Related
Ok im on lg thrill,I have all my drivers install,I have the lg,omap,etc installed.I hold the volume button up and plug up the phone,but it does not show the "detected new hardware,I also try the volume up plus power button and still no work,i am on windows xp,Ive been trying to do this for the last couple of days,what am i doing wrong???????
Make sure to double check that you did everything and installed everything as stated in the instruction thread. Run flashtool as admin. If still doesnt work, and this is only way it worked for me, do the power volume up but remove the battery. Thats how i was able to install the baseband after 2 days of trying.
Sent from my LG-P920 using XDA App
Have you removed the sim/micro sd/batery then do it. This is where i got stuck lol soon as i removed them all i just held the power n volume button for like 10 seconds i didnt release them till my pc noticed it
Sent from my LG-P920 using xda premium
so do i install the baseband first or the rom
ssfirme said:
so do i install the baseband first or the rom
Click to expand...
Click to collapse
doesn't matter...
I give up i tried every freaking way and cant get the baseband on this junk
ssfirme said:
I give up i tried every freaking way and cant get the baseband on this junk
Click to expand...
Click to collapse
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
danielkaboom said:
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
Click to expand...
Click to collapse
1. Do i uninstall the lg drivers also?
2. Do you mean the lg flash tool?
i did exactly the same as ssfirme , i found the original instuctions didnt work for me, i think for me the bit that made it work was removing the bettery before connecting it to the computer for a second time as this step isnt in the original instructions
Well, I have LG Optimus P-920
since morning working on CM 7 Nightly 23
today I was replaced sdcard to 32GB 10, reboot phone and.... nothing
even pwr+vol up not working, totally not responding
I've tried reflash on LG flash tool but after connect to usb with vol up computer recognize omap4430, thats ok, but that device blinking in device manager, one second is there, one not , no LG USB CDMA serial port
what should I do in that case, please help me
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
winb87 said:
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switching back ?
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
winb87 said:
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switched back, still no response..:/
I posted a thread with the same issue a few weeks back.
No, it's not the end of your phone. You'll need xp/7 to repair the phone (since I'm on linux I can't currently repair it).
Use the LG tool, remove battery and insert it back, plug in usb and hold pwr+volup(or down) can't remember which one. Your PC will find a OMAP4430 device.
There is a few threads how you can repair your phone using emergency mode in the LG tool, you'll need to enter your IMEI etc.. Look in the Development section and look for the right thread.
My thread:
http://forum.xda-developers.com/showthread.php?t=1439373
I've tried that resolution, but t dont works, omap4430 blinking in device manager, cant use lg flash tool
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
w8st8 said:
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
Click to expand...
Click to collapse
I think...... but I'll try again
trying......still blinking
please give me what should i do step by step, any sequence I tried doesn't work still blinking
Remove battery and blink will stop!
ul71m0 said:
Remove battery and blink will stop!
Click to expand...
Click to collapse
still blinking, even after battery removing
andriu123 said:
still blinking, even after battery removing
Click to expand...
Click to collapse
Try reading this
http://forum.xda-developers.com/showthread.php?p=21096612
good luck
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
vanpe said:
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
Click to expand...
Click to collapse
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
andriu123 said:
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
Click to expand...
Click to collapse
You tried to install the drivers from xp? I'll try this before use the warranty.
How much time have your O3D?
tried on XP, Vista, 7
O3d have since about six months
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
MemoryController said:
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes I have tried differents USB cables (3 concretely). I'm desperate.
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
josuelopezv said:
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
Click to expand...
Click to collapse
Where do you get the omap drivers? Automatically whit the O3D in emergency mode?
My computer detects that driver but not install it, seems like a bucle try/error/try/error.
HELP!!! IVE FULLY BRICKED MY LG P920 COMPLETELY!!!!
help me! I accidently erased my bootloader (dont ask why)
If i try turn my phon on, nothing happens, not even the logo!!!!
I i connect it to my computer, it goes into a neverending loop of "found...lost...found...lost..." Any help whatso ever will help.
Phone: cm7 nightly (2.3.7) v20a.
THANK YOU!!!
I dont want a £500 brick!!!!!!
EDIT: I have fixed my phone!!!! I bought a new motherboard for it and now it works fine This seems to be the only way, a new board.
Do you connect it to your computer holding vol up key?
arsen4oo said:
Do you connect it to your computer holding vol up key?
Click to expand...
