Database Info

How fix PRI. READ IF YOU HAVE FLASHED ANY DEV ROM

Ok so as most of the users on this website have learned, alot of people who have flashed DC2.0 are having PRI issues.
Following PRI's that are not effected by this problem are
1.70_003
1.68_003
2.10_003
This problem was first noticed on Damageless's DamageControl2.0. The reason it was noticed is because this is an official sprint rom that includes all the Sprint applications. As most people have noticed that a month or so ago people couldn't use sprint tv with alot of roms because of the "You must be a sprint user" error. The cause of this issue is believed to be the ERIS leak a few weeks back. If you have flashed ANY rom that was based off this leak you probably have a bad PRI.This includes but not confined to, ANY DAMAGE CONTROL ROM, ANY FLIPZ ROM AFTER 2.0b, AND ANY ROM THAT IS BASED ON ERIS This must fixed by retrieving you MSL and doing the instructions i will add to the end of this post. If you do not correct the PRI then when official leaks are released you will get many errors.
Now that i have explained all this please do not point fingers at anyone because this problem was completely unknown by anyone and everyone.
Here is how to fix the problem
YOU ARE RESPONSIBLE FOR RETRIEVING YOUR MSL THROUGH LEGAL MEANS WHICH MEANS CALLING SPRINT AND ASKING FOR IT.
After you have your MSL follow these instructions http://forum.xda-developers.com/showpost.php?p=6006539&postcount=1405
and then you should have a correct Sprint PRI.
PLEASE DOWNLOAD FRESH 1.1 AND DO EVERYTHING STATED HERE IN THAT ROM. I CANT STRESS THIS ENOUGH BECAUSE PEOPLE ARE HAVING PROBLEMS ON 2.1 BUILDS
Let me emphasize that in doing testing with this problem RUU was NOT successful in returning the PRI. The only solution that has worked 100% is the ##786#, Enter your MSL, and re-provisioning your phone. Please try to find other solutions and discuss the outcomes in this thread.
Here are specific simple walkthrough. DO THIS IN A 1.5 ROM
1.Call Sprint and get your MSL. Keep calling and asking if it doesnt work the first time. Or go online and switch to another phone.
2. After you get the MSL go into a 1.5 ROM and bring up the dialer and press "##786# CALL"
3. It will initialize and the Reverse Logistics Support menu will come up with information.
4. After it has loaded press menu hardkey and then push reset.
5. Enter your MSL as password.
6. Your phone will reset and go into recovery. just push reboot system
7. Continue waiting an it will reboot again
8. After the last reboot all of your info including your PRI will be back to normal.
9. now update PRL and PROFILE to ensure success.
10. after all that you can nandroid any rom thats not eris based. I suggest darchlegend, Flipz 2.0, or DC2.0
IF YOU GO INTO OPTIONS AND SEE SPRINT AS YOUR CARRIER AND YOUR LOCKSCREEN HAS SPRINT THEN YOU HAVE FIXED THE ISSUE.
Special thanks goes to MrTip for finding the fix
Damageless for releasing the rom to find this problem.
Below for Developers________________________________________
After extensive testing i found the roms based on the Eris build will change the PRI. I am not 100% why but they do. It has to be something in the update-script to mess with the /radio partition. Anyone who can give further insight to this please PM me.

Continuing from last thread..
MrDanger said:
My PRI is 1.84_013...good or bad??
AND google doesnt work :/
Click to expand...
Click to collapse
Thats odd...
MrDanger said:
It says Cellular South... Im now reflashing.
Click to expand...
Click to collapse
Dumb question....is that who you go through? Or is it just throwing that out at you?

MrTrip said:
Continuing from last thread..
Thats odd...
Dumb question....is that who you go through? Or is it just throwing that out at you?
Click to expand...
Click to collapse
Yes, that's who I have. I was glad to see the "Cellular South". Just want my google back :/

MrDanger said:
Lol, yes.. that's who I have. That's actually the good part.. just no google.
Click to expand...
Click to collapse
Are you back on 2.0r2?

MrDanger said:
Yes, that's who I have. I was glad to see the "Cellular South". Just want my google back :/
Click to expand...
Click to collapse
thats your carrier?

MrTrip said:
Are you back on 2.0r2?
Click to expand...
Click to collapse
Booting back into DC 2.0r2 now

Avalaunchmods said:
thats your carrier?
Click to expand...
Click to collapse
Yeah that is his carrier. I'm sure they have a different PRI than Sprint, however not having google is the big problem right now...
MrDanger said:
Booting back into DC 2.0r2 now
Click to expand...
Click to collapse
Let us know if you get google back after this. Somebody asked if we could go back to 1.5...maybe we can't now?

