Related
I was using my Samsung Galaxy mini ( GT-S 5570) and was using ROM manager (free) on it.
When it asked for my device.. In my desperation I chose Huawei Pulse mini. No problem. After that.. I selected 'Back up current ROM'
When I did that my phone's screen went blank.
I could not boot. I took the battery out and tried. No success.
So I connected it to my PC. The Samsung Kies software detects the phone but cannot identify it so can't upgrade firmware or anything.
I have tried all combinations to boot into recovery mode. No success.
Is there any way I could get my phone back?
Help! I really need this!
Go to samsung center
Lil'g AF
comealone said:
Go to samsung center
Lil'g AF
Click to expand...
Click to collapse
No other way? I really don't wanna do that. :\
Plus.. I had rooted my phone. My warranty is void.
I think you are kinda screwed..
Warranty void, I dont think theres a way to fix this on your own
Is there an equivalent of download mode and ODIN/Heimdall flashable stock ROM for your device?
I have a Samsung Galaxy S variant - T-Mo Vibrant, and the download mode + heimdall took me and a few of my friends out of a tight corner quite a few times.
I have the exact same problem. Odin detects my phone..but when i tried doing a pone package install, it gets stuck at "connection setup...".
I experienced the same thing as you experienced, already three days I tried to solve the problem but still can not, sha no intention to go to him tomorrow samsung sad day my heart
Get a phone insurance, then dump it in the bath for half an hour
Jokes aside, if you were able to do a quality brick, perhaps they might not be able to find out what happened?
What do you guys think about that, can he get his phone fixed under warranty
hi...
i have a Galaxy Mini S5570 or Pop.
after i used Rom Manager and backup ROM, i figured i had chose the wrong ROM
and overwrite on my ROM.
Now my phone in bad Hard Brick.
no response, cannot combo and always black.
i been searching high and low for solution and tried many.
also done the soldering part but still cannot.
could someone tell me what should i do?
my only solution is send back to Samsung service?
please let me know. appreciate and thanks.
but i guess the last resort is to send to samsung.
because once you accidently flash a rom not meant for the phone.
the hardware may work abnormal way that cause the hardware shorted
or damage.
then this damage is not revisible.
therefore only solution is to change the damage part....
now waiting for tomorrow to get the phone back from local phone repair,
and send to samsung.... no choice.
or.... if anyone have new method / attempt to try on my own???
I have the same problem.TT
use this link.. may help you...
http://forum.xda-developers.com/showthread.php?t=1167750
Well that's the reason why you need to read first and set your expectations that this might happen... If you read and carefully understand the methods of rooting/installing custom roms then you will be safe.
first gooled topic.... the rom manager cause brick for s5570 mini,,, dont use that......
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
first googled topic.... the rom manager cause brick for s5570 mini,,, dont use that......
Hi guys, I need some help here. I'm not new to this at all and have rooted TONS of phones for people and myself. Something strange just happened though. I was attempting to flash a ROM (specifically Energy HD 2.0) through CWM. The flash was unsuccessful, which happens at times, so I thought "no big deal, I'll just do a quick restore and try again or try a different one". I chose the backup I wanted to restore to, it did the restore, it said it completed successfully, so I chose reboot. When I looked at it again I realized I never saw the boot animation or anything so I checked it.....dead. The phone wouldn't boot, wouldn't go into recovery, nothing. I've pulled the battery several times, tried both the stock recovery and CWM and I get nothing but a black screened brick. I don't even get the Samsung logo. I have no idea what I could have done here. I attempted the method in this thread - http://forum.xda-developers.com/showthread.php?t=1840030. The only problem there is that I can't even get my device to go to downloading mode. I literally does nothing at all. When I connect to the PC, I get the sound of a USB device being connected, but no access to it and as far as I can tell the PC doesn't even see it. ODIN does nothing either because the device doesn't show up (it was showing up before). I'd really appreciate any help anyone can give on this as this is a brand new phone and I'd hate to think I bricked it beyond recovery somehow. Thanks in advance!
Your bricked because you flashed a rom on your verizon S3 for an international s3 variant. It's amazing you even got far enough to attempt a restore, but the damage was already done, as your nandroid was trying to run on an already corrupted system. You're up the Creek there my friend, sorry. There are links to a company that fixes them for $60, I can't remember the name, so I can't post the link, but will if I do.
---------- Post added at 04:09 AM ---------- Previous post was at 04:06 AM ----------
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Here's the link, thanks prdog for posting in thread below this one.
Stunned at the fact you made the mistake of flashing a rom from a different carrier that is a HUGE NO NO.