Click to collapse
ive tried this, but no luck
Tried this? http://forum.xda-developers.com/showthread.php?t=1244490
If I remember correctly, you have to be quick to install the driver when connecting the phone to your computer.
Fusel Wusel said:
Tried this? http://forum.xda-developers.com/showthread.php?t=1244490
If I remember correctly, you have to be quick to install the driver when connecting the phone to your computer.
Click to expand...
Click to collapse
Ive tried this but no luck, i get to the pluging i part but the volume up thing doesnt work, the driver installation isnt there.
Did you format the SD card with CM7?
If you did that, you can send it right away for the tech support.
omgomg said:
Did you format the SD card with CM7?
If you did that, you can send it right away for the tech support.
Click to expand...
Click to collapse
That is EXACTLY what I did. Do you you meen to take it to a repair shop?
thankyou
in what universe is this worth 500 quid?
Sent from my LG-P920 using xda premium
yep i formated my sd card on cm7 full brick no omap had to take it in
Updating ICS on my NEXUS Sroke my broke my root access.Updating ICS on my NEXUS S
Hi,
Can any one help me in getting back my root access? I rooted my Nexus S while on ANdroid 2.3.4 and while i updated it to ICS, it broke my root.
Please help me.
The phone is in unlocked status but i dont have root privilages.
hefonthefjords said:
in what universe is this worth 500 quid?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I bought it when it first came out, and it was worth £500
kartha87 said:
Hi,
Can any one help me in getting back my root access? I rooted my Nexus S while on ANdroid 2.3.4 and while i updated it to ICS, it broke my root.
Please help me.
The phone is in unlocked status but i dont have root privilages.
Click to expand...
Click to collapse
Please, get in your correct device section.
This issue was thoroughly discussed at another thread, and the only way users found to solve it was to deliver it to LG for a new board.
The sd format under CM7 issue, I mean.
I had this happen to me all the I apparently pressed reboot into bootloader by accident and my phone turned off and never turned back on. I was also running cyanogen mod. I tried everything but nothing worked it didn't even turn on so I just went to att and they sent me a new phone.
Sent from my LG-P925 using XDA
omgomg said:
This issue was thoroughly discussed at another thread, and the only way users found to solve it was to deliver it to LG for a new board.
The sd format under CM7 issue, I mean.
Click to expand...
Click to collapse
AeRo0 said:
I had this happen to me all the I apparently pressed reboot into bootloader by accident and my phone turned off and never turned back on. I was also running cyanogen mod. I tried everything but nothing worked it didn't even turn on so I just went to att and they sent me a new phone.
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
I will send it to lg to fix then, thanks
I dont think it is possible to brick the optimus 3d. The issue of not being able to reflash may be due to driver conflicts/combo of windows 7 etc.
Run device manager. Expand the ports and usb serial bus controllers
Take out battery of optimus 3d
hold down volume up and while holding up, insert cable.
There should be the omap 4430 popping up for a few seconds
Also during this process, the other usb drivers for the phone should be activated and displayed if they were previously installed. If not, then it should start searching for the drivers and update.
Insert battery
If there are issues with drivers updating, try another pc and install the lg drivers from scratch using windows xp.
Its not required to install the omap 4430 driver to flash a rom
You can then use the official lg recovery tool, enter your imei and it will download and install the stock rom
There are other methods on flashing using kdz files (a good tutorial is available somewhere in this forum) you would need to block the lg updater from checking however
Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?
anyone?
Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium
Bdadd34 said:
Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
just watch trekfan's video. he shows a little trick with the battery.
kevin_23 said:
Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?
Click to expand...
Click to collapse
the easiest way is to just download the software update LGMobile support tool
http://www.lg.com/uk/support/mc-support/mobile-phone-support.jsp
launch the software. Take out battery, attach usb to pc, then hold volume up and power at same time, the software will see phone, select customer support then recovery or something like this – type IMEI number and then software will just re download and flash the phone to repair. the phone will have power for the flashing via the usb. when it finished just re attach battery and turn phone on.
If omap4430 keeps connecting and disconnecting,neither lg flashtoor nor lg mobile updater will help in this case.
You need to find a 2nd stage bootloader for the phone or see if LG agrees to repair it.
btw I'm in the same boat
Thread will be moved. Based on the fact it's not:
A ROM [X]
Mod [X]
Kernel [X]
Thank you for your compliance, hope you get your phone working.
If someone could modify the omapflash tool for o3d,the problem would be resolved.
thanks for all reponses, and and how could solder the USB cable? what tools I need or where I could do?
