Database Info

Rooted???

I'm having a really hard time with the rooting of this phone ... I can't get the update.zip to wrk. All it does is starts to unpack the files then goes to a screen with a triangle over the android guy then I have to do a battery pull !!! I keep reading and can't figure out what I'm doing wrong
Sent from my SCH-I500 using XDA App

Get z4root off here and run it. It will hang up the first time. Pull the battery and restart your phone. Then run z4root again. This time it will root your phone.
Just when you think you have it idiot proof, they come out with a better idiot.

I've tried it it hangs everytime even after a battery pull
Sent from my SCH-I500 using XDA App

Igotno said:
I'm having a really hard time with the rooting of this phone ... I can't get the update.zip to wrk. All it does is starts to unpack the files then goes to a screen with a triangle over the android guy then I have to do a battery pull !!! I keep reading and can't figure out what I'm doing wrong
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You need to be more specific, there are different steps to take if you're working from 2.1-update1 or 2.2, sounds to me like you're following steps for customizing 2.1-update1 when you should be upgrading to 2.2, check out the link in my signature - should be pretty helpful...

Igotno said:
I've tried it it hangs everytime even after a battery pull
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
If the second time around it takes a few seconds fir it to finish. If thats not working try super one click on xda.
Just when you think you have it idiot proof, they come out with a better idiot.

built2rail said:
If the second time around it takes a few seconds fir it to finish. If thats not working try super one click on xda.
Just when you think you have it idiot proof, they come out with a better idiot.
Click to expand...
Click to collapse
This would be if you're trying to root from 2.1-update1

just use super one click, it is more reliable i have found.
and i had the same issue with the screen sitting at the android guy with exclamation point.
if you hit the home button again i believe the screen comes back and you can see the messages and the recovery menu.

I'm running 2.2 .... No the home key didn't take me back to recovery had to battery pull each time...I used super one click and it said it was successful but I'm not seeing that I have anymore control or access to stuff!!!
Sent from my SCH-I500 using XDA App

Igotno said:
I'm running 2.2 .... No the home key didn't take me back to recovery had to battery pull each time...I used super one click and it said it was successful but I'm not seeing that I have anymore control or access to stuff!!!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
And this is why it's important to ask questions before ANSWERING, when you're not sure of what the poster is actually trying to do.
Ignotno, go back and re-read the original thread for the 2.2 leak, it comes pre-rooted so you shouldn't have to do anything. If you're having problems with root, then you should try superoneclick (as noted above).
You're following processes for customizing a stock 2.1-update1 phone, you should go back to my newbie guide and read the steps for customizing 2.2.

Igotno said:
I'm running 2.2 .... No the home key didn't take me back to recovery had to battery pull each time...I used super one click and it said it was successful but I'm not seeing that I have anymore control or access to stuff!!!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
rooting doesnt open up a magic door with all kinds of cool stuff.
Rooting just unlocks the door, you need to open it and do all the cool stuff.
download a tool call Quickreboot from the market.
open it and choose REBOOT
it should ask you for Superuser permission.
tell it yes, and the phone should reboot.
if it tells you you dont have root permission then you are not rooted yet
if it works then you have been rooted and you are probably trying to root the 2.2 rom via the 2.1 method and i do not know if that works.
download the prerooted 2.2 and flash it via odin.
it is already rooted and you do not have to do anything else.

v_lestat said:
rooting doesnt open up a magic door with all kinds of cool stuff.
Rooting just unlocks the door, you need to open it and do all the cool stuff.
download a tool call Quickreboot from the market.
open it and choose REBOOT
it should ask you for Superuser permission.
tell it yes, and the phone should reboot.
if it tells you you dont have root permission then you are not rooted yet
if it works then you have been rooted and you are probably trying to root the 2.2 rom via the 2.1 method and i do not know if that works.
download the prerooted 2.2 and flash it via odin.
it is already rooted and you do not have to do anything else.
Click to expand...
Click to collapse
This made me laugh... mostly because when I first started looking at rooting I also thought it would magically make my phone amazing
And just to add a quick point; you would also know you have Root Access if the SuperUser application appears in your application drawer...

