So I just got the latest version of CM7 for my Droid 2 Global and apart from all of the awesomeness there seems to be a fairly big problem: my pc will not recognize my phone being connected. It used to work (I used it to unbrick my phone, flash CM, root my phone, unroot it because GB raped my root, and I just used it to charge my phone on a daily basis). I've looked for this issue everywhere, and I either can't find somebody that has the same issue, or the way they resolved it doesn't work for me. What's interesting though is that if I plug in my phone then reboot it, my pc recognizes it... But if I unplug it, my pc won't recognize it if I plug it back in again. Hopefully this is simple enough that I can solve it (with anybodies gracious help of course) but not too simple that I feel stupid (even though I know almost nothing about what I'm actually doing).
Any helps and/or flame is greatly appreciated.
You probably would have much more luck solving this problem by heading to the forums where people actually work on this CM7 port.
http://rootzwiki.com/topic/4922-cm7-for-droid2-global-users-thread/
Same issue
This is a known issue.
fluffy312 said:
So I just got the latest version of CM7 for my Droid 2 Global and apart from all of the awesomeness there seems to be a fairly big problem: my pc will not recognize my phone being connected. It used to work (I used it to unbrick my phone, flash CM, root my phone, unroot it because GB raped my root, and I just used it to charge my phone on a daily basis). I've looked for this issue everywhere, and I either can't find somebody that has the same issue, or the way they resolved it doesn't work for me. What's interesting though is that if I plug in my phone then reboot it, my pc recognizes it... But if I unplug it, my pc won't recognize it if I plug it back in again. Hopefully this is simple enough that I can solve it (with anybodies gracious help of course) but not too simple that I feel stupid (even though I know almost nothing about what I'm actually doing).
Any helps and/or flame is greatly appreciated.
Click to expand...
Click to collapse
i wonder how to SBF if tis happen..i using cm7 froyo based now
Yall need to install the nexus drivers through sdk tools.
mentose457 said:
Yall need to install the nexus drivers through sdk tools.
Click to expand...
Click to collapse
I don't know about the above advice, but,
I do know that I have read many many posts where the problem was resolved by getting the most recent drivers for your device. Unfortunately, I don't have a link to these to post, and I am not sure this will solve your problems but...
Just my 2¢
D2G CM7GB
mentose457 said:
Yall need to install the nexus drivers through sdk tools.
Click to expand...
Click to collapse
Could you be a little more specific? I've got the latest version of the google USB drivers installed available on the Android SDK tools.
ElectroGeek said:
I don't know about the above advice, but,
I do know that I have read many many posts where the problem was resolved by getting the most recent drivers for your device. Unfortunately, I don't have a link to these to post, and I am not sure this will solve your problems but...
Just my 2¢
D2G CM7GB
Click to expand...
Click to collapse
It's not a problem with the latest drivers. It works fine when the phone is connected to the computer and then the phone is restarted. When it comes back up it is recognized perfectly fine. It's definitely something wrong in the build.
Related
I have an urgent question regarding rooting my new Optimus V (Virg Mob), that if possible, i could use an immediate answer for i have very limited time.
I recently purchased a like new, used Optimus V 2.2 o/s off a friend, that is currently not-activated on the Virgin Mobile network, but have been sending/recieving calls and texts through Wi-Fi apps such as Line2 and netTalk. Is it possible to use sublimewulf's method of rooting the opt_v without service (prefer one click root)? i understand that it says it must be activated, but im curious if Wifi will work just as good, or if there is a simple ''one click root'' method i could use. im just not sure why it must be active, im not sure what is done during the one-click method.
Can I root my Optimus V with a One Click root program/app WITHOUT service/activation? If so, could someone please point me in the direction of the download + instructions? Much thanks, its greatly appreciated for all future help- you have no idea..
Thanks XDA Dev team + members,,
Southcide
Here you go...
http://androidforums.com/optimus-v-...astboot-style-fastest-easiest-way-around.html
Just click the thank button ;-)
Thank you very much, is it normal for the file to be especially large? not sure if the optimus could fit a 173mb file.
Also, what are the chances of this bricking my opt.v or ultimately destoying the operation of the phone??
