hey, i've installed the miui 1.11.4 on my g2x.... everything is perfect but the usb conection... windows 7 does not recognize, and the phone turns off and block... any idea what's going on??
thanks!
Which MIUI are you using? By whom? Use the whitehawkx one, it works fine with USB, the other one posted in the development forum has some USB mounting issues.
Yea I found this to be true also. Its something to do with the rom. If you try to connect on a FRESH reboot, it works fine. But something happens after a while which will lock your phone up when trying to access the memory card via PC through USB.
If you reboot into recovery, you can mount the SD card as a test to make sure something else isn't astray.
But as an alternative solution which I am addicted to, its called WiFi File Explorer. Just enable WiFi and launch the app. It'll grab an IP that you can access from any other device on the same network through a Web Interface. You can upload, download, rename, move, etc, and even remotely install apps.
It's pretty neat and great for those with Tablets also. I can load it up on my phone with WiFi with my tablet connected via WiFi Tether. It doesn't require an Internet Connection and the transfers are directly sent to each other, so it is really fast... probably faster then SD read/write. WiFi is at least 11mbps so you can write to internal storage as fast as it can handle.
He keeps it updated pretty often. I'm always getting updates (which mainly updates the Web Interface with additional features). Great for traveling too when you don't have a sync cable. Anything with a browser can access it. It has passwords and stuff too if you want, but I don't use passwords as the connection is only on as long as the WiFi File Explorer app is open which is typically only as long as the transfer.
No and no.
this is a problem, and it happens sometimes only with MIUI. Sometimes it may also completely freeze.
The best workaround it to install Multi Mount SD-Card, and use it's widget - it solves the problem (you have to click on it to mount/unmount)
MIUI is the only one I've had problems like this. Something with the USB mount locks up the phone.
If a Widget is a good work-a-round then so be it.
G2x - 2.3.7 CM7
Transformer - 3.2 Revolver OC/UV
ok, i see but i have this problems... the phone crash on uwb connection, and sometimes the signal go off...kind of airplane mode... and i can't turn it off... and whatsapp app doesn't seem to work properly... the usb problem seems to go away if a enable debuggin stuff.. but not always!
avio07 said:
Which MIUI are you using? By whom? Use the whitehawkx one, it works fine with USB, the other one posted in the development forum has some USB mounting issues.
Click to expand...
Click to collapse
im using this one
http://forum.xda-developers.com/showthread.php?t=1322438
player911 said:
Yea I found this to be true also. Its something to do with the rom. If you try to connect on a FRESH reboot, it works fine. But something happens after a while which will lock your phone up when trying to access the memory card via PC through USB.
If you reboot into recovery, you can mount the SD card as a test to make sure something else isn't astray.
But as an alternative solution which I am addicted to, its called WiFi File Explorer. Just enable WiFi and launch the app. It'll grab an IP that you can access from any other device on the same network through a Web Interface. You can upload, download, rename, move, etc, and even remotely install apps.
It's pretty neat and great for those with Tablets also. I can load it up on my phone with WiFi with my tablet connected via WiFi Tether. It doesn't require an Internet Connection and the transfers are directly sent to each other, so it is really fast... probably faster then SD read/write. WiFi is at least 11mbps so you can write to internal storage as fast as it can handle.
He keeps it updated pretty often. I'm always getting updates (which mainly updates the Web Interface with additional features). Great for traveling too when you don't have a sync cable. Anything with a browser can access it. It has passwords and stuff too if you want, but I don't use passwords as the connection is only on as long as the WiFi File Explorer app is open which is typically only as long as the transfer.
Click to expand...
Click to collapse
A big thanks to you. That app is awesome.
Sent from my HTC Desire using XDA App
you try uploading the drivers?
player911 said:
MIUI is the only one I've had problems like this. Something with the USB mount locks up the phone.
If a Widget is a good work-a-round then so be it.
G2x - 2.3.7 CM7
Transformer - 3.2 Revolver OC/UV
Click to expand...
