[KPN] Problems with usb - Samsung Galaxy SL i9003

Hello, today I install KPN,want to install CF-ROOT, but computer does not find the phone in firmware mode, when the phone included find, but only to KIES mode.
In CWM (from Samsung) error: -"Can't access to '/system/csc/SER/system/'".
Help me Please.

u must flash cf-root in download mode using Odin.
and i think post in wrong thread.

You need to greet into download mode (Vol down + home + power) to flash CF-ROOT (or flash anything through Odin for that matter).
Make sure your Samsung drivers are installed and that Kies isn't running in the background on your computer.
As for your CSC problem, flash just the CSC file from XXKPE again (i.e. The file with "multi-CSC" written on it, through Odin, while phone is in download mode) and wait for the phone to boot.
Sent from my GT-I9003 using XDA App

Related

[Q] Bricked phone

Hi, I was on CM9 ALPHA8 and I flashed with odin 1.85 and 3.04 the latest I9003XWLF2_I9003XXLE4_I9003ITVLF2_ stock rom used as PDA, but each time I pressed Start it was stuck in setup connection..., then I plugged battery off and now my phone doesn't boot up, and I can't go in recovery/download mode, anyone help ? I tried the trick pressing the hard-reset button behind the phone with a pin but no success, even tried by removing battery, pressing the buttons for download mode and put battery back in, all it did was windows looking for the omap3630 drivers .
Each time I remove battery and put battery back in (with usb plugged) I heard the windows sound.
Thanks for your help...
Make sure phone drivers are installed on ur pc.
Or either kies is installed.
Sent from my GT-I9003 using xda premium
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
chongns said:
Have flash xxkpe than only xxle4
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Can't flash anything without download mode...
adaba said:
Can't flash anything without download mode...
Click to expand...
Click to collapse
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
vishal24387 said:
You must do following things
1. install latest kies & restart pc.
2. Use v1.83 odin version.
3. Check whether firmware file u have downloaded is correct or currupted. Its better to download it again.
4. check whether u are applying 3 combination button in correct manner or not to boot in download mode. Most of the time people do mistake in this step.
Click to expand...
Click to collapse
I've flashed over 50 times and yes I know how to put it in download mode...
Anyone help?
jig usb its the solution force the download mode look in google

[Q] Flashing ICS with mobile odin

Hi,
I have the Galaxy Tab+(P6200).I want upgrade my Tab+ to ICS.I try flash with mobile odin, but my tab stuck on samsung bootanimation.I use the open file to flash ics.I have the XXLQ1 firmware.Now I'm back on the Galaxy Rom HD.I try flash with PC odin, but my computer doesn't recognize my tab.I try install MTP my computer recognize only MTP disc.Is there any guide to get ICS via mobile odin to my tab?Sorry for new thread, I can't post to forum with flashing this firmware on my tab.
tom411 said:
Hi,
I have the Galaxy Tab+(P6200).I want upgrade my Tab+ to ICS.I try flash with mobile odin, but my tab stuck on samsung bootanimation.I use the open file to flash ics.I have the XXLQ1 firmware.Now I'm back on the Galaxy Rom HD.I try flash with PC odin, but my computer doesn't recognize my tab.I try install MTP my computer recognize only MTP disc.Is there any guide to get ICS via mobile odin to my tab?Sorry for new thread, I can't post to forum with flashing this firmware on my tab.
Click to expand...
Click to collapse
You should not have to flash anything to get to ICS from HC, its an automatic OTA update.
Provide more details why you are doing ti this way.
Anyway, here's the details. Copied from another thread
motosuki said:
1. download samsung kies to get the correct driver for gt-p6200
2. download odin3 v.1.85
3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot to system
if it's not....
18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
19. turn off your tablet.
20. press volume up + power button about 5 seconds.
21. do wipe cache / factory reset
22. reboot to system
23. it should be booting to system
Click to expand...
Click to collapse
I try OTA update, but it doesn´t find any update.After install Samsung Kies it shows Connect device.Odin v1.85 doesn´t find ID:COM port.And mobile odin flash it succesfully but stuck on samsung bootanimation.How to wipe data after flash in recovery, odin flash stock 3e recovery, I have to flash CWM, stock recovery have the brickbug.Or is it safe?
tom411 said:
I try OTA update, but it doesn´t find any update.After install Samsung Kies it shows Connect device.Odin v1.85 doesn´t find ID:COM port.And mobile odin flash it succesfully but stuck on samsung bootanimation.How to wipe data after flash in recovery, odin flash stock 3e recovery, I have to flash CWM, stock recovery have the brickbug.Or is it safe?
Click to expand...
Click to collapse
Make sure Kies is not running when using Odin.
Sent from my GT-N7100 using Tapatalk 2
Kies not running when I use the odin.I end all Kies processes.
instructions for a mac
Hi, I was wondering how I can install the firmware on my GT-P1000 using a mac. I'm also completely lost on where I can find one that has full functionality for my Samsugn Galaxy Tablet (GT-P1000)... Samsung Kies is a joke. There must be a way that I can install ICS without bricking my tablet.