Also, could you recommend a few ROM's? I heard cyanogenmod is rather popular, but what is it? whats it do- what makes it so special, i guess is what im trying to say. also, is it possible to put the new gingerbread o/s on my opt? would it run as smooth as it runs as is? thanks again, so
what would be a nice ROM to install, and where can they be found (free). also, what are the chances of this root device destroying my handheld, or bricking it? thanks again bro for the fast and accurate response! +thanks for sure!
Oh also,
Asadullah said:
(DEPRECATED)
I no longer support or care to support this is someone wants to take over and deal with this and the complaints go for it. It has not been tried on the 2.2.2 version of android in case you want to try it.
Click to expand...
Click to collapse
What is the meaning of this, under the fastbootroot thread? if this program at least works, why would he tag it as being deprecated? also saying he is tired of the complaints. please exp?
thank you. im trying to avoid the slightest bit of damage done to my new phone.
***EDIT::: Do i download the files (from the link you posted) to my phone, or my pc??
He means the complaints of him not working on it.
All you have to do is download this on your computer, as well as the LG drivers, and choose the [Full Package] option, and it will root your phone. Afterwards, see if you can get into recovery, and if not, run the program again and choose the [Flash a custom recovery] option.
Ive used this several times, never a problem.
Best ROM for me was Harmonia, which can be found on Android Central.
i tried both quickbootroot (your link/app posted above) , and also SuperOneClick v2.2, and neither one worked. I tried SuperOneClick, opened the program, and clicked [Root], (after connecting USB to droid, and turning on debugging), and it froze at Stage 2. How do i fix this, and what could cause it?
Im not sure if the cable im using is a charging cable ,or a data cable. i didnt think it would matter, but anyway, how can i tell, and would this cause it?
When i tried the quickbootroot, i opened the .bat file, the disclaimer came up, i hit [y] and enter, and it just went away- nothing happened...
I also ran the usb drivers exe on the computer (i hope this was right), and nothing happened from it neither.
What did i do wrong, and how do i fix this problem? I just want to root my device already...
No matter what I do, I cannot get the LG Support Tool to recognize my phone being plugged into the PC. I'm trying to do the new baseband install.
Running Win7 x86, already have the necessary files installed, getting to the last portion of the update, where LG support has to boot up, and it keeps telling me to install the driver.
I've downloaded the driver from the LG site, I already have the Nvidia driver installed on this PC. I plug in my phone and i see the P999 in the Device section of Manage Computer, has an exclamation point next to it so I search for driver automatically, no luck.
I don't know what the issue is.
dont do it automatically do it manually... and next time just post this in a thread already pertaining to this kind of stuff, less clutter the better.
mt3g said:
dont do it automatically do it manually... and next time just post this in a thread already pertaining to this kind of stuff, less clutter the better.
Click to expand...
Click to collapse
I've tried it manually, but no LG USB driver i've installed gives me a folder, it always is an EXE file.
Screw it, was reading that the phone needs a valid T-Mobile sim card. But my IMEI is blocked....sooooo this wont work for me.
Sent from my LG-P999 using XDA
watch a video on how to install it, I believe it is as easy as putting the folders in a dedicated folder (i have mine in a folder named "android") and just directing the files to the apx folder... not any .exe extensions
Are you currently running an ICS rom? I had the same issue but I flashed a rooted stock rom then I was able to get the LG tool to work. Might try that. Good luck.
The problem is that the USB driver is not recognized on my PC.
stevew84 said:
The problem is that the USB driver is not recognized on my PC.
Click to expand...
Click to collapse
I understood exactly what you meant. I had the same problem. The LG driver did not recognize my phone when I was running the Hellfire sandwich rom. The software did not detect that my phone was connected. I was beating my head on the desk trying to figure it out. Then I decided I would try restoring to a stock rom and try to pull the update. Restored to stock and no OTA update avail. So I went back to the LG software and it recognized it on stock. Still had CWM installed. All I had done was use the stock nand restore from here http://forum.xda-developers.com/showthread.php?t=1048274 If you need the file let me know and I will host it for you for a faster download.