Click to collapse
Hey wifi explorer is great, too, used it many times. You know, some people like red heads, some blondes...
OP, did you try SD Multi mount widget? You tap on the widget, and it should say connect usb 5... 4... 3... 2... 1... and it mounts.
player911 said:
But as an alternative solution which I am addicted to, its called WiFi File Explorer. Just enable WiFi and launch the app. It'll grab an IP that you can access from any other device on the same network through a Web Interface. You can upload, download, rename, move, etc, and even remotely install apps.
Click to expand...
Click to collapse
Thanks for the tip on this app. Best 59 pence I ever spent.
Related
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
elguapo76 said:
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
Click to expand...
Click to collapse
Having same issue as you. My dell mini 10v connects, takes a bit longer then usual to acquire network address, and when it does the internet still doesnt work.
I'm sure its just a matter of the program being updated to work on the CDMA hero
Ditto
I'm having the same problem as well. Connects after a very long time and receives IP information, but nothing after that. Has anybody reported to the wifi-tether developer yet?
As soon as it works on the Hero, I'm ready to donate, as I gladly paid money for WmWifiRouter on my previous phones.
Same problem with me. Is anyone else getting the "AC disabled" message in the notification window once the PC is "supposedly" tethered? I noticed my phone getting really hot.
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
teli said:
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
Click to expand...
Click to collapse
Not sure but what I did notice is that when I ran it for the first time on Mocado's ROM I got a prompt asking me to "Allow" the app certain rights. Now when I installed the app before I flashed his ROM but right after rooting my phone I did not get this prompt. Maybe the way it's installed on his ROM has something extra that has it correctly and fully installed on the ROM to allow it to work properly.
the permissions screen is just adding the program to the super user whitelist kinda like a list of programs permitted to run as su maybe downloading super user white list off the market I remember getting it from there with my G1 if not just pull the apk from the modaco Ron but you should try the modaco rom you don't even have to wipe all your settings and everything will stay the same.
I know it isn't ideal, but you can share the internet connection ICS style if you do the following:
adb shell
Code:
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
At which point you will get disconnected from your adb shell and the internet Windows will recognize the Hero as an NDIS adapter. To turn it off I just go into Settings -> Wireless -> Mobile network sharing and toggle it on then off again.
There might be a way to get netsharing to also flip the usb function, using net_and_usb but it doesn't seem to work and my ARM disassembly skills aren't good enough to tell why.
Hey guys,
My wifi tether did not work, even with root, until I installed MoDoCo's ROM. After I did, it was gravy from there. 2.4 down .60 up.
mine works
mine works too, i just use it as a wireless router...
Mine works flawlessly on MoDaCo's Rom. Im guessing it has something to do with a string of code that the custom rom has that the stock one doesnt.
I finally took the plunge into the MoDaCo rom. Easy as pie and tethering works with no prob. Just Do it.
Yeah. I see no reason why not to go with the MoDaCo's. This was my first time flashing a rom on anything and it got it easily the first try.
Can all of ya'll confirm that the encryption or device access list does NOT work on wifi tethering app?
Device access list seems to work fine for me, but the encryption does not.
Anyone know if there's a workaround for USB tether yet, that allows native mobile network sharing? (not that crazy switch off/switch on quickly workaround that doesn't always work)
I don't really like the wifi tether because it drains my battery, even if my phone is plugged in to my laptop via USB.
Also, I haven't been able to get above 1.2 mbps down speeds with the wifi tether, and I was hoping that native mobile network sharing might help this. Anyone else having slow connection issues with this?
Wifi tether does not work on the stock Sprint ROM. It does (for some reason) work on Modaco's.
Check this link for the developers thread on whats happening - http://code.google.com/p/android-wifi-tether/issues/detail?id=188
He doesnt have a Sprint Hero to test with so he needs our help.
fixed!
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
auto_exec said:
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
Click to expand...
