Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
malybru said:
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
Click to expand...
Click to collapse
I'm still on stock tmobile us rom, I just came from arhd with no luck so I restored my phone to factory stock then s off and rooted.
Sent from my HTC Sensation 4G using xda premium
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
02CWRX said:
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
Click to expand...
Click to collapse
Yeah I did tried 3 of the most recent arhd Rom, it is smooth and fast but has too many glitches on my phone. I tried installing the recommended radio it does fixed my signal issue, but after 3 days of using my phone keeps goin on a black screen when somebody calls me or text me so I decided to revert to stock
Sent from my HTC Sensation 4G using xda premium
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I haven't tried restoring to 1.2ghz , I just restored my phone back to stock I got tired of trying all the versions and seems all of the versions I flashed had issues on my phone, don't get me wrong but I do love the speed and smoothness of arhd its just those fcs, unstable signal and not to mention the black screen issue. But like you said I haven't tried using different kernel I just used the one that came with the Rom and the other faux kernel that one of xda member suggested the beta 10. I even tried the insertcoin 3.3.9 and same issue with signal. I'm on tmobile carrier I don't know if that causes the signal issue with most of the Rom I flashed.
Sent from my HTC Sensation 4G using xda premium
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
02CWRX said:
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
Click to expand...
Click to collapse
What arhd version you using and kerne so maybe I can try and use itl? I believe mike suggested to.flash it with the radio 10.58 which I did and it made my signal stable but few fcs and blackscreen so I reverted back to stock.
Sent from my HTC Sensation 4G using xda premium
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I'll give 3.6.2 a try and the kernel you said and hope it works good now. Thanks. Let me know if the 3.6.4 works flawless. Thanks
Sent from my HTC Sensation 4G using xda premium
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Thanks so much, you've been so helpful with me and I do appreciate it.
Sent from my HTC Sensation 4G using xda premium
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
malybru said:
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
Click to expand...
Click to collapse
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
malybru said:
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
Click to expand...
Click to collapse
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
So,what combination of ROM and radio was the best for signal?
And with your current set-up,do you ALWAYS have bad signals?
Or does it vary from area to area?
So after flashing 3.32 firmware my phone seems to be running fine. No bootloop no hang, but after i install a custom rom, when I hit the power button to lock the device it freezes. It wont come back on and I have to do a battery pull to get it working again. I have tried this on Virtuous rom, Vorbeths AOSP ICS rom, Mikes stock rom from the Sensation, as well as Hypersensation sensless rom. Is it due to the fact that my phone doesnt go well with this firmware? What should I do?
There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA
Raven2k said:
There might be a problem with the kernel cpu settings, perhaps too under volted or too slow clock during screen off.
Try mike's ARHD with Stock Kernel after superwipe.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
Will try that. Ive been on stock gb and I don't like it
I want to run a AOSP rom to be truly stock can anyone recommend a kernel to fix this problem?
Bricked 3.0 and SebastianFM are both very good, check speed in SetCPU or Android Overclock or similar.
Best AOSP ROM depends on what you like, but IMO it's gotta be OpenSensation CM9.
It's weird how I was running the March release of open sensation and then when I upgraded to the aprik release it stopped working for me
Sent from my HTC Sensation 4G using XDA
Hi All,
I need your suggestion which best Kernel for ROM Vipers 1.6.3 except the default Kernel (Bricked)?
Currently I use the default kernel, but the wifi looks unstable (diconnected somestimes).
What I need are:
Stable and good performance kernel for daily purpose (no game used)
Better battery life
Previously I tried Sultan r17.5 but my HH has immediate reboot while got incoming call
HH: HTC Sensation XE
ROM: Vipers 1.6.3
HBOOT: 1.29.0000
Radio: 11.24A.3504.31_M
Locked Bootloader
S-OFF
You might want to change your setup. I've seen better performance compared to bricked with worthy battery trade-off.
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app
try sebastianfm's kernel or pyd-x kernel
rzr86 said:
try sebastianfm's kernel or pyd-x kernel
Click to expand...
Click to collapse
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
imthatkiid said:
I'm not disagreeing with you, but I was reading in the forums because I have 1.6.3 since their newer version, 3.0 or something doesn't have the camera, so it's a big turn off for me until that's fixed. But they said something about flashing another kernal over could brick the device for their ROM... or ruin it for that matter. I've been in bootloops and stuff before, so I'm curious... maybe that's just for their new version? I always stick with the default kernal because I'm still learning what half the stuff is. But if you can flash a kernal to 1.6.3 then I might give it a shot.
Click to expand...
Click to collapse
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebastianfm or pyd-x kernel by axetilen or other kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Sultan Kernel
Sent from my HTC Sensation Z710e using xda app-developers app
rzr86 said:
don't listen to that post
of course you can't flash a kernel from droid dna to sensation and surely you will damage the device
it was only a joke.nothing else
in vipers 3.0.1 you can only use pyramid ION kernel by sebastianFM
in vipers 1.6.3 you can use overclocked kernel 1.5.2 by sebasstian fm or pyd-x kernel by axetilen or others kernels
edit:if you are S-ON use 4ext to flash kernel and before flashing enable smartflash
and a nandroid backup just in case before anything
Click to expand...
Click to collapse
ahh okay, I see. Sorry I misread the original post, but thank you for the info.
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
u have the one which come with the rom u can find it in a folder in your sd called venom (after u flashed the rom of course)
or u can try Sultan kernel ... i am usingvit now it is pritty amazing
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
My phone is getting very buggy with Vipers 1.6.3 and I don't know why. I tried wiping caches but after 1 day it returns in a buggy state. Very slow to open apps and to switch from one to another. Maybe is a kernel problem? I'm using default (Bricked)
padre629 said:
Since I've flashed Vipers 1.6.3 the developers suggest me that use the Sultan Kernel... Daily the rom seems to be good, stable and smooth ..... except in wifi (sometimes) and with tethering/mobile hotspot (the phone or disconnect automatically the hotspot OR the phone reboots every 10-20 minutes)
With a reflash I gonna see if these problems get out!
Sultan Kernel RULES!!
Click to expand...
Click to collapse
I have tried flash Sultan r17.5 but my phone got reboot while got incoming call.
Also tried to flash SebastianFM 1.5.2 but this kernel has no S2W
Try faux kernel. Its my favorite sense kernel.
Sent from my HTC Sensation using xda premium
I got reboots during phone call on sultan r17.5 (happens rarely but was unable to capture the last_kmsg) and on faux kernel (more frequent here)
I found sebs kernel is the most stablest of all but I'm a die hard fan of s2w (can't live without it)
And finally there is a kernel with sebs sources and s2w along with minimalistic changes.. It's the Grogg kernel 3.0
He recently opened a thread for it.. Do check it
Sent from my Nexus 7 using xda premium
I use faux and never had any problems. It's gives the best performance. Sultan kernel is good though it gives some glitches. Using faux 12u
Sent from my HTC Sensation Z710e using xda app-developers app
I have noticed that with ViperS 1.6.3 you can get reboots on incoming calls when you use "auto brightness" or the "AOSP lock screen".
So try disabling them, wipe cache/dalkiv and see if the problem goes away (it did in my case).