Database Info

[21/11][boot21.img]acurateam versions of boot.img for optimizing speed and lagfree

Full V5 new ROM .. overclock ram fm + free 150 or 180 + no lags. PERFECT
new boot support for overclocking. Autorun overclock.
It is not necessary the terminal or insmod commands
2.1 Boot
http://min.us/mL0Uzp7aq
Rom V5
http://min.us/mLlCVsMty
recommend Wipes
This post will be aimed at different BOOT.IMG
The idea is to upload a few boot.img with different configurations and test the best so you feel your phone.
INSTALLATION
Installation is simple, these are boot from the Recovery installable ZIP.
So you only have to do this:
1 ° / Pass the ZIP to the SD
2 ° / Entering recovery mode.
3 ° / Choosing the zip and install
THERE ARE NO WIPES! WIPES IS NOT NECESSARY!! THERE ARE NO WIPES!
BOOTS ACURATEAM
Killer 1.7 + BOOT Tweaks moderate
moderate Killer minimum 100 MB Mem.
Partitions to ext4.
Kernel Original LG.
Extra download speed for all modes of telephone and wifi.
Attached to the clock speed to the minimum off-screen, that is 300 mhz.
writing speed and higher data transfer to 4096, standard is 128.
Increased speed data = writeback, with barrier = 0, no journal in ordenered.
fincionamiento Added commands for the etc / initr.d run- lowgrappes parts etc, etc.
http://min.us/mbz6cCRnE
Aggressive + BOOT 1.8 Tweaks Killer
Killer aggressive Mem least 120 megs.
Partitions to ext4.
Kernel Original LG.
Extra download speed for all modes of telephone and wifi.
Set the clock speed to the minimum off-screen, that is 300 mhz.
writing speed and higher data transfer to 4096, standard is 128.
Increased speed data = writeback, with barrier = 0, no journal in ordenered.
fincionamiento Added commands for the etc / initr.d run- lowgrappes parts etc, etc.
http://min.us/mkRnvpEJR
BOOT Super Aggressive Killer 1.9 + Tweaks (this is as I am now) Acura2201 Mem Super Aggressive Killer least 150 megs. Partitions to ext4. Kernel Original LG. Extra download speed for all modes of telephone and wifi. Attached to speeds off-screen clock to a minimum, that is 300 mhz. speed transfer of data writing and climb to 4096, standard is 128. Increased speed data = writeback, with barrier = 0, no journal in ordenered. Added commands for fincionamiento etc / run-parts initr.d lowgrappes etc, etc.
http://min.us/mdpV8IaKK
Originally Posted by acura2201
New boot for this VERSION.
It is no longer necessary to use the TasKiller. Releases Ram and has no lags ...
The average is between 130 and 180 megs of ram free ... I is functioning very well.
Tomorrow with the original.
Installing from the recovery without WIPES. Just install and enjoy .. I hope you work well with you.
Greetings to all.
LINK Boot_2.0 More RAM, No Lags, More Speed..
http://min.us/mediCx1rQ
Thanx to the acurateam!!!
AcuraTeam members:
Franlov
Davidn70mo
Flipado
Jechus
Macriv-(erchoquero)
Acura2201
If you like their rom(s) please donate to acura(team):
https://www.paypal.com/es/cgi-bin/we...fd6c338b1d9d60
Please share your results here.

Does these convert all partitions? Then don't we need a "back to ext3". Cant there be problems with other or stock ROM's otherwise?
Sent from my LG-P920 using Tapatalk

what version
vhat version is the best ?

BOOT Super Aggressive Killer 1.9 + Tweaks
Ginger AcuraTeam Europe LG Launcher V4
Edit:
Ernest05 said:
quadrant it's rubish
antutu, smartbench 2011, nenamark 2 are better than quadrant
Click to expand...
Click to collapse
I do apologise Incidentally where are your results?
Could someone run the same tests on the others Killer 1.7 + BOOT Tweaks moderate and Aggressive + BOOT 1.8 Tweaks Killer

No problems returning to old roms...
Sent from my LG-P920 using XDA App

I am using acurarom europa ginger version.
1.9 gives me lag.
1.8 so far smooth.
1.7 not tested as long as 1.8 works fine
Sent from my LG-P920 using XDA App

kidkoala_uk said:
BOOT Super Aggressive Killer 1.9 + Tweaks
Ginger AcuraTeam Europe LG Launcher V4
Click to expand...
Click to collapse
That's fast ))
Sent from my LG-P920 using XDA App

quadrant it's rubish
antutu, smartbench 2011, nenamark 2 are better than quadrant

I'll try the 1.9, because some friends told me that's the best, without lag, absolutly... (I dont know... I try now...)

