Database Info

ao i thunk i screwed up

i rooted the captivate and used superuser and root uninstaller to uninstall kobo app from my rogers captivate.
since it is the first time i used it i didnt know how to and screwed up. i pressed something and it went on to a screen which i never seen before obviously, that said a name of an app. and under grant acces, backup apk and uninstall.
i tried pressing the back button it didn't do nothing, i pressed grant access and it said access granted. then i pressed uninstall. only to realize to late that i should have pressed backup apk! DOH! big time!
the only thing i saw just before it erased is that it said something like preconfig.
and now not sure if i uninstalled something needed by the phone.
later checked the phone and all seemed to work well.
today i started getting calls going direct to voice mail till i restarted the phone, and also had sending failed when sending texts.
the only other thing i did was add a data plan today 2 days later and that is truthfully when the problems started, but i do not see how that can affect.
i did have to input a new apn for it.
please tell me if i am wrong and either data addition or new apn could somehow cause this. and if i did unistall something needed, how do i get it back now?!
thansk in advance for any assistance with this issue.

I would double check the apn settings you changed
CM7

Before anyone can help you, we need more info. Are you running 2.1 or upgraded 2.2? I am assuming 2.2 because Aldiko is the reader with 2.1, Kobo is in the 2.2 version.
Are calls still going to voicemail? You said they did until you restarted, are you now able to receive voice calls?
Outgoing texts: still unable to send? Or was that resolved with the restart? What about incoming texts?
krouri said:
the only other thing i did was add a data plan today 2 days later and that is truthfully when the problems started, but i do not see how that can affect. i did have to input a new apn for it.
Click to expand...
Click to collapse
What problems are you referring to? The two issues you spoke of or are there others? What apn did you have to add?
This information will be helpful to give you assistance.

Dont double post.
http://forum.xda-developers.com/showthread.php?t=992496
look at your thread from last night.
if you cant tell us what you deleted because you went click happy without reading what you are clicking, you are going to have to FLASH BACK TO STOCK, like i told you last night!
APN settings for rogers are also in my stock rom link in my sig.
at least last night you posted properly in Q&A

Where are you located? There seems to be a rogers outage in south central Ontario right now. I haven't had service for 3 hours.

Rogers APN info
Your APN info should read as follows:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: Internet + MMS

clemmie said:
Your APN info should read as follows:
Name: Rogers
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: Internet + MMS
Click to expand...
Click to collapse
confirmed +10

Trusselo said:
Dont double post.
http://forum.xda-developers.com/showthread.php?t=992496
look at your thread from last night.
if you cant tell us what you deleted because you went click happy without reading what you are clicking, you are going to have to FLASH BACK TO STOCK, like i told you last night!
APN settings for rogers are also in my stock rom link in my sig.
at least last night you posted properly in Q&A
Click to expand...
Click to collapse
First of all sorry! i am very new to Xda and after posting went to look for my thread but couldn't find it!
Thanks for helping last night and tonight.
it was neither at the end! i added data as i said and put in the info. and started using it. the issue was the 3G. it seems to be very sporadic. it is actually a Rogers captivate unlocked to use on Fido with lagfix v2+ running Froyo.
after a little while i remembered how my friend with an SE x8 had an issue with rf till idisabled 3G, and my other fried had same issue with Iphon 3GS. so i disabled 3G and voila! i guess i will turn on 3G only when i need it.
i thought by now 3G would be implemented good enough for this not to happen any more..
WEll thanks again to everybody here and sorry for not giving enough info.

Thread closed for double posting

Using GPS breaks my mobile data connection

Not sure if this is a ROM problem or something else. Every time I run google maps or speedtest it breaks my mobile data connection. I have to toggle mobile network off/on to get it to work again. Running Virtuous Unity 1.27.0; it happened with 1.26.0 too. Is this possibly a hardware problem? Or a ROM problem? Not sure... Has anyone had this happen?

tawalla said:
Not sure if this is a ROM problem or something else. Every time I run google maps or speedtest it breaks my mobile data connection. I have to toggle mobile network off/on to get it to work again. Running Virtuous Unity 1.27.0; it happened with 1.26.0 too. Is this possibly a hardware problem? Or a ROM problem? Not sure... Has anyone had this happen?
Click to expand...
Click to collapse
I have run both those ROM's and frequently run GPS/Google maps simultaneously with Mobile Network and never had that happen...yet....maybe your local network is dropping you....evil...