Avalaunchmods said:
thats your carrier?
Click to expand...
Click to collapse
Yep.
10chars

Get MSL Fast and Easy.
Just FYI I followed this method and was able to successfully get my MSL.
http://forum.xda-developers.com/showthread.php?p=5928695
Its real easy and worked like a champ and best of all you don't have to wait til morning to ask customer service.
Just finished rebooting and sprint is back
I would assume Avalaunchmods this is legal. Remove if it is not

eme82 said:
Just FYI I followed this method and was able to successfully get my MSL.
http://forum.xda-developers.com/showthread.php?p=5928695
Its real easy and worked like a champ and best of all you don't have to wait til morning to ask customer service.
Just finished rebooting and sprint is back
I would assume Avalaunchmods this is legal. Remove if it is not
Click to expand...
Click to collapse
ehh cdma workshop is frowned upon. ill have to look into it more. this thread will be locked and stickied by a mod so i will def. check more into it. but everyone im out for the night it is 4 oclock here. it has been fun with all this lol hope the solution works and i hope this problem will shed light on problems we have all been having.

So, any google love?

MrTrip said:
So, any google love?
Click to expand...
Click to collapse
When I reseted it... It reseted my MSN & MSID... :/ Got to find it again.

MrDanger said:
When I reseted it... It reseted my MSN & MSID... :/ Got to find it again.
Click to expand...
Click to collapse
Ouch. We may want to note that in the DC 2.0r2 thread...

eme82 said:
Just FYI I followed this method and was able to successfully get my MSL.
http://forum.xda-developers.com/showthread.php?p=5928695
Its real easy and worked like a champ and best of all you don't have to wait til morning to ask customer service.
Just finished rebooting and sprint is back
I would assume Avalaunchmods this is legal. Remove if it is not
Click to expand...
Click to collapse
When I dial ##3424# and hit call I get a message that the number or code I dialed is invalid and to try again. Am I missing something

This worked great for me! I did the MSL reset right over the 2.0 Damage rom, however, when I rebooted it would not do the Handset update. I had to wipe and re-install the ROM. Everything working now.
Nice find guys, and Damage if you are watching this thread....nice work

Avalaunchmods said:
Ok so as most of the users on this website have learned, alot of people who have flashed DC2.0 are having PRI issues.
Following PRI's that are not effected by this problem are
1.70_003
1.68_003
2.10_003
This problem was first noticed on Damageless's DamageControl2.0. The reason it was noticed is because this is an official sprint rom that includes all the Sprint applications. As most people have noticed that a month or so ago people couldn't use sprint tv with alot of roms because of the "You must be a sprint user" error. The cause of this issue is believed to be the ERIS leak a few weeks back. If you have flashed ANY rom that was based off this leak you probably have a bad PRI.This includes but not confined to, ANY DAMAGE CONTROL ROM, ANY FLIPZ ROM AFTER 2.0b, AND ANY ROM THAT IS BASED ON ERIS This must fixed by retrieving you MSL and doing the instructions i will add to the end of this post. If you do not correct the PRI then when official leaks are released you will get many errors.
Now that i have explained all this please do not point fingers at anyone because this problem was completely unknown by anyone and everyone.
Here is how to fix the problem
YOU ARE RESPONSIBLE FOR RETRIEVING YOUR MSL THROUGH LEGAL MEANS WHICH MEANS CALLING SPRINT AND ASKING FOR IT.
After you have your MSL follow these instructions http://forum.xda-developers.com/showpost.php?p=6006539&postcount=1405
and then you should have a correct Sprint PRI. If the code does not work you may have to flash back to fresh 1.1 or a 1.5 rom for it to work.
Special thanks goes to MrTip for finding the fix
Damageless for releasing the rom to find this problem.
Click to expand...
Click to collapse
mmm... im a little confused with the instructions provided on the linked post... can you plz clarify... i understand how to obtain my msl, but were do i go from there? the post just says to enter that one code and then the msl but i dont get any option to enter a msl #.
So far this is what i think im supposed to do,
do i need to (##enter code#)press menu -> reset, and then enter the msl as the password?
just want to be completetly clear before i go ahead and mess with it, thanks

I just Created this Software so even though you Dialer dont Support ## Code you can Trigger is via PC
Just place adb.exe and Depdencies on C:\Winodws and use this Software it is made on MS.net

lalo45 said:
mmm... im a little confused with the instructions provided on the linked post... can you plz clarify... i understand how to obtain my msl, but were do i go from there? the post just says to enter that one code and then the msl but i dont get any option to enter a msl #.
So far this is what i think im supposed to do,
do i need to (##enter code#)press menu -> reset, and then enter the msl as the password?
just want to be completetly clear before i go ahead and mess with it, thanks
Click to expand...
Click to collapse
Yeah instructions are unclear I get the same thing, but it wont even let me put in my MSL as a password its too long...