Click to collapse
I just tried this app on my computer, and I can confirm that the pre release works on the HTC Hero stock rom with no problems. I did this test on Windows 7 x64
Hey guys, I have not seen a post about this yet so I figured I'd ask. I just rooted and was able to remove ATT bloatware using titanium backup. I would also like to add a wireless tethering app so that I can use my phone as a wireless modem. I have this app installed on my sprint htc hero (also rooted). I searched the market (where I found it on my hero) but I assume ATT blocks this somehow. Has anyone tried to wirelessly tether yet? If so, were you successful?
I was just browsing over on the vibrant forums and they have no luck yet. They were able to get the apps to install fine, but the ssid would not broadcast. They are still seeking a solution... Hopefully us ATT users want this as bad as I do
want more like need.
the whole reason I got this phone was because of the community that seems to be making things happen faster than any of the iphone 4 development! I'm excited to see what they can do with the wireless tethering.
It seems to be somthing AT&T is doing. Wireless Tether will not work on the Aria right now either.
Hmmm interesting. I hope there are more developers for the captivate vs the aria.
Sent from my SAMSUNG-SGH-I897 using XDA App
Im sure we'll see some of the AT&T Nexus one Devs migrate on over. I mean who doesn't want a 4inch super AMOLED and Hummingbird CPU to play with. Not to mention the GPU performance pretty much double's any other Android on the market as of now.
I put my unlimited data iPad sim in my Nexus One to tether with so I'll be ok for now anyway.
I just sideloaded android wifi tether on my Captivate, and it does not work. It appears to work, but my Mac doesn't see to network. I tried the 2.0.5 beta as well as 2.0.2. Hope someone finds a fix soon, or I might have to go back to my iPhone 4 and add to supported tethering. Ouch!
O
I'm pretty sure it's something in the kernel...a custom rom might help...maybe if it uses a kernel from another S device that has the same hardware.
Its not wifi tethering but I've got pdanet working over the usb cord and bluetooth. Not quite as good but if you need something to use while you wait for someone to figure the wifi out it should do the trick.
Doesn't the Captivate have built in tethering though? And couldn't you just use that?...
USB Tethering working on Mac via PdaNet.
I have installed PdaNet on my Captivate to use to tether my Mac (10.6.4). I had to ADB the PdaNet.apk, because it wouldn't install being a non market app. I installed the server application on the Mac. Works like a charm. Latency is kinda high though ~500ms.
Used command "install" instead of "push" to make it install, as it failed when using "push".
"$ /Volumes/HDD/Users/YOURUSERNAME/Downloads/android-sdk-mac_86/tools/adb install /Volumes/HDD/Users/YOURUSERNAME/Downloads/android-sdk-mac_86/tools/PdaNet.apk" HIT ENTER
Of course my SDK is located in my Downloads folder, so all i did was Drag, and Drop the folders into Terminal. I put the .apk into the same folder before I used the "install" command.
I hope this helps someone.
Try this link
http://code.google.com/p/android-wifi-tether/
jetski said:
Try this link
http://code.google.com/p/android-wifi-tether/
Click to expand...
Click to collapse
Not working on my Captivate. Must need a custom Kernel or something. I even tried the 2.0.5 pre5.
Apparently at&t forgot to block the built in USB tethering option of the phone.
If you have all the drivers installed from here you can tether via USB.
1) go to settings >applications > development > make sure nothing is selected there.
2) go to settings > applications > USB Settings > select PC internet.
Connect the phone.
You might need to go into your device manager on the laptop to make sure you are not required to install additional drivers.
If you do > install the missing drivers and you are online.
If you dont > you should be online
Typing this from my USB tethered laptop now.
Also i noticed that Barnacle Wifi Tether is working but is not stable.
It will create a connection for a short time and then crash.
wpb2 said:
Not working on my Captivate. Must need a custom Kernel or something. I even tried the 2.0.5 pre5.
Click to expand...
Click to collapse
Not working here either.
We need kernel sourcess to enable NEtFilter on the kernel, by enabling this module, wifi thethering should work.
Yes you need custom kernel, which has been standard on most if not all custom roms for awhile now.