Sent from my Galaxy SIII
annoyingduck said:
Your bricked because you flashed a rom on your verizon S3 for an international s3 variant. It's amazing you even got far enough to attempt a restore, but the damage was already done, as your nandroid was trying to run on an already corrupted system. You're up the Creek there my friend, sorry. There are links to a company that fixes them for $60, I can't remember the name, so I can't post the link, but will if I do.
---------- Post added at 04:09 AM ---------- Previous post was at 04:06 AM ----------
Here's the link, thanks prdog for posting in thread below this one.
Click to expand...
Click to collapse
Wow. I seriously can't believe I did that. No more flashing when I'm wasted... :cyclops: Glad I'm still in the 14 days and I can swap it out as DOA. If I can't turn it on to check it, they can't either.
Wow, glad I haven't made that mistake yet. I can see how easy it would be though.
Friends don't let friends flash fried. Good lesson in there somewhere 8 guess.
Alcohol + cell phone + boredom = brick.
The only reason it happened is because instead of going straight to the XDA Android dev thread for the phone like I normally would to find a ROM, I googled "best ROM's for GS3" and the list I got apparently was written by someone overseas (I now realize looking back at the article). I just clicked a link to one of the ROMs that looked cool and the link was actually to XDA anyway so I felt fine about the whole thing. Until my phone bricked that is...
wisdroid said:
Wow. I seriously can't believe I did that. No more flashing when I'm wasted... :cyclops: Glad I'm still in the 14 days and I can swap it out as DOA. If I can't turn it on to check it, they can't either.
Click to expand...
Click to collapse
Yes, committing fraud when you made a mistake yourself it the right thing to do.
Man up and pay to get it Jtagged imo. If you can't afford to get it Jtagged, you shouldn't be flashing ROMS.
Things like this are probably the reason the bootloader was locked in the first place.
hey everyone!
yesterday, I got really tired of froyo so I said ''f$%? it, lets try to root my phone and install jelly bean, that look really slick!''
. well looks like everyone as to start somwhere..
so my problem right now, I am stuck at the custom LG logo, I cant hard reset and even my recovery boot but the menu wont pop up and simply restart my phone..
basicaly, I feel screwed right now does anybody can help me on this?
it is probably something super stupid and simple but I can'T find any solution so I decided to join this forum for a bit of support..
EDIT: my mistake, it went in the wrong section
thx a bunch!
Usually run this when I cluster f my phone
http://forum.xda-developers.com/showthread.php?t=1590523
thanks for the cue, I will also try this. and keep you posted if it worked or not..
better way to learn is to make mistakes!
http://forum.xda-developers.com/showthread.php?t=1180331
ok, most of the link to download the needed files are dead... I might have to rely on your support guys.
the http://forum.xda-developers.com/showthread.php?t=1180331 thread didnt helped enough..
Did you install the adampk rom?
Sent from my LG-P999 using xda app-developers app
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
dubmah said:
WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed
Click to expand...
Click to collapse
I say you needed to use the g2x android development forums on this site to find a suitable jb rom, not this other site. The one click method isn't very stable, so nvflash is most definitely what you need to try to get working. There are very thorough tutorials on how to get that to work. Do you know which clockwork recovery version you have installed? Should be 5.0.2.0. Once you get home, I suggest you read read read. Do as much research you can to make sure you can follow nvflash instructions to the letter. I know I personally spent about a week researching to make sure I had a solid understanding of the procedure.
I recommend getting nvflash going to get clockwork properly installed, then download a rom from xda, nowhere else. I would even say use a gb rom before trying a jb ...the jb roms are hackfest versions, so they have (from my experience) much poorer battery life, and lack hardware acceleration. Netflix and many 3d games won't work. You can use adampk or mazout's roms but they don't have working radio, i.e. no phone/SMS functionality.
Sent from my LG-P999 using xda app-developers app
dubmah said:
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
Click to expand...
Click to collapse
Boot into recovery, there should be an option to format or wipe system. Do that then flash the ROM. It won't boot if you flash it over stock.
Also, use the paranoid android rom found in the development section, same cyanogenmod base but works better.
