can confirm the same problem, on the same phone, and the same sort of solution, thanks to your suggestions.
It came down to the black lock block on the ribbon connector being askew. Very fiddly to put back but now the camera works....Hmmm better check the front camera now.....
So I ordered a new LCD and digitizer from new harbor via amazon.
I took the phone apart, installed the new array, and powered it on, and the screen is great (maybe even brighter than the last one) but it just has zero touch input.
The last screen worked fine, but the LCD was broken. I could have it acknowledge touches so I dont think that the motherboard or anything else is broken, so I wonder what may have went wrong.
Should I take this mofo apart again and see if I have a loose connection? Maybe the ribbon cable is not connected right?
Probably the past is DOA?
Help please! thanks.
stevenjcampbell said:
So I ordered a new LCD and digitizer from new harbor via amazon.
I took the phone apart, installed the new array, and powered it on, and the screen is great (maybe even brighter than the last one) but it just has zero touch input.
The last screen worked fine, but the LCD was broken. I could have it acknowledge touches so I dont think that the motherboard or anything else is broken, so I wonder what may have went wrong.
Should I take this mofo apart again and see if I have a loose connection? Maybe the ribbon cable is not connected right?
Probably the past is DOA?
Help please! thanks.
Click to expand...
Click to collapse
Try the screen calibration.
Sent from a dream.
Teichopsia said:
Try the screen calibration.
Sent from a dream.
Click to expand...
Click to collapse
Is this somewhere in the service menu? I can boot into its custom menu by holding down volume and power... Not sure if there's more to it.
It's rooted s-off so I get menus to get into recovery or fast boot etc
Sent from my SCH-I535 using xda app-developers app
Scratch that. Just re read your post. "Zero touch input". It's an option in the rom.
There are a few threads/posts where people have replaced the screen, either here or the dhd forum. Check what they had to say. I have absolutely no experience in that. Perhaps it's a cable as you said, but before doing that, I would research on it first. You may end up like me with 9 screws left over after taking apart my ps3 three times (screwing it up even more).
Sent from a dream.
Teichopsia said:
Scratch that. Just re read your post. "Zero touch input". It's an option in the rom.
There are a few threads/posts where people have replaced the screen, either here or the dhd forum. Check what they had to say. I have absolutely no experience in that. Perhaps it's a cable as you said, but before doing that, I would research on it first. You may end up like me with 9 screws left over after taking apart my ps3 three times (screwing it up even more).
Sent from a dream.
Click to expand...
Click to collapse
Removing and taking it apart isn't a problem. There are only eight screws.
This isn't fun... To be certain.
Sent from my SCH-I535 using xda app-developers app
stevenjcampbell said:
Removing and taking it apart isn't a problem. There are only eight screws.
This isn't fun... To be certain.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Did you ever get this taken care of?
Just replaced mine. LCD intact. Touch no longer working. They aren't kidding: this phone isn't fun to work on. It's a *****. I've repaired a half dozen iPhones. This makes that stuff seem rudimentary.
Sent from my Desire HD using xda app-developers app
I've had my inspire apart several times. Other than removing the Flash/GPS, and separating the LCD from the frame its quite simple. If you want a pain try a slide phone.
stevenjcampbell said:
So I ordered a new LCD and digitizer from new harbor via amazon.
I took the phone apart, installed the new array, and powered it on, and the screen is great (maybe even brighter than the last one) but it just has zero touch input.
The last screen worked fine, but the LCD was broken. I could have it acknowledge touches so I dont think that the motherboard or anything else is broken, so I wonder what may have went wrong.
Should I take this mofo apart again and see if I have a loose connection? Maybe the ribbon cable is not connected right?
Probably the past is DOA?
Help please! thanks.
Click to expand...
Click to collapse
Understand your pain because just recently I had to change my entire screen for my Inspire 4G. I assume that you did everything correctly but here is the video that helped me on youtube:
HTC INSPIRE Screen Repair and LCD / DIGI REPLACEMENT from phonedoctors
If you did everything correctly it could just mean that you prob got a faulty part
Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
ProfessorJ said:
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards
Click to expand...
Click to collapse
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app
OuncE718 said:
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Out of curiosity could you link a video? doesnt have to be the N5 Board
ProfessorJ said:
Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper
Click to expand...
Click to collapse
As soon as you dropped it in water you should have turned it off and left it off for days and possibly even took a hairdryer to it or let it sit in front of the heat vent.