Well PRI is just a Number Showing Exact Programming Protocol
i think Sprint TV dont work Becuase of Improper RTSP Proxy IP and Port
use this Dialer code or use mobile5dm.exe and Trigger that Screen
##3282# - SPC - Advanced
RTSP (Real time Streaming Protocol) and See what u can see in
RTSP Proxy Port
RTSP Proxy Address

Is there a password? I'm confused I didn't need to use my MSL infact when I used the code to access it, it showed my MSL number in the list... I hit ok with out putting a password in and nothing. I tried using my MSL number as the password nothing. Is there some step I'm missing?

Froyo roms 3G fix for T-Mobile (untested)

Try pushing the files in the zip in /system.
http://www.mediafire.com/?lh7gy509ce6zcjf
(For Froyo Roms, not Eclair)
Untested (I'm not on T-Mobile)

I haven't been able to find it but there is an app on this forum somewhere called ItfunzBasebandSwitcher.apk that fixes 3G for Froyo. It's tested, it works and it's much simpler then the other fixes.
Edit: Here it is.... http://forum.xda-developers.com/attachment.php?attachmentid=490361&d=1295114350

adlxdum said:
Try pushing the files in the zip in /system.
http://www.mediafire.com/?lh7gy509ce6zcjf
(For Froyo Roms, not Eclair)
Untested (I'm not on T-Mobile)
Click to expand...
Click to collapse
the previous 3g fix for eclair is the same for Froyo... im on tmo and works

JamesDax said:
I haven't been able to find it but there is an app on this forum somewhere called ItfunzBasebandSwitcher.apk that fixes 3G for Froyo. It's tested, it works and it's much simpler then the other fixes.
Edit: Here it is.... http://forum.xda-developers.com/attachment.php?attachmentid=490361&d=1295114350
Click to expand...
Click to collapse
DOes that actually work? Also, it's in chinese, so which one do I select.
Also, I can't get ADB to work right now, so is tehre another way i can get 3G to work? Root explorer perhaps?

isikh said:
DOes that actually work? Also, it's in chinese, so which one do I select.
Also, I can't get ADB to work right now, so is tehre another way i can get 3G to work? Root explorer perhaps?
Click to expand...
Click to collapse
Left button for China, middle one for USA and right one for Europe. Then reboot.
Works for me (Europe).

shamo42 said:
Left button for China, middle one for USA and right one for Europe. Then reboot.
Works for me (Europe).
Click to expand...
Click to collapse
Thanks so much! I'm going to give it a go! All I have is EDGE right now, but I'm also in an area, my dorm/campus which has bad 3G/Data connection for T-Mobile USA. This is why I need WiFi calling working on this ROM. Could someone please tell me how I can get it working? I need a ROM that WiFi calling is working on; this is extremely important for me. Thanks in advance!

adlx, I tried the app and its not working for me.
I have the Higgsy Modded 2.2 ROM - Minimal Moto/Chinese, maybe that's why. Do you think it worth it to try your method or is it the exact same?
thanks in advance (Im getting adb right now, but asking in case its pointless)

It didnt work.
I'm from argentina, we have AT&T bands.
Originally my phone came loaded with:
System version: Blur_Version6.14.7.MB525.Personal.en.AR
Firmware version: 2.1-update1
Number version: JORLA_U3_6.14.7
I have a clockwork recovery backup from that. Will it do me any good? I have 2.2 chinese now.
I tried itfunz, your method and #*#*4636#*#*. Nothing worked the last option said seting USA network did not work.
please help?

Hi adlx, HEROEdelREVES is trying to help (also from argentina). He sent me his nandroid backup (I deleted mine while flashing :s).
I tried copying over the files in your fix with the original files from the bp_nvm_default folder for the latam version. Still, it does not work. Any ideas?

It looks like mine fix
http://forum.xda-developers.com/showthread.php?p=10928846#post10928846
Peerhaps you use same radio file from eclair version ?

