Related
Greetings,
I just bought and legally unlocked a Motorola Defy from Spain, and the carrier was Vodafone.
Checking the ROM in it, it says the following:
System version:
Blur_Version.2.51.1.MB525VF360Blur.Vodafone.en.ES
While the build number says:
JRDNEM_U3_2.51.1
So it's a 2.51.
What exactly does this mean?
I've searched the forum up and down and I still don't quite get it.
The only info I got was:
walter79 said:
!!!!!!!!! Flash only if you come from a 2.21 or 2.34 rom "That is because it has version 2 for CG31 and CG39, if you are on stock 2.51 those versions are 3 and if you flashed leaked froyo those are 4 and you cannot flash any firmware with lower versions. if you are on 2.21 or 2.34 you can flash this, otherwise you will brick your phone. !!!!!!!!!!!!!!!
Click to expand...
Click to collapse
And I don't understand what this means. What's version 2 and 3? What's CG31 and CG39?
There's no official 2.2 Froyo update for my phone, and AFAIK there's no news saying when that may happen.
I don't want Blur (I want to be able to use stock Android widgets), and I don't want the Vodafone or any other operator's stuff.
I know there's no stock ROM without those things so I'll have to do with a modded ROM (I'm very compelled to getting this one).
I'd also like to have the oportunity to reflash the phone to its stock ROM, in case I need to send it to warranty.
I flashed my girlfriend's Milestone with the latest UK official ROM through RSD Lite (after the phone bricked when I used the official update procedure!), and it was a rather simple procedure.
So given that I have one of those "bad" 2.51 ROMs, what additional procedures do I need to make, besides the sbf flashing through RSD Lite?
don't worry mate.. i have 2.51 too.
where to start it..
um.. maybe this.
CMIIW.
SBF is just like RAR and ZIP, it is packaging file.
inside SBF there many files, two of those are CG31.SMG & CG39.SMG.
some newer release SBF (froyo) might have EARLIER "version" of CG31.SMG and CG39.SMG
than CG31.SMG and CG39.SMG on your phone (2.51).
which mean it can't be done to flash it (flash to earlier version).
as long as you not flashing CG31.SMG and CG39.SMG when you apply froyo (leaked or official) update. it's fine..
i think someone here (fritolays) found method to FIX the SBF to exclude CG31.SMG and CG39.SMG. name of that SBF is FIXED SBF.
so if you want to upgrade to froyo, do not flash FULL SBF.
but use clockwork recovery to wipe data and wipe cache, then apply the nandroid backup, then flash the FIXED SBF using RSD Lite 4.9.
----------------------------------------
my advice before you doing anything,
do a factory reset, get root, install custom recovery,
then just create a nandroid backup of your stock 2.51 with custom recovery,
and make sure you have a FULL SBF of 2.51 of your region, and you have FIXED SBF 2.51 of your region.
so if you want to go back to eclair stock:
-install custom recovery, go to custom recovery, wipe data and wipe cache,
-apply restore nandroid backup of your stock
-flash the FIXED SBF 2.51 of your region.
-----------------------------------------
Ok, I now have a nice brick, for the moment.
After rooting, installing the clockwork mod and backing up my original ROM, I flashed a "fixed" SBF from the 3.4.3-11 version.
After the flash, the phone just hangs in the motorola symbol on and off (by about 2 minutes).
I tried both this SBF:
http://forum.xda-developers.com/showpost.php?p=12596803&postcount=845
and this one:
http://forum.xda-developers.com/showpost.php?p=12357943&postcount=62
Both give me the same result: Motorola logo on and off, and no boot.
The bootloader is still accessible.
RSD Lite says to power up the phone manually, but it does so by itself.
Is there some hidden ritual that I don't know of? (like unplugging the USB at a certain time or pressing some buttons?)
Any suggestions?
I've seen this one:
http://forum.xda-developers.com/showpost.php?p=12620475&postcount=7
But I don't even know if it's a fixed ROM or not.. should I try it?
Tried the following ROM with the same result:
3.4.2_155-Fixed.CEE_DEBLUR.sbf
I'm starting to get a bit preocupied here.
Help?
Try restoring a nandroid backup first, then right when you reboot go into stock recovery and flash the fixed sbf for that nandroid backup you installed and it should work fine. It sounds like you may have flashed a fixed sbf before you installed a nandroid backup. Hope this helps.
