how to re align the screen in WAD application because if i press in upper right in my screen in WAD hoping that it will pop.up the option on the screen that ive pressed but somehow the pop.up will show somewhere but not in the screen where i press its like when i steady pressing the upper right the pop.up will go in the middle, or upper left something like that..
but in any application my screen is GOOD only in WAD s*cks
how to fix this?
thanks
help pls pls pls
Related
Can somebody help me please, I tried installing a cab of the HTC Action Screen app from the touch dual on my Herald, after installing I noticed that the top right corner of my screen was not responding to my stylus taps. tried realigning the screen still no joy.
So I uninstalled the app but I still have the screen alignment issue, is there anyway to fix this without a hard reset?
sorry if this is posted in the wrong section as I didnt know if this was just a herald problem or if everybody had this problem?
s4vva said:
Can somebody help me please, I tried installing a cab of the HTC Action Screen app from the touch dual on my Herald, after installing I noticed that the top right corner of my screen was not responding to my stylus taps. tried realigning the screen still no joy.
So I uninstalled the app but I still have the screen alignment issue, is there anyway to fix this without a hard reset?
sorry if this is posted in the wrong section as I didnt know if this was just a herald problem or if everybody had this problem?
Click to expand...
Click to collapse
It could be an old issue with a new device. Back in the day of PPC's it was found that some screen protectors slid under the case of the touch screen causing the screen to not respond appropriately. If you have recently put on a new screen protector or removed one, check the area just beyond the location where it is not responding. You might find something holding the screen down permenantly causing it to not respond. If there is nothing there and none of the things are present, I too am at a loss.
Just an idea.
Did you try a soft reset to remove the remnants of the application you removed?
@Just about right
Dont think it is the screen protector as I have had the same one on since I bought the device (almost a year now) without any problems.
@wovens
yep tried that
Ineterestingly if I open notes and tap the screen I get a dot in the right place, if I tap the top right corner it draws a vertical line downwards from the top right to the bottom. In the meantime what I have done is run the screen alignment, placed the styles in the middle of all '+' except the one in the top right corner. For the one in the top right corner I aimed a little lower than the centre, this allows me to click the X in the top right with the stylus if I aim above the box. not ideal but it will do for now as I dont have the time to reset this week...
Hi i realy hope i'm not doing the wrong thing here by opening i new thread, but i can't seem to find what i need anywhere.
i want to move the start menu to the center of the screen, so when you pres start it will open in the center, and not in the left corner (sorry realy bad english).
can anyone help me?
klemen
oh, i just remembered, isnt there a substitute for the start menu in spb mobile shell? is it posible just to have that?
you want to move the start button itself to the middle?
no the button can stay where it is, i just want the start menu to open in the center of the screen. not on the left
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
Seems your digitizer is gone.
Connect the device in active sync and then try MSP remote allignment.
Use search button, hope you'll find it...
regards
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
maybe the problem is that you dont tap at the screen right.
i had a similar problem before
look closer into the cross, you will see a white dot
tap right into the center and i think that will solve your problem
you just gotta be precise
I had the problem before. You need to change the touch screen,it cost about 20$
Try to shift the screen from horizontal to vertical (i had the same problem with an old rom)
It is hardware failure,that's all.I got one Alpine - xdaIIi like that.
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
buddy your touch sensor is gone.....i have the same issue......here's what you need to do:
Option 1: connect your phone to your pc via activesync, explore to windows directory and delete / rename the file called welcome.exe
Option 2: create a blank file on you pc called welcome.not and place it on the root of your storage card.
Option 3: use the MSP remote alignment.
Some people say event turning the device off then on again will kill the align screen but i can't say cause i haven't tried it.
after you're setup and all good, there would still be some applications that require a 'touch' some place....for that, since you (and i) don't have a touch screen anymore, the best thing to do is to get a MOUSE on your ppc
virtual mouse attached below.....just assign a hardware button to it to turn it on or off at will.....i use backlight button for it.....
P.S: was having some probs in uploading so i've renamed the file to .zip. just rename to .rar if you have problems extracting it
enjoy and PM me if you face anymore problems.
cheers
Hi junooni ,
I hv the same problem with my XDA IIs, and now my phone has been sitting in my drawer for 1 months.
Just some question, the above option that you stated above. After going through your option will the phone still be useable. I mean after that can i still used the phone to make a call since i need to use a remote mouse.
And also do i need to use activesync and connect it to my PC everything i need to use my XDA.
try taking out sim & memory card
i was also stuck on that.. this is how i got it solved, take out sim & memory card and to do it you need to take battery out as sim is under battery then hold two softkeys and reset button at same time and press 0 instead of x . now you should be able to go pass the align screen.... hopefully it helped....
Well.. it didn't help to me.. How can I browse windows directory via activesync? Am I so stupid or it's just invisible or what?
When you press the Start key there is an option in the bottom left hand corner to lock the screen, I was wondering if it would be possible to have in the opposite right hand corner the option to shutdown?
I know you can install various cab to have a shutdown link on the home screen or even in the start menu, but it would look nice to have it opposite the lock screen key.
Hi guys,
I was wondering if it is possible to move the start button from the top bar to the bottom tab bar. The background is the following:
I am using ProximityLocker on my HD2, which is a very useful app in my opinion. As the sensor is on the top left corner of the phone, everytime I'm wanting to tap "Start" my finger gets in the way of the sensor and the phone is locked, so I have to tap the start button very carefully in order to be able to open the programs page.
So, I would like to shift the start to the bottom or more to the right of the top bar.
Thanks in advance for any help!
digeradu said:
Hi guys,
I was wondering if it is possible to move the start button from the top bar to the bottom tab bar. The background is the following:
I am using ProximityLocker on my HD2, which is a very useful app in my opinion. As the sensor is on the top left corner of the phone, everytime I'm wanting to tap "Start" my finger gets in the way of the sensor and the phone is locked, so I have to tap the start button very carefully in order to be able to open the programs page.
So, I would like to shift the start to the bottom or more to the right of the top bar.
Thanks in advance for any help!
Click to expand...
Click to collapse
Flash any 6.5.X ROM...they all have the start button at the bottom. If you don't want to flash your phone....you are on your own then
bottom start menu
Or you can use Cookies Home Tab and select Startmenu to be your leftmost softkey
Cheers