Glad I can make you chuckle... yes I did notice it and as far as its concerned does nothing on my phone that I see
Sent from my SCH-I500 using XDA App

If I remember correctly the first time I used superoneclick I had to download superuser from the market.
___________________________________
Just when you think you have it idiot proof, they come out with a better idiot.

Its already on the phone musta come with 2.2
Sent from my SCH-I500 using XDA App

Igotno said:
Its already on the phone musta come with 2.2
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It does. For some reason I was thinking you were on 2.1.
___________________________________
Just when you think you have it idiot proof, they come out with a better idiot.

Igotno said:
Its already on the phone musta come with 2.2
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It doesn't "do" anything per-say, what it does is stores the names of programs which you have given superuser access (once you've done so)
The easiest way to test is (as stated above) to download some sort of ROOT app (root explorer, quick boot, etc.) and when you run them for the first time you should get a screen asking permission for the superuser access, once given this access it has read/write access to your system files (that's basically all root is).
You'll want to do a lot of reading on the forums before you attempt using any of these themes/mods/roms as you'll want a better understanding of the process before you get started.

Nice comment thank you ... You clarified alot abig help.. Yes it is rooted all is well it hangs once while, if I try doing to much!
Sent from my SCH-I500 using XDA App

Igotno said:
Nice comment thank you ... You clarified alot abig help.. Yes it is rooted all is well it hangs once while, if I try doing to much!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Since you're rooted (and sounds that you're still on stock 2.2 framework) I would suggest getting the EA11 clockwork recovery installed (if you haven't)
then go over and flash the pick and pack EA11 rom (this is the stock 2.2 framework with all of the bloat programs removed, and i'ts deodexed so that you can then flash theme's over it to customize the appearance)
After you have pnp i would then flash the new EA11 Voodoo kernel (This is a system mod that changes the EXT storage system, which in turn speeds up the phone and saves a little battery life for being faster.) This will fix your hang problems (once you actually enable Voodoo lagfix through the recovery menu) instruction is all posted in threads on the forums here, refer to my newbie guide if needed (link in my signature.)
After that take a look at the EA11 themes you have to choose from, if you're interested in changing appearance.
Good luck!

[Q] HELP xoom root!

ok so i rooted my xoom the other day flashed hammer head 2.1. restored my tablet to stock rooted rom buwhen i did i have now found a way to lock my device. i can boot up and have my su icon available to me however i cannot gain root access even through adb it tells me the file system is read only. so i figured i some how unrooted the device and proceeded to begin the root process for honeycomb. however when trying to push su over to the tablet it tells me the file failed to transfer because the file system is read only what do i do now? Any help would be appreciated.

Ok i have now some how erased my device completely it stops at the moto dual core boot screen. I still have cwm but thats it. Im at a loss guys. Bout to warranty this by runnin over it!
Sent from my ADR6400L using XDA Premium App

josephparlangeli said:
Ok i have now some how erased my device completely it stops at the moto dual core boot screen. I still have cwm but thats it. Im at a loss guys. Bout to warranty this by runnin over it!
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
your a noob mate seriously... these board are full of people like you... 1.. download the stock images from
http://developer.motorola.com/products/software/MZ604_HWI69.zip/
if your device is a wifi only and then push the files with fastboot...
ie.. unzip the folder into where the adb fastboot exe are
1. fastboot flash system system.img
2. fastboot flash boot boot.img
3. fastboot flash user user.img
4. fastboot flash recovery recovery.img (as you obviously cant handle root..)