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
iqb043 said:
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
Click to expand...
Click to collapse
Yep it always does that to me. Omap is con and disc always for me and i never bricked my phone. Use the metod above and u shoud be grand.
Sent from my LG-P920 using XDA
what did you flash to your phone that caused brick?
Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...
sergiocues said:
Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...
Click to expand...
Click to collapse
+1
Sent from my LG-P920
search resurrection guide
Send from my XBSA ICS V7.2 P920.
I tried it, but I cannot do nothing, because omap still connects and disconnect
thats what it does
Send from my XBSA ICS V7.2 P920.
I have the same problem........i bought this phone long time ago and i just found it while cleaning my room........i thought that maybe i should update it since its still running Gingerbread.....i tried almost everything but nothing seems to be working...omapboot is not working, lg flashtool is not working...the phone is not showing any signs of life.....the only time it responds is when i connect it to my pc and it shows up as OMAP4430 TI Board.....
HELP NEEDED, I dont want to loose this phone
Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.
This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5
Thanks
TMProduct1onZ said:
This doesn't belong here..
However...
Cosmo drivers = omap4430 drivers
so just install the omap drivers like you did before to flash ics.
Edit: for the connect/disconnect problem..
Just keep battery in, hold vol+ and connect usb (hold vol+ until you see s/w)
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...
fadhli7 said:
Thanks, but I cant seemed to install the OMAP Driver even b4 installing ICS. It just says windows cannot find.... I tried doing this manually but still get the same respond. Also when I try to flash back to my original rom, it keep restarting it over and over again at lg logo. The Lg logo last abot halve a sec b4 restarting. So I did reflash back to ICS and it works. But still no network etc...
Click to expand...
Click to collapse
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.
OK!
kalamake said:
Some tips.
Need to use twrp recovery to install stuff. Cwm uses vol+, twrp vol- to enter recovery(or was it vice versa). Cwm old version doesnt work with xbsa404.
I had brick also, lg logo and reboot. WIn 7 found lg serial port. Used flashtool and change port to 41 or if it is that change to 42.
Then flasher should found lg and flash it.
To get network you need new kernel.
Click to expand...
Click to collapse
The thing is when I flash to ICS, my recovery is gone plus after I reflashed to ICS, the phone will froze for a few seconds and then back to normal. This keeps repeating.... Also if ur talking abt rooting, I cant coz it says invalid ap path.
fadhli7 said:
Help, I cant root it nor use lg flash tool because the usb is recognized as cosmo driver and I need to find the driver software.
Also, I cant seem to get signal since I cant use lgflash tool to flash baseband... Any ideas how?
I can access the sd card though. When I remove the battery and pressed the Vol up button, the OMAP driver keep connect and disconnect too and I cant seemed to install it, I'm using windows 7 bytheway.
Baseband is not XBSA404 but instead its the original korean baseband. I can't flash any baseband too.
Click to expand...
Click to collapse
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app
ferel said:
I dont really understand where you stuck exactely and what you did but regarding the cosmo driver:
To install the cosmo drivers for windows xp I downloaded and installed the lg pc suite software ver. 4 something and my phone was connected to the pc under software installation.
For win 7 64bit the driver was automatically installed by windows but you can try lg pc suite with win 7 too.
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).
fadhli7 said:
Whenever I wanna root my phone, it says cannot find specific file or folder. Plus I can install wkpark boot because I cant install the OMAP driver eventhough I directed it manually. When I tried on other laptop, I managed to successfully install the driver, but it still connect and disconnect ( u can hear by the sound ).
Click to expand...
Click to collapse
What do you do exactely and what is the error message exactely pls.
For the root you need the lge cosmo driver.
It is correct this wy... connect and disconnect all the time. It means it is ok if you installed the driver.
To install those omap drivers you either needs to be fast to click on them when the ti omap appears or there is a solution to see the already attached devices in thr windows decice list, I saw it somewhere here but i do not remember in which thread.
Sent from my GT-N8000 using XDA Premium HD app
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck
satubsatub said:
you can get OMAP4430 driver by downloading wkparks fastboot loader from http://forum.xda-developers.com/showthread.php?t=1971014
extract it and you should find it on usb_drv_windows
to install it you can follow this guide http://forum.xda-developers.com/showpost.php?p=32955612&postcount=3 which taken from http://forum.xda-developers.com/showthread.php?t=1942836
good luck
Click to expand...
Click to collapse
Yup, I tried installing the driver many times but to no avail... Thanks for the help anyway... :good: