[modem] ei22 (May not work)[odin] - Epic 4G Android Development

Dumped by me
This doesn't work as the current dumping method doesn't work. C'mon samfirmware!
DOWNLOAD: http://dev-host.org/kq1uwdc2a4pf/modem.bin

Woah, does this mean I can odin Ei22 modem when I am on EH17?

I'll be the first to say "this won't flash". Because it won't. Unfortunately, you cannot dump modems from CDMA devices - period. Unless you have a shiny new method, in which case, please post it.

k0nane said:
I'll be the first to say "this won't flash". Because it won't. Unfortunately, you cannot dump modems from CDMA devices - period. Unless you have a shiny new method, in which case, please post it.
Click to expand...
Click to collapse
Oh darn... I just dd'd the modem partition...

yup the only way we will see the full modem.bin is from a stock tar or if some one finds a different way to get it (many have tried and all have failed)

Shut, I was gonna try something too!
Sent from justlovejoy's Epic 4g powered by The GreenRomProject.com & SpinBackEntertainment.com
Let's Go NYG NYJ

Rodderik said:
yup the only way we will see the full modem.bin is from a stock tar or if some one finds a different way to get it (many have tried and all have failed)
Click to expand...
Click to collapse
/thread 10char

Related

All Modems CWM3 Flashable [WIP]

Alright, after taking a look at the vibrant forums, i noticed that they have CWM3 flashable modems, so it must be possible.
I extracted the tar file of an EC05 Modem and of course, all that's inside is the .bin file. I extracted a modem from the vibrant's 'old' cwm3 flashable files. I also found a batch operation that makes update zip files flashable via cwm3. with some guesswork and a little luck, I created two EC05 Modems, the first is my attempt, and the second is with a few extra files that i think are responsible for modems installing via cwm exclusively. Anyway, I'll keep you guys posted on my success. (hopefully not brick) If all goes well, I want to create CWM Flashables of all of our modems. wish me luck.
Edit: No dice with the ones I made.. Still looking for a way.
This would make it a lot easier to switch modems. Hopefully you can figure it out and not brick your phone! Thanks.
Greater men have tried, flashing modems us usually done with bmlwrite or redbend_ua. But they don't work for us...modem is always corrupted or something. But, if you get this working, I shall eat my words lol
sent from my miui-ified epic
Hmm
ugothakd said:
Greater men have tried, flashing modems us usually done with bmlwrite or redbend_ua. But they don't work for us...modem is always corrupted or something. But, if you get this working, I shall eat my words lol
sent from my miui-ified epic
Click to expand...
Click to collapse
Yeah, they all seem to be using redbend_ua... I'm looking around and some say there are working and 'non-working' versions of redbend_ua..
Aha,
I've found a different method for flashing modems & i believe to be a working one, but i need to gtalk with an experienced dev or tester, as suggested in this thread.
http://forum.xda-developers.com/showthread.php?t=1290485
What is your method? I've tried it all...if you can pm me cwm flashables are easy
sent from my miui-ified epic
The thoughts were to actually flash a modem you needed source. When EC05 first came out some ROMs would update your modem from DK28 or EB13. This why all the leaked ROMs had to be Odin'd. It would be awesome if you found a method that worked on the Epic for those who can't get their phone to connect on the computer.
I just want to say Good Luck, and we're all counting on you!