-------------------------------------
sent via 4000 node beowulf cluster
Lol, damn edge
-------------------------------------
sent via 4000 node beowulf cluster
Barnacle worked for me for awhile and it crashed
Sent from my SAMSUNG-SGH-I897 using XDA App
clubtech said:
Apparently at&t forgot to block the built in USB tethering option of the phone.
1) go to settings >applications > development > make sure nothing is selected there.
2) go to settings > applications > USB Settings > select PC internet.
Connect the phone.
You might need to go into your device manager on the laptop to make sure you are not required to install additional drivers.
If you do > install the missing drivers and you are online.
If you dont > you should be online
Typing this from my USB tethered laptop now.
It will create a connection for a short time and then crash.
Click to expand...
Click to collapse
Which windows are you using? I tried this on 7 and would not work. Seems drivers only support xp and vista....
Best tethering option for a rooted samsumg captivate?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Download non-US version of Samsung driver and then connect your phone via USB to PC. Select PC Internet for the USB setting on your phone and you're tethered. US verison of Samsung driver does not work.
android Wi-fi Tether is what I use.
http://code.google.com/p/android-wifi-tether/
The US captivate version does not have a wired tehering capability. (no modem). I use wireless-tethering available off of a google code project... The latest expirimental works great for me! Pm me and I will send links and post here when I am home.
Sent from -- ATT Captivate (Samsung Galaxy S) -- XDA app
Wrong. See my post above. It is just a driver trick.
Sent from my SAMSUNG-SGH-I897 using XDA App
i was using PDAnet and recent (finally) installed Samsung's Kies on my laptop so i could check for firmware updates,
Kies has tethering as an option, and oddly, my laptop seems to browse at faster speeds than with PDAnet
fwiw
nbs11 said:
android Wi-fi Tether is what I use.
http://code.google.com/p/android-wifi-tether/
Click to expand...
Click to collapse
Wi-fi is easiest option, otherwise you can download for 32bit this driver for USB tether: http://drivers.softpedia.com/progDo...SB-Driver-for-Windows-x86-Download-96692.html
64 bit driver also found on softpedia.
nbs11 said:
android Wi-fi Tether is what I use.
http://code.google.com/p/android-wifi-tether/
Click to expand...
Click to collapse
Which one did you download and install? I don't see an option for galaxy s
Sent from my SAMSUNG-SGH-I897 using XDA App
update: downloaded nexus one version...working fine, posting this from a wifi tethered netbook! SWEET SAUCE
Linux user confused.
I run linux on my laptops, HP i7 and Acer Ferrari. Had plugged in Samsung Captivate via USB for file transfer, networking detected phone and connected (first time I wasn't aware networking had used usb0 (phone) instead of my WiFi connection; eating up my 3G data). Tried later on my Acer Ferrari at work; connects within a few seconds of being plugged in. I don't have PDAnet or any other special USB program installed.
warri said:
Which one did you download and install? I don't see an option for galaxy s
Sent from my SAMSUNG-SGH-I897 using XDA App
update: downloaded nexus one version...working fine, posting this from a wifi tethered netbook! SWEET SAUCE
Click to expand...
Click to collapse
Install blocked?
I am rooted, but what else will I need please?
zeddock
zeddock said:
Install blocked?
I am rooted, but what else will I need please?
zeddock
Click to expand...
Click to collapse
Use android central sideoading wonder machine or enable your phone to sideload
jhnstn00 said:
Use android central sideoading wonder machine or enable your phone to sideload
Click to expand...
Click to collapse
I used the wonder and did eventually get to working tether but it doesn't give me option to install nonmarket apps directly from the phone; I have to dl them to the PC and install.
I tried to set it up with several different ways but no others seemed to work.
What suggestions do u have for most simple unblocking so installs can happen right at phone?
Thanx for the help! It was fun to get this far!
Zeddock.
zeddock said:
What suggestions do u have for most simple unblocking so installs can happen right at phone?
Click to expand...