Yatyas said:
I understood exactly what you meant. I had the same problem. The LG driver did not recognize my phone when I was running the Hellfire sandwich rom. The software did not detect that my phone was connected. I was beating my head on the desk trying to figure it out. Then I decided I would try restoring to a stock rom and try to pull the update. Restored to stock and no OTA update avail. So I went back to the LG software and it recognized it on stock. Still had CWM installed. All I had done was use the stock nand restore from here http://forum.xda-developers.com/showthread.php?t=1048274 If you need the file let me know and I will host it for you for a faster download.
Click to expand...
Click to collapse
Alright well thanks.
Hey Guys
I tried searching and saw a few people with my issue but no real solution. I just got a One S coming from Sprint (Evo4g) and enjoy the One S except for the no SD card thing. I have no issue connecting my phone to my windows 7 machine as a disk drive, but I have 2 computers at work with XP and both do not recognize my phone. I get a "USB device not recognized" message on my taskbar and when I click it, there is no driver installed for my phone. Same thing with both XP machines. OK, so I search the internet for an HTC USB driver, cant find one ANYWHERE, a few sites that seemed to have had them have removed them. HTC website is missing the One S support page entirely right now, awesome. So after I clicked around while I eventually found a link for HTC Sync software and tried installing that. Still no driver was installed and cannot connect that way either. At a loss here, any advice? If so does anyone have any links for actual things to install that can fix this issue?
Feel like a newb here but coming from the EVO i am very familiar with rooting, installing ROMs etc so find it hard to believe this is so difficult.
Thanks!
David
really nothing after a few days?
dskater411 said:
really nothing after a few days?
Click to expand...
Click to collapse
Maybe no one uses XP when there is nothing wrong with Windows 7 but if you rooted already you use Flash Image GUI for flashing boot.img then you wont need a PC to install a rom.
Good morning everyone.
First of all I want to apologize for my english, that I'm afraid it's very poor.
My question goes next: I bought an used Samsung Galaxy tab 2 7'' p3100 3G and it has a very big problem. It can't be connected to any pc, windows or mac. It's not a drivers' problem, so when the device is connected, the pc does nothing. Not even a display in the device manager, or a noise. However, it usually charges. I say usually because sometimes the icon battery shows a red ray, but it charges spending more time. That's all. It has been proved with three different original cables in several computers running different SO.
I don't know if it's a connector problem or it's a Rom one. It has an operator locked SO with Android 4.0.4 that not even shows the OTA update option in the menu. And I cannot select the way I want to be connected by usb in the "Storage" options.
The fact is I cannot update the device and I cannot root it in order to install a better rom or an original stock one.
I've googled all I can do to find a way for rooting the device, but all the roads drive me to the same point: Odin. The software I cannot use because my device can't be connected to any Pc.
I know this forum is my last chance. There are some ways like z4root or framaroot that work in another devices (Galaxy S for example, I think), but they have not been ported to my device. I think my chances are to make it by an apk o perhaps flashing a signed file from the original recovery.
I just need to install a simple clockword mod or having the device temporary rooted to install and run the Odin's apk that allows me to install a pre-rooted rom, an open recovery... Just a simple step for one man, But the Colorado's Canyon for me in my situation.
If someone of you know any solution or want to help me, I'll be truly grateful. And I didn't even mind to pay him for his help.
Thank you very much in advance.
Even_Flow said:
Good morning everyone.
First of all I want to apologize for my english, that I'm afraid it's very poor.
My question goes next: I bought an used Samsung Galaxy tab 2 7'' p3100 3G and it has a very big problem. It can't be connected to any pc, windows or mac. It's not a drivers' problem, so when the device is connected, the pc does nothing. Not even a display in the device manager, or a noise. However, it usually charges. I say usually because sometimes the icon battery shows a red ray, but it charges spending more time. That's all. It has been proved with three different original cables in several computers running different SO.
I don't know if it's a connector problem or it's a Rom one. It has an operator locked SO with Android 4.0.4 that not even shows the OTA update option in the menu. And I cannot select the way I want to be connected by usb in the "Storage" options.
The fact is I cannot update the device and I cannot root it in order to install a better rom or an original stock one.
I've googled all I can do to find a way for rooting the device, but all the roads drive me to the same point: Odin. The software I cannot use because my device can't be connected to any Pc.
I know this forum is my last chance. There are some ways like z4root or framaroot that work in another devices (Galaxy S for example, I think), but they have not been ported to my device. I think my chances are to make it by an apk o perhaps flashing a signed file from the original recovery.
