I was running a CM7 Kang that I found and it had a blue "CWM-based Recovery" is what it said at the top when in recovery. I went to flash a new ROM from that recovery and it seems to have f***ed my phone. I'm back on a red CWM but I have nothing on my internal SD. No ROMs to flash, no boot image, just a /Voodoo file with some logs in it. Since there is no boot image, my phone won't turn on past the Samsung logo. Any ideas guys?? I feel like I just need to figure out how to get a .zip file onto the internal SD but as of yet, I cannot. It boots perfectly fine into the |red recovery, but I can't do anything with it.
Easiest thing to do is start over and flash stock/rooted in Odin.
Rogers Stock: http://forum.xda-developers.com/showthread.php?t=1193927
ATT Stock: http://forum.xda-developers.com/showthread.php?t=1092021
Instructions are pretty clear cut so I'm not going to explain them here lol
When switching Roms (especially CM7 and MIUI) you need to flash from the same color CWM, if not, you get a soft brick or it just doesn't load the Rom.
Hooray!!
I tried to use the Odin return to stock from my Mac, but it's a Mac and it confuses and scares me. I found a friend's PC and it worked flawlessly. Thanks a million!
Related
Hi all, hope you can help. I installed clockworkmod recovery onto my wife's captivate, and now it won't boot - it's stuck at the "galaxy-S" screen.....I can get it into the YELLOW TRIANGLE screen and once managed to get it into the clockworkmod menu screen.
I believe the phone has android 2.3, not 2.2 on it and this might have been my mistake. The entry point into the kernel is likely different...
how can i fix this? do i need to remove clockworkmod and go back to the stock bootloader? The phone is not rooted, yet (that was the next step).
I haven't been able to find anything in the forums about people that have done (the stupid thing that I did) and installed clockworkmod on a 2.3 phone.
Thanks.
How exactly did you flash cwm? You shouldn't even be able to cause if 3e recovery signature verification?
If you can get to the yellow android screen, that's download mode. You're actually in a good place right now.
To fix where you are, take a look at the development section - there's a post about One-click stock packages. If you're sure she was on Gingerbread, grab one of the non-bootloader Gingerbread stock packages and flash that from download mode.
If you're not sure, I would suggest grabbing one of the Gingerbread stock packages with bootloaders (just to make sure).
In either case, see if you can find a one-click package with ClockworkMod Recovery baked into the kernel (it should say on the post which ones have it). That way you can flash what you want right out of the gate.
thanks. i am quite sure it has gingerbread. the person i bought it from said they did a kies update to 2.3.
i was following the instructions from the cyanogenmod wiki for the captivate: hxxp://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
after it finished installing the "clockworkmod recovery" i got into this bind. are those instructions for froyo only?
If you followed the instructions about flashing the speedmod kernel, that's where it's hanging. You've got a froyo kernel with a GB rom. Not a big deal, but Android isn't happy about it. Flash a stock GB package, or find a GB kernel with CWM (like boog's) and flash that and you should be ok.
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
dolhop said:
thanks. do i do this using ODIN or heimdall? I installed CWM using heimdall, and in my frantic reading i thought i saw something about installing stock bootloader/rom packages with ODIN after installing CWM could brick it? Or did I misread that?
Click to expand...
Click to collapse
Using heimdall is fine (it's also my personal preference between the two, but either will work).
With where you're at, you really shouldn't need to flash any bootloaders. That's pretty much the only area where there is a real risk of hard bricking the phone.
Since Heimdall worked for you once, I'd suggest grabbing the Heimdall one-click I made that's in my signature. You don't need to open it in Heimdall - just download, double-click it, and let it get ready to run. Then connect the phone in download mode and click "flash". You'll have the stock GB rom, with Boog's kernel and CWM all ready to go. You can then flash CM7 from recovery there (you'll probably have to flash it twice, though).
On a side note - flashing stock will wipe your apps. I'm assuming you backed everything up before this. If not, you might need to try and just flash a kernel first, do your backups, then go from there.
(Should you want to do that, go here, grab the one from the "Here is the odin flashable version flash it first if your on stock: Link Mirror" set of links, and then flash that in Heimdall.)
wow, thanks guys, i can breathe easier now. jmtheiss, i got it reflashed to UCKH3 using your one-click package (though now it is AT&T rather than rogers, but i really don't care as long as it works!).
does the one-click root application work with 2.3.4? or is there a more-preferred way to root it now?
Again, thanks so much for the assistance people!
In theory, you should already be rooted (I believe boog's kernel, which was in my one-click, is rooted). If not, go to the bottom of boog's 1st post, and grab the KH3 zip file. Flash that in CWM, and you'll have root permissions.
Or, if you're flashing to CM7, you can just do it from recovery as you are right now. I know from personal experience it works.
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
dolhop said:
thanks everyone. it all worked, and all is good. wife is not an angrybird anymore
Click to expand...
Click to collapse
Glad to hear that she's not flying over your house shooting explosive eggs. Always a turn for the better.
