[Solved] Cannot use O3D with Windows 7 64 bit - LG Optimus 3D

For some reason whenever I connect my O3D to my windows 7 64 bit laptop it says device driver not successfully installed and when Windows searches for drivers finds none. So I cannot update via pc
Anyone found a way to get the phone working with 64 bit?
Thanks
Dave
EDIT: eventually found a way around it, ironically about ten minutes after posting this. Had to redownload the usb drivers and then disconnect the laptop then reconnect, still doesn't recognise the phone but update tool does although the site says phone update is out but update tool says no I can't update.

Related

Trying to install drivers on windows xp

Im coming from a mac so i picked up an older PC running windows xp so i could download Odin and flash my phone since its pretty much useless right now. I can install the drivers and the computer recognizes my phone but when i plug it in it says new hardware Samsung android USB Modem.
so i try to install it and it always gets stuck trying to install C:\windows\system32\drivers
it tells me that it might not function properly because it wasnt installed correctly.
I dont know what else to do
Smallsmx3 said:
Im coming from a mac so i picked up an older PC running windows xp so i could download Odin and flash my phone since its pretty much useless right now. I can install the drivers and the computer recognizes my phone but when i plug it in it says new hardware Samsung android USB Modem.
so i try to install it and it always gets stuck trying to install C:\windows\system32\drivers
it tells me that it might not function properly because it wasnt installed correctly.
I dont know what else to do
Click to expand...
Click to collapse
Where did you get the drivers (they should ahve been downloaded right from the samsung site)? Also what USB mode to you have your Phone in? I beleive for direct connection it has to be in Mass Storage mode. I didnt have any issues when I installed Kies onto my XP Machine and the phone was recognized right away.

[Q] HELP! Softbrick, Windows is not recognizing my phone

Hello, I believe I screwed up something with the mounting/unmounting before I flashed a ROM, and my phone is not working as a result. Originally, it would sit at the Samsung Sidekick 4g Tmobile screen forever, and I could use the button combination to get it into download mode... now that doesn't work, and it only goes to the black screen with the phone and the computer.
I have downloaded driver after driver after driver trying to get this to work, I have downloaded ODIN, and I understand how to use it, but there is no way ODIN is going to see my phone because Windows will not properly install it. I only have a PPC mac and Win 7 computers, one win 7 computer says device is malfunctioning and the other win 7 computer loads it as a "Gadget Serial" but says that it did not install properly. I have tried all the samsung drivers, all the samsung programs to no avail. I've tried more than one USB cable too...
Is there any hope in getting this phone back to life? Do I need to use a windows XP installation? I have VMware so I could try XP or linux but frankly I'm afraid to do anything more for fear of further complicating this situation.
Final Edit: SOLVED. I uninstalled everything save for the samsung drivers, installed the android SDK and plugged it in a different usb port...although im not sure if windows got it right away, ODIN detected it and I was able to restore.

[Q] device not recognized over USB

I've been trying to connect my Trasformer to my computer over USB for a while now so that I can use Nachoroot. When I plug it in, a bubble pops up on my PC on the bottom right saying "USB device not recognized". If i go into the device manager and click update driver and have it look in the folder with the USB drivers from Asus's website, it says that i already have the most up to date drivers. I've tried uninstalling the device, installing the package with Sync and web storage, but get the same result.
I have tried using a different cable, a different computer, and a different operating system (specifically windows 7, windows 8, and ubuntu). I've also restored my Transformer using the option in Settings.
Anybody have any ideas as to what will work?
Have you install Asus PC sync?
If you haven't you should
yes, i've installed sync.
Take a look at this thread, especially the "trouble shooting" portion
http://forum.xda-developers.com/showthread.php?p=13635629
I had looked at that thread before and have tried all of those steps, and tried them again, but no luck.
One note being that with the other drivers from the hotfile download on that thread, i'm unable to install them. In the device manager on my computer, when I plug the computer in it shows up as an unrecognized device, and when I try to use those drivers it says that they don't apply.
I am having the same problem. I was rooted on the 3.2.1 system with a US version BAO transformer TF101-A1 and the computer was able to use the drivers. However, I could not upgrade and was having issues unrooting, so I did a factory reset then upgraded OTA 3 different times until I got to the ICS 4.0.3 (which runs fine, just unrooted!). Now I cannot get the transformer drivers to install! I get the "USB Device Not Recognized" error and in the device manager it shows up as an Unknown Device under Universal Serial Bus Controllers. I try to update the drivers using Asus drivers, Vipormod drivers, and the drivers I used to originally root it which was Brks_rootkit_v7, but it won't accept them. This is without Asus Sync installed and trying on four different computers using Windows 7 64 bit and two different cables. I even tried loading the Asus Sync and it will not find the device. When I try to boot into stock recovery, I just get an Android that falls over with a red exclamation point. Also to note, my wife has a transformer still on 3.2.1 and rooted and it recognizes it immediately on all four computers using either cable. I have been everywhere searching for an answer (including this site) and tried just about everything. I just submitted a service claim email to Asus telling them that after the update I am unable to use Asus Sync and the drivers aren't recognized. I am extremely frustrated! Any help will be appreciated.
http://forum.xda-developers.com/showthread.php?t=1468832
and
http://forum.xda-developers.com/showthread.php?t=1476886
These also seem to be a similiar problem and as yet a solution has not been found.
Thank you for your quick reply. I will head over there.
Just to clarify, I can download the appropriate file, flash that file (using cwm) and then it will boot up in ICS or do I need to update to ICS after that?
Thanks,