Number one mistake is trying to turn it on. If anybody else drops the nexus in water. Because it has no removable battery cover. Rice won't do the trick. It would take way too long and the water would have already rusted the metal components and trashed all the pop connectors. If you drop the phone is water. Quickly take the entire phone apart. Than put all the pieces in rice. That will allow the rice to actually absorb the left over water. YouTube "nexus 5 tear down". Its always a good thing to know how to do this.
Sent from my Nexus 5 using xda app-developers app
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
Bravo!
Sent from my Nexus 5 using xda app-developers app
ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
I'm glad I could help. Now please help me and hit the thanks button.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.
I believe I am having the same problem as you. I briefly dropped it into a creek for no more than a few seconds. That was enough to make the display unresponsive to touch. I was able to power down and quickly did so.
Unfortunately I wasn't near any rice immediately (motorcycle) so I put the phone in my mesh jacket in 100F weather and hoped for the best. I left it off at this point. When I got home I turned it back on (stupid I know) and the N5 didn't boot, only stopped at "Google" boot. I powered down the phone and rebooted, this time it worked. A quick checkup showed the external speaker didn't work for Play music, but did work for T-mobile visual voicemail. Also, the earpiece didn't work when I attempted to make calls.
At this point I realize I probably screwed up the phone big time. Once I realized not all components were working I put the phone in a ziplock bag with brown rice new from the store. I guess I'll let it sit for 48 hours and then attempt again. If it doesn't work, I'll attempt taking the phone apart and cleaning each part. And I'm really only going to attempt that because this phone isn't even paid off!!
These phones need to be made tougher! I am losing hope that there's any chance of my phone surviving at this point.
jaymzb0nd said:
Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.
Click to expand...
Click to collapse
Nexus 5 Water damaged
OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I dropped my nexus 5 in the pool while I was on vacation. When i came home i clean all the parts with rubbing alcohol, my phone worked! A day later i tried again but my phone froze on the start-up screen (with the magical floaty balls) and i haven't been able to turn on my phone since i got it to work. What should i do? is it worth saving? PLEASE HELP!!!:crying::crying::crying:
Nexus 5 Water damaged
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers
tolmike23 said:
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers
Click to expand...
Click to collapse
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!
vin4yak said:
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.
tolmike23 said:
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.
Click to expand...
Click to collapse
If you buy a new LCD, how will you know the Motherboard still works? Then what if you have to buy new motherboard?
Cut your losses. Replace the whole phone. Then get insurance
This ^
Spending money on a water damaged device is usually money wasted. Cause there's usually more things wrecked you find out along the way.
Save the money to go towards a new device.
I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks
saman0suke1 said:
I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=56142150
A friend of mine had a Galaxy S3 Amber with a broken (and blank) screen and wanted her data from it's internal memory that is locked and not in debugged mode. I did a lot of research and found the best, most efficient way was to do a motherboard swap with another gs3. I had a Galaxy S3 Blue. I watched a couple of videos and it seemed rather easy. I gathered the proper tools and was EXTREMELY careful not to break or rip anything (and to my knowledge i did not). When i put her motherboard from the amber one into the blue one and the screen would not come on. My first thoughts were it must be her motherboard that went bad. Well when i went to put my blue gs3 back together (again being very careful this entire time) I'm now having the same issue as she was. Black screen, no back light. The bottom lights DO come on and i feel it vibrate when i get a message. There was also no power on chime...
I know its hard to tell with out looking but any ideas on what could be wrong or what i might have screwed up? i checked all the connections and everything looks perfect. Nothing is bent or connected wrong and I didn't force or break anything.
update: so i found that the touch part of it still works fine. i can hear the ripple unlock as well as all the other sounds and such when i touch around and i can here it opening apps. the only issue lies in the screen itself being blank with no back light what so ever,
First of all remove the battery and attempt to power on, then leave without battery for 1 min, I know this sounds silly but it worked on an old iPhone 3G so anythings worth a shot.
If that doesn't work go back into the S3 and make sure all the data clips are firmly in place and locked down but not twisted in anyway. Also make sure their is no moisture or dust on the ribbons. You may not realise it but even the smallest imperfection with this can cause massive issues down the line.
If all else fails her phone may have broke your screen, I don't know how but it is a possibility
Hope I could help and good luck
TechMinerUK said:
First of all remove the battery and attempt to power on, then leave without battery for 1 min, I know this sounds silly but it worked on an old iPhone 3G so anythings worth a shot.
If that doesn't work go back into the S3 and make sure all the data clips are firmly in place and locked down but not twisted in anyway. Also make sure their is no moisture or dust on the ribbons. You may not realise it but even the smallest imperfection with this can cause massive issues down the line.