I just need to install a simple clockword mod or having the device temporary rooted to install and run the Odin's apk that allows me to install a pre-rooted rom, an open recovery... Just a simple step for one man, But the Colorado's Canyon for me in my situation.
If someone of you know any solution or want to help me, I'll be truly grateful. And I didn't even mind to pay him for his help.
Thank you very much in advance.
Click to expand...
Click to collapse
Have you manually installed the drivers? If not, download the samsung drivers, install and try again. Read through the link below to find the drivers.
http://forum.xda-developers.com/showthread.php?t=2510669
cwyman said:
Have you manually installed the drivers? If not, download the samsung drivers, install and try again. Read through the link below to find the drivers.
http://forum.xda-developers.com/showthread.php?t=2510669
Click to expand...
Click to collapse
Unfortunately yes. I've tried with several versions of Kies, by installing manually the drivers and it doesn't work. The fact is I connect the device and the pc does nothing. Not even the device manager shows a new device or is alterated in some way. It's like one data pin in the connector was damaged or the rom was corrupted and it doesn't let the device be recognized.
I think my only chance is to make everything inside the device. By sd in the boot manager or with an apk. If not, I'm condemned to an obsolete device that could not even be updated.
Thanks for trying to help me.
Even_Flow said:
Unfortunately yes. I've tried with several versions of Kies, by installing manually the drivers and it doesn't work. The fact is I connect the device and the pc does nothing. Not even the device manager shows a new device or is alterated in some way. It's like one data pin in the connector was damaged or the rom was corrupted and it doesn't let the device be recognized.
I think my only chance is to make everything inside the device. By sd in the boot manager or with an apk. If not, I'm condemned to an obsolete device that could not even be updated.
Thanks for trying to help me.
Click to expand...
Click to collapse
This may sound absurd, but try a different version of the drivers. I had to install like a dozen drivers before it worked
mirzafran said:
This may sound absurd, but try a different version of the drivers. I had to install like a dozen drivers before it worked
Click to expand...
Click to collapse
I agree. The drivers can be so touchy. I'd uninstall and reinstall drivers numerous times before giving up. Good luck!
Sent from my GT-p511x
your cable is faulty. Get another one on ebay cheap.
I'm afraid I've tried with three different cables, as I said (one of them original from Samsung and new), two Windows Pc's, one mac and about fifteen different drivers.
Believe me: I've rooted with no problem more than twenty different devices (and jailbreaked another ones ) and this is the first time I cannot make it.
Think it's a hardware problem or a corrupted rom one. In both cases I have to root it by an apk or a flash from the sd.
Anyway, I appreciate very much your help, boys.
Even_Flow said:
I'm afraid I've tried with three different cables, as I said (one of them original from Samsung and new), two Windows Pc's, one mac and about fifteen different drivers.
Believe me: I've rooted with no problem more than twenty different devices (and jailbreaked another ones ) and this is the first time I cannot make it.
Think it's a hardware problem or a corrupted rom one. In both cases I have to root it by an apk or a flash from the sd.
Anyway, I appreciate very much your help, boys.
Click to expand...
Click to collapse
I'm in a similar situation with a Galaxy Tab 2 p3113tsyxar
It is not recognized by any computer, and my next step is to try another cord manana. Until then (hopefully) I've got a nice paperweight.
You have not rooted ur tab till now......so u have not played with your firmwares! So its better to visit a samsung store. If you have warranty then they will do it in free.(And your android will also get updated!)
If I helped you, just press thanks!
Hey! I don't know if this is the right place, but I'll try to explain my problem.
Yesterday I got a notification of an update(think it's 6.0.0 (MRA58N)). Today, when I tried to install it I just got an "Error!" message.
I tried to reboot the phone, but nothing happened. It doesn't turn on. However, I can get it into that fastboot screen or what it's called.
Haven't had any problems before, and Im kind of a beginner on these technical issues regarding phones.
So could someone please explain what I should do(hopefully nothing to complicated).
Thanks!
That sounds like a rooted phone. Is it? Have you owned the phone from new, or is it second-hand?
dahawthorne said:
That sounds like a rooted phone. Is it? Have you owned the phone from new, or is it second-hand?