[Q] NEED: drivers for tethering windows phone 7.5 in windows 8

NEED: drivers for tethering windows phone 7.5 in windows 8
hi, i was happily tethering my t-mobile dell venue pro with my windows 7 computer. i recently upgraded to windows 8, and noticed i can no longer tether. i tried installing the windows 7 - htc usb drivers as well as qualcomm, neither installed at all.
any one have any ideas and could maybe link me to the right place if it was posted already how to do this? i have searched for a few hours already and have come up with nothing.
if someone knows how to get this running please please do share and feel free to write a tutorial as well. i am sure many people would benefit from it.
As always Thanks in advance!
W hile ago, I couldn't get my Windows 7 PC to recognize the original drivers as compatible with the USB modem, so I modded the drivers to recognize it... and it has worked fantastically. Hopefully this will work for you too.
Hello,
Did you try compatibility mode Windows 7 ?
thesecondsfade said:
W hile ago, I couldn't get my Windows 7 PC to recognize the original drivers as compatible with the USB modem, so I modded the drivers to recognize it... and it has worked fantastically. Hopefully this will work for you too.
Click to expand...
Click to collapse
thanks for that but i have had the same problem with these drivers, as with the stock drivers. the error says
"windows was unable to install your unknown device"
"windows could not find driver software for your device"

[Q] Bricked? Help please!

Ok so I have an ATT LG G2 (d800) I have CWM touch recovery and yesterday I flashed the latest cm11 update 2-21. After that my phone never got past the CM loading screen.It would load for hours. I tried wiping from recovery and I ended up deleting everything, now all I get is my LG screen. I have no zips on the phone that I can flash. I am still able to get into recovery and into download mode, since I have CWM I think that means I can't flash from an OTG. I know I can push files through adb which I already have setup, however no computer I connect my phone to can see it. It shows up in device manager as Unknown USB Device (Device Descriptor Request Failed). I have downloaded the google adb drivers, the koush drivers, the unnaked drivers, the lg drivers, NOTHING WORKS. On 64 bit computers it tells me make sure the driver is support for 64bit systems, I try the same exact driver on a win 7 32 bit and it tells me to make sure it is for 32 bit computers. I have opened up the phone and left the battery unplugged for 2 hours, that didn't help. I've actually read that people clean the inside of their usb port on the phone and that fixes that, I'm desperate and tried it, did nothing. I have tried on my windows 8.1 x64 (yes i tried disabling signature veri), windows 7 32 bit, and a virtual windows xp 32 bit.
Windows 8.1 doesn't support many devices in fastboot or recovery mode. I had to switch my computer to windows 8 just to use fastboot on an xperia play.
Using a virtual windows xp wouldn't work either. Cuz the device has to be recognized by your main OS first. And after your main OS recognizes the device it will connect it to the virtual machine.
So stick to your Windows 7 for now. Make sure again that you're correctly installing the 32 bit drivers and then try pushing zip files into your phone through adb
As long as your phone can boot into recovery or download mode then it's fixable so don't worry about that.
Sent from my One X+ using XDA Premium 4 mobile app

Categories

Resources