JamesDax said:
I haven't been able to find it but there is an app on this forum somewhere called ItfunzBasebandSwitcher.apk that fixes 3G for Froyo. It's tested, it works and it's much simpler then the other fixes.
Edit: Here it is.... http://forum.xda-developers.com/attachment.php?attachmentid=490361&d=1295114350
Click to expand...
Click to collapse
shamo42 said:
Left button for China, middle one for USA and right one for Europe. Then reboot.
Works for me (Europe).
Click to expand...
Click to collapse
Can confirm that this app with middle button & reboot restores 3G for Froyo roms on my T-Mobile US Defy.
Unfortunately it breaks Tethering, so you get "No valid tethering APN" when you try to enable it. Not sure if there is any fix for this with any of the 3G fixes for T-mo USA. But I'd rather have 3G than tethering and no 3G.

[Solved] Flash EVO back to Sprint from Cricket/MetroPCS!

My roommate bought an EVO 4G off Craigslist that was pre-flashed to MetroPCS. It had a clean ESN, so I tried to have it activated. I finally got voice and text to work, but no data. After searching the web, visiting flashing stores, and spending hours on the phone with Sprint's so called "Technical Support" over the last week, I finally figured it out...
This is my first tutorial, so bare with me. And I apologize if this is in the wrong forum, it seemed most appropriate. I performed all this in Windows 7 x64.
First you need some software-
1. QPST - http://www.mediafire.com/?m4s81a4zsdbmhen
2. HTC Diag phone drivers - http://www.mediafire.com/?631456zwxi09hh2
3. PRL File 60650 - http://www.corolada.com/prl/
4. I'm not sure if you need ADB installed, but I already did.
5. You will also need to know your MSL. It will most likely be 000000 if your phone is coming from Cricket or MetroPCS.
Now that we have those, we can get to work.
6. Connect your phone via USB and type in ##3424#, your phone should now be in Diag mode. Make sure USB Debugging is ENABLED!
7. Open your device manager in Windows and right click the unknown device "HTC DIAG", Select Update driver.
8. Select Browse my computer for driver. Click select device from list, Click next, Then click "Have Disk" and point to the appropriate HTC Diag driver folder you downloaded.
9. You now should have HTC Modem installed correctly. Right click on it and go to Properties, Then click on the modem tab. Find your port number eg. COM1, COM2, etc.
10. Open up QPST Configuration, Click the PORTS tab. On the bottom right click add port. Add the port you just found from the step above, and hit Enable.
11. Go back to the active phones tab, double click your phone.
12. On the bottom click read from phone. Then save it for a backup.
13. Click on Roaming tab. Find the PRL box, click browse and add your 60650 PRL file you downloaded.
14. Go back to the CDMA tab. Under phone number click the Class 1 box. Enter your phone number (xxx-xxx-xxxx) minus dashes in the box next to Class 1.
15. Click write to phone. Hard parts over!
16. Once that finishes, unplug and reboot your phone.
17. Go to Settings>Update Software>Update PRL then reboot again.
17. Once its back up go into your dialer. Punch in ##3282#. Hit Edit Mode. The password is your MSL.
18. Once in goto Data Profile. Hit Menu then hit RESET.
19. Your phone should now reboot and be able to activate on Sprints network!
I already did this for my roommate, so I am writing this out of memory. I wanted to post pictures but I would have to take CM7 off my phone and redo all of it... grrrr.
Again, this is my first guide so i might have missed something. But I hope not. So many people have helped me here on XDA, so this is my contribution to the community. I hope this helps some people.

I did this to a hero. I believe I just cleared all the ##data stuff and pep update manually.
Sent from my PC36100 using Tapatalk

I tried that to. But the only way to make it work was to flash the new PRL file. Neither Sprint or a Cricket flashing place could fix it. Which I thought was pretty stupid.

Another quick way of doing it.
Load Stock RUU.
This will rewrite PRL, NV items etc back as it rewrites the radio wich controls these.
Once done ##RTN# need MSL to use this, but this will help as well. and your done.