I just use the game 'fruit nibja'test these 3 boot, the v1.8 is the smoothest one

Originally Posted by acura2201
New boot for this VERSION.
It is no longer necessary to use the TasKiller. Releases Ram and has no lags ...
The average is between 130 and 180 megs of ram free ... I is functioning very well.
Tomorrow with the original.
Installing from the recovery without WIPES. Just install and enjoy .. I hope you work well with you.
Greetings to all.
LINK Boot_2.0 More RAM, No Lags, More Speed..
http://min.us/mediCx1rQ

This new boot you can put with acura v4?

testina said:
This new boot you can put with acura v4?
Click to expand...
Click to collapse
Yes, no problem!
So far boot 2.0 works great!!!

testina said:
This new boot you can put with acura v4?
Click to expand...
Click to collapse
Ram and speed amazingly improved!!!
Thx
Inviato dal mio LG-P920 usando Tapatalk

For amazing speed start overclocking at:
http://forum.xda-developers.com/showthread.php?t=1355474&page=3
Benchmarks!
acurarom Europe Ginger Boot 2.0 stock speed
quadrant 3148
Antutu
5195
Smartbench 2011
productivity 2847
games 2945
acurarom Europe Ginger Boot 2.0 overclocked 1188 Mhz
quadrant 3755
Antutu
5799
Smartbench 2011
productivity 3618
games 3158

greenbat said:
For amazing speed start overclocking at:
http://forum.xda-developers.com/showthread.php?t=1355474&page=3
Benchmarks!
acurarom Europe Ginger Boot 2.0 stock speed
quadrant 3148
Antutu
5195
Smartbench 2011
productivity 2847
games 2945
acurarom Europe Ginger Boot 2.0 overclocked 1188 Mhz
quadrant 3755
Antutu
5799
Smartbench 2011
productivity 3618
games 3158
Click to expand...
Click to collapse
evening of great news. Now it's like a rocket!
Inviato dal mio LG-P920 usando Tapatalk

Acura V1 Version, I flashed Boot2.0 but I stuck "LG LOGO", I've recovered to V1 Verison's Boot.img

Full V5 new ROM .. overclock ram fm + free 150 or 180 + no lags. PERFECT
new boot support for overclocking. Autorun overclock.
It is not necessary the terminal or insmod commands
You are here
2.1 Boot
http://min.us/mL0Uzp7aq
Rom V5
http://min.us/mLlCVsMty
recommend Wipes

I've try the 1,9 verson with a froyo rom(king). When I turn on my phone it freeze on the LG's start up image. I've do a recovery with Rom manager but is the same. Please help me!

these boot are the result of a genius I have 180 MB of free RAM and very speed
Inviato dal mio LG-P920 usando Tapatalk

[Q] What governor & I/O settings do u use??

Im currently using interactiveX as governor & VR as I/O on my cm7.2 OC801...i found dat 2 to b stable and gud...but out of curiosity i wanted 2 knw wat most of ull use?

shurikndriod said:
Im currently using interactiveX as governor & VR as I/O on my cm7.2 OC801...i found dat 2 to b stable and gud...but out of curiosity i wanted 2 knw wat most of ull use?
Click to expand...
Click to collapse
Governor: SmartassV2 or InteractiveX
I/O: vr
That's the setting I have for now

successful OverClock Settings...

hello.
someone of Galaxy fit owners have problem for OC.
but someone can OC own Smart phone as good as possible too!also OC to 801Mhz!
i open this topic for insert successful OC setting contain:
OC application
Frequency "min and max"
Governer or I/O Scheduler
scaling "Deadline . performance , ... "
Current Rom
thank you.

No Frillz CPU
Min : 245 Mhz
Max : 801 Mhz
Governor : ondemand
I/O Scheduler : bfq
Current ROM : Razodroid v1.0
---------- Post added at 08:51 PM ---------- Previous post was at 08:51 PM ----------
Quadrant Score : 2042 w/ OC

lomash said:
No Frillz CPU
Min : 245 Mhz
Max : 801 Mhz
Governor : ondemand
I/O Scheduler : bfq
Current ROM : Razodroid v1.0
---------- Post added at 08:51 PM ---------- Previous post was at 08:51 PM ----------
Quadrant Score : 2042 w/ OC
Click to expand...
Click to collapse
Can you please set Min. Value to 600 for a while?
Even my fit ran well with these settings but it hardly ever touched 700 MHz, and when it did, my phone rebooted.
Sent from my Galaxy Fit @ 801Mhz- Razodroid

cm 7.2 rc5.4
No frills cpu
smartass n sio
min 245 max 763
quadrant score around 1600-1650
Hey mr lomash is ur phone stable at 801 i cant oc abve 763 phone restarts n gets stuck very often

lomash said:
No Frillz CPU
Min : 245 Mhz
Max : 801 Mhz
Governor : ondemand
I/O Scheduler : bfq
Current ROM : Razodroid v1.0
---------- Post added at 08:51 PM ---------- Previous post was at 08:51 PM ----------
Quadrant Score : 2042 w/ OC
Click to expand...
Click to collapse
wtf 2042...I have 1600 oc 763 and same settings . Are you using link2sd and app2sd?