Click to expand...
Click to collapse
It was new when I bought it (april 2014). I have only installed updates when getting a notification on the phone. I got a notification to do an update yesterday. Did it today. But while updating it just stopped and said "Error!". Turn the phone off, tried to turn it on but nothing happened.
What's the easiest way to make the phone work again?
Have in mind that Im not experienced at all with these stuff . Never had had any problems before
Thanks
Were you already on a version of Marshmallow? They are both version 6.0.0 regardless of the name (MRA58K/N).
Was there any message apart from just "Error"? Do you remember what it looked like?
I take it that you have enough battery?
I have no idea of the answer, just trying to get some clues.
(Oh, and at worst you can probably flash a new ROM. Don't get too worried just yet... )
dahawthorne said:
Were you already on a version of Marshmallow? They are both version 6.0.0 regardless of the name (MRA58K/N).
Was there any message apart from just "Error"? Do you remember what it looked like?
I take it that you have enough battery?
I have no idea of the answer, just trying to get some clues.
Click to expand...
Click to collapse
Yes, I updated to marshmallow a couple of weeks ago.
Yes, I was on about 75% battery when trying to update.
As far as I recall it was just the android guy and a red text saying Error! (well it said Fel! because it's in swedish.)
It started to install the updates, but just stopped halfway(rough estimate).
Hmm :/
EDIT: Yes, I've asked on other forums, and they have been saying to flash(it's called taht right?) But since I'm new to this stuff, I want to check all possible alternatives first. And if I decide to do this, I'll have to feel fully prepared on what to do, don't want to screw up things even more
To give you at least some hope have a look at this thread:
http://forum.xda-developers.com/google-nexus-5/help/stuck-launching-flashstock-bat-t3244470
If you've never done any flashing before, I recommend that you install Wugfresh's Nexus Root Toolkit. It can be used to flash a new ROM, but I'm becoming more convinced that the people in these forums are right in saying that it's good to try things manually rather than relying on a toolkit. I suggest that you use the toolkit's tutorial to set up your PC with all the right drivers & programs (ADB/Fastboot) so that you're prepared for typing in the commands.
dahawthorne said:
To give you at least some hope have a look at this thread:
http://forum.xda-developers.com/google-nexus-5/help/stuck-launching-flashstock-bat-t3244470
If you've never done any flashing before, I recommend that you install Wugfresh's Nexus Root Toolkit. It can be used to flash a new ROM, but I'm becoming more convinced that the people in these forums are right in saying that it's good to try things manually rather than relying on a toolkit. I suggest that you use the toolkit's tutorial to set up your PC with all the right drivers & programs (ADB/Fastboot) so that you're prepared for typing in the commands.
Click to expand...
Click to collapse
Thanks, I'll have a look at it.
Just to be sure. A factory reset wont work, right?
I don't know - I suppose it's worth trying. But if the phone doesn't turn on, you'll have to go through the PC setup anyway so that you can work on the phone. Besides, it will come in very useful when you need to do any maintenance on the phone in future (if that's what you want).
Or is there a factory reset in stock recovery? I don't use it myself, so I don't know.
CoJonees said:
Thanks, I'll have a look at it.
Just to be sure. A factory reset wont work, right?
Click to expand...
Click to collapse
Wug's toolkit needs a fix. It will not load the new Mashmellow either
Want to learn something instead of using a toolkit to do stuff for you?
1) http://forum.xda-developers.com/google-nexus-5/general/noob-read-adb-fastboot-how-hep-t2807273
2) http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Both these threads are unavailable, possibly deleted.
Sent from my Nexus 5 using Tapatalk
beekay201 said:
Want to learn something instead of using a toolkit to do stuff for you?
1) http://forum.xda-developers.com/google-nexus-5/general/noob-read-adb-fastboot-how-hep-t2807273
2) http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Click to expand...
Click to collapse
@beekay
"Want to learn something instead of using a toolkit to do stuff for you?"
You convinced me, but I think that the NRT has a lot of great help in setting up a PC so that you can actually start learning about ADB/Fastboot manual commands.
Although I'd done some minor fastboot stuff before, I'd never done the full Monty and installed a ROM, but I found the experience strangely pleasurable...
@op found help yet :what::what::what::what: