Database Info

[ROM][STOCK UVKD1 - FLASHABLE] T959VUVKD1 Zip File

So after a bit of work I was able to decrypt the encrypted file from the fus.samsungmobile.com site. The result? The stock zip able to be flashed to your device to put it on UVKD1.
Mostly I did this because of people who may have problems with Kies Mini to update to UVKD1 (like I did, took forever to get drivers etc and kies to behave).
Again this is completely stock! Nothing done to it. I did use Kies Mini to apply this update automatically, but again it's the unencrypted zip that gets flashed to your phone.
As always, I'm not responsible for bricking your device etc. etc.
I imagine this can be used via ODIN to update your device, but again I haven't gone through this process.
As I have not tested this method personally, I cannot guarantee anything. Just wanted to provide the STOCK Zip without the encryption on it.
Anyone more knowledgeable about this please feel free to interject.
Stock UVKD1 ZIP
http://www.multiupload.com/NW7XF9XQYT

Omg KD1 awesomeee u hope they fix the SMS issues and some of the other issued the sgs4g had.
thanks man you rule.
I'm downloading it to try it
Inside the zip there is a .tar.nd5 file would I be able to flash it with Odin like the other .tar that we have around?
Sent from my SGH-T959V using XDA App

Zixx said:
Omg KD1 awesomeee u hope they fix the SMS issues and some of the other issued the sgs4g had.
thanks man you rule.
I'm downloading it to try it
Inside the zip there is a .tar.nd5 file would I be able to flash it with Odin like the other .tar that we have around?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
That's what I figure. No PIT as far as I know either.
I imagine following the ODIN guide is the proper way to flash this stock KD1 http://forum.xda-developers.com/showthread.php?t=1001759.

joedeveloper said:
That's what I figure. No PIT as far as I know either.
I imagine following the ODIN guide is the proper way to flash this stock KD1 .
Click to expand...
Click to collapse
Well lets give it a try in the name of well trying to get the newest Rom a try Xd. The only thing I'm wondering is what does that .DLL does
Sent from my SGH-T959V using XDA App

Flashing Works good and flawless no issue.

arahma said:
Flashing Works good and flawless no issue.
Click to expand...
Click to collapse
Did u flash using odin or using recovery?

I used odin 1.3, 512.pt and no partition.

Has anyone tried flashing this with a rooted phone that also has the bootanimation change applied? I just don't want to brick my phone lol.

arahma said:
I used odin 1.3, 512.pt and no partition.
Click to expand...
Click to collapse
You used a .pit file and had no issues??

Heimdall worked on this. And (in a fit of insanity), I had Deodexed KC1, flashed the 4 files right over KC1.
Its booting fine.
(Update - it's booted. Now I have to go through rooting it...again).

sgyee said:
Heimdall worked on this. And (in a fit of insanity), I had Deodexed KC1, flashed the 4 files right over KC1.
Its booting fine.
(Update - it's booted. Now I have to go through rooting it...again).
Click to expand...
Click to collapse
LOL I know what you mean. Word is there will be a deodexed version of this fairly soon

Anyone else get SuperOneClick with RITC exploit to work with KD1? I can't.

sgyee said:
Anyone else get SuperOneClick with RITC exploit to work with KD1? I can't.
Click to expand...
Click to collapse
use psneuter I don't use rage, and i think in the latest version it's been taken out.

joedeveloper said:
use psneuter I don't use rage, and i think in the latest version it's been taken out.
Click to expand...
Click to collapse
Cool. It's rooted again. So, at least the normal tools work fine.
Now, I'm going to play with it. See what (if any) is different. Likely - nothing.

sgyee said:
Cool. It's rooted again. So, at least the normal tools work fine.
Now, I'm going to play with it. See what (if any) is different. Likely - nothing.
Click to expand...
Click to collapse
only thing I noticed was that the pattern lockscreen now has the emergency button at the bottom centered below the pattern. It's fairly smooth, seems like mostly bug fixes based on the release notes.
I'd really be curious to find out what the OTA url is for this, but not sure anyone here is going to get the OTA, cause we're probably all rooted or that and KC1 won't.
However, if anyone does wanna logcat and then get the OTA eventually that would be cool.

deodexed version is coming soon!

chadster214 said:
deodexed version is coming soon!
Click to expand...
Click to collapse
Awesomeness!!!
Hopefully we get a Nice Boot animation with the Deodexed Version I hate the Pink Boot animation thingy

chadster214 said:
deodexed version is coming soon!
Click to expand...
Click to collapse
Cool! That's gonna be nice.