Click to collapse
I used this: http://androidforums.com/samsung-captivate/124738-how-enable-sideloading-apps-captivate.html
XDA has this: http://forum.xda-developers.com/showthread.php?t=738376
Grrr. Android Tether worked fine for me at one time, now everytime I load it, and enable it, it locks my phone up so bad I have to unplug the battery....
Anyone else have this problem and know how to fix it?
smeltn said:
Grrr. Android Tether worked fine for me at one time, now everytime I load it, and enable it, it locks my phone up so bad I have to unplug the battery....
Anyone else have this problem and know how to fix it?
Click to expand...
Click to collapse
It's a known issue. Most ppl experience of battery pulling.
Besides the fact that it is very difficult to setup security (WEP???) and effectively block others, mostly brain dead iphones, to automatically connect to your phone, it is not really not worth the trouble. I fired up this Android Tethering on a busy Airport and immediately got more than dozen iPhone connected to it. The build-in access control can control who has the access to the internet but incapable of kick the ofenders off your phone. Battery was dead in less than 30 minutes.
There is now a new solution that enables native wireless AP (WPA2 capable) in addition to the USB tethering (still my favorite) in Captivate Android Development forum. Unfortunately you have to flash to a custom kernel in order to restore the wireless AP capability that was stripped off by request of AT&T.
so no other option for wifi tethering besides the custom kernel huh?
I really want to tether my iPad to it to show off to my friends at work
foxbat121 said:
It's a known issue. Most ppl experience of battery pulling.
Besides the fact that it is very difficult to setup security (WEP???) and effectively block others, mostly brain dead iphones, to automatically connect to your phone, it is not really not worth the trouble. I fired up this Android Tethering on a busy Airport and immediately got more than dozen iPhone connected to it. The build-in access control can control who has the access to the internet but incapable of kick the ofenders off your phone. Battery was dead in less than 30 minutes.
Click to expand...
Click to collapse
I'm using wireless_tether_2_0_5-pre7.apk and have NEVER had an issue with my phone locking up. I wonder if people are forgetting to turn off WiFi and bluetooth on their phones, which may interfere with the tethering process.
As to encryption, setting it up was very simple and I've never had anyone else leeching off of my wireless.
so I uninstalled my version, which I tried pre5, and pre8, none worked. Uninstalled, rebooted phone, installed pre7, didn't work, uninstalled ATM rebooted phone, then turned it back on and it works.. Weird...
smeltn said:
so no other option for wifi tethering besides the custom kernel huh?
I really want to tether my iPad to it to show off to my friends at work
Click to expand...
Click to collapse
the custom kernel isn't as bad as it sounds (all it does is to uncommented a few lines in the init.rc). But it does require Odin to flash it which is a hassle or error prone.
WhoTHCares said:
I'm using wireless_tether_2_0_5-pre7.apk and have NEVER had an issue with my phone locking up. I wonder if people are forgetting to turn off WiFi and bluetooth on their phones, which may interfere with the tethering process.
Click to expand...
Click to collapse
Nope. I used pre8 and don't have wifi or BT on. It crashed once. And refuse to work many times. And I have reboot the phone inorder to completely shut off the tethering (the adhoc network is still visible even if you turn off the tethering).
OK so I have had my Transformer for 2 days now and so far it has been little more than a paper weight. I have not been able to download a single app from the market. I've tried everything suggested here (cancel/restart, reboot, etc) with no luck. I have not been able to even update Google Maps or install Flash Player, literally I have not been able to install anything. I've tried stock and rooted plus I cannot get any version of Prime to install (finally got the root and CWM installed). Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device. Only 2 days of ownership and I am completely frustrated with this thing. I really like and want the micro SD capabilities but if I can't resolve this ASAP it will need to go back to the store.
Anyone have any suggestions on what all I can try? Please help!
Sorry, I'm a little busy to look for the direct links.
Just look-for the vanilla NVFlash then add the Prime 1.5 (nvflash version). Dump them together into a folder then run the batch file. Simple !
I just helped two co-workers with their brand-new TFs getting rooted this way.
Maybe 5-10 minutes top.
