hello
i find that none of Rom can install on my i9003 phone.
i mean 3 file Rom, also official rom like I9003XXKPE
also download mod is enable but i cant enter on recovery mod.
power+home+vol up isnt work
<OSM> All threads completed. (succeed 0 / failed 0)
this error show on odin log.
nimafire said:
hello
i find that none of Rom can install on my i9003 phone.
i mean 3 file Rom, also official rom like I9003XXKPE
also download mod is enable but i cant enter on recovery mod.
power+home+vol up isnt work
Click to expand...
Click to collapse
1.Does the phone get detected in odin when u connect the phone to pc via usb? when u connect the phone shld be in download mode which u probably know.
how do u know if its detected?
u will see a yellow box " COM [ur port number]"
also you will see "Added" in bottom left box
2. When flashing kpe, how many files did u select and also the respective boxes.
like which file u selected as pda, which one as modem....
3. did u select repartition box?
4. Did u see "RESET. OK!" in odin after flashing?
edit: saw ur 2nd post after posting my reply.
ans no 2 and 3
let me introduce :
now phon is on downloading mod:
connect phon with usb cable to computer(wondows 7 ultimate 64)
then open odin and place
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar >>> bootloader
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar >>> pda
GT-I9003-CSC-MULTI-OXAKPE.tar >>> csc
latona_20110114 >>> pit
MODEM_I9003XXKPE_REV_00_CL1041909.tar >>> phone
id: com isnt yellow. its white.
also usb debugging has enable.
...
Your phone isn't detected by the pc....
what should i do now?
is it necessary to install kies ?
nimafire said:
what should i do now?
is it necessary to install kies ?
Click to expand...
Click to collapse
Hi Nimafire,
you are doing wrong here:
because you cant go to download mode by volume up+home button+power,
you need to press VOLUME DOWN+HOME BUTTON + POWER
and make sure that kies and all the drivers are installed...
problem solve after installing kies
ok i have install kies and COM is change to yellow .
then enter downloading and try to install rom:
this is my odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
nimafire said:
ok i have install kies and COM is change to yellow .
then enter downloading and try to install rom:
this is my odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
cant remember whether its 0 in both succeed and failure.
but does ur phone get rebooted automatically after flashing is completed?
nimafire said:
hello
i find that none of Rom can install on my i9003 phone.
i mean 3 file Rom, also official rom like I9003XXKPE
also download mod is enable but i cant enter on recovery mod.
power+home+vol up isnt work
Click to expand...
Click to collapse
Do 1 thing Go to this link http://forum.xda-developers.com/showthread.php?t=1004647
Then download the 2.3.6 xxkpq firmware. Extract the rar file and then u will see only one .md5 file in the extracted file. Select that file as pda in odin and hit start! Works for me everytime! Make sure u have kies and the drivers properly installed! Hit thanks if i helped u!
Related
So I have been trying for hours to get into download mode...and I am in. Before I was getting the repeating galaxy s 4g screen and then nothing. Well I tried to flash kc1 (hawk.zip) and this is what it said.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T959VUVKG4_CL385158_REV00_user_low_noship.tar.md5 is valid.
<OSM> T959VUVKG4-Phone-CL1037720.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is still in download mode and I am afraid to unplug it because it will take forever to get into it again! what can i do???? please help!
press the reset button on odin and download the KC1 deodexed file from whitehawkx and odin that then just odin back to your desired odin rom
Try downloading this and Odining:
http://forum.xda-developers.com/showthread.php?t=1193751
pammie, one last thing to try if you are going to gb:
http://forum.xda-developers.com/showthread.php?t=1217491
Hi,
I tried rooting my galaxy S5 using CF-Auto Root by ChainFire. But I get the following error in Odin and my phone doesn't get rooted. Can anyone help me, please?
This is the message I get from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
jocooljocool said:
Hi,
I tried rooting my galaxy S5 using CF-Auto Root by ChainFire. But I get the following error in Odin and my phone doesn't get rooted. Can anyone help me, please?
This is the message I get from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Shows NO error .... Did you even press "start" ?
Uninstall Samsung KIES before using ODIN
LS.xD said:
Shows NO error .... Did you even press "start" ?
Uninstall Samsung KIES before using ODIN
Click to expand...
Click to collapse
HI,
I pressed start. Have tried a few times already. I don't have Samsung kies installed. I'll try on another pc and see.
jocooljocool said:
HI,
I pressed start. Have tried a few times already. I don't have Samsung kies installed. I'll try on another pc and see.
Click to expand...
Click to collapse
Are you using the latest ODIN version?
I'm using 3.07 version . It was together in the zip file. Just tried in a different pc. Same results.
Sent from my SM-G900F using XDA Free mobile app
jocooljocool said:
I'm using 3.07 version . It was together in the zip file. Just tried in a different pc. Same results.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Latest Odin --> LINK
Managed to root my phone. My computer was blocking the Samsung phone drivers from being installed. That was the problem.