Yeah I thought that might be it, too...but it only happens when I use the GPS
I can still text and make calls, but no internet, market, speedtest....
I'm wondering if I should return to stock to see if it still happens and take it to a store

tawalla said:
Yeah I thought that might be it, too...but it only happens when I use the GPS
I can still text and make calls, but no internet, market, speedtest....
I'm wondering if I should return to stock to see if it still happens and take it to a store
Click to expand...
Click to collapse
Yeah that would bug the S out of me...wish I had more insight...mine works

Anybody else ever see this problem?
Sent from my Inspire 4G using XDA App

I've recently noticed that sometimes when I turn gps on it briefly kills my connection, but it resets itself after a few seconds. Currently running hydrog3n 1.5. Pretty sure it was happening on tpgb 627 as well.
Sent from my Inspire 4G using XDA App

Yeah, it kills mine, but it won't come back on until I manually turn it off and back on. The H icon still show up but no activity on the arrows

I'm now experiencing this too. In my case I have the RCMix V2.0 ROM. It happens with both the stock updated OTA radio and the radio/ril combo that is recommended for this ROM. It seems to only happen when the GPS is active. In other words if I use say Google maps with GPS, press Home and then run an internet app I have connection. But if I leave a GPS app (Co-Pilot Live for example) in the background with the GPS active, internet is down. Just like you I show the "H" symbol just no arrows for data. If anyone else has an insight please shout...

Ok, don't ask me why but I found the solution. It's simply having multiple APN's. I had originally created a second APN as per the instructions in someone else's thread to get higher data speeds. Well, after a search on the internet yielded this idea I copied the MMS settings from the original APN to my new one, deleted the old one and Voila, GPS and data now live happily together. Weird...

TexasPenguin said:
Ok, don't ask me why but I found the solution. It's simply having multiple APN's. I had originally created a second APN as per the instructions in someone else's thread to get higher data speeds. Well, after a search on the internet yielded this idea I copied the MMS settings from the original APN to my new one, deleted the old one and Voila, GPS and data now live happily together. Weird...
Click to expand...
Click to collapse
So you have one or two APN's now? It might be useful if you could to post your exact settings.

Just one APN now...
Settings are:
Name: MediaNet (But doesn't matter)
APN: Phone
MMSC: http://mmsc.cingular.com
MMS Proxy:wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,admin.mms
Everything else not set..

TexasPenguin said:
Just one APN now...
Settings are:
Name: MediaNet (But doesn't matter)
APN: Phone
MMSC: http://mmsc.cingular.com
MMS Proxy:wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,admin.mms
Everything else not set..
Click to expand...
Click to collapse
Hmmm. Well glad it works for you. I am fairly sure that setup would not work for me. My data plan requires two APN's. I've verified this multiple times. I just tried this since I just flashed a new ROM and was in setup...dismal failure...restored the second APN and hitting 5.5 down out of the box.