Dont have to be an ass about it. But yeah already tried that when i try to push the files it tells me there is no such directory found. So i made sure in cwmr the system was mounted then it tries to transfer but tells me the directory is read only. So i tried the unlock procedure to make sure the tablet was unlocked. everything goes smoothly till i try to transfer the files again.
Sent from my ADR6400L using XDA Premium App

josephparlangeli said:
Dont have to be an ass about it. But yeah already tried that when i try to push the files it tells me there is no such directory found. So i made sure in cwmr the system was mounted then it tries to transfer but tells me the directory is read only. So i tried the unlock procedure to make sure the tablet was unlocked. everything goes smoothly till i try to transfer the files again.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Not talking mounting in cwm here bud
Get to fastboot mode not android recovery same process power plus vol down
Then flash the files not push as mounting in cwm only put the files on sd card not flashing it outright from what your reply was
I was a noob once and soft bricked everything and yet i read and read and fixed stuff myself through searching.. Cuz ultimately if its bricked what do u have to lose then ey lol just find and try everything cant make a worse paperweight than one u may already have eh
But get to fastboot not cwm then flash the files like i said and it will almost certainly work
Sent from my HTC Sensation 4G using XDA Premium App

Thats my other problem my sd card slot isnt wrkn that was my initial instinct. If i try to flash to the sd card it says no directory found. Ive used 3 different sd cards and get the same message. Im really thinkin i got a bad sd slot even when it was rooted and running i had issues with the sd card not wrking. I had several back ups on it when it did wrk and those dissappeared as well. I bought the xoom soley because of the sd card slot was pretty much going to be my saving grace when doing back ups if i ever messed up. I tried wrking it in fastboot as well if i try to flash to the system its read only. If i flash to the sd card directory not found. I know these questions are irritating to more savy individuals and i looked around trust me the last thing i like to do is say der i dun broke it i need an adult. Im just makin sure i didnt over look something more savy ppl know about. I honestly think its bricked at this point. Ive tried what you said and any other way i can think of but i alway get some kind of error.
Sent from my ADR6400L using XDA Premium App
Sent from my ADR6400L using XDA Premium App

What version of clockwork mod recovery are you using?

I believe is 4.0.0.2 i just got to wrk i know its the latest release tho.
Sent from my ADR6400L using XDA Premium App

josephparlangeli said:
I believe is 4.0.0.2 i just got to wrk i know its the latest release tho.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
I would use this recovery instead of 4.0.0.2.

Ok thats a very helpful link. Did not know they had a special recovry for the xoom or realize that it wiped out all media if i didnt have this recovery. Lesson learned however i think its bricked solid now cuz it wont charge or come on at all may very well be a bad unit but i c where i went wrong with su as well i flashed 3.0 with out the chmod 4577 during the su update from cwm. Well im going to grab another one from bb and c what happens the unit is non responsive at this point. Thanks to everyone that posted here for the help.
Sent from my ADR6400L using XDA Premium App

josephparlangeli said:
Ok thats a very helpful link. Did not know they had a special recovry for the xoom or realize that it wiped out all media if i didnt have this recovery. Lesson learned however i think its bricked solid now cuz it wont charge or come on at all may very well be a bad unit but i c where i went wrong with su as well i flashed 3.0 with out the chmod 4577 during the su update from cwm. Well im going to grab another one from bb and c what happens the unit is non responsive at this point. Thanks to everyone that posted here for the help.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
you needed to flash the recovery with FASTBOOT.. not adb push chmod stuff; much easier and the process works
read the top post again.. get the recovery.img file (the v3 one the other fellow told you to grab)
1. hold the volume down button and the power button... some text will come on up the top about fasboot protocol and then
2. leave it plugged in to your computer and DONT TOUCH THE XOOM...
3. get your cmd.exe prompt window out and navigate to where your adb.exe AND fastboot.exe files are (should be tools or platform-tools...)
4. Place the recovery.img file into the explorer window where the adb.exe and fastboot.exe both are.... (this should be there as u keep trying to use adb commands but do it again to make sure)
5. type fastboot flash recovery recovery.img
thats the recovery.img flashed...