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.
MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.
mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

[Q] tablet not working properly

when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Help cache partication error
yolo squad dodo said:
when i factory reset the tab and installed a rom. it started normally. i did everything normally and it showed google account manager has stopped.
so i tried going into CWM recovery mode but got me into stock recovery so factory reset the tablet and then tried wipe cache participation but shows error. I think that the problem is the cache and the dalvich. but i cant use usb debugging so i cant delete the cache and the dalvich.
:crying::crying::crying::crying::crying:
so does any body know how to fix this
thanks in advance :laugh:
Click to expand...
Click to collapse
Can anyone help me please!!!!!!!
yolo squad dodo said:
so i tried going into CWM recovery mode but got me into stock recovery
Click to expand...
Click to collapse
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
BoneWithABeagle said:
You are not reading what you are typing.
Obvious answer: If you end up in the STOCK RECOVERY you simply do not have a custom recovery installed (Clockworkmod as you wrote). Get yourself a copy of a recent recovery from AndroidAndi's download repository (TWRP, Clockworkmod Swipe, PhilZ Touch), and flash the .tar.md5 of the recovery with ODIN in download mode.
Obvious question: How did you flash a ROM, other than some OTA Stock Samsung update on the device itself, in the first place when you don't have a custom recovery installed in order to do so?
EDIT: What exactly do you mean by "factory reset"? Did you re-flash your tablet with a Stock ROM? If that's the case, then any custom recovery you had installed was wiped and replaced with the stock recovery. Hence why you now don't have a custom recovery anymore.
Click to expand...
Click to collapse
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
yolo squad dodo said:
Odin won't recognise my tablet in Odin mode neither does my computer is there another to install a CWM recovery. By the the I do have back up on the phone if that helps.
By the way I am a noob
Click to expand...
Click to collapse
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
BoneWithABeagle said:
Just to recap on the steps you should have done...
1. You downloaded the .tar.md5 of the recovery you want to install, from Android Andi's filehost, on your PC
2. You installed the Samsung USB drivers on your computer
3. You installed ODIN on your computer
4. You unplugged the tablet from the charger and powered it off
5. You took your tablet and HELD VOL-UP while you powered it back on (to get into bootloader mode)
6. You plugged the tablet in to the computer and waited for a moment while Windows was installing the driver
--- Here the story ends, according to what you wrote as you say ODIN does not find the tablet.
Well, are you sure you did the steps so far in that order? Can't be that ODIN doesn't detect the tablet when it's operational (read: no a total dead brick) and it's in download mode.
The ONLY problem possible: You installed Samsung KIES, and not just the USB drivers, on your computer. KIES interferes with ODIN. You need to exit ODIN, bring up the Task Manager (press CTRL+ALT+DELETE and select "Task Manager"), find "kies" and end the running process(es) - ignore any warning message.
If that's too complicated: Uninstall KIES and then find the "Samsung Mobile USB drivers" installation package ... with a bit of searching (just to assign some homework to you) you will the links right here in this forum section more than just once.
Once KIES is terminated, or uninstalled and just the USB drivers installed, start ODIN again ... now it should detect the tablet.
Once ODIN confirms that the tablet is detected...