[APN config] Beta testers wanted for new APN configuration procedure

Hello everyone,
This thread is for those of you who have manually edited their APNs to increase data speeds. In my APN thread, every once in a while I see a complaint where the user says the "Phone" APN (which is the 2nd APN) will not stay selected. Historically I've been telling people to reboot their phone and try again, or try adding a 3rd APN (for some reason when a 3rd APN is entered, the 2nd one will usually stick). I have seen this problem myself. There may be a more elegant and effective way to prevent this issue, which is what this new thread is all about.
I took another look at the default APN config in the stock updated ROM (the OTA HSUPA update that came out at the end of April), and noticed that the "Phone" APN (which is the APN that provides the faster speeds in some markets) is listed first. As most of you already know, this APN is missing from all custom DHD/Inspire ROMs, which is what prompted this procedure in the first place. For simplicity, my APN procedure (up until now) has been telling people to just add the "Phone" APN as the 2nd one. Speed wise, it doesn't matter which order the APNs are in, just as long as the "Phone" APN is selected and stays selected, but some people have trouble with the selection reverting back to the 1st (slow) APN, sometimes later on without their knowledge. In this new procedure that is listed below, it tells how to delete all your APNs so you can start from scratch, and then add the fast "Phone" APN first, to ensure it will always be selected since it is listed first. The 2nd APN is merely for MMS. This APN layout is the same as the stock ROM.
This procedure "should" work on all ROMs, but that's why I'm asking for beta testers to see what problems arise. I want to get some feedback before officially updating my APN thread in the dev section. Anyone that performs this beta procedure and provides feedback, I will click on their "thanks" button.
Standard warnings apply: make a nandroid backup before making this change, etc. Messing with your APNs is messing with your data connection, but everyone should know that already.
Step 1. Delete all APNs:
Press Menu button --> Settings --> Wireless and networks --> Mobile networks --> Access Point Names
Press the left side of your 1st APN to go into the settings of this APN, then press Menu>>Delete APN.
Repeat this process for any other APNs you have. The goal is to delete all APNs so we can start from scratch.
Now do the next steps in the same order as below:
Step 2. Create a new APN (Menu>>New APN) with these settings, everything is case sensitive. This will be your 1st APN:
Name: MEdiaNet
APN: Phone
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: default,admin (notice there is no space on either side of the comma)
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save. You will now be back at the initial APN screen.
Step 3. Create a new APN (Menu>>New APN) with these settings. This will be your 2nd APN:
Name: MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cinguar.com
MMS port: 80
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: mms,supl (notice there is no space on either side of the comma)
APN protocol: IPv4
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save.
You will now be back at the initial APN screen again. Make sure the 1st APN (named MEdiaNet) is selected (via the round radio button on the right side). Your data connection will drop for a few seconds.
We're done. Let me know if you have any problems. If for some reason you notice your speeds are slower or faster, this is due to the normal wide variance in AT&T network speeds. If you were already using the custom APN config, there is absolutely no reason why this APN config would slow you down or speed you up; all we're doing is changing the order of them.
If you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default". Or worst case scenario, simply restore your nandroid backup.
Confirmed working: Virtuous Unity, CM7, NINJA-0706, HoneyGen

If you posted this yesterday, I would've been first in line to experiment. But I've finally stabilized my data speeds after countless days & hours of tweaking (using your methods, and others I've found around here).
Have you ever experimented with [email protected] (as opposed to [email protected])? This has given me better speeds, both when I was stock and on a custom ROM.
EDIT: I've read through your entire thread and don't remember if someone else had the same problem or not. When using the two APNs method, my connection would drop temporarily (always reconnected within a few seconds though) sometimes. Is this something you've seen happen?

Ill give this a shot! Always helping people out
Sent from my Inspire 4G using Tapatalk

I will give this a try after work and report back.
Sent from my Inspire 4G using XDA App

I can do this. I am currently running Virtuous Unity 1.27.0 on my Inspire but am willing to test on Inspired Ace or ClearDroid as well.
Sent from my Inspire 4G using the power of the dark side.