Make sure you unzip the downloaded Prime file (it becomes 4 files). Read the NVFLASH post and have the USB driver ready.
Thanks man I'll give it a shot here shortly
Good luck.
And if you ever have a need to get back to stock (refund maybe ?), there is a stock-ROM (nvflash version), just as easy to get back.
hyperxguy said:
Good luck.
And if you ever have a need to get back to stock (refund maybe ?), there is a stock-ROM (nvflash version), just as easy to get back.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1093403
You don’t have to root or flash with a custom rom to get the basic stuff like Wi-Fi. Everything works out of the box as advertised. If something doesn't then either you are doing something wrong or there is a fault with your device. Did you try connecting to a normal Wireless Router? Honeycomb can not see some types of adhoc networks without installing a patch (i.e created by Windows, this may be applicable to some phones too, however it worked fine with My Galaxy S).
Digiguest said:
http://forum.xda-developers.com/showthread.php?t=1093403
Click to expand...
Click to collapse
I guess you enjoy using command lines to unroot ?!
There is a nvflash package w/stock-rom available. Just double-click download.bat then wait a few minutes.
The Link is here:
http://tabletroms.com/forums/showthread.php?1071-Asus-Transformer-NVFlash-Stock-3.1-Recovery-Roms&
Volleyholic said:
OK so I have had my Transformer for 2 days now and so far it has been little more than a paper weight. I have not been able to download a single app from the market. I've tried everything suggested here (cancel/restart, reboot, etc) with no luck. I have not been able to even update Google Maps or install Flash Player, literally I have not been able to install anything. I've tried stock and rooted plus I cannot get any version of Prime to install (finally got the root and CWM installed). Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device. Only 2 days of ownership and I am completely frustrated with this thing. I really like and want the micro SD capabilities but if I can't resolve this ASAP it will need to go back to the store.
Anyone have any suggestions on what all I can try? Please help!
Click to expand...
Click to collapse
Hi, sometime the problem is in the market. not the device itself. I got similar experience with my HTC device. I've installed many ROMs but the market always screwed. So what I did was, just reset your device, when it asks the Google account, type in your email like this: [email protected] instead of just blablabla or [email protected]
Volleyholic said:
Lastly, since this is a Wifi only device it is important to wireless tether with my cellphone. Two days and I still cannot get it to work, will not even find the device.
Click to expand...
Click to collapse
I guess your phone is offering up an adhoc connection, which Android doesn't support out of the box. It should work fine with phones that offer up a true infrastructure hotspot. Personally, I think adhoc networks should die a horrible death, but I appreciate their necessity if that's all your phone can do.
Search for adhoc and you should find a solution to this issue. You can also try PDAnet (tablet) too.
Regards,
Dave
Maybe bad flash? try re-flash ROM again.
makec3rt said:
Maybe bad flash? try re-flash ROM again.
Click to expand...
Click to collapse
Ad hoc issue appears to be most relevant.
Market download issues =software issues not hardware. If you do not have any other wifi option then go to McDonald's or Starbucks and try it on their wifi.
Sent from my ADR6400L using XDA Premium App
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Thanks for the advice all. I don't have a custom ROM on it yet, just rooted. I can't get the zips to work. Says cannot open (bad). Will try re-downloading for a 5th time and see how goes it. I did figure out the wifi issue on my phone - it was ad hoc as stated and it recognizes my phone now but still won't download apps (says it's downloading but never does). Tried cancelling and restarting several times as well as factory resetting the device. Does the same thing when I connect to my home network as well.
Darrell1965 said:
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Click to expand...
Click to collapse
My Wifi network is hidden and I had no issue connecting my TF.
What type of router and what settings does it have?
I am using a NetGear WNDR3700 (802.11-g,n). The TF connects to the 2.4 GHz section over 802.11n.
Is it wise to be playing with recovery images and custom ROMS, if you can't get basic market functionality working?
Clearly before changing your TF from stock, get the market working, this is almost certainly a probem with your Wifi router...