Sent from my MB525 using XDA App
Dewman4life said:
Try restoring a nandroid backup first, then right when you reboot go into stock recovery and flash the fixed sbf for that nandroid backup you installed and it should work fine. It sounds like you may have flashed a fixed sbf before you installed a nandroid backup. Hope this helps.
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
How can I restore the nandroid I did previously?
The clockwork restore boot has been uninstalled, and the restore boot I have right now only has "wipe data", "wipe cache" and "apply update.zip"..
As far I know, you can't enter custom recovery from a boot loop. I don't know if this is correct, but the only way i see to you is flash the full SBF of your stock rom, that you can find here:
http://forum.xda-developers.com/showthread.php?t=966537
Tons of JRDNEM_U3_2.51.1, choose that best fits your phone and go. Next time, BEFORE flashing the fixed SBF, restore nandroid.
ToTTenTranz said:
Ok, I now have a nice brick, for the moment.
After rooting, installing the clockwork mod and backing up my original ROM, I flashed a "fixed" SBF from the 3.4.3-11 version.
After the flash, the phone just hangs in the motorola symbol on and off (by about 2 minutes).
I tried both this SBF:
http://forum.xda-developers.com/showpost.php?p=12596803&postcount=845
and this one:
http://forum.xda-developers.com/showpost.php?p=12357943&postcount=62
Both give me the same result: Motorola logo on and off, and no boot.
The bootloader is still accessible.
RSD Lite says to power up the phone manually, but it does so by itself.
Is there some hidden ritual that I don't know of? (like unplugging the USB at a certain time or pressing some buttons?)
Any suggestions?
I've seen this one:
http://forum.xda-developers.com/showpost.php?p=12620475&postcount=7
But I don't even know if it's a fixed ROM or not.. should I try it?
Click to expand...
Click to collapse
oh damn..
you just bricked your phone right...
the steps are wrong... the steps are:
root>install custom recovery>apply nandroid backup of froyo>reboot but immediately go to bootloader>flash fixed sbf of froyo.
you have to restore nandroid backup of froyo 3.4.3-11 first before you flash the fixed SBF of 3.4.3-11.
from your explanation,
you create backup of your 2.51 then flash the fixed sbf of 3.4.3-11?
if it is true, the ROM is still eclair 2.51 and you install the 3.4.3-11 firmware,
i think that's the problem.
you should restore nandroid backup of froyo 3.4.3-11 first before you flash the fixed sbf of 3.4.3-11.
after that, you follow what pays thread says to do to install his rom.
just because your defy cannot be started,
what you can do now is just flash your phone back to eclair 2.51 first with full SBF, not fixed.
the condition now is you have FIXED firmware of 3.4.3-11, but with 2.51 ROM inside.
just because it is fixed, you still have a chance going back to eclair 2.51
search Full SBF Eclair 2.51 of your region, and flash it with RSD Lite.
hope and make sure your battery is full enough to flash the full SBF, maybe 60-80% is enough.
because with that condition, i think the battery is not charging, even you charge it.
after everything is back to normal (eclair 2.51)
then if you still want to use pays, follow this method
-root
-install custom recovery, reboot to custom recovery
-restore nandroid backup of froyo 3.4.3-11 (if you can't find it pm me)
-immediately flash fixed sbf of froyo 3.4.3-11
-now your phone should froyo 3.4.3-11
-install pays rom with custom recovery
I flashed this sbf and I now have a working phone with a 3.4.2-155 firmware. Phew...
So I should have "restored the nandroid backup of 3.4.3-11" while still having the 2.51 firmware and only then I should have flashed the fixed firmware?
Sorry, this is really confusing for me.
With this 3.4.2-155 firmware, can I still do that procedure to get the pays rom?
ToTTenTranz said:
I flashed this sbf and I now have a working phone with a 3.4.2-155 firmware. Phew...
With this 3.4.2-155 firmware, can I still do that procedure to get the pays rom?
Click to expand...
Click to collapse
oh no...
you flash the FULL SBF of 3.4.2-155??
you should flash FULL SBF of 2.51...
i think you lost your downgradeability now...
but you still can use pays,
just follow like pays thread says.
just because you lost your downgradeability,
you shouldn't even care to flash the full SBF 3.4.3-11 now..