7. Select the .tar.md5 of the recovery as the "PDA"
8. Flash the recovery. Once complete the tablet rebooted into the newly installed recovery.
As for on-device flashing. That's possible...
- Your installed ROM must be ROOTED (no root, no fun)
- You need Chainfire's "MobileODIN" (the free version from the Play Store would suffice), and you need to let MobileODIN install the "p311x flashkernel package" (I think with the free version you need to download it manually from Chainfire's thread and install it manually) - jump into Chainfire's thread and read on
Once you have Mobile ODIN installed it is just a matter of:
- Download the .tar.md5 of the recovery on your tablet once more (or transfer it over from your PC)
- Start Mobile ODIN
- Select the .tar.md5 of the recovery (should automatically be set as a "PDA")
- Flash and reboot into the recovery
However, as a fair warning ... as with every flashing of your device ... keep in mind something could go wrong (just to straighten it out that there's always room for user mistakes or murphy's law getting into the way ("Everything that can go wrong will go wrong"))
Click to expand...
Click to collapse
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
I got it working by installing custom rom.
Thanks a lot by the way for the tips
yolo squad dodo said:
odin recognize tablet and it got flash or what ever its called. it restarted but it didn't go into recovery but just restart as normal
Click to expand...
Click to collapse
For future reference: keeping VOL DOWN UP held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
yolo squad dodo said:
I got it working by installing custom rom.
Thanks a lot by the way for the tips
Click to expand...
Click to collapse
Great you got your recovery and custom ROM installed. Have fun.
BoneWithABeagle said:
For future reference: keeping VOL DOWN held while powering on/rebooting the tablet takes you into the recovery in case you borked the system and selecting "Reboot" -> "Recovery" from within the _custom_ ROM's power menu is not an option (the Stock Samsung ROM does not have that option by default). Though keep in mind that this only works when the tablet is _NOT_ connected to the charger/computer ... when the USB cable is plugged in it seems to ignore the hardware keys.
Great you got your recovery and custom ROM installed. Have fun.
Click to expand...
Click to collapse
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
jrc2
Sent from my T-Mobile S2 using Tapatalk
jrc2 said:
Umm isn't recovery power and volume UP? At least that's how it is on my 7'' tablet and the 10'' I rooted and installed a ROM on.
Click to expand...
Click to collapse
Now that you mention it... yes, you're right jrc... "VOL DOWN" == Download Mode / "VOL UP" == Recovery (I failed to recall the "UP as in update.zip" association).

Custom rom to stock rooted help

Im having a hell of a time trying to go back to stock firmware from custom rom on my galaxy s6... ive tried numerous files from sammobile and using odin with no luck... what am i doing wrong and how can i get this done???
Sent from my SM-G920P using XDA Premium HD app
Download Marshmallow (6.0.1) from sammobile here: http://www.sammobile.com/firmwares/download/67647/G920PVPU3CPB6_G920PSPT3CPB6_SPR/
Or
5.1.1 firmware depending on previous version on android: http://www.sammobile.com/firmwares/download/60059/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR/
1. Power down device
2. Load device in download mode (Vol down + Home + Power)
3. Open Odin, Place downloaded file in Ap Field (You might want to turn off Auto reboot in settings, If you come accross any errors)
4. Connect phone via USB
5. Click start
6. wait 5-10 min if no errors show
Should be as easy as that, Let me know how you go
*Make sure you have the correct Samsung drivers installed for your ddevice other wise Odin will just keep Failing

Categories

Resources