Database Info

[Q] Fix brick? (failed theme update)

I tried to install an update on my Galaxy S 4G to my Gingerbread theme on KD1 and I can't get past the original boot screen.....is there any way to boot into CWM? I installed it, except i can't seem to boot into recovery.
Any ideas?
I'd like to use ODIN as a last resort (and yes, download mode does work.)

If it doesn't boot pass the Samsung screen then you'll have to use Odin to fix. I had a similar issue this week with thay
Sent from my SGH-T959V using XDA App

I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!

pepuhz said:
I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!
Click to expand...
Click to collapse
Pull out your battery. With your phone unplugged put your battery in but leave it powered off.
Plug your phones cord in your PC. Just the cord not the phone.
Now hold just the volume up and down buttons. While holding the buttons in plug that cord from your PC into your phone. You will see a yellow triangle or if your firmware is messed a symbol with a small phone and a computer. You can use Odin either way. You will see Odin recognize the phone if its done correct and you have the Samsung usb drivers installed.
Sent from my SGH-T959V using XDA Premium App

I know I have to be doing something wrong. I have read everything everywhere and have a Samsung Galaxy S 4G & Vibrant 3G T959 BOTH stuck in recovery. Haven't touched them in about a week buttons just checked & still they go through the load to the TMO chime then black or I can get to download & recovery but have mounting issues. The Vibrant was rooted & SGS lost root when flashing joedevelopers rom (placing no blame on thread just providing information for possible help).
I read somewhere yesterday about using NVFash or SuperOneClick to get it going but each search leads me to instructions for other devices. I don't want brick either phone using the wrong files so I'm pretty much stuck.
Would appreciate instructions if anyone has the answer. I really have tried everything. The SGS was stuck at the phone ! computer screen shot first but the reloading the drivers and piecing together some code brought it back & now the SD card is not ready.
Sent from my Bionix 2 - A TeamWhiskey Production using XDA Premium App

[Q] Won't even turn on...

Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!

tyler611 said:
Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
Click to expand...
Click to collapse
Wow... Dude... You are offically bricked. Samsung can only help now.
Not trying to be negative, but you really shouldve read the instructions!
:-(
Sent from my SGH-T959V using XDA Premium App

I think I am in exactly the same boat as the OP. What is the best way to resolve this? Bring it into T-Mobile? Send it in to Samsung somehow? Is there a number to call for warranty repair or something?

Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App

stephen_w said:
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I did the same thing as the OP. ODIN wouldn't recognize the phone. Ended up letting it sit overnight and then ODIN worked.
If you are flashing ROMs you should probably get a jig.
This guy is a forum member and great to deal with. (can't post the link) go to mobile tech videos dot com

Leave the battery off for a few minutes. Try Odin 1.85 to see if it recognizes the phone
Sent from my T959 using xda premium

Please use the Q&A Forum for questions Thanks
Moving to Q&A

Odin not working

I tried using odin to go back to jf6 and its all good until it says Do not turn off target. then it stays there and when i try to reboot my phone is bricked, any advice. also please dont close this topic, i cant post in the development forums and all i want is some help. so how do i get out of a brick and odin i897ucjf6-final-ocd isnt working?

Is it hard or soft bricked? Soft bricked phones are not difficult, in fact, I'm working on a one-click unbrick for soft bricked phones right now.
If it's hard-bricked, black screen, acts like it's off, then you've got no choice other then JTAG or repair center.

hopeless111 said:
I tried using odin to go back to jf6 and its all good until it says Do not turn off target. then it stays there and when i try to reboot my phone is bricked, any advice. also please dont close this topic, i cant post in the development forums and all i want is some help. so how do i get out of a brick and odin i897ucjf6-final-ocd isnt working?
Click to expand...
Click to collapse
Yes, I've seen this too and it scared me a little the first time. It's most likely just a soft-brick. I take it you see some icon about Phone != Computer? I had this problem using Odin One-Click for JF6 when I didn't follow the instructions exactly because I thought some steps were unnecessary. Try this:
1. Power off unit and remove all connections.
2. Remove battery, sim card and SD card.
3. Connect USB cable to computer.
4. Start Odin One-Click
5. Re-insert battery only.
6. Hold down Vol up+down.
7. Connect USB cable to Captivate while still holding volume buttons.
8. Start the Odin download.
And you should now be back it download mode and loading up JF6. Once it reboots, you should have a Stock AT&T Captivate.