Sent from my SPH-D700 using XDA App
I found a cwm deodexed eg22 zip on my desktop. Its setup slightly different from Deca's deodex cwm or other cwm roms I've seen. Its very blunt and straightforward with eg22 modem bin in it. I thought if there was a way to eliminate factoryfs with the flash still going through, it'd be around 30mb cwm flash, however I do not kno what is dispensable in the files. I'm thinking dummy files or somehow omitting most of the flash except the modem?
You should be able to delete all but the modem and the flash script right? Did not know there was any ROM that successfully flashed a GB modem.
kennyglass123 said:
You should be able to delete all but the modem and the flash script right? Did not know there was any ROM that successfully flashed a GB modem.
Click to expand...
Click to collapse
I think hes talking about a different galaxy s?...
I'm talking about the CWM flashable EG22 Deodexed I had found weeks back ago, ever since I cwm flashed that, I've been on EG22 baseband.. surprisingy I don't see a script anywhere...
Just an update, I'm halting any work until my BB cables come in.. I can't risk it with Samsung's Stock Cable.. computers don't recognize it anymore, much less odin. Lol they should be in Oct 11 the soonest, Oct 14 the latest.
i tried this a long time... i went many routes... the modem is protected and not flashable unless in download mode, bc its in nvram.. the flashable ones are just deltas, they load the differences then apply them on reboot..
chris41g said:
i tried this a long time... i went many routes... the modem is protected and not flashable unless in download mode, bc its in nvram.. the flashable ones are just deltas, they load the differences then apply them on reboot..
Click to expand...
Click to collapse
That's too bad. Odin scarees the crap outta me every time. When I had my lappy it was fine but when I got a dual core desktop it started giving me a lot of problems and soft bricks
Sent from my SPH-D700 using xda premium
chris41g said:
i tried this a long time... i went many routes... the modem is protected and not flashable unless in download mode, bc its in nvram.. the flashable ones are just deltas, they load the differences then apply them on reboot..
Click to expand...
Click to collapse
What's wrong with that
xboxfanj said:
What's wrong with that
Click to expand...
Click to collapse
We don't have deltas.
ugothakd said:
We don't have deltas.
Click to expand...
Click to collapse
Nor do we have a way to create deltas at this point (in case anyone intends to ask)
Sent from my SPH-D700 using XDA App
How do samsung updates do that? Ef02 to ef10 updated modem, and all other updates. They do it in recovery, so we shud be able to also
xboxfanj said:
How do samsung updates do that? Ef02 to ef10 updated modem, and all other updates. They do it in recovery, so we shud be able to also
Click to expand...
Click to collapse
They have the delta. We don't...
xboxfanj said:
How do samsung updates do that? Ef02 to ef10 updated modem, and all other updates. They do it in recovery, so we shud be able to also
Click to expand...
Click to collapse
They wrote the software that applies the delta, as well as the software that generates the delta... It's their proprietary format, do they have all of the specs because they created them...
Edit: to be accurate, I can't say they wrote every piece of the delta system (I don't know everything, trying not to come across like I think I do, lol). But they have components we don't, that they haven't shown an interest in releasing
Sent from my SPH-D700 using XDA App