(you don't have to use any nandroid backup now to upgrade to newer build)
ToTTenTranz said:
So I should have "restored the nandroid backup of 3.4.3-11" while still having the 2.51 firmware and only then I should have flashed the fixed firmware?
Sorry, this is really confusing for me.
Click to expand...
Click to collapse
yea, you should do that...
while still having 2.51 firmware,
you should restore the nandroid backup of 3.4.3-11 first,
and then you flash the fixed sbf of 3.4.3-11.
Now you are +1 that can't go back to 2.1 \o/ (like me kkkk)
If you have flashed the full SBF from 2.51.1 you could still have a chance.
And yes, you can go to any ROM that is 2.2 now, test Pays, LiquidArc and BluelessGinger from JBoogie3 and Barebones from Fritolays(my favourite). Don't worry about nandroid backups anymore, just do the full SBF when you install a new ROM (it's what I do).
But as soon as the Spanish Vodafone release a Froyo ROM, I should be able to flash to that and still get the warranty if I need to, right?
Truth be told, I would never want to go back to 2.1, except for warranty procedures.
The problem is that, only if you can find a SBF from Vodafone ES you will have your warranty. And this is just a possibility, since this SBF was not released yet. Good luck for you (and for me, since I'm in the same situation, heheheh)
ToTTenTranz said:
But as soon as the Spanish Vodafone release a Froyo ROM, I should be able to flash to that and still get the warranty if I need to, right?
Truth be told, I would never want to go back to 2.1, except for warranty procedures.
Click to expand...
Click to collapse
as long as the official spanish vodafone SBF have the latest version of CG31.SMG and CG39.SMG inside (newer than CG31.SMG and CG39.SMG inside 3.4.3-11), it should be fine..
otherwise there's workaround though.
if just in case the CG31 and CG39 are in lower version,
you should restore nandroid of official froyo spanish (when it released)
then you flash the fixed sbf of that release.
i am sorry for your lost...
but you can still go back to 2.51 though..
but not in proper "real eclair 2.51"
i will post this method if you ask.
Helps to read all the threads on the process as there are many. Now the problem lies your on froyo and can't get back to eclair if you need to send it in for repair. The main thing tho is your back up and running.
Sent from my MB525 using XDA App
Well i was trying to flash SC v7 and was following the steps as directed, Installed Bootmenu Manager and downloaded the bootmenu files and gave me error about logwrapper.sh and i ignored it and selected custom recovery mode. Since then am stuck in bootanimation and it wont go beyond boot animation so is there a possible Soln?
And when i try to reflash the stock ICS i get an errorassert failed apply patch check("system/app/AABSync.apk". and so on so installation aborted
Is there a fix for Getting back to stock ICS..
THX in advance..
kc92iyngr said:
Well i was trying to flash SC v7 and was following the steps as directed, Installed Bootmenu Manager and downloaded the bootmenu files and gave me error about logwrapper.sh and i ignored it and selected custom recovery mode. Since then am stuck in bootanimation and it wont go beyond boot animation so is there a possible Soln?
And when i try to reflash the stock ICS i get an errorassert failed apply patch check("system/app/AABSync.apk". and so on so installation aborted
Is there a fix for Getting back to stock ICS..
THX in advance..
Click to expand...
Click to collapse
You have to use the patched fxz. You will have to use the proper fxz and patch it with the pieces from the Chinese forum that posted here a week or so ago... that is what I used to make the US AT&T version script that I posted. You can't use the ICS OTA as a backup.. it is a patch for 2.3.6 ONLY.
This one:
http://forum.xda-developers.com/showthread.php?t=1799702
This is just a patch that you apply over YOUR proper 2.3.5 fxz.
Well am now on 2.3.6..
THX again.
kc92iyngr said:
Well am now on 2.3.6..
THX again.
Click to expand...
Click to collapse
How can you be at 2.3.6 and flash scv7? that is ONLY for people on ICS?
Just go to the noob thread and follow the fxz instructions for 2.3.6.
NO i was on 4.0.4 and by the time i replied i had fxz back to 2.3.5 and ota to 2.3.6..
While flashing with odin (stock rom) , it was stuck in the middle ..Waited for longtime no progress so took off and retried flashing nothing happened..