Had the same problem once before, odin fixed it aswell
Trying to help out my friend. He rooted his Galaxy S 4G and was trying out different roms and now it's stuck in recovery. He brought it to me--I can pretty much fix anything Android--I've helped a lot of people on XDA, but this one has completely stumped me.
I've Odin'd several different Official Stock restore packages, recovery packages, etc. Everything has the same effect, no matter the rom or the recovery, the phone will always (re)boot back into recovery. Selecting reboot system reboots it back into recovery. No matter what. I must have flashed Stock via Odin about 10 times today. Same results every time.
Right now it's stuck in the 3e recovery screen. But I can flash a Voodoo recovery, but it still gives the same effect.
Does anyone have any ideas? Is there a bootloader sequence anyone knows about, that he may have changed? Any help is appreciated.
Thanks everyone!
Follow the guide in the second link of my signature to fix.
Awesome! That worked! Followed the guide. I had already flashed stock, but I didn't know you could flash the bootloaders using a .jar package. It worked. I guess he jacked with his bootloaders.
actually, bootloaders would corrupt boot period. You'd be stuck in a "FIRMWARE UPGRADE FLASH FAILED" screen, or phone won't boot period. So, I think I know what the problem was.
When hopping from roms to other roms, specially on Kxx Based Touchwiz roms, your cache tends to get corrupted. Had you reflashed cache.rfs and a stock zImage using heimdall, it'd fix the issue, and data wouldn't vanish.
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
lonoguge said:
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
Click to expand...
Click to collapse
Where did you get twrp?
lonoguge said:
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
Click to expand...
Click to collapse
What is "another rom"?
lonoguge said:
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
Click to expand...
Click to collapse
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
bhundven said:
Where did you get twrp?
What is "another rom"?
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
Click to expand...
Click to collapse
I got it from what I thought was the official XDA TWRP thread but I'm not sure if it was official or not
at first I tried reinstalling codename but now I'm trying Beam (Tuk edition) and it seems to be working
TWRP Major Boot Loop
hey guys, im new here and i desperately need help with my phone!
the other day i was flashing a rom on my samsung galaxy s 4g. Things were turning out fine, until i had some complications on my phone.. so, i removed the rom. when i rebooted my phone, it went directly into the team win recovery project boot loop and every time i try to reboot my phone, it goes into the twrp. I also can't wipe anything and i can't delete anything! Does anybody know how I can solve this or is my phone basically bricked
more details would be helpful..
As in what rom, or what kernel.... etc... and make sure you have the corret phone.
Same problem with t959p
Looks like I'm not alone.......here's my story
the other day I wanted to switch from a stock rom to a custom, so I flashed redux 1.3 which was actually a froyo rom, and it started draining my batt like crazy so I flashed another rom on top of the froyo rom not realizing what I was doing and somehow messed it up cuz now it will only boot into recovery.
Now just to be clear I know this was my fault, I know I should have odin'd back to stock first, but I wasn't thinking at the time.....Ohh and just so you know I've flashed this sucker hundreds of times and was always able to get out of any mess I got in.
So here is the situation as it stands now, 3 button combo to enter download does not work. I can only get it into download with the jig I made. the problem is even in download mode none of my pc's will detect the device as a Samsung composite device, so odin will not see it. I've installed every possible 32 n 64 bit driver I could find including reinstalling kies. Kies wont even see it. I've tried flashing a few roms that I know worked and still it just boots into recovery. Now one thing I'll tell you is that depending on which rom I flash I can get recovery to switch from cwm to twrp. right now I left it with cwm 6.x.
what I need is a cwm flashable stock telus t959p rom complete with bootloaders or at the very least a cwm flashable zip file containing the bootloaders to see if I can recover the phone.
ohh and if your thinking about telling me to google search for the answer then don't bother.......I've spent the last 4 days reading posts and going to different websites and repositories trying to find something that would help me and so far nothing has.
the only thing that might work as a last resort is pushing the bootloaders as per one of raver's or whitehawks posts but it's a little more complicated for me as I would have to set up a laptop with Linux as I don't think i'll be able to pull it off with any of my windows pc's, win7 and win 8 only.
so if anyone has the files I need or can make them please let me know....or if you think you have another solution I could try i'm all ears err eyes.
thanks
Jedi
Have you tried heimdall one-clicks? Maybe it's showing up as gadget or something like that. I've had luck using zadig and heimdall to bring it back from the brink of death.
http://forum.xda-developers.com/showthread.php?t=1358498
EDIT
Woops replied to the wrong thread .
Nothing to see here, move along
Would like to revive a slightly dead thread.
I upgraded to a Galaxy S3 and no longer use my SGS4G for daily use. I had AOKP and disliked it, FC's and didn't like the feel. I have been trying to install a new rom ( old rom, VH Black Ed. ). Every time It loads into TWRP I have the ability to select the zip, install, it says complete, but reboots right back to TWRP menu. I've tried flashing CWM and it will install, flash the rom, reboot, and right back to this TWRP B.S... what am I doing wrong? I want to continue to use this SGS4g for music and internet duties.