[ROM] [CWM] [EC05] [EI22] Stock Heimdall Packages

Please see this new thread for up to date packages.
http://forum.xda-developers.com/showthread.php?t=1584346
DISCLAIMER:
The whole point of putting out Heimdall packages is to make flashing safer, faster and easier but please use some common sense and read before you wildly click on stuff. No one listed in this OP nor myself, God, Satan or any other being (Supreme deity or not) is responsible for what you do with these files. If you brick something, you did it, so man up and own your mistakes (and hopefully learn from them).
Epic Heimdall Packages:
The title should be self explanatory. Use these with Heimdall to flash your Epic back to stock or to flash CWM recovery. Do NOT re-partition unless you have an absolute good reason to (Like coming back from MTD and you know EXACTLY what you are doing). 99% of the time you will NOT need to re-partition.
Thanks to:
Nubecoder for putting these packages together
Drockstar and Rodderik for putting the purple CWM 3.1.0.1 together
Rodderik for hosting the devphone.org (Primary site and file mirror)
All I did was xfer some files and host the unlimited download server (files.devphone.org).
Heimdall Info and Download:
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-0-and-anti-squish-graphical-update/
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-1-released/
http://www.glassechidna.com.au/products/heimdall/
Primary Links (unlimited monthly xfer):
See New Thread
Mirror Links (limited monthly xfer, please use primary 1st):
See New Thread
Big thanks to insanity213 for hosting the files for me (would cause too much BW on my server).
Now everyone can stop using Odin!!!
NOTE:: The EI22 package does not include the ei22 modem.
Also, there are no bootloaders in these packages, so I do not think you should ever re-partition with these.
=]
nubecoder said:
Now everyone can stop using Odin!!!
Click to expand...
Click to collapse
THIS.
(ODIN sucks)
I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk
stilesja said:
I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I've got a late 2006 24" iMac kickin around the basement. I'll fire it up later on tonight and see if I can get it to roll.
so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?
diptenkrom said:
so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?
Click to expand...
Click to collapse
That is correct.
How come in the EI22 Package the pit file says EC05?
jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
the pit hasn't changed
jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
Rodderik said:
the pit hasn't changed
Click to expand...
Click to collapse
^ this.
Just a name, and FYI the pit was ripped from my phone with Heimdall.
=]
Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?
Shadomastr said:
Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?
Click to expand...
Click to collapse
No root, just stock.
=]
I've not once been able to get Heimdall to work on my windows xp machine, any suggestions?
Is this deodexed I'm looking for a stock rooted deodexed tar
Sent from my SPH-D700 using xda premium
So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!
Digglez said:
Is this deodexed I'm looking for a stock rooted deodexed tar
Click to expand...
Click to collapse
They are not modified, so no, not deodexed.
pjnofrills said:
So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!
Click to expand...
Click to collapse
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]
nubecoder said:
They are not modified, so no, not deodexed.
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]
Click to expand...
Click to collapse
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?
pjnofrills said:
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?
Click to expand...
Click to collapse
Yes it includes the stock recovery.
And yes you would want to keep the EI22 modem (since you already have it).
=]
Thank you for this. I finally got around to un-rooting / returning my wife's phone to stock. Now I can take it into the Sprint store. This should be the default method to return rooted phone to stock in the wiki, as it is quite easy if you follow the Heimdall instructions.
Can this be used to go back to BML from MTD instead of Odin? I'm guessing not since we can't repartition but wanted to make sure.

