Hi,
It is already for some time that I can't enable the data connection on my ZTE Blade. When I toggle "Data connection" in the settings menu it just doesn't do anything - up and down arrows representing a connection do not show up. It was working before.
Technical details:
Firmware: JOHN77_AIO5 (built from CyanogenMod Green V4)
Android 2.3.4
Kernel version: 2.6.32.9-perf
My question is: is there any option I can debug this through adb or by any other mean? I am a developer (not JAVA, though) - so it is not going to be a problem.
I assume that flashing the device with fresh firmware will solve the problem, bu I don't want to go the easy way
Bump......
Related
I attempted to use this ROM: [4.2.2][OFFICIAL] LiquidSmooth v2.3 - d2vzw|d2usc - 05|04|13
http://forum.xda-developers.com/showthread.php?t=2148261
Summary:
The android phone process crashed whenever I would try to make a phone call.
The Wifi Tether did not work. It would fail to start the Access Point (AP).
Specifics:
com.android.phone process kept crashing while making calls. It would ring, crash, then disconnect the call.
Wifi tether would not work with the Wifi Tether TrevE Mod - WifiTether-TrevE_Mod_11_22_2012_driverReload2
http://forum.xda-developers.com/showthread.php?t=1988735
My wifi tether settings were:
Galaxy S3 - Netd-ndc with driver reload
-Device-Profile: Leave this on auto (default)
-Netdndc Max Client Cmd: Required for GS3ish devices. If not enabled you will likely get an AP but cannot connect.
-MSS clamping: on (default)
-Routing fix: on (default)
The wifi tether application would fail to start the Access Point (AP). I was indeed using SuperSU which I had to install manually since LiquidSmooth comes with SuperUser by default.
I recently updated my modem and rpm to:
Baseband version: I535VRMBM1
This modem update was done after checking to see if the Wifi Tether would work but before I had tested the phone calling function.
If there is anymore information that would be useful let me know and I will update.
Thanks everyone!
Sorry for not posting in the relevant subforum, but I am in the newbie prison. Please release me if you can. Thx.
I updated my hardware to this: http://forum.xda-developers.com/showthread.php?t=969411
now wireless is broken ? ?
Build number now says: 'imx51_Utopia_xaumod_0.12'
Printed manual says: Android 2.2 MID, Model FR-809 with Freescale A8 (Mx515)
Kernel Version: 2.6.31-01012-g4f92f83-dirty [email protected] #40
Model number: imx51_bbg
Wi-Fi - Turn on
'Turning on ...' - works, and green tickbox switches to ON
then 'Scanning ...' appears, and sometimes "Unable to scan for networks"
then WiFi switches itself off after less than a minute.
And advanced ... MAC address says: Unavailable
Is this problem "Unable to scan for networks" after upgrad known, and easy to fix?
Is there something wrong with the Wifi support of this
"XAUMOD firmware" http://forum.xda-developers.com/showthread.php?t=969411
what to do?
Secondly, could I also upgrade that hardware to android 2.3 ? How?
thx a million!
just testing ...
... am I still in newbie prison?
Hi,
got a Snopow M8 phone and face several issues:
- nastiest one: incomming call that I accept seems to "restart" the phone network: I need to enter the simlock-pin and temporarely I have no GSM connection (does not appear when I make a call)
- Youtube does not work (gapps installed, rest works fine) - error messages is something like "Google Play Services is not supported on your device" - message is in german as my phone runs german android.
- Some other apps (like PayPal) do not run (not supported on your device) - most oder do.
MTK 6589
Android Version: 4.2.1
Baseband: MOLY.WR8.W1248.MD.WG.MP.V7,2014/01/06 21:16
Kernel Version: 3.4.5
Build: F04_ENGLISH_26_V0.1_EMMC_V3_20140324
I managed it to do a factory reset and installed CWM 5.5. but I could not find any cusotm roms that might solve the issues.
Further I am not certain.... The phone has a PTT app (400-480MHz) can it run (with a different ROM) also 144-148 MHz?
Any hint is highly appreciated.
Thx for reading
Peter
Can you share your modem.img?
Hi can you share your modem.img ??
MTK 6589
Android Version: 4.2.1
Baseband: MOLY.WR8.W1248.MD.WG.MP.V7,2014/01/06 21:16
Hi, I also own the phone, can you show me how to install CWM 5.5 on your device ?
Thanks in advanced
Hi
Have you figured out how to install CWM?
Speaking of issues - can you activate NFC properly from Settings menu?
Hello!