If i go to cwd mode(volume+up) it says me "encountered problem while updating firmwire, use kies to do recovery"
Now what can be done?...Please help...Is it totally bricked ?,any other options can i try./?
just boot in download mode (VOL DOWN + HOME + POWER) and flash FW again it will be resolved just with that.
roonie said:
While flashing with odin (stock rom) , it was stuck in the middle ..Waited for longtime no progress so took off and retried flashing nothing happened..
If i go to cwd mode(volume+up) it says me "encountered problem while updating firmwire, use kies to do recovery"
Now what can be done?...Please help...Is it totally bricked ?,any other options can i try./?
Click to expand...
Click to collapse
Flash stock ROM again using ODIN by going to Download mode as said by xlm13x ...
Download the china stock ROM, it has all the three files the pda, modem and the csc. It also has the pit file. Flash on ODIN.
Once you do this your phone will definately boot up. Once this is done you can flash any country stock rom through ODIN.
It also happened to me once and the thing i just mentioned worked for me. So 100% sure on this.
Sent from my GT-I9103 using xda app-developers app
its really good to see people helping each other so fast
sandyisgood said:
Download the china stock ROM, it has all the three files the pda, modem and the csc. It also has the pit file. Flash on ODIN.
Once you do this your phone will definately boot up. Once this is done you can flash any country stock rom through ODIN.
It also happened to me once and the thing i just mentioned worked for me. So 100% sure on this.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Post the link for that.
Sent from my GT-I9103 using xda premium
Thanks a lot guys that was a fast helping hand it worked after 3-4 tries..
One more thing I have Baseband version-I9103DDKH4
Kernel Verssion - [email protected]
Build number:GINGERBREAD.XWKI5
this is the stock version i flashed now...
Can now i flash neo romv3 from this link
http://forum.xda-developers.com/showthread.php?t=1769863
It denotes XWLA4 2.3.6 ...is it region specific?...can i flash with my version is it compatible?..
roonie said:
Thanks a lot guys that was a fast helping hand it worked after 3-4 tries..
One more thing I have Baseband version-I9103DDKH4
Kernel Verssion - [email protected]
Build number:GINGERBREAD.XWKI5
this is the stock version i flashed now...
Can now i flash neo romv3 from this link
http://forum.xda-developers.com/showthread.php?t=1769863
It denotes XWLA4 2.3.6 ...is it region specific?...can i flash with my version is it compatible?..
Click to expand...
Click to collapse
The kernel version you quoted contains 'XWKI5' which is the code for Indian stock firmware.
For using Neo ROM you'll have to flash the XWLA (European stock firmware) on your Galaxy R & then flash the Neo ROM 3.0. And yes you can flash the stock firmware of any region it'll be compatible & won't create issues as long as you're flashing stock ROMs by Samsung for Galaxy R.
Do update here on how it goes.
Hope this helps
'cooleagle' said:
The kernel version you quoted contains 'XWKI5' which is the code for Indian stock firmware.
For using Neo ROM you'll have to flash the XWLA (European stock firmware) on your Galaxy R & then flash the Neo ROM 3.0. And yes you can flash the stock firmware of any region it'll be compatible & won't create issues as long as you're flashing stock ROMs by Samsung for Galaxy R.
Do update here on how it goes.
Hope this helps
Click to expand...
Click to collapse
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?...
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
roonie said:
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?
Click to expand...
Click to collapse
Yes you can reflash our Indian stock 2.3 5 ROM anytime you want, reset your custom firmware counter & claim warranty for your handset, be careful while doing the same cause if you screw up / miss some steps then you could loose your warranty.
roonie said:
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
Click to expand...
Click to collapse
Kernel v 1.8.3 is compatible with XWLA4 / XWKI5 (There could be some bugs with XWKI5 but there's no harm in trying as long as you follow the steps) can also be used with Neo ROM.
Try the newer version of his kernel here, it has been improved a lot since then: http://forum.xda-developers.com/showthread.php?t=1787454
Before you start flashing any ROMs & kernels I would suggest you to read all the threads stickied in the Dev section, FAQ's & How To's in my signature below, if you haven't already done it & don't forget to take a nandroid backup.
It is to understand the various steps you need tu know to go about flashing kernels, ROMs, etc & also how to clear the counter to claim warranty.