bootloaders! aka fix the rainbow garbage on awesome rom leaks

ok i see since it has been so long since all the rogers development started people dont really remember about all the rainbow problems and how they were fixed and how the fix needs source code.
we now have bootloaders available in leaks from samsung. they are needed with the stock kernels that come in the leaks to avoid rainbow garbage. i am providing the bootloaders to be flashed in heimdall without having to flash a whole rom.
i would like to make this explicitly clear that if this bricks your phone i am not to blame. there is a significant risk when flashing bootloaders! though the infuse seems to have safety measures i strongly recommend only flashing once. and if your phone becomes a brick you will need to solder things to the phone to fix it via j-tag or adam outlers unbrickable mod. be cautious! dont flash boot.bin without sbl.bin, dont flash sbl.bin without boot.bin, dont mix up the partitions, and if the phone bricks i dont want to know about it unless you want to pay me to fix it!
heimdall package
http://www.multiupload.com/GXUTF4QCJX
odin package (untested)
http://www.multiupload.com.... REMOVED May be failing to flash. very dangerous situation...
bootloaders for heimdall to be added through the "flash" tab (unzip first! ibl/pbl-boot.bin, sbl-sbl.bin)
http://www.multiupload.com/NAIA23JZL1
good luck!
Thanks for posting this. Hopefully it will help out with leak questions that tend to get asked over and over again.
Sent from my SAMSUNG-SGH-I997
Yeah. Thanks for posting, Dani.
do you know if there its any difference in bootloaders amongst different gingerbread leaks?
I have been running the first leaked gingerbread's bootloaders since Prezkit gave them to us and have had zero issues. I think it was kk1? I've been taking an "if it ain't broke" stance. its going good!
MattSoRaven said:
Yeah. Thanks for posting, Dani.
do you know if there its any difference in bootloaders amongst different gingerbread leaks?
I have been running the first leaked gingerbread's bootloaders since Prezkit gave them to us and have had zero issues. I think it was kk1? I've been taking an "if it ain't broke" stance. its going good!
Click to expand...
Click to collapse
there is difs. but I couldn't tell you what. I saw posts by Linux bozo who did binary diferencials but I don't see any difference.
I know the bootloaders have a counter for customer kernels. if you flash the parameters.ifs from the ultimate unbrick it resets it. I also know they changed the galaxy s 2 bootloaders so it was harder to reset the counter so don't expect to be able to reset it when the official update comes along. I also have been using the "if it ain't broke " theory and honestly don't remember which I am using. the packages here are uckk3. if people can test if the counter can still be reset by flashing param.ifs let me know. ill post older bootloaders if it can't otherwise I can't think of any reason to pick one over another.
If i am flashing the bootloaders via odin does the .tar file go in the pda slot. thank you for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
bigbadwolf311 said:
If i am flashing the bootloaders via odin does the .tar file go in the pda slot. thank you for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
yes. that's how I would do it. the PDA slot seems to be automatic as far as partition sorting. the phone slot is for modems but if a modem is included in a package for the PDA slot it flashes just fine. the bootloaders are in the PDA packages normally so that's how I would do it.
please report results because I don't run windows and did not test that package.
I will report back once i get around to flashing the bootloaders. Thanks again for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
Dani897 said:
there is difs. but I couldn't tell you what. I saw posts by Linux bozo who did binary diferencials but I don't see any difference.
I know the bootloaders have a counter for customer kernels. if you flash the parameters.ifs from the ultimate unbrick it resets it. I also know they changed the galaxy s 2 bootloaders so it was harder to reset the counter so don't expect to be able to reset it when the official update comes along. I also have been using the "if it ain't broke " theory and honestly don't remember which I am using. the packages here are uckk3. if people can test if the counter can still be reset by flashing param.ifs let me know. ill post older bootloaders if it can't otherwise I can't think of any reason to pick one over another.
Click to expand...
Click to collapse
I've been using the UCKJ2 bootloaders since they came out with no issues.
Entropy512 said:
I've been using the UCKJ2 bootloaders since they came out with no issues.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I997 using xda premium
bigbadwolf311 said:
I will report back once i get around to flashing the bootloaders. Thanks again for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Wonder if u can give me directions for the odin method. Should i put it in download mode like im flashing back to stock? Can i Flash this over a custom rom?
schmidtty661 said:
Wonder if u can give me directions for the odin method. Should i put it in download mode like im flashing back to stock? Can i Flash this over a custom rom?
Click to expand...
Click to collapse
don't select repartition, no need for a pit, the rom shouldn't matter, the file should go in the PDA slot. remember I haven't tested it in Odin. I don't run windows and have little interest in using Odin for anything. phone needs to be in download mode just like flahong a rom. it should only take a second or two to flash. good luck
Cool i should be able to figure this out. Thanks for the quick response.
It didn't work. I had auto restart, f.reset and the PDA slot checked after i opened the file in the PDA slot and after clicking start it just sat at setup for 45 min until i gave up and flashed back to stock. I had to pull the cord while in download mode and the screen turned black with green dots so i had to flash blindly. I tried it twice and the same thing. Has anyone else tried this?
schmidtty661 said:
It didn't work. I had auto restart, f.reset and the PDA slot checked after i opened the file in the PDA slot and after clicking start it just sat at setup for 45 min until i gave up and flashed back to stock. I had to pull the cord while in download mode and the screen turned black with green dots so i had to flash blindly. I tried it twice and the same thing. Has anyone else tried this?
Click to expand...
Click to collapse
I have a bunch of downloads but nobody reported anything at all till now.
ill pull the Odin version for now. try it in heimdall. its not any harder to use.
Can you post an odin package.
I had an Odin package. I got a few downloads, didn't get any people thanking for it, didn't get any positive feedback that it worked and had one user report problems, see the last couple posts. I pulled the file for lack of evidence that it worked. I don't run windows and prefer heimdall so I haven't tested it in Odin. sorry but I suggest you either flash an entire rom leak then flash a non secure kernel through Odin ( any custom kernel should do also flashing back to stock should also do just fine) and then flash a rom or learn heimdall which works on windows as well as Mac and Linux. I would have done a oneclick package but it still requires the installation of the heimdall back end and I figured it was really no harder to just use the heimdall package system.
any chance of relink thats not at multiupload?
edit: disregard, found a workaround. might be useful in future tho.

Android 4.0.3 ROM leaks for Galaxy Note...can we cherry pick?