Sent from my SM-G900F using XDA Free mobile app
My phone just boots to the "Saumsung Galaxy Note II" screen and it is stuck there. I dont think its a loop because it doesnt loop (by that I mean it doesnt disappear and appear).
I m afraid using odin would erase everything.
I want to save my data, what should I do? Which rom do i use?
I tried downloading 3 to 4 note 2 roms but they all failed in odin.
Please specify what I need to download in order to save my data.
At this point, I am also ready to just give up and restore factory settings. I went to the at&t technicans, who are completely useless and they used their roms and couldnt help at all. I went to a fix phone place and they couldnt do anything either.
Please help!
Ummmm do you know that you posted this in the s6 forum and not the note 2?
Sent from my SM-G920V using Tapatalk
i know but no one is capable of answering there.
Flash the stock Note 2 firmware on your phone via Odin. It should restore it to normal. Below are the stock firmware from Sammobile. Just pick the one from your country.
http://www.sammobile.com/firmwares/database/GT-N7100/
i tried the US version first.
http://www.sammobile.com/firmwares/confirm/13212/I317UCAMA4_I317ATTAMA4_ATT/
yinxzon said:
there is no US version..
Click to expand...
Click to collapse
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN
se1000 said:
Verizon: SCH-i605
AT&T: SGH-i317
T-Mobile: SGH-T889
Sprint: SPH-L900
Choose the right one, download, and flash via ODIN
Click to expand...
Click to collapse
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
yinxzon said:
sorry i found it but it doesnt work.
this time it didnt fail.. just says (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Are you putting the phone in download mode?
se1000 said:
Are you putting the phone in download mode?
Click to expand...
Click to collapse
yes it is. says downloading do not turn off target！！
yinxzon said:
yes it is. says downloading do not turn off target！！
Click to expand...
Click to collapse
Make sure you have the right drivers and the odin box shows blue
se1000 said:
Make sure you have the right drivers and the odin box shows blue
Click to expand...
Click to collapse
Failed! Drivers should be installed as it shows up on device manager after I installed Kies 3.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
downloaded both roms and both failed again
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You haven't said how this happened...
Did you flash a custom rom then it failed to boot?
Do you have custom recovery installed?
Tried odin on another computer or different USB port?
I had strange errors like that when I used a different usb cable. Went back to the genuine samsung one that came with the phone and it was ok.
Also, make sure Kies isn't loaded when you are trying to flash.
Your phone was stuck in boot screen. You could just have it factory wiped your or reset cuz the system files were corrupt and can't fully load... now that you may or may not have damaged the rom from flashing different flash file. Say good bye to your data... you have to search for the stock rom of your unit and search for tuts on how to use heimdall...
Sent from my HUAWEI P6-U06 using XDA Free mobile app
I downloaded various custom roms, all of which failed once this happened. I havent tried odin on a different computer and I only have one usb on my surface pro 3. I will try another computer.
I am using the original USB.
What do you mean Kies isnt loaded... I am using the Kies md5???
darqo, i am using the stock rom.
heimdall doesnt work either.
when installing the driver on zadig i only see the gadget serial and i dont see the samsung driver for me to update.
if it detects your device it can flash it use heimdall to fix your kernel preloaders and be sure to download the apropriate flash files.... some russian forums has lots of stock roms to choose from. what seems to be the usual error, is the first thing you must start with. dig on google for some tuts to resolve the error. in my case i disabled samsung kies. i only used its preloader drivers to detect my device. then used other software to fix it... i had that problem too with stuborn drivers. i used usbdeview to remove unwanted drivers the keeps bugging the program the instal the usb drivers from samsung kies program folder... you need a clean pit file for your device and fresh stock rom, a clean or fixed cache.rfs, dbdata.rfs to fix corrupted partitions of your unit...
''SOME DEVS ARE LAZY THESE DAYS, CAN'T BLAME THEM THEY NEED TO EARN A LIVING''
Sent from my Connect-V3 using XDA Free mobile app
Hello,
I downloaded a PDA from this guide on XDA:
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/odin-gt-p5100-4-2-2-stock-rom-t3022183
followed the instructions, but I forgot to see if ID:COM is turning blue, and it didn't, but I pressed start. I got this message on Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDNA1_P5100NEEDNA1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Odin won't recognize my TAB? on Odin I press AP button and select my md5 file, but ID:COM won't change.
**Edit: I also tried an older version of Odin, Odin 1.85. and I got this message: (On this Odin it did show 0:[COM3])
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDNA1_P5100NEEDNA1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
My recovery is TWRP
What can I do?
Thanks!
verynoob said:
Hello,
I downloaded a PDA from this guide on XDA:
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/odin-gt-p5100-4-2-2-stock-rom-t3022183
followed the instructions, but I forgot to see if ID:COM is turning blue, and it didn't, but I pressed start. I got this message on Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDNA1_P5100NEEDNA1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Odin won't recognize my TAB? on Odin I press AP button and select my md5 file, but ID:COM won't change.
**Edit: I also tried an older version of Odin, Odin 1.85. and I got this message: (On this Odin it did show 0:[COM3])
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDNA1_P5100NEEDNA1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
My recovery is TWRP
What can I do?
Thanks!
Click to expand...
Click to collapse
try with different set of USB cables or USB ports. check you have Samsung USB drivers installed. remove kies, if installed.
go to recovery mount/unmount data
billysam said:
try with different set of USB cables or USB ports. check you have Samsung USB drivers installed. remove kies, if installed.
go to recovery mount/unmount data
Click to expand...
Click to collapse
Thank you, I tried all ports, didn't help.
I have no Kies installed, and about drivers: If Windows recognizes my P5100 (It appears on my computer and I can access the files) doesn't it mean that drivers are installed?
Perhaps it's the usb cable? I bought a cheap one from eBay after the original one broke (after a few years )
Thanks
verynoob said:
Thank you, I tried all ports, didn't help.
I have no Kies installed, and about drivers: If Windows recognizes my P5100 (It appears on my computer and I can access the files) doesn't it mean that drivers are installed?
Perhaps it's the usb cable? I bought a cheap one from eBay after the original one broke (after a few years )
Thanks
Click to expand...
Click to collapse
Nope, it's not the USB cable since it shows at ID:COM in Odin 1.85.
Did you tried mount/unmount data from the custom recovery and then flashing from ODin?
billysam said:
Nope, it's not the USB cable since it shows at ID:COM in Odin 1.85.
Did you tried mount/unmount data from the custom recovery and then flashing from ODin?
Click to expand...
Click to collapse
Not yet because I've actually installed Andy's unofficial CM 13 (Android 6.x) and it's working quite well
*Edit: Is the 4.2.2 official JB from Samsung? I mean, why would they update such an old tablet after such a long time anyway?
**Edit 2: I went to TWRP recovery (2.8.7.2), and clicked Mount, I un-ticked the 'v' next to Data, but it didn't work. Also, after I restarted and went back to recovery I saw that there is a 'v' next to Data, as if it didn't really unmount anything? Why didn't it let me umount Data? (Or after restarting, it mounts it back?)
verynoob said:
Not yet because I've actually installed Andy's unofficial CM 13 (Android 6.x) and it's working quite well
*Edit: Is the 4.2.2 official JB from Samsung? I mean, why would they update such an old tablet after such a long time anyway?
**Edit 2: I went to TWRP recovery (2.8.7.2), and clicked Mount, I un-ticked the 'v' next to Data, but it didn't work. Also, after I restarted and went back to recovery I saw that there is a 'v' next to Data, as if it didn't really unmount anything? Why didn't it let me umount Data? (Or after restarting, it mounts it back?)
Click to expand...
Click to collapse
Samsung released JB for tab 2 long ago and that too they didn't bother to update for all the regions they shipped initially.
so we all flashed whatever region we got the JB firmware from.
close any other program running on your pc. absolutely no kies, no anti-virus.
try with different odin or use odin multi downloader 4 versions.
it should flash.
I was trying to root my SM-G920F ,which is running Android 6.0.1, when i received the following message on Odin3.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
the phone was in download mode (Odin) and the developer option is On as it is the case with USB debugging, also the reactivation lock is off.
Android version : 6.0.1
Baseband version : G920FXXU4DPI9
Kernel Version : 3.10.61-8821257 Sep 16 2016
Build Number MMB29K.G920FXXU4DPIL
KNOX Version : KNOX 2.6
ANY help will be appreciated.
CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Click to expand...
Click to collapse
You're trying to flash wrong file. Try this;
https://download.chainfire.eu/733/CF-Root/CF-Auto-Root/CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip
boogiesamy said:
did you tried it with cf autoroot? make sure you also have enabled oem unlock in developers options, if still not work try to flash an older firmware in phone
Click to expand...
Click to collapse
I'm couln't find "OEM UNLOCK" anywhere
forumber2 said:
You're trying to flash wrong file. Try this;
....
Click to expand...
Click to collapse
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
boogiesamy said:
Just flash this firmware version: https://drive.google.com/file/d/0BzcqBQZhElPfZ0lhcHR2RmdRUFk/view?usp=drivesdk
After flash hard reset, then try to root with cf autoroot again
Click to expand...
Click to collapse
Can you please point me to a guide ?
emGiin said:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
Click to expand...
Click to collapse
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
forumber2 said:
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
Click to expand...
Click to collapse
Yes i was using the in-built Odin and the phone was in download mode, i'll try another usb cable.
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
boogiesamy said:
Use this step by step guide on flashing full firmware https://simunlockremote.com/how-to-flash-using-odin/
Click to expand...
Click to collapse
It's not related the installed firmware.