This was awesome.
I thought i had to redo my homescreens, my contacts, etc.
But everything stayed the same.
Thanks!
EDIT:
Meh, it seems i still can't send picture messages...

MarkP80nj said:
This was awesome.
I thought i had to redo my homescreens, my contacts, etc.
But everything stayed the same.
Thanks!
EDIT:
Meh, it seems i still can't send picture messages...
Click to expand...
Click to collapse
Maybe coverage? I just sent a picture message with out any problems.

[HOW-TO]EXT4 on GummyCharged1.9RC1 (EP1Q)

http://rootzwiki.com/showthread.php?t=3163
this thread is now null and void lol. for anyone that wants it, kejar released his own updated Cwm version of gummycharged. follow the link above for his ext4 lagfix instructions.

Does this work? Anyone try?

works, nice write up too
blazing through on my VZ Droid Charge 4G

awesome thanx for figuring it before i had to try a thousand combonations...

This is awesome!

How long should it stay at Samsung after doing all of the steps? I did all of the steps. Samsung flashed several times. Now its just staying at Samsung. Been this way for a couple of minutes.

sdcard issues
ok, first of all I did this and everything worked fine.
Upon first reboot, I think it went 4 or 5 times through the samsung bootloop and then loaded the rom (i wasn't watching it fastidiously).
Upon loading the rom and loading my apps from titanium backup, I finally hit the issue of not being able to move apps to the sd card; it just comes up with "failed to move application". I've rebooted just to make sure things weren't off from first boot. It's still not letting me move any apps to sd (even if allowed in the os).
Any ideas on what to try next?

I'm still at Samsung logo. Don't think its going to load the Rom. Not sure what I'm doing wrong. Following the steps. This is the second time I've tried this.

NM, figured it all out.
Going to give it a shot shortly.

This failed to work 3 times. Going back to RFS Gummy.

did anyone else lose ROOT access after booting up?
I used Imnuts' EP1Q hacked kernel flashable via CWM.
I went to TB and it said I didn't have root access. Flashed superuser.zip and still no go.

evercleardoc said:
did anyone else lose ROOT access after booting up?
I used Imnuts' EP1Q hacked kernel flashable via CWM.
I went to TB and it said I didn't have root access. Flashed superuser.zip and still no go.
Click to expand...
Click to collapse
From what I have read over at Rootzwiki, that seems to be a problem exclusive to Imnuts' hacked kernel (possibly, he posted that he is looking into it as some users used his kernel and didn't have this problem). This process uses another kernel.
I was waiting for more users to give reports back, but I might just give this one a go.

PeterGunz said:
From what I have read over at Rootzwiki, that seems to be a problem exclusive to Imnuts' hacked kernel (possibly, he posted that he is looking into it as some users used his kernel and didn't have this problem). This process uses another kernel.
I was waiting for more users to give reports back, but I might just give this one a go.
Click to expand...
Click to collapse
I tested his hacked kernel and yes we ran into this issue, however flashing superuser in CWM fixed it for me... doesn't seem to work for other people so idk
blazing through on my VZ Droid Charge 4G

Hrmm. Well for the people it isn't working for, try following the guide here to at least get a good copy of EP1Q on there and working first. Then follow my process.
Sucks that the imnuts kernel isn't working right yet. I would love to have the EP1Q kernel working on this, would be much more ideal.
It breaks root for me too. Come one imnuts, i know you know what is causing it, you are a smart cookie. Put out an updated zip already lol...

skydeaner said:
Hrmm. Well for the people it isn't working for, try following the guide here to at least get a good copy of EP1Q on there and working first. Then follow my process.
Sucks that the imnuts kernel isn't working right yet. I would love to have the EP1Q kernel working on this, would be much more ideal.
It breaks root for me too. Come one imnuts, i know you know what is causing it, you are a smart cookie. Put out an updated zip already lol...
Click to expand...
Click to collapse
I've downloaded the file twice, but I keep getting MD5 hash value invalid on the Odin step for the Nameless recovery. That's as far as I could get in the steps. I tried downloading it from multiple places but no dice.

PeterGunz said:
I've downloaded the file twice, but I keep getting MD5 hash value invalid on the Odin step for the Nameless recovery. That's as far as I could get in the steps. I tried downloading it from multiple places but no dice.
Click to expand...
Click to collapse
what did you need? the nameless v2 kernel? I can upload my copy for you if I have it

anoninja118 said:
what did you need? the nameless v2 kernel? I can upload my copy for you if I have it
Click to expand...
Click to collapse
I need the Nameless recovery file for Odin from the step after flashing the GC rom in Odin.
Sent from my SCH-I510 using XDA App

I executed this method using Imnuts kernel and kept root (Thankfully). However I looked at the post to confirm EXT4, and my Terminal Emulator doesn't match the one posted at all. Right now, it's just showing data and dbdata on EXT4, the rest is still on RFS. Is this normal for GB? I can post the exact coding if needed.

PeterGunz said:
I need the Nameless recovery file for Odin from the step after flashing the GC rom in Odin.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
you mean CWM? the one for step 3?

anoninja118 said:
you mean CWM? the one for step 3?
Click to expand...
Click to collapse
Yes that's the one. If you have the correct file that would be great.
Sent from my SCH-I510 using XDA App

[MODEM][ODIN + CWM] KI3 Modem

I am not responsible if you brick your phone.
This is ONLY the modem, not a full ROM.
I take no credit for this, I only extracted the modem.bin from the KI3 ROM leak.
Here is the new KI3 modem in Odin and CWM flashable form. Simply flash with Odin, or use the CWM recovery image. Enjoy!
CWM Package: http://www.mediafire.com/?gr0ukfoezffz8bt
Odin Package: http://www.mediafire.com/?q4tvvo8a91osv91
EDIT
For those wondering I was able to flash this with both Odin and CWM with EXT4 enabled on all partitions, if it even matters I have no clue.

crackpot said:
I am not responsible if you brick your phone.
This is ONLY the modem, not a full ROM.
I take no credit for this, I only extracted the modem.bin from the KI3 ROM leak.
Here is the new KI3 modem in Odin and CWM flashable form. Simply flash with Odin, or use the CWM recovery image. Enjoy!
CWM Package: http://www.mediafire.com/?gr0ukfoezffz8bt
Odin Package: http://www.mediafire.com/?q4tvvo8a91osv91
Click to expand...
Click to collapse
Is there a benefit from this modem?

digitallure said:
Is there a benefit from this modem?
Click to expand...
Click to collapse
It's labeling is > KI1?

crackpot said:
It's labeling is > KI1?
Click to expand...
Click to collapse
Re: KI3 Modem It's labeling is KI3 !
Try to reinstall it through CWM ... Its working great for me and my sig is even stronger then before
Super happy with this modem !!!

Cheffz said:
Re: KI3 Modem It's labeling is KI3 !
Try to reinstall it through CWM ... Its working great for me and my sig is even stronger then before
Super happy with this modem !!!
Click to expand...
Click to collapse
Umm that means that its name is greater than KI1 (i.e. newer). Modem works great for me, glad it does for you.

Yes loving this modem much improved signal
Sent from my SGH-T959V using xda premium

Can i use it over 2.3.4 ROM? (Valhalla 1.1)
Sent from my SGH-T959V using XDA App

once again, you can flash any sgs4g modem on any sgs4g rom.

OK, flashed. Feel no difference.
Still much lower signal comparing to Froyo...
Sent from my SGH-T959V using XDA App

How is the kj1 modem?
Sent from my SGH-T959V using XDA Premium App

Oops wrong thread!
-Sent From My Amazing Galaxy S 4G-

this is the one everyone's using on KJ6 to bypass the plaguing 'message not sent' garbage yes?
if so, can I have a quick set of instructions on how to flash it please (like there should be in the OP)
I've got root on stock 236, I've installed/set up CWM (recovery in bin folder, zip on SD) and I've got root explorer installed..
I'm also aware of this flash tutorial, but being an Android beginner, I'm unsure if that's what we need to do for modem only..
so insight and instructions would certainly be appreciated

Not going to flame as it hinders things and I just read a very long angry post from bh about how annoying the community has gotten lol.
Its not the OPs responsibility to provide full flash instructions for roms. But if you have CWM already its really easy.
Select zip to install click the modem zip file, clear the cache and wa la.
Now if you don't have CWM just put the modem file in the modem section in ODIN and make sure the bootloaders box is unchecked and you're good.
Flashing a modem is not much different than flashing any Rom (except for the lower chances of things going wrong hehe)
Now what I will say asking this question here instead of just using the search or google only wastes your own time as well as other peoples time
Sent from my SGH-T959V using XDA App

search and google? LOL ..yeah, I've done that, and I get 2 dozen variations on how to flash - in one tutorial they say to use Odin (but they don't tell you how to use it urhr), in another tutorial, there's no mention of Odin what-so-ever - in yet another tutorial, links point to the Froyo only CWM - and in yet another, there's links pointing to the GB CWM.. and in another there's no mention of using any CWM at all so...
not to be cynical, but I've seen a lot of amagad whining about noobs and android beginners.. but if someone would actually put together a point blank step by step tutorial(s) without being so arrogant as to 'keep it in the community' by being ambiguous with their answers and/or excluding certain crucial or needed instructions in their tutorials, there wouldn't be an excess of noobs asking the 'wrong questions'
you'll always get a few knuckleheads, stupidity's inevitable.. but for the most part, dumb questions would be minimal and posted 'thank you's maximized because the available instructions are clear, informative and concise ..so in more ways than one, kats are bringn it on themselves by being vague and/or self-centered enough to completely skip over certain steps because 'myself and everyone here already knows that -or- there's already a tutorial on that little crucial part somewhere else on the web urhr'
I'm not trying to be an assO here.. but damn people, isn't this just common freakn sense? lol
but thanks for the Re Hampster, after 7 hours and cross-referencing 8 different tutorials, I got it flashed and working

Odin Guide:
http://forum.xda-developers.com/showthread.php?t=1001759
Just make sure you skip the parts about flashing a new rom.
Grab the CWM file he posted and put it on your SD card. Remember where you saved it.
I assume you already know how to flash using CWM since you have your phone rooted?
If you don't, go in the market and grab Quick Boot
https://market.android.com/details?id=com.siriusapplications.quickboot
Once you got it installed open it and tap Recovery. Allow with SuperUser.
Once you're in CWM (red lettered text) select Install zip from sd card using the volume keys and confirm using power.
Select choose zip from sd card
Find the zip file for the KI3 modem. Select it and select Yes - Install ki3modem.zip or whatever it's called.
Your screen will flash blue/white text and might go blank for a moment. After this you can reboot. You can verify that you have the KI3 modem by going into Settings > About phone and checking the modem version under Baseband version.

[ROM] [CWM] [EC05] [EI22] Stock Heimdall Packages

Please see this new thread for up to date packages.
http://forum.xda-developers.com/showthread.php?t=1584346
DISCLAIMER:
The whole point of putting out Heimdall packages is to make flashing safer, faster and easier but please use some common sense and read before you wildly click on stuff. No one listed in this OP nor myself, God, Satan or any other being (Supreme deity or not) is responsible for what you do with these files. If you brick something, you did it, so man up and own your mistakes (and hopefully learn from them).
Epic Heimdall Packages:
The title should be self explanatory. Use these with Heimdall to flash your Epic back to stock or to flash CWM recovery. Do NOT re-partition unless you have an absolute good reason to (Like coming back from MTD and you know EXACTLY what you are doing). 99% of the time you will NOT need to re-partition.
Thanks to:
Nubecoder for putting these packages together
Drockstar and Rodderik for putting the purple CWM 3.1.0.1 together
Rodderik for hosting the devphone.org (Primary site and file mirror)
All I did was xfer some files and host the unlimited download server (files.devphone.org).
Heimdall Info and Download:
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-0-and-anti-squish-graphical-update/
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-1-released/
http://www.glassechidna.com.au/products/heimdall/
Primary Links (unlimited monthly xfer):
See New Thread
Mirror Links (limited monthly xfer, please use primary 1st):
See New Thread

Big thanks to insanity213 for hosting the files for me (would cause too much BW on my server).
Now everyone can stop using Odin!!!
NOTE:: The EI22 package does not include the ei22 modem.
Also, there are no bootloaders in these packages, so I do not think you should ever re-partition with these.
=]

nubecoder said:
Now everyone can stop using Odin!!!
Click to expand...
Click to collapse
THIS.
(ODIN sucks)

I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk

stilesja said:
I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I've got a late 2006 24" iMac kickin around the basement. I'll fire it up later on tonight and see if I can get it to roll.

so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?

diptenkrom said:
so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?
Click to expand...
Click to collapse
That is correct.