Simba501 said:
If you posted this yesterday, I would've been first in line to experiment. But I've finally stabilized my data speeds after countless days & hours of tweaking (using your methods, and others I've found around here).
Click to expand...
Click to collapse
No worries. As the old saying goes, "don't fix what ain't broke". Especially if the road to stability was a long one.
Have you ever experimented with [email protected] (as opposed to [email protected])? This has given me better speeds, both when I was stock and on a custom ROM.
Click to expand...
Click to collapse
I just tried it and saw no difference. In theory, this shouldn't affect anything speed wise, since this username is only located in the APN used for MMS (when using the dual APN config). Maybe you've been experiencing the normal crazy AT&T speed inconsistencies, and it was just a coincidence that your speeds were faster when using the alternate username? Just a thought.
EDIT: I've read through your entire thread and don't remember if someone else had the same problem or not. When using the two APNs method, my connection would drop temporarily (always reconnected within a few seconds though) sometimes. Is this something you've seen happen?
Click to expand...
Click to collapse
Personally I've never seen this issue. My phone doesn't normally drop its connection, regardless whether I'm on 1 or 2 APNs (unless I'm in a very low signal area of course). Sounds like your ROM didn't like having its APNs messed with, or something else was going on. Hard to tell.
Thanks for your feedback BTW.

@XAviierG, bcd420, biglittlegato - thanks guys!!!
biglittlegato, if you're willing to test on multiple ROMs then go for it! I won't stop you. I'll thank you every chance I get.

Rockin the new settings now. Will try mms next. Coverage is spotty here, will know more once I get her back home.
Edit: mms works. So far data is much slower. Will try next to the good tower after work.
Sent from my Inspire 4G using the power of the dark side.

biglittlegato said:
Rockin the new settings now. Will try mms next. Coverage is spotty here, will know more once I get her back home.
Edit: mms works. So far data is much slower. Will try next to the good tower after work.
Sent from my Inspire 4G using the power of the dark side.
Click to expand...
Click to collapse
Cool, thanks for the update. This new APN layout definitely shouldn't cause any slowdowns, so you were probably just experiencing some slowness in your area.

henrybravo said:
Cool, thanks for the update. This new APN layout definitely shouldn't cause any slowdowns, so you were probably just experiencing some slowness in your area.
Click to expand...
Click to collapse
Where I work I bounce from 0-4 bars of EDGE to 0-2 bars of HSPA while sitting still. There is a tower in town where I typically get 3 to 4 mbps down and have seen as high as 5.5 down. My typical uploads are 1 to 1.5 mbps. Since the APN change I am getting 500 kbps down with 150 kbps up. I'm sitting about 3 miles from the good tower. I'll report back after I run some tests closer to the good tower. I figure I'll run this setup for a couple of days and then try again with a different rom.
Sent from my Inspire 4G using the power of the dark side.

Working just as it should on ninja0706.
Sent from my Inspire 4G using XDA App

Good speeds now. About 1/4 mile from the good tower.
Sent from my Inspire 4G using the power of the dark side.

I just installed ClearDroid 1.1.4 and I don't think this is going to work. The first APN is locked (wap.cingular) and there is no way to delete it. Nothing happens when you press menu, just the keyboard from a long press of it.

biglittlegato said:
I just installed ClearDroid 1.1.4 and I don't think this is going to work. The first APN is locked (wap.cingular) and there is no way to delete it. Nothing happens when you press menu, just the keyboard from a long press of it.
Click to expand...
Click to collapse
Yeah I forgot that some ROMs have a locked APN, so this procedure will only work on the less restrictive ROMs. Thanks for checking though.

[Q] T-Mobile USA Data APN Settings for Sensation?

After changing ROMS, I've noticed my data speeds have slowed down quite a bit and I am doing a little troubleshooting to try and figure out the problem. I'm still on the stock radio. Would someone be kind enough to post what the default data APN settings loaded on the Sensation are for T-Mobile USA? Thanks!

tjdouble07 said:
After changing ROMS, I've noticed my data speeds have slowed down quite a bit and I am doing a little troubleshooting to try and figure out the problem. I'm still on the stock radio. Would someone be kind enough to post what the default data APN settings loaded on the Sensation are for T-Mobile USA? Thanks!
Click to expand...
Click to collapse
Bump! I need this too!

