Database Info

Htc s710,help needed

Hey guys,Yesterday i wanted to update my rom.I have windows mobile 6.1.Apperently with the new rom it makes it faster.I unlocked my device and tried loading the softawre on.Everytime i try loading it ,the computer says it lost the connection with the pc.Today i tried using my phone and when i switch my phone on ,the phone does not respond and the screen has three colour(blue,red etc).How do i get into my phone or reset it so that i can use my existing rom and windows?e-mail me anytime

You're stuck in Bootloader
Hi
Your phone is stuck in Bootloader Mode. You may find that by removing the battery and re-inserting it you will get to a position of loading Windows Mobile. The Bootloader is the software on the phone that is used to install a new operating system. If you search for "Stuck" and "Bootloader" on the forum or the section of your device you will probably come up with some threads about this problem.
The worst case scenario is that the "flash" of the new operating system has gone wrong so the Windows Mobile operating system can not load. If this is the case, the phone will automatically revert to the Bootloader as it can't "see" any system installed. Think of a PC reverting to the BIOS and giving you the message "Operating System Not Found" if you remove or disconnect the hard drive.
If you can't boot simply be doing a soft reset using the stylus in the hole you need to successfully flash a new Operating System or ROM. Check out the Encyclopedia at the bottom of the main forum page if you don't understand any of the words I've used here. If you can be more specific about your device and the ROM you tried to flash others may be able to help.
Cheers
andrew-in-woking

Help
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!

XZ5J4H said:
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!
Click to expand...
Click to collapse
Welcome to the forum
Please READ the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Vox
Over there you´ll dind a way to flash your device
Good luck,

Stuck windows
Hi,I managed to load mono lisa windows 6.1 on my phone.I did this by justing loading utility update file.Followed all the intructions.After the rebooted it just goto stuck.I tried taking the batery out and inserting it back in the phone after 10 seconds.The problem is when i start my phone it gets stuck and the everything in unresponsive.Help me please!!1

Hard Reset or Reflash
Hi
After flashing a ROM you always need to perform a manual Hard Reset. Read the Wiki page on your device for info on how to do this. If that doesn't help then you may have a bad flash. If this is the case then flash the ROM again but as soon as it's done perform a manual hard reset.
If you still can't get it working flash an official operators or HTC ROM to your device.
G'luck!
andrew-in-woking

Rom Wanted
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3

XZ5J4H said:
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3
Click to expand...
Click to collapse
Enter to Vox forum and READ a little about all ROM´s there.
The best way is to test severals till you get the one fits your personal needs
Good luck,

L with cm11 - help

Hi, masters of Android I wanna ask U for help
I have problem with instal CM 11 (cm-11-20140710-UNOFFICIAL-taoshan)
I'm completely new in flashing rooting etc, so plz dont flame me for don't use "search" option. I ryly try do it on my own but Android as a head of me and I dont wanna brick my phone ;/
Atm i have root on my L, have copy TA keys. Also have key to unlock bootloader.
And with unlock i have problem ;/ I start FlashTool, push BLU tun of phone, next tun it on with vol+ button, i see blue diode and nothing happend next ;/ i know it should appear in Flash Tool on PC window to put key to unlock but it dont appear ;/ Im stuck ;/
And ofc I would be grateful for Yours help, and for clue what to do next in order to safely complete the installation of CM 11.
My current soft - 15.3.A1.17
sry for bad eng

connect with vol- button

[Completed] [Q] Black Screen of Death

Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:

PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .

Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!

Thank you. Thread closed.

[Completed] sony xperia sp bricked and need help im at a lost end :(

Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris

chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread

chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.

unable to unlock the phone

Hi,
the device had bad MIUI upgrade and there is no MIUI available on the phone . I tried to download new ROM and got "Flash xbl error" whick apears to be there since the device is locked .
trying to unlock the device I get the message "please add your account in MIUI's Settings > Developer options > Mi unlock status"
The problem is that I cant go to MIUI settting since there is no valid ROM on device, what can I do?
Thanks,
Erez

Bro try doing with test point method. You can watch videos from youtube to do that. You have to take off the back panel and then short two pins with usb attached to your PC and press the power button at the same time