How come in the EI22 Package the pit file says EC05?

jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
the pit hasn't changed

jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
Rodderik said:
the pit hasn't changed
Click to expand...
Click to collapse
^ this.
Just a name, and FYI the pit was ripped from my phone with Heimdall.
=]

Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?

Shadomastr said:
Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?
Click to expand...
Click to collapse
No root, just stock.
=]

I've not once been able to get Heimdall to work on my windows xp machine, any suggestions?

Is this deodexed I'm looking for a stock rooted deodexed tar
Sent from my SPH-D700 using xda premium

So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!

Digglez said:
Is this deodexed I'm looking for a stock rooted deodexed tar
Click to expand...
Click to collapse
They are not modified, so no, not deodexed.
pjnofrills said:
So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!
Click to expand...
Click to collapse
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]

nubecoder said:
They are not modified, so no, not deodexed.
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]
Click to expand...
Click to collapse
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?

pjnofrills said:
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?
Click to expand...
Click to collapse
Yes it includes the stock recovery.
And yes you would want to keep the EI22 modem (since you already have it).
=]

Thank you for this. I finally got around to un-rooting / returning my wife's phone to stock. Now I can take it into the Sprint store. This should be the default method to return rooted phone to stock in the wiki, as it is quite easy if you follow the Heimdall instructions.

Can this be used to go back to BML from MTD instead of Odin? I'm guessing not since we can't repartition but wanted to make sure.

bootloaders! aka fix the rainbow garbage on awesome rom leaks

ok i see since it has been so long since all the rogers development started people dont really remember about all the rainbow problems and how they were fixed and how the fix needs source code.
we now have bootloaders available in leaks from samsung. they are needed with the stock kernels that come in the leaks to avoid rainbow garbage. i am providing the bootloaders to be flashed in heimdall without having to flash a whole rom.
i would like to make this explicitly clear that if this bricks your phone i am not to blame. there is a significant risk when flashing bootloaders! though the infuse seems to have safety measures i strongly recommend only flashing once. and if your phone becomes a brick you will need to solder things to the phone to fix it via j-tag or adam outlers unbrickable mod. be cautious! dont flash boot.bin without sbl.bin, dont flash sbl.bin without boot.bin, dont mix up the partitions, and if the phone bricks i dont want to know about it unless you want to pay me to fix it!
heimdall package
http://www.multiupload.com/GXUTF4QCJX
odin package (untested)
http://www.multiupload.com.... REMOVED May be failing to flash. very dangerous situation...
bootloaders for heimdall to be added through the "flash" tab (unzip first! ibl/pbl-boot.bin, sbl-sbl.bin)
http://www.multiupload.com/NAIA23JZL1
good luck!

Thanks for posting this. Hopefully it will help out with leak questions that tend to get asked over and over again.
Sent from my SAMSUNG-SGH-I997

Yeah. Thanks for posting, Dani.
do you know if there its any difference in bootloaders amongst different gingerbread leaks?
I have been running the first leaked gingerbread's bootloaders since Prezkit gave them to us and have had zero issues. I think it was kk1? I've been taking an "if it ain't broke" stance. its going good!

MattSoRaven said:
Yeah. Thanks for posting, Dani.
do you know if there its any difference in bootloaders amongst different gingerbread leaks?
I have been running the first leaked gingerbread's bootloaders since Prezkit gave them to us and have had zero issues. I think it was kk1? I've been taking an "if it ain't broke" stance. its going good!
Click to expand...
Click to collapse
there is difs. but I couldn't tell you what. I saw posts by Linux bozo who did binary diferencials but I don't see any difference.
I know the bootloaders have a counter for customer kernels. if you flash the parameters.ifs from the ultimate unbrick it resets it. I also know they changed the galaxy s 2 bootloaders so it was harder to reset the counter so don't expect to be able to reset it when the official update comes along. I also have been using the "if it ain't broke " theory and honestly don't remember which I am using. the packages here are uckk3. if people can test if the counter can still be reset by flashing param.ifs let me know. ill post older bootloaders if it can't otherwise I can't think of any reason to pick one over another.

