Today my kids cracked my screen on my transformer.
I looked around the forums to see if there was a answer but there wasnt.
Where can we get a new digitizer? from ebay? or can asus rma fix this?
Replacing the screen is a very complicated process. I highly recommend you RMA it. Have them estimate it for you.
Related
i dropped my Fuze today and i cracked the screen. I'm trying to figure out if its the digitizer that cracked or the LCD can anyone tell me how to check. The screen looks fine when i have it on the black background its hardly noticeable, but when I text you can tell its cracked pretty nicely. I can still use it and see everything just that it annoying and want to get it fixed. They sell them on Ebay for pretty cheap (digitizer that is). i also was wondering if anyone knew where to find instructions on replacing the digitizer I can't seem to find anything.
Any help would be greatly appreciated...
Thanks
Post some pictures up. Maybe someone can help by looking at it.
regardless if its just the digitizer or the screen, from what I've read, its easier to probably change them both. You're looking at a cost of no more then $100. That's a little bit over what you can find them for on the bay. i dont think the digitizer was actually meant to be easily disassembled at our level. If you need help disassembling your TP otherwise though, try mikechannon.net
I'll have pictures up tonight....
I just figured it out that its the touchscreen itself... The LCD is intact because there is not bleeding of any sort..... Does anyone know of a place that repairs this sort of thing?
Not recommended to separate digitizer with the lcd. It has a special glue (more like clear double tape) to attach them together that really really sticks. I tried to separate them with cutter blade and crack the lcd. There was an advise I read on the internet somewhere to use dental floss. Try google it.
And be careful of choosing the replacement, you could end up with this problem. Well ... I did....
I just got my digitizer in the mail and contemplating doing the repair myself.... has anyone done it or can point me to the right direction to just replace the digitizer?
Good Luck .....
Below are pictures of the result. I don't know the correct procedures of separating those two.
Just .... don't do my mistakes.
Good Luck.
I was wondering what the cheapest way to get a new screen put in my skyrocket. I only had it a week and I dropped it and shattered the screen. Where could I buy the screen and digitizer to fix it myself? Is there a place that anyone recommends fixing it for me? Will samsung repair it for me and if so how much am I looking at?
I recently dropped my TF300 (in the process of jerry-rigging a carrying case for it, might I add) and it happened to shatter the glass and tear some of the ribbon for the digitizer, rendering it completely useless. The LCD beneath is fine, in fact I have already separated the LCD from the digitizer itself.
My question is:
Can I buy a replacement digitizer for the TF200 and install it to my TF300?
They seem to be the same ribbons and i'm sure the dimensions are the same.
The problem is the digitizer for the TF300 is around $150 and just $50 for the TF200.
Dude word of advice only buy the tf300 glass. But replacing it will be a pain but good luck to you
Sent from my HTC Ruby using xda app-developers app
Almost sure,,
Hello hello,
i recently smashed up the same digitizer of my tf300t. There are no videos about opening the thing, so i proceeded and could unplugged the digitizer without any complication. So, after long searching i found ur question and realize that the connector is just the same. I'm almost sure that tf200 should work properly with tf300.
best regards,
Abrhm
Not the same
I'm sure you have probably figured this out by now, since it's been months, but the TF200 and the TF300 digitizers are indeed DIFFERENT.. And the TF300 can be procured pretty easily these days for about $70.00..
So, this is for the benefit of anyone else who happens to stumble across this post.
Also, heed, there has been a significantly high rate of folks, myself included, who have changed the digitizer out only to find that the touch-screen still doesn't work due to some other issue..
So, last night, sitting on my concrete balcony I fumbled and knock my N8013 off the table. smacked the concrete and cracked the digitizer screen right down the middle, scuffing up the frame a good deal.
Already disassembled and have found the digitizer screens ($25 from Hong Kong, $30 in USA), so no problem there. But, I want to replace the scuffed up frame too, as that will drive me crazy, not to mention lower the resale value later on.
Can't find them. Anyone have any sources for these parts? ETrade is no go. Not finding anything on ebay either.
Help!
Barsky said:
So, last night, sitting on my concrete balcony I fumbled and knock my N8013 off the table. smacked the concrete and cracked the digitizer screen right down the middle, scuffing up the frame a good deal.
Already disassembled and have found the digitizer screens ($25 from Hong Kong, $30 in USA), so no problem there. But, I want to replace the scuffed up frame too, as that will drive me crazy, not to mention lower the resale value later on.
Can't find them. Anyone have any sources for these parts? ETrade is no go. Not finding anything on ebay either.
Help!
Click to expand...
Click to collapse
Oddly, I was looking up this exact thing earlier today and found this: http://www.globaldirectparts.com/OE...1-N8013-Housing-Frame-p/smn8013hsg3blu-qs.htm
Mine's just cracked, so don't know if I'll go through the trouble of replacing it. But hope this is what you were looking for.
EDIT: Oh, sorry, just noticed it's out of stock. I'll keep looking around, though, and let you know if I find anything.
So, there's this link, too. It says it's for a white one, but given it's just the frame, I don't know what that could be referring to. This doesn't say it's out of stock. Looks like the same part as the other link. http://www.globaldirectparts.com/OE...1-N8013-Housing-Frame-p/smn8013hsg3wht-qs.htm
loribuono said:
Oddly, I was looking up this exact thing earlier today and found this: http://www.globaldirectparts.com/OE...1-N8013-Housing-Frame-p/smn8013hsg3blu-qs.htm
Mine's just cracked, so don't know if I'll go through the trouble of replacing it. But hope this is what you were looking for.
EDIT: Oh, sorry, just noticed it's out of stock. I'll keep looking around, though, and let you know if I find anything.
So, there's this link, too. It says it's for a white one, but given it's just the frame, I don't know what that could be referring to. This doesn't say it's out of stock. Looks like the same part as the other link. http://www.globaldirectparts.com/OE...1-N8013-Housing-Frame-p/smn8013hsg3wht-qs.htm
Click to expand...
Click to collapse
You are my hero. As to the White that looks "blue", I bet it is white and just the picture. but this provides me hope. I may order and wait the 29 days. If I find something I will post. Please do the same. Am going to order the digitizer in the meantime.
Thank you So Much.
What I did in the meantime thinking I had to keep it was sand all the silver (Blue?) off it, figuring it looked better than with the scuff and nicks. don't want to use it though.
As expected, they do not have the frames. I just ordered it from Global Direct Parts and a roll of double-sided tape that I hope will replace the tape that holds the digitizer to the frame.
Thanks again for the lead and good luck with your repairs.
Well, ordered the digitizer screen from All4Cellular. Emailed them asking about the Frame, but I doubt it. they had few parts
Just an update. Got the digitizer screen over a week ago and have had the Note back in operation, but not permanently closed as I wait for the frame that you lead me to. The frame is now due on Tuesday I will have my tablet back and properly fixed.
Thanks again.
I dropped my phone yesterday and cracked my screen. I'm going to open a ticket with Asus since they're the only ones that can repair the screens it seems. Does anybody have any idea how much that would cost?