Got my xoom replaced the other day works fine have root flashed the above mention cwm and everything worked fine. Funny thing tho when they checked to see if the original device had been unlocked they said it was still locked and they gave me a replacement. Other wise id have had to use the warranty i bought. Just thought that was odd.
Sent from my ADR6400L using XDA Premium App

josephparlangeli said:
Got my xoom replaced the other day works fine have root flashed the above mention cwm and everything worked fine. Funny thing tho when they checked to see if the original device had been unlocked they said it was still locked and they gave me a replacement. Other wise id have had to use the warranty i bought. Just thought that was odd.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Well, there's your answer. You did not successfully unlock.
Glad that you learned some useful things.

flying honey comb on xoom mz601
Hi everybody. I install new image for my xoom MZ601 (tiamat last version).
Xoom from Hongkong (CHINA) with 3G.
i make all steps about unlock bootloader and root. After all that steps - i have ClockworkRecovery v 3.2.0.0 (solarnz-R4c-100611-1150). After reboot (motorola logo) i see all time honeycomb flying.
I need help.
opps: i unbrick my device on android 3.0.1. Now try again to install 3.2 by Tiamat
3.2 doesn't work. SAD

aKolp2010 said:
Hi everybody. I install new image for my xoom MZ601 (tiamat last version).
Xoom from Hongkong (CHINA) with 3G.
i make all steps about unlock bootloader and root. After all that steps - i have ClockworkRecovery v 3.2.0.0 (solarnz-R4c-100611-1150). After reboot (motorola logo) i see all time honeycomb flying.
I need help.
opps: i unbrick my device on android 3.0.1. Now try again to install 3.2 by Tiamat
3.2 doesn't work. SAD
Click to expand...
Click to collapse
You should open a new thread with your issue. Seems the OP in this one has fixed his issues by replacing his Xoom. You'll get better attention by creating a new thread in this forum.

[Q] Question to [airfluip1]

I Downloaded and installed your rom from HERE using rom manager, And I'm not sure what I did wrong but when I turn on my phone it goes to Phone Logo screen (first screen) then all black with a corrupted blue lines at the bottom about half an inch long. Then, a couple seconds later it goes to a full corrupted screen. then it just does everything repeatedly.
Sorry I can't take screen shots since my phone doesn't work. But any idea of what I might of done wrong?
My phone is already rooted and CwM was already installed. Not sure if the installation process was messed up or not. And I can't get my phone into the CwM recovery to fix this problem.

Dark9 said:
I Downloaded and installed your rom from HERE using rom manager, And I'm not sure what I did wrong
Click to expand...
Click to collapse
There are a bunch of threads and a sticky! (2nd topic in the Dev Forum) that state Rom Manager does not work with this phone. That is what you did wrong.
you should have flashed the rom in CWM, but since the damage is done, you will have to get the phone in download mode and use ODIN to flash a new rom and start over again.
Hopefully, you can still get in DL mode by holding both volume buttons at the same time and inserting the USB cable.
use FB's starter pack post for the files you need for ODIN, and don't use Rom Manager anymore!
http://forum.xda-developers.com/showthread.php?t=1223765

Or you can use the easier more stable alternative: Heimdall one click
http://forum.xda-developers.com/showthread.php?t=1422824
Sent from my SGH-T959V using XDA App

I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..

Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
That's another download mode screen. The previous screen you described sounds like you didn't have the right boot loaders in place. Check out The KJ6 Heimdall One-Click Collection. Select any of the three of those you want to use, and follow Bhundven's instructions (really easy). All you need to have installed previously is Java.
Let us know how it goes.

Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
This is another form of download mode. Heimdall should recognize the device and flash it.
Sent from my SGH-T959V using XDA App

Dark9 said:
I tried to do the One-Click. But for some reason A caution sign in-between the link connection of the phone and pc..
EDIT: I've Tried pulling everything out battery, sim, sd, usb cord both end. waited a couple mins... then put everything back and tried again..
Click to expand...
Click to collapse
I think thats like the last resort for our phones. I get it if i mess up during the first attempt to unbrick

Sweet thanks for the help I've got my phone UP and running now. ^^

Dark9 said:
Sweet thanks for the help I've got my phone UP and running now. ^^
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App

> rom manager
Found the problem
Sent from my SGH-T959V using XDA App

tehgyb said:
> rom manager
Found the problem
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Lol
That or ignoring the sticky (first threads) in the development section entitled "don't use ROM manager"
Sent from my SGH-T959V using XDA App

Bassmanjames said:
Lol
That or ignoring the sticky (first threads) in the development section entitled "don't use ROM manager"
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yeah. Lots of people don't read those. They just want to flash a ROM as quickly as they can. All the noobs should get a popup when they first join xda instead so they DO read it. Lol
-Sent From My Amazing SGS4G-

After the popup they should get quizzed on what they read lol
Sent from my SGH-T959V using XDA App

erikmm said:
After the popup they should get quizzed on what they read lol
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
We need operation iron fist back lol
Sent from my SGH-T959V using XDA App

The only reason I used Rom manager is cause I was told it was one way to install the roms

[Q] T-Mobile LG G2x crashed, need help

ok, so a few days ago i was flashing the G2x weapon rom onto my rooted G2x, but while i was in the clockwork mod to flash it it froze on me, i left it like that for an hour or so, but it didnt work, so i took the battery out. now whenever i turn it on, it loads the LG screen, then nothing, the screen stays turned on, but its black, ive tried to boot it into recovery mode but that does not work either. What should i do?

Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck

thanks ill try that

ed116 said:
Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck
Click to expand...
Click to collapse
+1
Also try holding the vol down+pwr for longer than usual might just be being difficult
Making bad decision's one at a time.

so when i get into nvflash it says usb not found,
i did all the steps, and had it all done, but it dosent find my phone

Did u install the drivers correctly? That's probably the problem if it says USB is not found. I believe there is a video about how to install the drivers. Ill look for the video now
Sent from my LG-P999 using xda premium

Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium

moeahmad1995 said:
Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1054492
This was written for Windows users, I followed this one myself, pretty straight-forward, and "idiot proof". (If anything can be truly idiot proof. Cynical, who, me?)

so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.

reki94 said:
so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.
Click to expand...
Click to collapse
Since changing to Nvflash, did you download the rom you want to install and transfer it to the phone from your computer. Using Rom Manager it may not have left a copy on your phone.

If you cant hook up the SD card to the computer, get an external SD card and make sure u've installed clockwordmod with external sd, hook it up to a laptop with an SD card slot, and put it in , then take the mini sd and pop it in your phone, then boot up and that should do it good luck! atleast now your 1 step closer to recovering your phone

Ughh hate,seeing this happen...hope u flashed nV..all the best
Sent from my LG-P999 using xda premium

Hope you didn't brick your phone.

No you did not brick your phone. Rom manager downloads the file to sdcard/clockworkmod/downloads. Look there for the file. Only if you download a rom from your browser does it go to externalsdcard/downloads
Sent from my LG-P999 using xda premium

[Q] Getting my hands on a bricked g2x today....

he said he bricked it trying to upgrade to ICS.
is the sticky at the top still the way to unbrick it? i noticed that a couple links were dead in the first post. granted i didn't go through all 17 pages, just wanted to make sure there wasn't anything newer then whats already been posted.
edit: he did say that the screen is showing s/w if that matters

Was it bricked by flashing a o2x rom? I think that may be the hardest brick I have heard of but still fixable. I believe if that is the case than following the sticky should restore the baseband and everything else.
Honestly though I would first try just reflashing CWM via nvflash, boot into recovery and load a stable GB rom. If that works, great.