Default APN Configuration as follows. If an options is not listed, the value is <Not Set>
Name: T-Mobile Data
APN: epc.tmobile.com
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,hipri

bryancruise said:
Default APN Configuration as follows. If an options is not listed, the value is <Not Set>
Name: T-Mobile Data
APN: epc.tmobile.com
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,hipri
Click to expand...
Click to collapse
Awesome, Thanks!

bryancruise said:
Default APN Configuration as follows. If an options is not listed, the value is <Not Set>
Name: T-Mobile Data
APN: epc.tmobile.com
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,hipri
Click to expand...
Click to collapse
So, I'm flashing a bunch of different apps trying to figure this thing out. I loaded the latest MIUIJB and still my mobile data was jumping in and out, quickly.
In the APN settings, I noticed my "Type" was different than the above. My "Type" just said "default,supl,mms" When I added "admin,dun,hipri" it connected. Maybe coincidence? Dunno. Now I'm flashing back to Bruce's CM10 (9/28). Will check then...hopefully it'll be the fix for my specific situation (yes, I'm dreaming...).
UPDATE: Installed Bruce's CM10 (9/28) and mobile data is still working...APN "type" is listed as "default,supl,mms" only.

thepza said:
So, I'm flashing a bunch of different apps trying to figure this thing out. I loaded the latest MIUIJB and still my mobile data was jumping in and out, quickly.
In the APN settings, I noticed my "Type" was different than the above. My "Type" just said "default,supl,mms" When I added "admin,dun,hipri" it connected. Maybe coincidence? Dunno. Now I'm flashing back to Bruce's CM10 (9/28). Will check then...hopefully it'll be the fix for my specific situation (yes, I'm dreaming...).
UPDATE: Installed Bruce's CM10 (9/28) and mobile data is still working...APN "type" is listed as "default,supl,mms" only.
Click to expand...
Click to collapse
It's probably a coincidence.
I will tell you that I've had the data problem with the Type set at default,supl, admin,hipri,mms
The only thing different in this version is adding 'dun'. I just did that too for kicks because I'm curious about any possible fix. But I'd bet that it's either just a coincidence that the data just started working for you after that or what really fixed it was that you messed with the APN settings at all which forced the connection with the tower to reset. I've had that same issue where I've messed with APN settings and data mysteriously started working again too.
But keep testing data for 10-14 days and see if you get the instability again. I will too. If we don't then the 'dun' setting is the key.
I don't think we'll find that's the ultimate sollution thought.

Skipjacks said:
It's probably a coincidence.
I will tell you that I've had the data problem with the Type set at default,supl, admin,hipri,mms
The only thing different in this version is adding 'dun'. I just did that too for kicks because I'm curious about any possible fix. But I'd bet that it's either just a coincidence that the data just started working for you after that or what really fixed it was that you messed with the APN settings at all which forced the connection with the tower to reset. I've had that same issue where I've messed with APN settings and data mysteriously started working again too.
But keep testing data for 10-14 days and see if you get the instability again. I will too. If we don't then the 'dun' setting is the key.
I don't think we'll find that's the ultimate sollution thought.
Click to expand...
Click to collapse
Did adding "dun" seem to help you at all?
My data was working perfectly fine when I re-flashed 9/28 (and it only had "default,supl,mms") but then I got greedy and flashed 10/1. Data is back on the fritz...

thepza said:
Did adding "dun" seem to help you at all?
My data was working perfectly fine when I re-flashed 9/28 (and it only had "default,supl,mms") but then I got greedy and flashed 10/1. Data is back on the fritz...
Click to expand...
Click to collapse
My data wasn't broken at the time I added the 'dun'. So I have no idea if it helped or not. I try to save these 'fixes' until my data breaks to see if any show immediate results but I didn't this time.
Flashing the new build has triggered the break fro me in the past, but it comes back within a few hours.
What shouldn't happen when you flash an update (if you don't do a full wipe) is changes to your APN settings. Whatever changes you made on 9/28 should still be there on 10/1

Skipjacks said:
My data wasn't broken at the time I added the 'dun'. So I have no idea if it helped or not. I try to save these 'fixes' until my data breaks to see if any show immediate results but I didn't this time.
Flashing the new build has triggered the break fro me in the past, but it comes back within a few hours.
What shouldn't happen when you flash an update (if you don't do a full wipe) is changes to your APN settings. Whatever changes you made on 9/28 should still be there on 10/1
Click to expand...
Click to collapse
Bad timing for me to test this stuff...going out of town tomorrow and will definitely need mobile data this week. Senseless Revolution, here I come.