The only problem I am aware of with the Transformers Wifi, is sometimes it does not getting a DHCP address when coming back from sleep (use Static IP), the TW release has this fixed, but the WW does not for some reason, i'm guessing they know 3.2 is incoming soon.
Follow these steps to get the market working:
I don't exactly know what the problem is, but I've had it on a couple of phones before. I do NOT have a googlemail account, so that wasn't the problem.
I deleted all cache/data from the following programs: Market, MarketUpdater, Downloads, Download manager, googleapps (anything that seems relevant)
now first go on a computer, open your gmail via gmail.com, send a mail, edit some contacts, just make sure you do something! Now reboot your eee pad, accept the market policies and see if it works....
If this doesn't fix it, then I have no options left
Update: I ultimately returned my TF (I had already suspected that I didn't receive a new device due to other issues and packaging). I received the new TF yesterday (A+ to Amazon.com). The new TF was 1000x better. Loaded right up, connected, market apps loaded easily, quickly and on the first try. All in all I am pleased. And the root and ROM installs worked flawlessly. Actually enjoying my TF now. Thanks all for the advice and help!
Darrell1965 said:
Don't know if this helps, But I just discovered that the Transformer doesn't seem to like hidden SSID.
Mine connects fine if the SSID is shown, but once I hide the SSID it said out of range.
My EVO 3D, iPod, TV all work with it hidden.
Does someone know if you can setup the TF to connect with hidden SSID?
Thanks
Click to expand...
Click to collapse
All the WiFi at my work are hidden and there at least 8 people with TFs here. Mostly Prime but some stock. None of us EVER had problem with hidden SSID.
At home my two WiFi are hidden. No problem.
jerrykur said:
My Wifi network is hidden and I had no issue connecting my TF.
What type of router and what settings does it have?
I am using a NetGear WNDR3700 (802.11-g,n). The TF connects to the 2.4 GHz section over 802.11n.
Click to expand...
Click to collapse
I am running a Belkin N750DB, (WPA2 encryption)
Every other thing in my house works fine, hidden. I changed from a ASUS 300N router that was running same encryption WPA2 with no problem on the TF. I have check and doubled checked settings.
Stumped
Also have it set on 2.4 GHz over 802.11n
I also had a issue with the wifi connection on my first unit. Its would pause/stall all the time in the interent browser and market would give me connection error messages. Now Im on my third one and it has a bright stop on the screen but the internet works great.
Hey guys If I am in the wrong place, please let me know. I got my TF300T just a little while ago and am now trying to use it as a my main computer. That requires me to able to connect to the net on it. It works just fine when I am connected to a regular WiFi network. However, I have no Internet connection at home except for my Sprint Motorola Photon Q, which I had been using tethered over USB to my PC to get the PC online. That worked fine. But this past month, I lost my job and needed to sell the PC, so all I have left is the TF300T. I was sure it'd work fine since I got BT tethering to work fine in the past with that phone. However, I was just experimenting at that point. Now, I see it's a little more ... complicated:
I set my Photon Q to act as a WiFi hotspot using PDANet+ a.k.a. FoxFi. Creating a WiFi hotspot, I can see it on the TF300T. Whether I enter the right PSK2 key or don't use encryption at all, connecting is impossible. It will "Authenticate...." after a minute or so and then try to get an IP via DHCP. Then it will "work" a long time and then drop the connection and try again. This is with the phone an inch away. I found it had a lot of trouble just getting an IP, so I tried setting it up with a static IP. I found out that PDAnet+ seems to default to 192.168.43.111 and the gateway is presumably 192.168.43.1. I tried some other things like .100 without luck. It WILL connect but the WiFi strength indicator in the bar stays gray. It shows up and down arrows as though there's activity, and Excellent strength, but won't actually work in any apps, incl. the default Android browser. Also tried pinging the host phone using the terminal only to get Destination Host Unreachable errors.