Hey All,
Just read that the Note got a 4.03 leak http://mobilesyrup.com/2012/04/04/android-4-0-3-rom-leaks-for-samsung-galaxy-note/
The article says that "call quality is better and LTE signal is stronger" as reported by " some users"...
Am I correct that the note has enough similarities that DEVs here can cherry pick the good stuff (probably including their modem)?
Jamie
robinsonj said:
Hey All,
Just read that the Note got a 4.03 leak http://mobilesyrup.com/2012/04/04/android-4-0-3-rom-leaks-for-samsung-galaxy-note/
The article says that "call quality is better and LTE signal is stronger" as reported by " some users"...
Am I correct that the note has enough similarities that DEVs here can cherry pick the good stuff (probably including their modem)?
Jamie
Click to expand...
Click to collapse
You stole my name! My name is Josh Robinson!
R4INS said:
You stole my name! My name is Josh Robinson!
Click to expand...
Click to collapse
LOL... I'm probably older so I had it first! ;-)
robinsonj said:
LOL... I'm probably older so I had it first! ;-)
Click to expand...
Click to collapse
I'm 96. Jk 27.
But seriously I want to try their modem for att. Ours sucks.
try it and report back
Here are the modems extracted from the I717 UCLC5 one click if anyone is willing to flash them on a skyrocket.
https://hotfile.com/dl/151936386/9f5b553/SGH-I717-UCLC5-modems.7z.html
Don't attempt to flash this directly, it's not an update zip!
cschmitt said:
Here are the modems extracted from the I717 UCLC5 one click if anyone is willing to flash them on a skyrocket.
https://hotfile.com/dl/151936386/9f5b553/SGH-I717-UCLC5-modems.7z.html
Don't attempt to flash this directly, it's not an update zip!
Click to expand...
Click to collapse
I'll give it a shot after work (if I can get an ICS ROM successfully installed), but what's the install method if not CWM?
Can't look at the page to see if it's an Odin right now 'cause "Network Storage" is blocked here at the office.
Jamie
robinsonj said:
I'll give it a shot after work (if I can get an ICS ROM successfully installed), but what's the install method if not CWM?
Can't look at the page to see if it's an Odin right now 'cause "Network Storage" is blocked here at the office.
Jamie
Click to expand...
Click to collapse
It's just a zip of the two modems files from the I717 ICS ODIN tars. Easiest way to flash would be to push them to /sdcard and then use an adb shell to write them:
Code:
su
dd if=/sdcard/amss.bin of=/dev/block/mmcblk0p13
dd if=/sdcard/mdm.bin of=/dev/block/mmcblk0p17
reboot
Make sure to backup your current modems or have the ICS one-click handy if you need to go back to the stock modems.
Got an ICS booted. Now I'll try the Note modem
OK I got Silver ICS working (sort of). A newer CWM (touch) made the difference and I was able to break out of the boot loop and wipe the caches and up came ICS.
As soon as I get it to settle down (couple reboots and maybe a kernel flash I'm guessing) from buzzing and force closes every time I do anything I'll try the UCLA5 modem from the Note.
Jamie
These att?
Please God let them work. I can't handle our ics leak radio any longer!
Well it doesn't look like I'm going to get to try the UCLA5 modem... I just can't get this ICS ROM to stop giving me "acore" FCs... every buttion I touch sets off another. I assume acore is Andriod Core? Whatever it is I need a more stable flavour of ICS before testing a modem or any test would be meaningless.
Going to restore my stock GB and call it a night because I don't want to be stuck without my phone all day tomorrow. Maybe I'll take a stab at it again on the weekend if I find a ROM that seems more solid on my phone.
R4INS said:
These att?
Please God let them work. I can't handle our ics leak radio any longer!
Click to expand...
Click to collapse
Have you tried blaze 4g ics radio?
-----------
sent from my calculator with android
jose makalolot said:
Have you tried blaze 4g ics radio?
-----------
sent from my calculator with android
Click to expand...
Click to collapse
Nah was under the assumption that's T-Mobile. Am I wrong?
cschmitt said:
It's just a zip of the two modems files from the I717 ICS ODIN tars. Easiest way to flash would be to push them to /sdcard and then use an adb shell to write them:
Code:
su
dd if=/sdcard/amss.bin of=/dev/block/mmcblk0p13
dd if=/sdcard/mdm.bin of=/dev/block/mmcblk0p17
reboot
Make sure to backup your current modems or have the ICS one-click handy if you need to go back to the stock modems.
Click to expand...
Click to collapse
pushed them over, they work. Will test for a few days and see if its any of an improvement.
Here's a CWM flashable zip of the UCLC5 modems if anyone is interested.
https://hotfile.com/dl/151949512/13934d8/modems-UCLC5.zip.html
cschmitt said:
Here's a CWM flashable zip of the UCLC5 modems if anyone is interested.
https://hotfile.com/dl/151949512/13934d8/modems-UCLC5.zip.html
Click to expand...
Click to collapse
Make a thread, i have already seen an improvement in data, and in the responsiveness of the signal bars. I was pulling in data with 1 bar, sending texts, and mms. The ICS skyrocket radio wouldnt do crap with 3!
cschmitt said:
Here's a CWM flashable zip of the UCLC5 modems if anyone is interested.
https://hotfile.com/dl/151949512/13934d8/modems-UCLC5.zip.html
Click to expand...
Click to collapse
You have a md5 for this?
xcrazydx said:
You have a md5 for this?
Click to expand...
Click to collapse
Yes, pulled them out of the one click exe. You need them?
I didn't use the zip crazy I pushed them with adb so I can't confirm the zip.
Sending and getting texts and mms on one bar!
R4INS said:
I didn't use the zip crazy I pushed them with adb so I can't confirm the zip.
Sending and getting texts and mms on one bar!
Click to expand...
Click to collapse
I just flashed them using the modems-UCLC5.zip, worked fine. Not sure if data is better, but it's certainly not worse. Will run with them for awhile and see how it goes.