thepza said:
Bad timing for me to test this stuff...going out of town tomorrow and will definitely need mobile data this week. Senseless Revolution, here I come.
Click to expand...
Click to collapse
I keep a nandroid backup of Hyper NonSense ready to be restored on my SD Card for emergancies.
It won't have my latest text messages or anything but I can flash to it and have working mobile data in 3 minutes in an emergancy. And it only costs me 1GB of SD card space.
If you take the time to set that up once, you don't have to worry about flashing a fresh install of a Sense ROM and setting up your accounts and apps later.

[Q] Mobile Data - Disconnected on HTC One X

[RESOLVED] I just flashed the latest Clean ROM 6 R2 on my Rogers HTC One X and my Mobile Data is Disconnected even though it says 4G in the status bar with full reception. I also receive calls just fine.
I could not attach my screenshot but you can see the screenshot from this link
I wanna try turning off LTE and keep the connection on 3G only, but can't find the option to do that either
Screenshot
Anyone else having this problem? Any insight on this issue would be nice as I love this ROM!

Hey! I just un-soft-bricked my phone only to run into this problem too! BUT I have fixed it! Seemed the APN was wiped for me and is probably the same for you. I added the following APN and boom, all fixed! LTE, 3G, w/e you want! This had all the settings here Hope this gets things running for you too!

sixalive said:
Hey! I just un-soft-bricked my phone only to run into this problem too! BUT I have fixed it! Seemed the APN was wiped for me and is probably the same for you. I added the following APN and boom, all fixed! LTE, 3G, w/e you want! This had all the settings here Hope this gets things running for you too!
Click to expand...
Click to collapse
THANK YOU SO MUCH!! I waited all day to see an MMS! Totally made my day!

Just a heads up, that fix I posted was buggy for me as that doesn't actually include the proper Rogers LTE settings so I had random disconnects during today. Hopefully you're not, but if you notice your connection to be spotty pm me and I can send you my updated apn setting for rogers LTE network.

Just a heads up, I am also having this issue and it seems to be with any AT&T based rom. I have a telus one x. Added Telus APN and flashing different radio did not fix my problem. I tried both clean rom V6 R2 and an AT&T stock rom. I have flashed viper without issues and Original Android roms work fine. I notice a few people having this issue and some seem to be able to resolve by adding APN while others cannot resolve the issue. I'm at work right now so I can't do much testing but I will when I get home this evening. If anyone else has anything to add or perhaps if someone knows how to fix the issue, you're two cents is welcome!
Thanks!
*Edit* It seems as though my issue was being caused due to TWRP 2.4 not wiping properly so I went back to 2.3.3 and did a clean wipe/flash and all works fine after entering APN settings.

COMPLETE FIX FOR THIS PROBLEM (worked for me):
sixalive said:
Name: Rogers LTE
APN: ltemobile.apn
MMSC: http//mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MMS protocol: WAP 2.0
MCC: 302
MNC: 720
APN type: *
Bearer: Unspecified
Click to expand...
Click to collapse
After setting the above APN settings, your data should work. But in my case, I kept loosing signal frequently at random. The following step fixed that for me:
1. Dial *#*#4636#*#*
2. Select Phone Information
3. Under Set preferred network type: Select GSM auto (PRL)
Now my reception will go as low as one bar but it will never cut
Hope this helps!

HTC One X data disconnected problem
sixalive said:
Just a heads up, that fix I posted was buggy for me as that doesn't actually include the proper Rogers LTE settings so I had random disconnects during today. Hopefully you're not, but if you notice your connection to be spotty pm me and I can send you my updated apn setting for rogers LTE network.
Click to expand...
Click to collapse
I have reset my phone and updated the APN setting given above but still the persists. Please help