Sent from my Nexus 7 using Tapatalk HD
great ! thx for the advices ! yeah I Will read some more first, making sure I do thing properly, for now, I will try to revert at least to my backup and wait til I know what I'm doing!
thx again, I keep you up about the progress !
progress!! .. I tried to start my phone without the battery.. my pc recognized the phone for about 10sec and then the icon disapeared and until then, nothing I plug I start there is no way I can make my pc to recognize the phone...
does this happened to anyone before?
allright! I have bean reading about the NVFlash! that help A LOT! actually it almost fixed my thing! the phone is now unbriked YAY
I just keep replying to myself incase there is another guy who dont know crap about the obvious, if it can help the thread worth it
I used this tutorial to fix things,
http://forum.xda-developers.com/showthread.php?t=1248644&highlight=nvflash+steps
My main issue was the APX driver wich wasnt installed.. now I know bit more, I still have issue but luckily things goes forward so it gave me the boost to keep working on
but I face a new problem so maybe some of you might be able to help on that new issue
I am from montreal and here in quebec we have videotron instead of t-mobile and since I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
hope it helps
dubmah said:
I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
Click to expand...
Click to collapse
What do you mean by "T-Mobile boot" and "videotron thing?"
Sent from my LG-P999
---------- Post added at 10:09 PM ---------- Previous post was at 10:02 PM ----------
Ok, wait I think I understand what you're saying now. If you can, pm the op of that thread you used to unbrick. Ask that person if you need some kind of different file in that .zip file to work on your carrier.
I remember having to use that guide to get back to stock. Glad to see you're making progress. I know it can be frustrating when devices get wacky. Good luck!
Sent from my LG-P999
hehehe sorry, I am not fully used to the right terms so I rather stay in the gray zone by using words like ''thing''
but I can now oficially say I was talking about ROMs
finally, I managed to bring back my phone to the stock mode everything seem to work!
now I can brick it again!
thx for the help!
I began to wonder if it was just a matter of changing APN settings?
Sent from my LG-P999
this, or... putting the simcard in the properly? !!
I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
Thanks,
Reffu
Hi,
same issue here. Today the touchscreen stopped working suddenly after i flashed the Android Revolution HD 5.0 Rom yesterday. However, the S-Pen is still working fine. Installing other ROMs and the Stock ROM via Odin did not help. Issue allso appears in Touch-enabled-Recovery.
I see no reason, why this should be a hardware issue, although my N8000 came back from service a few days ago, where they also replaced the screen and digitizer.
Had anyone this issue before and was abled to resolve it?
Greets
I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2
to read this as a Note 10.1 newbie is not very encouraging. are there any similar facts between all of you like
which Note model do you have
how did you jaibreak (which method)
which rom did you have before
which rom do you have now
how did you flash a new rom
...
is there a way to find out whether the touchscreen is really "dead for touch"?
This is a bit scary - my Note 10.1 is arriving today, and I plan to root it at a minimum. I actually don't mind Touchwiz all that much on my Note 2 (which is running CleanROM ACE), so I think I might just root the 10.1 for now.
So restoring completely back to stock (via Odin) doesn't fix it? That is really odd that ROM-ing this thing might cause a hardware failure...
jiggyman said:
I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?
kkretch said:
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?
Click to expand...
Click to collapse
Did anyone solve this, I'm having the same problem.
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
Just curious - did you just root, or did you root and install a ROM?
I am only rooted so far - haven't felt the need to ROM yet - partially due to worries about this happening. I bought a refurb from Best Buy and only get 90 days of warranty.
reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
If they say you got a new one, you got one. They'll tell you otherwise if there's an issue over the phone.
But I wouldn't be afraid of ROMs, but to be more diligent and wise when it comes to choosing them. It's like choosing a poisonous mushroom versus an edible one to make stroganoff or stir fry. If you know what to avoid for the next time and follow the correct process to doing the root and flashing, there will not be an issues.
This is from someone who has soft-bricked my first tablet and learned how to unbrick my SIM-less Captivate and Note 10.1. It's how you apply the method and how much attention you practice not getting stuck into these situations is what matters. Especially since I bricked my tablet via experimentation and un-bricked it on the same day with ease.
It's not some big complex deal of rocket science or something only the mere geniuses can do, its how you perceive yourself and how you act. If you believe that you will suck and brick it to kingdom come , it will happen intentionally or subconsciously.
In this case, it was a freak accident where the file/s accessed and deleted the wrong files which allowed for capacitive touchscreen use, and it should be reported to x developers if you have not done so already.
I have rooted and used the Revolution HD rom, the Rom where you customize the colors of the bar/other things, and on the Captivate, the AOKP Collective. I further customized the latter with the Xperia launcher as it zips.
Did anyone find a repair for this besides replacement? My Note 2 is doing the same thing now.
Has anyone found a fix for the touch screen not working yet??
Anyone have any ideas?
Technicians input for touch problem
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain that follows the instructions on the mod sites exactly as shown step by step will never have a problem, all those that do end up with paper weights or bricks didn't follow the instructions in numerical order.