If other versions of odin3 or oneclicks don't work try A10 TOOLBOX/ CAptivate toolbox. Used it over 50 times with all different. Revision versions. Works like a charm. alot of Galaxy s / varients are cursed with this Odin/computer dreadful recognize problem. Also keep in mind Odin may choose to only work for one particular USB port. Gotta play around alot
sent from SGS Captivate 2.3.4 with CM7 or MIUI using Escapist or TKglitch

rwells813 said:
If other versions of odin3 or oneclicks don't work try A10 TOOLBOX/ CAptivate toolbox. Used it over 50 times with all different. Revision versions. Works like a charm. alot of Galaxy s / varients are cursed with this Odin/computer dreadful recognize problem. Also keep in mind Odin may choose to only work for one particular USB port. Gotta play around alot
sent from SGS Captivate 2.3.4 with CM7 or MIUI using Escapist or TKglitch
Click to expand...
Click to collapse
It's actually AIO Toolbox. Love the tool. It's a great tool to help people flash ROMS if they need a little help.
AIO Tool Box

have you restarted your computer? I have to do that occasionally in order to get odin to start working again.

[Q] Bricked new phone need help

i recently bought a samsung galaxy s 4g, and i used odin and flashed a sidekick (my brothers phone) rom on accident.
cant get to the download mode
cant get to the recovery
cant power on the phone
it hasnt yet been 30 days since ive had the phone, so could i take it back to the store and just say its not turning on can i get an exchange?

Yeah just say it wont turn on
Sent from my SGH-T959V using XDA App

Or you could follow the directions posted in this link to unbrick, as posted by Jager in the General SGS4G forum.

That method worked for me but its cause I flashed the correct phone deivce rom he didnt
Sent from my SGH-T959V using XDA App

It still may work.
Sent from my SGH-T959V using XDA Premium App

It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
*I think this method shown on Rootzwiki I discovered first but never posted. It happened while flashing 1st Audiophile. LOL... anyway, w/e. Good luck!

cj_31 said:
It happens to me all the time. Just plug phone to computer holding volume up and down at same time. It shows the phone-cable-pc thingy and that's download mode. I went into that when I failed to Odin by mistake and just decided to try to Odin while in that "mode" and it did flashed. Hope this helped.
*Have Odin open before you plug cuz' that way you know it found the device.
Click to expand...
Click to collapse
Try this even if the screen stays black/off, as long as Odin recognizes it (You'll get the yellow box with COM# in it) these steps will help.

Stuck on download screen, but not in download mode.

I searched for three days before posting this, hoping for an easy answer. I tried to flash the GOV33 Lean Performance ROM last week and ran into a few problems. I followed the instructions and wiped the phone back to factory, clearing everything several times. I then tried to flash the rom as directed, but it acted like there was no phone present, so due to a lack of free time I gave it up as a bad job and started using the sidekick normally with the fresh wipe. No problems until yesterday. For some reason, for the entire day, the phone would not connect to the Tmobile network. So, when I got home I held down the power button to reboot it, and when it rebooted, it showed the downloading screen with the yellow triangle and the android with the shovel. Since then it has done and shown nothing else. I can't get my computer to recognize it to Odin it back to factory, and no button combination does anything. I am totally stuck and am inches from calling this phone bricked and letting my son shoot it.

Well I'm somewhat of a noob when it comes to Samsung phones, even with all the crazy **** I've done to this one occasionally I'm at a loss. Is it possible you have a sticky button somewhere? Like forcing download mode even after a battery pull? Also do you for sure have the proper drivers installed or rules(for Linux) to use download mode? Have you tried hiemdall? Have you tried a different USB cable or different computer?
Sent from my Nexus 7 using xda premium

This may be due to faulty odin . I'm not a wizard hell I look to ric an this wizard above me for help ahah xD
Ill ask a few questions first
Can the plug be falty an not reading the phone?
Are any of the buttons "sticky" in the term when you press is down it doesn't give the nice load click but kinda slowly pushes it?
Did you try this way for odin vvvvvvv? (Its my personal way I odin as it doesn't read most times on my old pc)
But yea my phone doesn't get reconized for awhile when trying t odin what I do is go into download try to odin if it doesn't work I pull the baatter an put it back in which will lead to odin with a different image then from there you want to try to odin with bootloarders on/or off if it fails turn it to the opposite (so if you turned it on an failed turn it off)
Sent from my SGH-T839 using xda app-developers app

Well, after trying multiple things, none of which worked, I finally found success with the Heimdall one click total wipe. she lives again.