As per the rules in this section i have tried searching for other USB tethering issues and I found this thread: https://forum.xda-developers.com/idol-3/help/usb-tethering-t3352376
His solution was to use easy tether, this can't work for me as I am tethering to a Router. I have tried clockwork-mod, PDA Net and easy tether, and they are not compatable with my ASUS RT-AC56R.
Here is some information about my Idol 3:
TWRP: LUX 3.0.2-r5 for Alcatel idol 3
Device Model: 6045O
CyanogenMod version: 12.1-20160715-UNOFFICIAL-idol3
Android Version: 5.1.1
Kernel Version:
3.10.49-gac18c2b-dirty
[email protected] #1
Sun Jul 3 17:00:27 CEST 2016
Build Number: cm_idol3-userdebug 5.1.1 LMY49j73aa3e58e3 test-keys
Partitions and Sizes ( from TWRP ):
Aboot(1MB), Boot(32MB), Recovery(32MB), System(771MB), Data(4386MB), Cache(0MB)
Modem(50MB), Modemst1(3MB), Fsg(1MB), Persist (0MB), Misc(1MB), Splash(16MB)
Hyp(0MB), Tz(0MB), Rpm(0MB), Sbl1(0MB)
Here is what works:
Bluetooth Tethering
WiFi HotSpot
Easy Tether to my PC
PDANet to my PC ( actually bought the app it works well in all other cases )
ClockWork-Mod tether to PC
What does not work is:
Native USB Tethering
SD card totally broke not even showing in TWRP
Specifically when i plug the phone into the router with MTP or PTP not charge only and attempt to toggle USB tethering it says "USB connected, Check to Tether" I tap the switch and it disappears for a second and then shows up again, not enabling USB tethering.
I don't know if i need to upgrade to a different ROM or if i need to re-flash the modem but any information, suggestions or thoughts on what I can do at this point will be greatly appreciated
ROM Problem. You'll have to upgrade.
My device info:
Build number: rk3368-userdebug 9 PQ2A.190205.003 eng.hct2.20190411.192110 test-keys
Kernel version: 4.4.167
MCU version: MTCE_GS_V3.07_3
In settings menu I don't see lot of std android settings (probably hidden for normal user).
I would like to enable split screen (it is disabled by default - 7 inch screen), but I can not enter developer options.
Standard android way with tapping build number is not working.
I also tried apps (e.g. "developer options) but it does not work - it shows "First enabled developer options".
I also tried rooting (simple way) with code (*#htc#root#) in factory settings, and with kingoroot. It does not work.
Do I need use adb for that?
Additionally clock is not working properly. After vehicle shutdown signal - radio is falling a sleep. After wakeup it looks like time freeze.
If I activate GPS time adjust it makes clock late 30 minutes.
If I activate internet time update it makes clock late 1h - probably because of winter / summer time switch, but I don't see that setting (also hidden).
Any help would be pleasent
I would try to change to stock rom.
But Im not sure if that would be even possible if I do not enable developer options first and next usb debug to access adb and flash mode.
Maybe it could be done by MCU update file? somehow make it to change system configuration?
SZAMAN92 said:
I would try to change to stock rom.
But Im not sure if that would be even possible if I do not enable developer options first and next usb debug to access adb and flash mode.
Maybe it could be done by MCU update file? somehow make it to change system configuration?
Click to expand...
Click to collapse
for what vehicle is that HU ?
i have same for opel, and have problems with stering wheel buttons, when i press next or back button it react like i press it 2 or 3 times :/
do you know how to enter recovery in that unit? maybe flash other MCU file ?
It is my device
https://xtrons.com/renault-megane-iii-fluence-android-9-0-pa79mg3rip
For me wheel buttons work well.
However try to check factory settings
Settings > Factory settings > enter code (126 in my case) > Keys
I have there option to change CAN bus to proper vehicle model.
Unfortunetaly I don't have experience with flashing such devices. Until now I was flashing only smartphones.
There were lot of tutorials how to do that. For Android auto HU I dont know even how to start.
For smartphone you could enter recovery by adb, but first you need unlock USB debugging. If you have access to developer options you could do that - that is not my cas.. sadly.
EDIT:
I found solution for time issue
https://forum.xda-developers.com/showpost.php?p=72946736&postcount=4
EDIT2:
Better solution
1. Get root
https://forum.xda-developers.com/showpost.php?p=76725981&postcount=740
2. Use that app
https://play.google.com/store/apps/details?id=ru.org.amip.ClockSync&hl=pl
EDIT3:
1. Malaysk ROM!!!
Clock work without any problem, I have split screen on my 7 inch device