Rogers Infuse Full Rom

I recently have a problem with my Rogers infuse. I searched the internet, and even ask this via PM from another person who have the same problem, but no solution. Here is my problem:
During one of my recovery attempts, I flashed a ATT ROM using Odin which also includes the infuse.pit file. After that, the initial logo of ROGERS which was shown in the beginning is gone. I later installed ROGERS rom, but the logo is still not there.
I had full nandoird backups before that, but restoring none of them solved the problem. Is it possible for one of the people who have a ROGERS infuse to create a full back (using heimdall) and share the .pit file and the different partitions (mainly non system and non data partitions)?
I could not find any complete ROGERS rom. Although there are some complete ATT roms (such as SGH_I997-UCKE3-Stock-Noboot-One-Click ), there is no one for ROGERS.
utfrazier said:
I recently have a problem with my Rogers infuse. I searched the internet, and even ask this via PM from another person who have the same problem, but no solution. Here is my problem:
During one of my recovery attempts, I flashed a ATT ROM using Odin which also includes the infuse.pit file. After that, the initial logo of ROGERS which was shown in the beginning is gone. I later installed ROGERS rom, but the logo is still not there.
I had full nandoird backups before that, but restoring none of them solved the problem. Is it possible for one of the people who have a ROGERS infuse to create a full back (using heimdall) and share the .pit file and the different partitions (mainly non system and non data partitions)?
I could not find any complete ROGERS rom. Although there are some complete ATT roms (such as SGH_I997-UCKE3-Stock-Noboot-One-Click ), there is no one for ROGERS.
Click to expand...
Click to collapse
I believe you can use any of the ATT STOCK Firmware but under the APN, just put in Roger's network for connection.
Roger's natively start at 2.3.3 GB.
Some of the Roger's users may have a stock version around in cyberspace
qkster said:
I believe you can use any of the ATT STOCK Firmware but under the APN, just put in Roger's network for connection.
Roger's natively start at 2.3.3 GB.
Some of the Roger's users may have a stock version around in cyberspace
Click to expand...
Click to collapse
Thanks for your reply. However, as I said, my problem is not the ROM. I installed a ATT Full recovery ROM that includes the .pit file, and I think a series of partitions other than system and data. So although I reinstall a Rogers ROM, I still have no initial ROGERS logo in boot up, and instead, it shows a random series of lines. I have no other problem in the functionalities of the phone.
utfrazier said:
Thanks for your reply. However, as I said, my problem is not the ROM. I installed a ATT Full recovery ROM that includes the .pit file, and I think a series of partitions other than system and data. So although I reinstall a Rogers ROM, I still have no initial ROGERS logo in boot up, and instead, it shows a random series of lines. I have no other problem in the functionalities of the phone.
Click to expand...
Click to collapse
that's because you flashed an att param.ifs. you must have used a froyo unbrick package. i dont know if there is a rogers dump with param.ifs but there are captivate threads (old ones) that have tools to change that splash screen and i have heard it works on the infuse but the mod never became popular around here. if i were you i'd flash an att rom and modem with a custom kernel,(better camera performance, and better battery life) change the apn and then change the splash and boot animation to something cool! unless of coarse you are worried about the warranty. if you are worried about insurance just report the thing missing...
Dani897 said:
that's because you flashed an att param.ifs. you must have used a froyo unbrick package. i dont know if there is a rogers dump with param.ifs but there are captivate threads (old ones) that have tools to change that splash screen and i have heard it works on the infuse but the mod never became popular around here. if i were you i'd flash an att rom and modem with a custom kernel,(better camera performance, and better battery life) change the apn and then change the splash and boot animation to something cool! unless of coarse you are worried about the warranty. if you are worried about insurance just report the thing missing...