This is handy to have, and even better to have a few different ways to do it.

amoamare said:
Another quick way of doing it.
Load Stock RUU.
This will rewrite PRL, NV items etc back as it rewrites the radio wich controls these.
Once done ##RTN# need MSL to use this, but this will help as well. and your done.
Click to expand...
Click to collapse
Beat me to it.................. This will definitely work.

amoamare said:
Another quick way of doing it.
Load Stock RUU.
This will rewrite PRL, NV items etc back as it rewrites the radio wich controls these.
Once done ##RTN# need MSL to use this, but this will help as well. and your done.
Click to expand...
Click to collapse
thanks to all. this worked for me.

followed the guide, however data and market place is not working
calls and text work fine, any ideas ? thanks

amoamare said:
Another quick way of doing it.
Load Stock RUU.
This will rewrite PRL, NV items etc back as it rewrites the radio wich controls these.
Once done ##RTN# need MSL to use this, but this will help as well. and your done.
Click to expand...
Click to collapse
I tried this like 4 times, and it would never flash the PRL... the way I did it, it finally flashed sprints PRL.
brax said:
followed the guide, however data and market place is not working
calls and text work fine, any ideas ? thanks
Click to expand...
Click to collapse
Go into your phone settings, goto About Phone, what is the PRL number listed?

i am pretty sure i flashed the "60650.prl"
however i sold the phone and it will be back here tomorrow for repairs....
i had the guy do the settings -> update prl without luck....
sigh thanks for any help!

brax said:
i am pretty sure i flashed the "60650.prl"
however i sold the phone and it will be back here tomorrow for repairs....
i had the guy do the settings -> update prl without luck....
sigh thanks for any help!
Click to expand...
Click to collapse
Well if for some reason it didn't flash, then "update PRL" wont work cause its not looking for sprints PRL. Try to see what PRL is loaded on the phone, then I can probably help a little better.

guy claims under settings the prl says 1.77-003
thanks

brax said:
guy claims under settings the prl says 1.77-003
thanks
Click to expand...
Click to collapse
That's the PRI, not PRL. The PRL will be a five digit number. The latest Sprint PRL is 60675.

yeah thats what i figured, didnt know if that was a hex abbreviation with sprint's software for the prl or what... waiting for him to text me back...
i am pretty sure when i waited for him to activate the phone it showed a 3g icon when voice and text went active.. you sure if the prl is wrong everything else would work except data/mms/marketplace? thanks
the prl is = 60675

brax said:
yeah thats what i figured, didnt know if that was a hex abbreviation with sprint's software for the prl or what... waiting for him to text me back...
i am pretty sure when i waited for him to activate the phone it showed a 3g icon when voice and text went active.. you sure if the prl is wrong everything else would work except data/mms/marketplace? thanks
the prl is = 60675
Click to expand...
Click to collapse
Well you have a Sprint PRL. Did the phone go through the Hands Free Activation when you tried to activate it? If you see a 3G symbol then all should be good. You could have him call Sprint and tell them data isn't working and you need to re-activate it...

well we had to type in a diag code then hit update and then it activated, not OTA to get talk and text going... he said he spent a hour at the sprint store today and they couldnt solve it

You could try my guide again, from step 17.

i asked the guy via text to do the guide through 17 to end, he says they tried that at the sprint store... without luck... i guess i can try it tomorrow when the phones in my hands unless anyone else has any other ideas....

what i did was followed this guide after flashing a oem RUU back to the phone
"RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459"

Did you get your phone working? Could you share some of your tricks? Thanks!
brax said:
what i did was followed this guide after flashing a oem RUU back to the phone
"RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459"
Click to expand...
Click to collapse

Captivate Official 2.3.3 Rogers

So Rogers released gingerbread for our captivates yesterday! Anyone have an official changelog? Also Im a bit disappointed that they didn't include the crt lock animation

BlackSideburns said:
So Rogers released gingerbread for our captivates yesterday! Anyone have an official changelog? Also Im a bit disappointed that they didn't include the crt lock animation
Click to expand...
Click to collapse
I believe you can modify the Framework.res to enable crt animation but to do that you need to root access, which I'm trying to figure out to root the 2.3.3, I already tried SuperOneClick but it fails at steps #6.

Yay rogers release!
Cant wait for someone to make it odin flashable. I'd try to go through Kies but the last time I did, I tried to go from 2.1 and 2.2 and Kies wasnt letting me do it.

jonnyg1097 said:
Yay rogers release!
Cant wait for someone to make it odin flashable. I'd try to go through Kies but the last time I did, I tried to go from 2.1 and 2.2 and Kies wasnt letting me do it.
Click to expand...
Click to collapse
What do you mean "Kies wansn't letting me do it"?

Nick0703 said:
What do you mean "Kies wansn't letting me do it"?
Click to expand...
Click to collapse
When I was on stock 2.1 before and pluged in my phone to connect to Kies it wasnt letting me upgrade to 2.2 for whatever reason (I cant remember anymore what it was saying).

jonnyg1097 said:
When I was on stock 2.1 before and pluged in my phone to connect to Kies it wasnt letting me upgrade to 2.2 for whatever reason (I cant remember anymore what it was saying).
Click to expand...
Click to collapse
But now it's working right?