If all else fails her phone may have broke your screen, I don't know how but it is a possibility
Hope I could help and good luck
Click to expand...
Click to collapse
so i took it apart again today to double check and clean everything and under inspection i noticed a teeny tiny slit on the edge of the lower, bigger ribbon. i know the smallest bit could be horrid. Any fix and would that cause just the screen to not show? i don't know if that is the led connection but i think it may be.
amshook said:
so i took it apart again today to double check and clean everything and under inspection i noticed a teeny tiny slit on the edge of the lower, bigger ribbon. i know the smallest bit could be horrid. Any fix and would that cause just the screen to not show? i don't know if that is the led connection but i think it may be.
Click to expand...
Click to collapse
If theirs a slit I'm affraid that could be it for the screen, like I said even the smallest imperfection can cause massive issues. The slit is probably in the one of the data sections of the ribbon cable which is why data for the screen isn't being carried.
For the fix I don't think their is one unless you can fit a new ribbon on to yout S3's screen
Sorry about the screen
So I took it all apart again. Cleaned ever little thing I could and now it works again. ?
amshook said:
So I took it all apart again. Cleaned ever little thing I could and now it works again. ?
Click to expand...
Click to collapse
Excellent, must have just had some dust or gunk on the cable
Glad you got it working again:victory:
TechMinerUK said:
Excellent, must have just had some dust or gunk on the cable
Glad you got it working again:victory:
Click to expand...
Click to collapse
As am I. Thanks alot for helping. I appreciate it. id buy you a beer if I could lol.
amshook said:
As am I. Thanks alot for helping. I appreciate it. id buy you a beer if I could lol.
Click to expand...
Click to collapse
No problem, thats what XDA is here for:laugh:
I just dropped my P900 and it went completely dark. :crying: There's no mark, not a crack, nothing, but the display is completely dark. The touch buttons on each side of the home button lights up, but the display does not.
Any advice? Or it is Samsung support next?
May the ribbon for the display is disconnected from the circuit board.
poetryrocksalot said:
May the ribbon for the display is disconnected from the circuit board.
Click to expand...
Click to collapse
Yeah, maybe I should open it myself and have a look. Are there any warranty seals that I will break if I pry it open? I have all the tools necessary, but are there any guides for opening the P900? I wouldn't want to break anything...
bluebirch said:
Yeah, maybe I should open it myself and have a look. Are there any warranty seals that I will break if I pry it open? I have all the tools necessary, but are there any guides for opening the P900? I wouldn't want to break anything...
Click to expand...
Click to collapse
This is a video on replacing the battery but it helped me when I re-soldered the battery connection on mine.
https://www.youtube.com/watch?v=VeSG0hHpAG8
I've opened mine a few times and haven't noticed any specific seals but mine was refurbished to start with.
Also I have the proper tools but found a guitar pick was easier to use personally on this tablet.
Starting at the power port to remove the back made it a lot easier for me, its pretty hard to get anything between the back cover and the tablet in other areas.
poetryrocksalot said:
May the ribbon for the display is disconnected from the circuit board.
Click to expand...
Click to collapse
This was indeed the problem! The connector has some kind of snap lock that had come loose. So easily fixed. Thanks for encouraging me to try to fix it myself. :good:
Glad I helped!
Sorry to hijack your thread but figured my problem might be related.
About 2 weeks ago I charged my tablet and stored it away. The other day I tried to use it and it wouldn't turn on. I tried to charge it but that didn't work either as there isn't even charging activity on the screen. I ordered a replacement battery thinking it might be that, but I was wrong. I still can't make it turn on. Any ideas what it can be? Thanks
bluebirch said:
This was indeed the problem! The connector has some kind of snap lock that had come loose. So easily fixed. Thanks for encouraging me to try to fix it myself. :good:
Click to expand...
Click to collapse
I had a similar experience. 3 weeks ago the 1x my SM P-900 is out of its protective case, it falls 2.5 ft off a table. Hits the floor. No visible cracks or breaks. I could hear hear it operating but the screen was black. Took 3 weeks to talk myself up to it but I pried off the back & used a magnifier glass to c.a.r.e.f.u.l.l.y check every ribbon connect. 1 connector's pins were very slightly off alignment. Couldnt find anything else. Put it back together...Yes! Screen works. All seems good. Took the back off again & securely taped over every ribbon connect I could find. Long time intermittent screen flicker issue (when battery was below 40%) also seems to be gone. That has been the best, eye squintin', back hunchin', shallow breathin', micro-screw wrangling, time investment my non-hardware tech self has ever spent. Wooo!