I then tried Bluetooth tethering. It will connect and works at a decent rate. But, the only programs that work are web browsers! IM clients, Skype, Google Play, Maps, Gmail, nothing else can connect. Android is convinced I am not online at all, yet I can browse web pages at full speed, which I am doing right now. IIRC PdaNet uses some bizarro proxy setup but they tell you on their site to "configure the proxy settings" and give you none of the details like IP or port! How useful. So, this does me little good. It's horribly crippled.
I tried numerous other WiFi tether apps, most of which hard crash the Photon Q so it reboots entirely the moment it turns on the hotspot. Barnacle and one of the WiFi tether apps (1-click? I've tried so many I can barely remember...) will launch, I can see it on the TF300T, but when I try to connect it says "ANDROIDTETHER or whatever the SSID is, Saved". No matter how many times you choose Connect or Forget, then Connect again, nothing. Gets stuck at "Saved."
I'd try connecting the phone via USB via the TF300T dock but I have searched heavily and cannot find any way to do it. Do I have any options at all?
Thank you for any info.
Hi
I'm tethering Internet from my SGS 1 with 4.2.2 rom with no problem at all. I think you have problem with wifi settings.
Try to set both phone and tab wifi to correct region. If you have phone set to USA and tab to Europe it won't work. You'll find it under Wireless-advanced if you have customised roms, for stock I don't know how to set it. Haven't have stock roms for ages.
About proxy, basic proxy settings in Android works only for browser, so you will need something like proxydroid on your client. I'm using it and for me it is working. For settings, check your phone settings-mobile networks-access points and copy them from there, or call your ISP and ask them for settings.
Hope this helps.
WiFi tether for root users. Is the best thing ever. If you aren't rooted. Root your phone. Also, is there a cm ROM available for your phone? If so, switch. Then use it's default tethering. Your phone is definitely the culprit here.
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Epicenter714 said:
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Click to expand...
Click to collapse
Try different profiles. I tried my EVO LTE last night for 2 hrs. Tried all generic settings. I ended up switching it to sg3 profile same chipset as mine. Worked fine after that.
Sent from magical jelly bean.
Epicenter714 said:
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Click to expand...
Click to collapse
kaos420 said:
Try different profiles. I tried my EVO LTE last night for 2 hrs. Tried all generic settings. I ended up switching it to sg3 profile same chipset as mine. Worked fine after that.
Sent from magical jelly bean.
Click to expand...
Click to collapse
Yep exactly what kaos said. I had that issue with my HD2 doing exactly what you said. Would "save" but never connect. I ended up using something like the nexus profile or something.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
Yep exactly what kaos said. I had that issue with my HD2 doing exactly what you said. Would "save" but never connect. I ended up using something like the nexus profile or something.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Great suggestions guys! I seem to be making some progress. I can now "connect" and get an IP, but the "wifi signal" bar thingy in the lower-right stays gray, not blue like it usually is when on working WiFi, and apps still cannot get to the net, which I assume is what the gray means (network connection but no internet connection). I will have to go down the list and try every possible configuation, I suppose. Yikes! I'll keep at it...
Thank you!
Epicenter714 said:
Great suggestions guys! I seem to be making some progress. I can now "connect" and get an IP, but the "wifi signal" bar thingy in the lower-right stays gray, not blue like it usually is when on working WiFi, and apps still cannot get to the net, which I assume is what the gray means (network connection but no internet connection). I will have to go down the list and try every possible configuation, I suppose. Yikes! I'll keep at it...
Thank you!
Click to expand...
Click to collapse
Nice. Now you need to connect to proxy.
stenc55 said:
Nice. Now you need to connect to proxy.
Click to expand...
Click to collapse
This may sound dumb, but how do I do that? I guess I need to set it globally in Android and not per-app because most apps don't let you set one. Thanks!
Epicenter714 said:
This may sound dumb, but how do I do that? I guess I need to set it globally in Android and not per-app because most apps don't let you set one. Thanks!
Click to expand...
Click to collapse
Im using ProxyDroid. But you need to have rom with root and iptables enabled. Official CM10.1 doesn't have it, unofficial from Surdu_petru does.