Nick0703 said:
But now it's working right?
Click to expand...
Click to collapse
Doesnt look like it. Kies finds my phone but it doesnt give me the option to upgrade.

jonnyg1097 said:
Doesnt look like it. Kies finds my phone but it doesnt give me the option to upgrade.
Click to expand...
Click to collapse
PM me, I'll try to help you out.

is it worth it to upgrade? like does it run fast? I'm on Miui right now, but i want offical rogers 2.3.3 bootloaders

jonnyg1097 said:
When I was on stock 2.1 before and pluged in my phone to connect to Kies it wasnt letting me upgrade to 2.2 for whatever reason (I cant remember anymore what it was saying).
Click to expand...
Click to collapse
I had this problem as well when i tried Kies. Make sure you have your original nvdata.bin, so your phone can't be unlocked. Also make sure your phone shows a CSC, to do that, go to dialer and input *#1234# the CSC should end with RWC or have RWC in it i can't recall which. If not there is a stock JL1 you have to flash to add CSC.
the instructions to correct CSC is in this post:
http://forum.xda-developers.com/showpost.php?p=17461697&postcount=6
Once that's cleared up your good to go.
My apologies if Nick0703 already helped you but just in case other people have the same problem they can read about the fix here.

Updating your Product Code and fixing the Unknow CSC Version.
miller420 said:
I had this problem as well when i tried Kies. Make sure you have your original nvdata.bin, so your phone can't be unlocked. Also make sure your phone shows a CSC, to do that, go to dialer and input *#1234# the CSC should end with RWC or have RWC in it i can't recall which. If not there is a stock JL1 you have to flash to add CSC.
the instructions to correct CSC is in this post:
http://forum.xda-developers.com/showpost.php?p=17461697&postcount=6
Once that's cleared up your good to go.
My apologies if Nick0703 already helped you but just in case other people have the same problem they can read about the fix here.
Click to expand...
Click to collapse
Oh I forgot that I posted that before . One more thing that I found out is that for people that used other customs roms before your product code might have change from "RWC" to "ATT". Yeah so here are the instructions....
This is to fix the Unknow CSC
Read this post: Click Here. It will tell you how to fix the Unknow CSC Version which prevents Kies from updating your phone.
One more thing that I found out is that for people that used other customs roms before your product code might have change from "RWC" to "ATT".
This is to Update your Product Code if it changed from RWC to something else.
Only Do This Step, If Product Code Did Change From RWC. To Check The Product Code Of Your Phone, Enter *2767*4387264636# In Your Dialer.
Then There Will Be A Line That Says:
[2] PCode:"SGH-I896ZKARWC”
If It Doesn't Say That Then Proceed
1. To change that you have to extract your EFS Folder with this http://www.mediafire.com/?e2odxo0rqe9bpbb and
2. Extract the files to a new Folder called "NV_data" in desktop "C:\Users\User\Desktop\NV_data\" Then run "retrieve efs.bat" (make sure to allow Superuser permissions in your phone), it's going to create a folder call "efs_bkup" and extract your efs files.
3. Then to change the product code use this HEX EDITOR http://www.mediafire.com/?5snh9f48ripskk5, execute it and open your nv_data.bin located in C:\Users\User\Desktop\NV_data\efs_bkup\efs.
4. Once it's open use the Find in Hex Editor and search for "SGH" you will find this "SGH-I896ZKARWC" (!!MY VERSION!!).
5. Your normal product code should end with "RWC", if you see something else than "RWC" change it "RWC".
6. Then save and exit.
7. Go back to the main folder where you extracted the files and run "update nv_data.bat" lets it do its things (once again allow Superuser permission in your phone) then your phone is going to reboot and you should be good to go.
8. Now Kies recognize and should allow you do to updates etc...
NOW INCLUDES PICTURE STEPS ON HOW TO CHANGE PRODUCT CODE IN THE "ESF Extractor.zip".
---------- Post added at 06:19 PM ---------- Previous post was at 06:03 PM ----------
dohboy15 said:
Is it worth it to upgrade? Like does it run fast? I'm on Miui right now, but I want Offical Rogers 2.3.3 Bootloaders
Click to expand...
Click to collapse
Well for me it's awesome. It boot up fast, got good gps reception and lock time. .