How can I install CWM and have it stay even after a reboot? This TWRP is starting to me off
Did you happen to one click to stock before you went ham at the recovery?
Sent from my SGH-T959V using Tapatalk 4
My old phone got lost so I am using my Infuse again. I decided to update it since it is still on the old version from when it first came out. I was trying forever to update through the kies software until I realized I rooted it and so this won't work. So then I found out there are roms for way better versions anyways. So I found the Cyanfox rom and I wanted to do that, but I needed to first upgrade to cm9 so I went and downloaded the cm9 file and got the clockworkrecovery, and I installed it.
Now my phone will not turn on, it sits as samsung screen. And if you try to go to recovery it is just a messed up screen with all different colors as if the screen was broken. So now my only option to bea ble to install anything on it is through odin. I can get to download mode fine.
But this damn odin software will not detect my phone for the life of me. It literally will not work. I don't understand. I have spent hours upon hours on this between the past few days. I just want to update my damn phone.
Now I have to leave for work in 30 minutes and my phone doesn't work. This is just great.
How did you install CWM?
Sent from my Asus MeMO Pad 8"
Well I tried clockworkmod through the rom manager app, but I was running the android recovery 3e and it said I needed a modified version of that to be able to install 3e. So I replaced the recovery file with the one I was given, and then I manually installed cwm by naming it update.zip and running it on the recovery
The only problem was that every time I wanted to use cwm, it would go back to android recovery 3e, and I would have to click install again to get it to go into cwm.
Either way, it doesn't work anymore and I just need the damn thing to connect to Odin so I can flash it back.
Are you using a desktop or laptop? If desktop, are you using the USB ports in the back? If laptop, have you tried different USB ports? Maybe try a different computer? I've heard that USB 3.0 doesn't play nicely with ODIN so it's good to find some 2.0 connections. What Windows version? I've heard that Win8 can cause problems. Could also try Heimdall instead of Odin.
Unless I think of anything else, is the cable in good working order (recent successful file transfer)?
Alright. I got things working somewhat. I had to use different drivers for each program for it to be able to detect it. I don't know, its annoying as hell, but it worked when I went back and forth between drivers.
Anyways, I got my device restored. But the whole point of this was that I was trying to get to the KitKat rom(Cyanfox). I am still quite a few steps away from that. I am actually further away than when I started,
This is what originally happened: I had my device rooted(from when I last used it, 1-2 years ago) and had the 3e recovery. So I found out I needed a modified 3e so I could install Clockworkmod. Got that, all was well, and the thing basically got bricked when I went to update to a new rom. It wasn't the kitkat rom, but a CM9 rom that I needed to go to first so that I could then update to kitkat.
Now I got it unbricked, and I updated it using kies. So now I am on gingerbread. So then I rooted it again. So now I have the 3e recovery again, the only problem is when I go to system/bin/ there is no file called recovery, and I can put one there but it does not affect the recovery, it still looks for signed files, meaning I cannot install Clockworkmod.
Not sure what to do...
Seems everyone follows this process (looks like you already did step one) now....
1. Either use Odin or Heimdall One-Click. Follow instruction on how to do it.
2. While phone running install sgs kernel flasher from Market/Google Play.
2a. Copy/transfer Synthesis GB Kernel to your Internal SD card.
2b. Start up sgs kernel flasher and choose it from your Internal SD card. Phone will auto-reboot after done flashing.
2c. Wait a bit while your phone convert to new partition format and activate lagfix. Your CWM recovery version should be 2.5.1.3
3. Reboot phone into CWM Recovery and DISABLE vodoo lagfix and /system lagfix. Reboot once done. Phone will convert partition to old format. If you don't turn the lagfix off the phone will hang at Samsung logo when you install new rom.
4. Prepare your flavor rom/gapp for installation by copying them to your Internal SD card.
4a. Go into CWM Recovery mode and install the rom. You will need to do this twice since the 1st time was just a warning about partition format being different.
4b. Reboot once done. You will need to REMOVE the battery to power down the booting process and put it back in.
4c. Go into the New CWM Recovery and install the rom again since the previous attempt only install the new CWM Recovery.
5. Install Gapp.
6. a. Wipe: Cache / Factory Reset <--- Probably don't need it since it's new install from stock unless you installed stuff. Just to be safe.
b. Wipe: Cache Partition
c. Wipe: Dalvik Cache
7. Reboot
Click to expand...
Click to collapse
I never tried step two myself, as I found a flashable download for ODIN that did this for me. But mine is a Rogers phone (not AT&T) so that would not work for you. Hope this helps.
Thanks you so much man. I know that is just copy/paste but I didn't see it, and it works. I was looking in Cyanfox thread, never looked at the Beanstalk thread.
Anyways I am in the process of doing this and it seems like it will work. Appreciate all your help!
Edit: Boom. Worked like a charm. Thanks so much. I am very happy now The funny thing is, half the reason I wanted this is cause everyone was group messaging, and I didn't have that capability anymore when I lost my phone(I was on such an old version). Again thanks so much.