LurkerRWO said:
Was it bricked by flashing a o2x rom? I think that may be the hardest brick I have heard of but still fixable. I believe if that is the case than following the sticky should restore the baseband and everything else.
Honestly though I would first try just reflashing CWM via nvflash, boot into recovery and load a stable GB rom. If that works, great.
Click to expand...
Click to collapse
he just said things went haywire when trying to flash ICS. i've been messing around with the sticky but can't get anything to work....yet!

im on windows 7 if that matters
and after i boot into recovery the screen is just flashing black. any ideas?

everything i do with flashing it just sits at the prompt saying "flashing" and nothing else happens.

blackbeasst said:
he just said things went haywire when trying to flash ICS. i've been messing around with the sticky but can't get anything to work....yet!
Click to expand...
Click to collapse
You apparently you did not even read the first post. XP only, will not work with Windows 7.
"As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Edit: As an alternative, a virtual environment running XP will do the job. Those steps are up to you."

That's not true. I updated the baseband using win7 on my first try. No need for comparability mode.
Sent from my LG-P999 using XDA App

LurkerRWO said:
That's not true. I updated the baseband using win7 on my first try. No need for comparability mode.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Can confirm that too. Was working fine on 32 bit win7, using the method from the stickies upgrading wind's June baseband.
Sent from my LG-P999 using xda premium

duple and lurker, thanks for the confirmation that it works with 7
when i try and push the kdz i get the dreaded phone not found.

ok im on my xp machine here at work and heres what i got:
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
no problems with above steps. after that nothing works. when i put the battery back in and turn on thats when i get the flashing black screen, not back to the s/w screen.
5) Put the battery back into the phone and turn it on. You will be back at the S/W Upgrade screen. This is where you want to be! Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)

ok just for craps and giggles i tried booting into recovery and actually got the box with arrow and android! but it then reboots back to the lg screen and then flashing black screen

WOOT! finally able to get into CWM recovery!
is all that needs to be done now is install a stable rom?

double WOOT! back up and running. time to test the functionality of if though!
edit: can't find the sim and no service.

blackbeasst said:
double WOOT! back up and running. time to test the functionality of if though!
Click to expand...
Click to collapse
Delighted to hear that. So, another confirmation of the "old" folks stating it's 99.9% un-brickable.
Sent from my LG-P999 using xda premium

DupleX01 said:
Delighted to hear that. So, another confirmation of the "old" folks stating it's 99.9% un-brickable.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
and im a tard. sim was inserted bass akwards

blackbeasst said:
and im a tard. sim was inserted bass akwards
Click to expand...
Click to collapse
Congrats man.
Sent from my LG-P999

wifi seems to be flaky. keeps scanning and dropping work and home network
also it appears that the market wasn't on that version of the rom. is that a quick fix?

Now you have the recovery and baseband sorted, start from scratch and do a full wipe(including system internal/external SD). Then flash a stable ROM Weapon/EB to make sure everything is good. Just my 2 cents
Sent from my LG-P999 using xda premium

DupleX01 said:
Now you have the recovery and baseband sorted, start from scratch and do a full wipe(including system internal/external SD). Then flash a stable ROM Weapon/EB to make sure everything is good. Just my 2 cents
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
im was lucky to get it up and running, so im still a flashing noob! but what is considered a stable rom for this phone?
i grabbed one from cyanmod earlier today. i think it was from around 3/13?

blackbeasst said:
im was lucky to get it up and running, so im still a flashing noob! but what is considered a stable rom for this phone?
i grabbed one from cyanmod earlier today. i think it was from around 3/13?
Click to expand...
Click to collapse
You were lucky, indeed!
A CM nightly can be stable too, however I would flash either Weapon or Eagles Blood for a couple of days to have a piece of mind that everything is working cool. The most important would be a proper full wipe (cache, dalvik, system under mounts and storage, battery stats and imho internal and external SD too) too get rid of the previous mess caused by the unsuccessful flash, etc.
Sent from my LG-P999 using xda premium