@diavoloporco
I'm using App2SD GUI by dark tremor.
Dalvik Cache moved to sd-ext.
SD Card : Transcend 4GB Class 4
@vijay
yeah, I do get a reboot every 2-3 days but it's pretty stable otherwise.
btw Quadrant Score was taken on governor Brazilianwax/vr. I get around 1800 in ondemand mode.

Sorry for a noob qstn do we need to partition sd card n then oc inorder to get stability of phone coz i read somewhere in net..forgive me if dis qstn's already answered

nope, oc doesnt have anything to do with sdcard.

Thanks bro BTW got 1967 quadrant score with chocobread v2 using smartassv2 n sio at 748mhz abve 748 phone is not stable.

really nice

OMG got a quadrant score of 2086 on chocobread rom 748 interactve

My phone is restarting @ 763Mhz. I gave up overclocking it. I couldn't find the advantages of oc anyway.

[FIRMWARE] List of kernals by devs for Galaxy R

Ice Cream Sandwich Kernals (4.0.4) (EMMC_BUG_FIXED)
Ardatdat ICS kernel 4.1 [ICS][CWM]
Kernel v4.1 features:
- OC to 1.32Ghz, including 1.1Ghz and 1.2Ghz
- Added the tweaked deadline scheduler
- Added SIO v2 scheduler
- Fine tune the auto-brightness logic, same as previous GB kernel
- Enable NTFS, but not auto-mount (need some time to research on that)
- Only root if you have no su in /system/bin nor /system/xbin/.
- Before rooting, remove YouTube.apk (could be installed on Google Play), SecretWallpaper... in /system/app/ in order to free space for rooting
- Increase vm.min_free_kbytes to 12MB to increase stability
- tcp: Proportional Rate Reduction for TCP
Download
Click to expand...
Click to collapse
Horsepower 1.0.9 by fuss
Kernel can be used on:
Features:
- GPU at 400mhz
- CPU OC to 1.2 Ghz
- prerooted
- init.d script support enabled
- updated tegra drivers
- many governors like:
savagedzen governor
sakuractive governor
brdzilianeax governor
minmax governor
abyssplug governor
lulzactive governor
lazy governor
pegasusq governor
smartassv2 governor
scary governor
HYPER governor
wheatley governor
Changelog (1.0.9):
increase free ram to 835mb *)
overclock the gpu to 400mhz *)
enabled lower 1.2ghz oc
Download
Click to expand...
Click to collapse

Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2

vipul12389mehta said:
Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Just to bind up all the kernals in one .... and we could easily comapre ....

already we are having thread in Dev section & XDA WIKI page also for the same thing...

vipul12389mehta said:
Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
ohh sorry i'll shift it there

krookedsgr said:
ohh sorry i'll shift it there
Click to expand...
Click to collapse
Please search before creating a new thread, Reported to Justin he will decide what to do....

mj.vikram said:
already we are having thread in Dev section & XDA WIKI page also for the same thing...
Click to expand...
Click to collapse
yea sorry my mistake..

It's no worries mate. Appreciate you trying, but I will go ahead and close this for now
Thanks!
Closed.

[Q]kernel and overclock setting

What are the best settings to save battery and keep performance ? or What is the best settings to get best performence ?
and what kernels do you suggest ?

I use latest Andromadusmod kernel with cpu config: SmartassH3 & row (or smartassV2 & sio) battery is nice and performance is good

what would you suggest for a sense 4 rom ?

deanshugan said:
what would you suggest for a sense 4 rom ?
Click to expand...
Click to collapse
To sense 4 use this kernel: http://forum.xda-developers.com/showthread.php?t=1845039
Configure governor SmartassV2 and sheduler sio. Cpu speeds 1024 or 1200 are ok.
If I helped, click Thanks :good: :laugh:

Mayex said:
To sense 4 use this kernel: http://forum.xda-developers.com/showthread.php?t=1845039
Configure governor SmartassV2 and sheduler sio. Cpu speeds 1024 or 1200 are ok.
If I helped, click Thanks :good: :laugh:
Click to expand...
Click to collapse
Sorry but smartassv2 is not present in any of the kernels available there. On-demand is still ok though
Sent from my HTC Desire S

I use vipersaga 2.2.0 with amidabudha 3076 kernel. interactive and -100 uv. I can get about 2 days of battery life.