Nick0703 said:
Oh I forgot that I posted that before . One more thing that I found out is that for people that used other customs roms before your product code might have change from "RWC" to "ATT".
1. To change that you have to extract your EFS Folder with this http://www.mediafire.com/?e2odxo0rqe9bpbb and
2. Extract the files to a new Folder called "NV_data" in desktop "C:\Users\User\Desktop\NV_data\" Then run "retrieve efs.bat" (make sure to allow Superuser permissions in your phone), it's going to create a folder call "efs_bkup" and extract your efs files.
3. Then to change the product code use this HEX EDITOR http://www.mediafire.com/?5snh9f48ripskk5, execute it and open your nv_data.bin located in C:\Users\User\Desktop\NV_data\efs_bkup\efs.
4. Once it's open use the Find in Hex Editor and search for "SGH" you will find this "SGH-I896ZKARWC" (!!MY VERSION!!).
5. Your normal product code should end with "RWC", if you see something else than "RWC" change it "RWC".
6. Then save and exit.
7. Go back to the main folder where you extracted the files and run "update nv_data.bat" lets it do its things (once again allow Superuser permission in your phone) then your phone is going to reboot and you should be good to go.
8. Now Kies recognize and should allow you do to updates etc...
---------- Post added at 06:19 PM ---------- Previous post was at 06:03 PM ----------
Well for me it's awesome. It boot up fast, got good gps reception and lock time. And the amount ram is 329 mb, 10 mb less than MIUI.
Click to expand...
Click to collapse
Thats awesome! It seems Rogers does a lot better with updates then AT&T does lol the only thing stopping me so far is I'll lose all my apps and not be able to restore them due to titanium backup needing root and from what I've read, there is no root yet

dohboy15 said:
Thats awesome! It seems Rogers does a lot better with updates then AT&T does lol the only thing stopping me so far is I'll lose all my apps and not be able to restore them due to titanium backup needing root and from what I've read, there is no root yet
Click to expand...
Click to collapse
If you don't want to lose your apps, stays with your current roms until we figure out how to root 2.3.3

I was checking the Samsung site today to see if maybe they released the sources for KH2 to compile the kernel for Fuguroot, but no go so far. I'm not sure how long it takes them to release their sources, but its something to keep a look out for.

Been waiting for this thanks

Tried to install Kies and Run. Did not find the phone so it couldn't update.
On completely stock 2.1 I897
Question, If i download 2.3.4 from
http://forum.xda-developers.com/showthread.php?t=1233620
Do i need to do anything specifically to install this ROM? or can i do it like the other phones copy to Root SD folder and run from there?
Thanks

I did the 2.3.3 update through Kies but I am having a problem. When I connected to my Wifi router for the first time, I got a "TWLauncher has closed unexpectedly" error. While I can restart the phone and connect to Wifi, I still get the error randomly. Never had a problem with 2.2. I did a reset through the settings menu and pulled out the battery but it still seems to happen.

FloppyDrive said:
I did the 2.3.3 update through Kies but I am having a problem. When I connected to my Wifi router for the first time, I got a "TWLauncher has closed unexpectedly" error. While I can restart the phone and connect to Wifi, I still get the error randomly. Never had a problem with 2.2. I did a reset through the settings menu and pulled out the battery but it still seems to happen.
Click to expand...
Click to collapse
Try doing a hard reset by dialing *2767*3855#.

I tried Kies 1.5, Kies 2.0.2 and Kies Mini. No matter what I cannot get the phone to be recognized. I'm on a Vista machine. I was lucky enough to be on a Windows 7 machine last time I was upgrading from 2.1 to 2.2 and it worked with Kies. With my Vista machine I had trouble back then too doing the upgrade to 2.1 to 2.2.
Any ideas what I can try this time around ?

Dock apps
Well anyways, updated and all worked well. Except for the fact they fubar'd the desk home dock app. Now if i plug my phone it it tells me to select a usb mode (and desk home isnt installed).
Can anybody post the rogers 2.2 desk home app? Couldnt find one on google that doesnt freeze...