Cheers !
roonie said:
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?...
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
Click to expand...
Click to collapse
Yes for Neo ROM, u have to flash Stock rom of XWLA4 via odin.It will not affect anything but u need to wipe data after flashing. So take a backup of all ur data and then flash it. Apart, it wont affect anything buddy. Yes u can revert back to Indian stock rom at any point of time.
And with kernel, Neo ROM by default has ardatdat kernel 1.8.1 and so u will get that kernel when u flash Neo ROM. After that u can flash ardatdat's kernel 1.8.3 as it has RAM hack and its better than its prev versions. Yes u can upgrade, better to say u can change the kernel at any point of time. Have a Happy Flashing.
selva.simple said:
Yes for Neo ROM, u have to flash Stock rom of XWLA4 via odin.It will not affect anything but u need to wipe data after flashing. So take a backup of all ur data and then flash it. Apart, it wont affect anything buddy. Yes u can revert back to Indian stock rom at any point of time.
And with kernel, Neo ROM by default has ardatdat kernel 1.8.1 and so u will get that kernel when u flash Neo ROM. After that u can flash ardatdat's kernel 1.8.3 as it has RAM hack and its better than its prev versions. Yes u can upgrade, better to say u can change the kernel at any point of time. Have a Happy Flashing.
Click to expand...
Click to collapse
Want to ask you one thing ,
...When my phone crashed last time all apps crashed , I was not able to go to homescreen so i tried restore using cwm with my backup but after restoring it was stuck in Samsung logo at the boot itself...This has happened all times when i tried to restore..Why this happened...how can i restore to my previous state with that backup..My phone had crashed atleast 4 times and the restore had never worked ,dont know why it had happened(this all happened after i rooted my phone)....
roonie said:
Want to ask you one thing ,
...When my phone crashed last time all apps crashed , I was not able to go to homescreen so i tried restore using cwm with my backup but after restoring it was stuck in Samsung logo at the boot itself...This has happened all times when i tried to restore..Why this happened...how can i restore to my previous state with that backup..My phone had crashed atleast 4 times and the restore had never worked ,dont know why it had happened(this all happened after i rooted my phone)....
Click to expand...
Click to collapse
Buddy. Whats the ROM u were in when u took the backup in CWM and while in which ROM u tried to restore the CWM backup
selva.simple said:
Buddy. Whats the ROM u were in when u took the backup in CWM and while in which ROM u tried to restore the CWM backup
Click to expand...
Click to collapse
Till now i was using XWKI5 stock rom...I had made backup of the stock rom only , and tried to restore (because it got corupt ) , after restore it was stuck at the samsung logo...Anyways everythin is gone , iam just plannin to flash neo rom
hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..
Rakib drh said:
hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..
Click to expand...
Click to collapse
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
This can happen due to a few things; the first and most obvious to me is that you didn't flash the correct version of the ROM. Please link me to the ROM you used and I can tell you if you did or not.
The second is that you aren't running the correct kernel, if the JB Mini Project runs on the CM10 kernel and you haven't flashed that first it won't work.
The third is that you didn't wipe all of the partitions (it seems as though you haven't) you need to wipe System, Dalvik Cache, Cache, then User Data.
If you want to restore to stock firmware download this program (http://androxyde.github.io/) and then download the .ftf file from one of the links in the link I will provide (http://pastebin.com/raw.php?i=fU3SBnQr).
When you have got both of them things PM me and I will help you.
Rakib drh said:
hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..
Click to expand...
Click to collapse
Hi, i also experienced this before. I just flash it using Flashtool [androxyde.github.io] and now my phone is coming back like usual. First, download your Stock Firmware, and flash it. CMIIW
gamer649 said:
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
This can happen due to a few things; the first and most obvious to me is that you didn't flash the correct version of the ROM. Please link me to the ROM you used and I can tell you if you did or not.
The second is that you aren't running the correct kernel, if the JB Mini Project runs on the CM10 kernel and you haven't flashed that first it won't work.
The third is that you didn't wipe all of the partitions (it seems as though you haven't) you need to wipe System, Dalvik Cache, Cache, then User Data.
If you want to restore to stock firmware download this program (http://androxyde.github.io/) and then download the .ftf file from one of the links in the link I will provide (http://pastebin.com/raw.php?i=fU3SBnQr).