If i am flashing the bootloaders via odin does the .tar file go in the pda slot. thank you for this.
Sent from my SAMSUNG-SGH-I997 using xda premium

bigbadwolf311 said:
If i am flashing the bootloaders via odin does the .tar file go in the pda slot. thank you for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
yes. that's how I would do it. the PDA slot seems to be automatic as far as partition sorting. the phone slot is for modems but if a modem is included in a package for the PDA slot it flashes just fine. the bootloaders are in the PDA packages normally so that's how I would do it.
please report results because I don't run windows and did not test that package.

I will report back once i get around to flashing the bootloaders. Thanks again for this.
Sent from my SAMSUNG-SGH-I997 using xda premium

Dani897 said:
there is difs. but I couldn't tell you what. I saw posts by Linux bozo who did binary diferencials but I don't see any difference.
I know the bootloaders have a counter for customer kernels. if you flash the parameters.ifs from the ultimate unbrick it resets it. I also know they changed the galaxy s 2 bootloaders so it was harder to reset the counter so don't expect to be able to reset it when the official update comes along. I also have been using the "if it ain't broke " theory and honestly don't remember which I am using. the packages here are uckk3. if people can test if the counter can still be reset by flashing param.ifs let me know. ill post older bootloaders if it can't otherwise I can't think of any reason to pick one over another.
Click to expand...
Click to collapse
I've been using the UCKJ2 bootloaders since they came out with no issues.

Entropy512 said:
I've been using the UCKJ2 bootloaders since they came out with no issues.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I997 using xda premium

bigbadwolf311 said:
I will report back once i get around to flashing the bootloaders. Thanks again for this.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Wonder if u can give me directions for the odin method. Should i put it in download mode like im flashing back to stock? Can i Flash this over a custom rom?

schmidtty661 said:
Wonder if u can give me directions for the odin method. Should i put it in download mode like im flashing back to stock? Can i Flash this over a custom rom?
Click to expand...
Click to collapse
don't select repartition, no need for a pit, the rom shouldn't matter, the file should go in the PDA slot. remember I haven't tested it in Odin. I don't run windows and have little interest in using Odin for anything. phone needs to be in download mode just like flahong a rom. it should only take a second or two to flash. good luck

Cool i should be able to figure this out. Thanks for the quick response.

It didn't work. I had auto restart, f.reset and the PDA slot checked after i opened the file in the PDA slot and after clicking start it just sat at setup for 45 min until i gave up and flashed back to stock. I had to pull the cord while in download mode and the screen turned black with green dots so i had to flash blindly. I tried it twice and the same thing. Has anyone else tried this?

schmidtty661 said:
It didn't work. I had auto restart, f.reset and the PDA slot checked after i opened the file in the PDA slot and after clicking start it just sat at setup for 45 min until i gave up and flashed back to stock. I had to pull the cord while in download mode and the screen turned black with green dots so i had to flash blindly. I tried it twice and the same thing. Has anyone else tried this?
Click to expand...
Click to collapse
I have a bunch of downloads but nobody reported anything at all till now.
ill pull the Odin version for now. try it in heimdall. its not any harder to use.

Can you post an odin package.

I had an Odin package. I got a few downloads, didn't get any people thanking for it, didn't get any positive feedback that it worked and had one user report problems, see the last couple posts. I pulled the file for lack of evidence that it worked. I don't run windows and prefer heimdall so I haven't tested it in Odin. sorry but I suggest you either flash an entire rom leak then flash a non secure kernel through Odin ( any custom kernel should do also flashing back to stock should also do just fine) and then flash a rom or learn heimdall which works on windows as well as Mac and Linux. I would have done a oneclick package but it still requires the installation of the heimdall back end and I figured it was really no harder to just use the heimdall package system.

any chance of relink thats not at multiupload?
edit: disregard, found a workaround. might be useful in future tho.