Click to expand...
Click to collapse
I tried to flash att roms, but they never boot after flash. That was why I return to Rogers rom, and now I am using ICS. Could you provide more detail about those splash screen changing tools? And also, is there anyone here with an Rogers Infuse that can send me the param.ifs file from his phone?
Mine's a Rogers Infuse and I'm sure at one point I used an unbrick package that changed my splash screen from Rogers to At&t.
If I remember correctly, I used Odin and a "return to stock" which brought back my Rogers splash screen.
I'll try and track down the package I used...
*edit* try this: http://forum.xda-developers.com/showthread.php?t=1193927
prairied0gg said:
Mine's a Rogers Infuse and I'm sure at one point I used an unbrick package that changed my splash screen from Rogers to At&t.
If I remember correctly, I used Odin and a "return to stock" which brought back my Rogers splash screen.
I'll try and track down the package I used...
*edit* try this: http://forum.xda-developers.com/showthread.php?t=1193927
Click to expand...
Click to collapse
Thanks for the link. I had tested this one. It did not solve my problem. I think that my phone's param.lfs partition is overwritten by something else. I am mainly searching for for a heimdall stock. Is it possible for you to create a backup using heimdall, and send it to me?
utfrazier said:
Thanks for the link. I had tested this one. It did not solve my problem. I think that my phone's param.lfs partition is overwritten by something else. I am mainly searching for for a heimdall stock. Is it possible for you to create a backup using heimdall, and send it to me?
Click to expand...
Click to collapse
I'll take a look and see what I can come up with - I've never used Heimdall before, only Odin.
prairied0gg said:
I'll take a look and see what I can come up with - I've never used Heimdall before, only Odin.
Click to expand...
Click to collapse
Heimdall for one click is great, but get with jedi master qkster he can provide....
prairied0gg said:
I'll take a look and see what I can come up with - I've never used Heimdall before, only Odin.
Click to expand...
Click to collapse
Hey, pd0gg.
We can try to put together a heimdall for Rogers' users.
If you have odin'ed to rogers stock, flash an insecure gb kernel (bedwa, zen, entropy..doesn't matter which one) and run adb or terminal to get access to system files.
this shows you how to dump the partition:
http://forum.xda-developers.com/showthread.php?t=1348392
from adam's op:
su
#Mount The /system folder as RW so we can read and write to it
mount -o remount,rw /system /system
#Make our folder to write the firmware package onto the SDCard
mkdir /sdcard/firmwarepackage
#Begin transfer of all relevant blocks to sdcard
dd if=/dev/block/stl9 of=/sdcard/firmwarepackage/factoryfs.img bs=4096
dd if=/dev/block/bml7 of=/sdcard/firmwarepackage/zImage bs=4096
dd if=/dev/block/stl10 of=/sdcard/firmwarepackage/dbdata.img bs=4096
dd if=/dev/block/stl11 of=/sdcard/firmwarepackage/cache.img bs=4096
dd if=/dev/block/bml12 of=/sdcard/firmwarepackage/modem.bin bs=4096
#Done
echo done
Use the lines above. The other parts doesn't apply.
Pull the pit file from the unbrick or any of the 1 click package.
Make up the 1click from the op.
The other option would be to pull the data from the odin tar and put them into a 1 click
As Dani897 has stated though, I think it's really pointless as the Roger's Firmware is inferior. No hdmi or Hd video etc...using the att firmware, change out the boot screen and add roger's apn is a better idea.
qkster said:
Hey, pd0gg.
We can try to put together a heimdall for Rogers' users.
If you have odin'ed to rogers stock, flash an insecure gb kernel (bedwa, zen, entropy..doesn't matter which one) and run adb or terminal to get access to system files.
this shows you how to dump the partition:
http://forum.xda-developers.com/showthread.php?t=1348392
from adam's op:
su
#Mount The /system folder as RW so we can read and write to it
mount -o remount,rw /system /system
#Make our folder to write the firmware package onto the SDCard
mkdir /sdcard/firmwarepackage
#Begin transfer of all relevant blocks to sdcard
dd if=/dev/block/stl9 of=/sdcard/firmwarepackage/factoryfs.img bs=4096