When you have got both of them things PM me and I will help you.
Click to expand...
Click to collapse
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i didn't knew that i have to flash a custom kernel. if i flash it now will it fix this problem. could you please give the link of cm10 kernel for Miro.
i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that?
Rakib drh said:
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that also?
Click to expand...
Click to collapse
I know the exact problem now. The ROM is based on CM10. You haven't flashed the CM10 kernel onto the phone before you flashed the ROM. I'll PM you know so you can reply if you need any help.
---------- Post added at 03:52 PM ---------- Previous post was at 03:22 PM ----------
Rakib drh said:
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i didn't knew that i have to flash a custom kernel. if i flash it now will it fix this problem. could you please give the link of cm10 kernel for Miro.
i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that?
Click to expand...
Click to collapse
Download the FXP CM10 version 218 from this link (http://uploaded.net/file/rwdt97g6/from/0cedff) and extract the boot.img from the .zip you download. Google how to fastboot flash kernels as I can't help you here.
i downloaded the flashtool and the stock firmware. but how to connect Miro on flash mode? Also I intalled Twrp over Cwm But When i go to recovery CWM shows up. How to Get back to TWRP as i have also made a backup with it.
Rakib drh said:
i downloaded the flashtool and the stock firmware. but how to connect Miro on flash mode? Also I intalled Twrp over Cwm But When i go to recovery CWM shows up. How to Get back to TWRP as i have also made a backup with it.
Click to expand...
Click to collapse
Phone is back to normal. just flashed the stock firmware. thank you everyone.
Rakib drh said:
Phone is back to normal. just flashed the stock firmware. thank you everyone.
Click to expand...
Click to collapse
how did you that... i need a step by step procedure to ....
Fastboot flash boot.img or any kernel that has recovery and flash a rom
stuck on jb mini project
gamer649 said:
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
my PM is 0130-BV
Click to expand...
Click to collapse
hello i am new to xda and just created a thread for help about my problem. I flashed razodroid v4 one day and thought of flashing jb 4.2.2 touchwiz rom. I flashed it and it worked fine for some days, then i thought of flashing sd-ext patch and it also worked fine with my ext4 sd card.
one day when i was tired of my slow phone, i installed the badass kernel and it installed succesfully and worked for some hours.....
after that the phone turned off suddenly and never went on always went to the text Galaxy Fit GT-S5670 and then nothing..
then i flashed the froyo official stock rom from odin it worked fine but there the recovery was showing the following problem and i was not able to flash any rom from recovery from that day.....
plzzz help me from this problem i want to upgrade to android 4.3 i am now having the gingerbread stock dxkt7 that i flashed from odin.
Reflash latest 2.3.6 [Gingerbread] firmware using odin --> Wipe everything --> Flash CWM --> Flash your desired ROM following all instructions perfectly..It should solve all problems..
Btw why you had flashed froyo firmware..?
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329
dindnt help!!!!!
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin
ritikbanga said:
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin
Click to expand...
Click to collapse
The first step I told you is that only..Reflash stock GB 2.3.6 using Odin..-_-
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329
that was the first step only......
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......
ritikbanga said:
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......
Click to expand...
Click to collapse
After flashing stock Gingerbread goto stock recovery, wipe data/factory reset and it will boot, have patience.
Flash the CWM v5 (via odin) by tj style, cwm v6 is slow and buggy
problem still persists......
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........
ritikbanga said:
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........
Click to expand...
Click to collapse
The certain errors u r seeing in cwm recovery will disappear when u flash ny custom rom. They r only visible under samsung official stock rom.
Edit: & do format /system b4 flashing custom rom for the 1st time over stock otherwise u will get hanged at the android-text/boot-up screen forever...remember that..!!
no luck yet!!!!!!!!!!
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............
ritikbanga said:
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............
Click to expand...
Click to collapse
Oh Bro!! Now I saw ur SS carefully (by zooming). Don't use this recovery by dany... Always use cwm recovery by tjstyles v5.0.2.7.
Now it should definitely work coz I have it already...:thumbup:
Hope this helps...!!!
not working.....
thanks for the reply but i did flashed it with cwm 5 by tj styles before.......
and it is not rebooting.
only able to flash through odin....
problem solved!!!!!!
problem is solved now