Hello everybody,
I own a HTC Tatto, I'm trying to update the system to Andorid 2.3 Gingerbread and I have a problem with recovery I cannot solve.
I'm following the instructions of site wiki cyanogenmod
(I put the text below, I can't make a link on the page on this first mine message!!)
I've rooted the phone succesfully, installed clockworkmod recovery of different relases (3.*, 5.*) both from adb and ROM manager, but when I try to flash CyanogenMod I coulden't.
I have only 4 voices on the recovery menu :
- recovery
- apply update.zip
- wipe data/factory reset
- wipe cache partition
I tried to use apply update.zip, but it gives me an error of no signature problem.
Following the guide I wanted to do the steps :
Install zip from sdcard.
Select Choose zip from sdcard. But I DON'T HAVE THEM ON THE MENU!!!
Please help, I'm going mad about this!
Thanks in advance,
Paolo F.C.
S-OFF
1.
I used the official RUU for Jewel SENSE50 4.13.651.4
(everything installs correctly and works)
2.
I used fastboot to flash twrp 2.8.6.4 (also tried 2.8.6.0 )
per - android.cmphys.c o m/twrp-jewel
Fastboot says success.
3.
I boot into recovery.
Perform a Factory reset
( No errors present and completes Successful)
4.
Install Pac Jewel Rom 20150515-044902.zip
It says successful, but it presents this line :
( detected filesystem ext 4 for /dev/block/platform/msm_sdcc.1/by-name/system )
5.
I install gapss for android 5.0 20150222-signed.zip
6.
Reboot and it hangs after installing all apps ( starting apps)
I've tried to mount /system in recovery and then wipe it. I've also tried to wipe it when it wasn't mounted.
I'm sure i've got all the drivers I need. I can use adb to open shell and browse the filesystem. Fastboot also is able to do most commands. Wouldn't allow a fastboot format system.
Any pointers would be appreciated. Thank you for your time.
You can close this sorry. I used a different gapp package and it no longer hung on starting apps.
I suggest stock C2305_b.2.16_Europe firmware to be installed through the custom recovery (CWM or TWRP) .
It odexed , non-rooted .
How to install:
- Download firmware to SD-card
- Go into recovery and make a backup .
- Do wipe data (factory reset) , cache, dalvik cache
- Install firmware C2305_b.2.16_Europe
- reboot
DOWNLOAD
I am from india Gujarat....can I flash this stock rom with vmw or not?
script aborted (no error message ) E: error in /sdcard/..............
(status 7 )
installation aborted
OP request
THREAD CLOSED
Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!
My new Xiaomi Poco X3 Pro is showing an error screen after some time, like in this post:
https://forum.xda-developers.com/t/cant-load-android-system-lineageos.4314035/
It reads "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device"
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
After the first error screen
- I tapped Try again,
- When the error occurred again, I tapped "Factory data reset," but the error still occurred. The phone is new, no user data is on the phone.
- I booted into recovery and reset all the data I could. When I tap "Format system partition" it throws an error "E: Failed to open /dev/block/dm-0: No such file or directory. System wipe failed."
- Then I repeated the adb sideload. The error occurs again.
- I removed the SIM card, as someone in the forum suggested this could be a problem source. The error still occurs.
What can I do now?
----
Update [2021-12-05 Sun 20:09]
It seems to be a Problem with the GApps Version.
What I did Try so far is:
- Install 03-12-LOS and latest GApps via LOS recovery (didn't work)
- Install 03-12-LOS and latest GApps via TWRP recovery (didn't work)
- install LOS Build from 26-11-2021 without GApps (works)
- Install LOS Build from 26-11-2021 with latest GApps (didn't work)
- Install LOS Build form 26-11-2021 with GApps from 25-11-2021 (works)
Just use TWRP, flash ROM and AFTER flashing ROM Format Data where you have to type "yes". (Format, not Wipe)
Xiaomi Poco X3 Pro
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Thanks for the Idea. At the moment it has not solved the problem.
This is what I did:
- Flash TWRP
Code:
fastboot flash recovery TWRP-3.5.2-vayu-Nebrassy-2.img
- copy lineage-18.1-20211203-nightly-vayu-signed.zip and "open_gapps-arm64-11.0-nano-20211204.zip" to the Poco device
- install via "install" option, wipe cache at the end of installation
- Format files (via "Wipe" -> "Format Data" -> type "yes")
- Reboot
After some time of the animated Lineage OS logo, the phone reboots into TWRP.
To me this seems very similar to the Lineage recovery before.
Any ideas what could be wrong?
You probably wiped System or Vendor partition or something, you are not supposed to do that.
Most likely you have to reflash MIUI now first. Make sure it's atleast version 12.5.X.X.
Flashing instructions are really simple, this apply to all ROM's.
FIRST INSTALL?:
Remove any fingerprint, PIN, or password in MIUI
Unlock the bootloader
Transfer ROM to internal storage
Install any suitable recovery
Flash ROM zip file
Do a data wipe in recovery (format data)
Reboot to the system, wait and enjoy
FLASHING UPDATES?:
Download via OTA Updater and let it automatically install; OR
Download an update, transfer to internal/external storage (always check file sha256)
Flash ROM zip and reboot.
Do not wipe anything else or add any additional steps. (maybe except Gapps if ROM doesn't have them included)
ps.
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
Click to expand...
Click to collapse
k3lcior said:
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
Click to expand...
Click to collapse
I followed the LOS Install Guide: https://wiki.lineageos.org/devices/vayu/install But this procedure does not seem to bee the cause (see below).
Download the LineageOS installation package that you would like to install or build the package yourself.
Optionally, download an application package add-on such as Google Apps (use the arm64 architecture).
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. When Xiaomi/POCO/Redmi splash appears, release Power and keep pressed Volume Up until recovery appears.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu.
Sideload the LineageOS .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Click to expand...
Click to collapse
Okay so this is what I did (the part that works):
- I downloaded the latest possible stock ROM from https://www.xda-developers.com/down...ut-several-xiaomi-redmi-mi-poco-devices/#vayu The fastboot ROM is more than 5GB.
- Extract the file "vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea_05cc38de43.tgz"
- then connect the phone via USB cable in fastboot mode and:
Bash:
cd ~/Downloads/vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea
/bin/bash ./flash_all.sh
- The default MIUI starts flawless, as it dit the first time I turned on the phone. So far so good.
What didn't work:
1. I installed the LOS Recovery again and flashed the OS and Gapps. Only after that I did step 3 - formating. The result ist the same bootloop as in the beginning.
2. I flashed the stock MIUI ROM again (which woks fine). Then I flashed TWRP, transfered the OS and GApps file and installed. I did not wipe anything, just used "format data" like above.
In both cases the OS does not start. After a while displaying the LOS-logo the phone reboots to recovery.
What did work:
I downloaded lineage-18.1-20211126-nightly-vayu-signed.zip, one version before the latest verion and the corresponding recovery lineage-18.1-20211126-recovery-vayu.img
I flashed only the OS, and no GApps -- and it launched successfully. Installing with the latest GApps failed again.
Install older gapp, not all gapp is compatible