Believe it or not even if after you have modded a rom and brought it back to standard they know it has been modded as they have a list of problems associated with repairs after roms have been modded so you are only fooling yourself they don't.
Same as the smoker that tells his Dr he has given up even though all the symptoms prove he really didn't.
So in my expert opinion if you play with modding and stuff it up why should you be eligible for a warranty claim ? The manufacturer has sold you or supplied a working item that you decided to f_ck around with and because of your stupidity expect some one else to pay for it.
I am not saying don't mod your phone with all the great roms out there but please to save yourself a lot of pain and cost some poor smuck trying to run a business in these economic times a lot of out of pocket from sending items back for replacement or warranty plus the time it takes to do all the paperwork and such, please please please read the instructions 300% or triple check you are doing everything exactly as the instructions say and you will be enjoying all the new benefits of that customised rom and laughing at all the noobs stuffing up their brand new device from not doing so.
I know this won't fix your problem but reread that last bit it was your problem as you are to clever to follow some one else's instructions
anyone have solution regarding this issue, mine have issue also, can anyone spare how to fix it without changing hardware?
---------- Post added at 06:47 AM ---------- Previous post was at 06:28 AM ----------
i hope anyone can solve my issue with touch not responding
WOW.. on TOPIC Flashing .pit might help ???
Gardum said:
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain
Click to expand...
Click to collapse
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck
erica_renee said:
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck
Click to expand...
Click to collapse
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir
popohunters said:
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir
Click to expand...
Click to collapse
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .
erica_renee said:
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .
Click to expand...
Click to collapse
thanks sir, im done the flashing with pit files+ official firmware but touch screen is still missing, is there a modem file for touch screen maybe i missed it while its in downloading process before i brick the touch screen
any hope out there?????
confused and need help
i have a n8000 , base band version N8000XXCLL1, my touch screen stoped responding while playing a game , only Spen works , tried resetting , but no help, I'm a no-voice when it comes to programing and need a step by step guide >>>> many thanks in advance for all your help
reffu said:
I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
I got the same problem after rooting my phone.... I used the following method and got ride of that Problem. ..
type this star code in in it Phone dialler *#2663#
Now you should see "TSP"
<update>
TAP on TSP ......it will take 5 seconds only....
......
NOW ENJOY ☺☺
Click to expand...
Click to collapse
i really need some help .. i have root my SGH-T999L running 4.3 but i disable the knok . i dont remember the tools i use but every thing was working fine .. i rooted it for unlocking but i find out you cant unlock it with apps in apps store ... so bring it to a unlock shop they charged me 6,000 jmd ( jamaican dollars) but i didnt unlock it .. turn off my device for a day .. when i turn it back on i notice my wifi wasnt working .. so i booted in recovery mode which is cymod ( dont remember the spelling) but my recovery is philz wiz touch ( dont remember the name )
then i wipe the device n factory reset and alot reset .. when i turn back on my device n check the imei its ( null/null ) base band unknown and service mode is empty... i really dont know what to do ... i dont ave any money to buy any software or stuff to unlock it just want some help to fix my phone please
Hi,
The best thing you can do is go back to the shop and tell them to fix it. It could be your only hope.
Here is a very informative thread for your device. Read the first few pages, and you may need to try reverting to stock... That is covered in post number 3.
http://forum.xda-developers.com/showthread.php?t=2370981
Ask any questions on any of that in the thread above.
Really though, I suggest asking the shop to fix it if you feel it was their fault, before messing with it yourself.
Good luck!
ummmmmmmmmm so what if i install back the stock firmware would that make it imei fix or the wifi to work?
Maybe, but unless you previously backup up your efs folder, which could be used to restore your imei, There's nothing much else you can do.
Flash stock, if it doesn't work, you likely need a service center.
Unfortunately that's about it. If you feel the shop messed it up, demand they fix it. That's your best option I'd say.
Ask in the thread I linked if you'd like other possible ideas.
Again, I hope it works out! ?
---------- Post added at 11:05 PM ---------- Previous post was at 11:03 PM ----------
Also note the updated link I posted, the first link was not the correct one.
just one last one quest ... what if i use galaxy_s unlock and galaxsim unlock to back up ma eps folder would that be a good thing ? because when i open ma eps folder on ma device i see : wifi , imei etc .. when open them i see files in those folders
I would ask that in the thread I linked to find out from the experts who own your device. ?
after flashing my rom to stock firmware ... i got my wifi working ... but when i check my imei it says " //00 and my bluetooth addresss is unknown
Please ask for help in the thread I linked.
We're here to help members navigate the site, not for support.
Thank you for understanding, thread closed.