dd if=/dev/block/bml7 of=/sdcard/firmwarepackage/zImage bs=4096
dd if=/dev/block/stl10 of=/sdcard/firmwarepackage/dbdata.img bs=4096
dd if=/dev/block/stl11 of=/sdcard/firmwarepackage/cache.img bs=4096
dd if=/dev/block/bml12 of=/sdcard/firmwarepackage/modem.bin bs=4096
#Done
echo done
Use the lines above. The other parts doesn't apply.
Pull the pit file from the unbrick or any of the 1 click package.
Make up the 1click from the op.
The other option would be to pull the data from the odin tar and put them into a 1 click
As Dani897 has stated though, I think it's really pointless as the Roger's Firmware is inferior. No hdmi or Hd video etc...using the att firmware, change out the boot screen and add roger's apn is a better idea.
Click to expand...
Click to collapse
Thank-you, qkster! I very much appreciate you taking the time to help.
I'll give it a whirl and see what happens.
prairied0gg said:
Thank-you, qkster! I very much appreciate you taking the time to help.
I'll give it a whirl and see what happens.
Click to expand...
Click to collapse
Thank you guys. I will wait to see if it can help me.
With it being a long weekend I'm likely going to be away from my computer til Tuesday.
I have the files we need I just need to package then into a one-click.
prairied0gg said:
With it being a long weekend I'm likely going to be away from my computer til Tuesday.
I have the files we need I just need to package then into a one-click.
Click to expand...
Click to collapse
If you run into problems, let me know.
It is usually advisable to try it before you post it.
For the record, I'm not keen on flashing Roger firmware on my native att Infuse.
Gl
qkster said:
If you run into problems, let me know.
It is usually advisable to try it before you post it.
For the record, I'm not keen on flashing Roger firmware on my native att Infuse.
Gl
Click to expand...
Click to collapse
The one-click has been generated; however, I have not had a chance to test it. It's been a busy day and I simply ran out of time.
As an aside, I had never even looked at Heimdall until I responded to this thread. I can see now why folks use it and recommend it
prairied0gg said:
The one-click has been generated; however, I have not had a chance to test it. It's been a busy day and I simply ran out of time.
As an aside, I had never even looked at Heimdall until I responded to this thread. I can see now why folks use it and recommend it
Click to expand...
Click to collapse
Thanks for your help. Any update? Can you upload it to somewhere?
utfrazier said:
Thanks for your help. Any update? Can you upload it to somewhere?
Click to expand...
Click to collapse
I'm sorry, no update yet. Usb drivers are giving me grief so I've still not managed to test it.
I do have it uploaded but, because it is still untested, I am reluctant to give the url.
---------- Post added at 05:58 PM ---------- Previous post was at 05:45 PM ----------
utfrazier said:
Thanks for your help. Any update? Can you upload it to somewhere?
Click to expand...
Click to collapse
Okay, got the usb things sorted out and just finished flashing. Everything looks a-okay.
Here's the link:
https://docs.google.com/open?id=0B8hYM72TRTvzZzh0ZHplZFBjOTA
Or here:
http://db.tt/l1Y0LgXM
*edit* I should note, this is not a complete return to stock as it is rooted.
prairied0gg said:
I'm sorry, no update yet. Usb drivers are giving me grief so I've still not managed to test it.
I do have it uploaded but, because it is still untested, I am reluctant to give the url.
---------- Post added at 05:58 PM ---------- Previous post was at 05:45 PM ----------
Okay, got the usb things sorted out and just finished flashing. Everything looks a-okay.
Here's the link:
https://docs.google.com/open?id=0B8hYM72TRTvzZzh0ZHplZFBjOTA
Or here:
http://db.tt/l1Y0LgXM
*edit* I should note, this is not a complete return to stock as it is rooted.
Click to expand...
Click to collapse
If this works as intended, we may want to link this to the Rogers thread or Big Joe, you may want to ISet this
Sent from my SAMSUNG-SGH-I997
If so...shot me post in the iset page, plz so don't forget...
Sent from my SAMSUNG-SGH-I717 using xda premium
Ya, hopefully this helps utfrazier out and if so I would be happy to see it linked to from the Rogers thread or a mention in iset.

Categories

Resources