No logo stick Gingerbread 3G & wifi

Hi this is Gingerbread with a big thank to mohicanrat for initial release
This download does not have the radio see other posts.
In this rom you will have the full GB rom and after instaling the radio youll have wifi and 3G.
not the radio so no imei i trust you have already installed mohicanrat realease and know how to
tutorial for installing radio
http://www.lg-phones.org/how-to-fix-a-bricked-lg-optimus-3d.html
radio file thanks to mohicanrat his radio link was
http://www.zshare.net/download/95544922e3771b7f/
sorry but theres no easy way to flash there is google to flash fls files. Learn and be proud.
Although if someone could relese or edit the .fls file so it could be added to a CWM file and flashed.
Was looking into .fls code and it looks alot like C ive im a bit rusty with it but if someone is willing to help it could be edited...........
Stock rom no stuck at the LG Logo. Will be same as official release from LG except its rooted.
just factory reset in cwm or may loop
Stock rom for those who are stuck at the LG Logo . This is what you been waiting on
http://www.multiupload.com/6V6TY2JY8G
if your happy with this hit the thanks button
Heres my personal rom with some of the bloat ware removed. Added digital battery readout, some script
missing guilivers travels, emergency phone connection, ebuddy
increased free ram to 2oomb
http://www.multiupload.com/DXPWL475Q0
will do a custom rom with fixed boot if theres any interest

Great thx, downloading now. i've a 50mbit up/down line, so if i have it, everyone has it
So i've to put this zip on my sd and do zip update in cwm?
thx

yeah contains all mod files for cwm
sweet could you upload to multi im stuck with 56kbps upload

Man the unique thing dont work is the radio?
Can make/receive calls and send/receive sms/mms?

i can upload to multi upload... but never did that before... i always use my own webserver

Since you can make calls this will give you 100% functionality
WIFI and Bluetooth

What about 3G?

scottydoguk said:
Since you can make calls this will give you 100% functionality
WIFI and Bluetooth
Click to expand...
Click to collapse
Sorry but i didn't understand... this update can fix the problem with signal?
Can i make call? and sms with this fix of system?

LP84 said:
Sorry but i didn't understand... this update can fix the problem with signal?
Can i make call? and sms with this fix of system?
Click to expand...
Click to collapse
This is the complete rom without baseband. You wiil have to flash the radio using the quickflash file .fls
If you have done so and can make calls install this for wifi bluetooth and so.
or to try the rom and have access to the market through wifi

scottydoguk said:
This is the complete rom without baseband. You wiil have to flash the radio using the quickflash file .fls
If you have done so and can make calls install this for wifi bluetooth and so.
or to try the rom and have access to the market through wifi
Click to expand...
Click to collapse
But the wifi work with the old version, just set manually the IPs.. and it's ok!

LP84 said:
But the wifi work with the old version, just set manually the IPs.. and it's ok!
Click to expand...
Click to collapse
now you dont have to set ip manually
added missing files etc try it you youll see the difference

And,what about 3G? Work or not work?

scottydoguk said:
now you dont have to set ip manually
added missing files etc try it you youll see the difference
Click to expand...
Click to collapse
Anyway it's a good thing...! Thanks scotty :=

dr_jerremy said:
And,what about 3G? Work or not work?
Click to expand...
Click to collapse
im hoping so but will be on a try and see

@scottydoguk, I posted a question on page 3 of the working gb with radio thread, and then on the last page below your last post there, (this is a copy paste with a minor edit so please be gentle if you see this more than once >.<) but did you manage to get mobile network working? as I just flashed the baseband to my phone, and can make/receive calls, but I dont have 3G or wifi working atm (about to try your file after its downloaded). Do you have the apn's handy for orange? incase its now incorrect or are they included in your file?.
EDIT: Also so long as your phone is unlocked and unbranded (and purchased in the uk) the baseband available should also work for you.

madshaun1984 said:
@scottydoguk, I posted a question on page 3 of the working gb with radio thread, and then on the last page below your last post there, (this is a copy paste with a minor edit so please be gentle if you see this more than once >.<) but did you manage to get mobile network working? as I just flashed the baseband to my phone, and can make/receive calls, but I dont have 3G or wifi working atm (wifi should be fixable by assigning an IP address manually). Do you have the apn's handy for orange? incase its now incorrect and any idea whats up with the wifi? (im relatively new to android, so am not sure where to start lol).
EDIT: Also so long as your phone is unlocked and unbranded (and purchased in the uk) the baseband available should also work for you.
Click to expand...
Click to collapse
This will fix your WIFI
did you use the resistor method to install the baseband

Which files did you replace?

Nope, just the normal cable supplied with my phone. That's why I asked (as I figured something was overlooked) lol

PlanetRaptoR said:
Which files did you replace?
Click to expand...
Click to collapse
there was 70meg missing from original upload

scottydoguk said:
there was 70meg missing from original upload
Click to expand...
Click to collapse
Ah, OK. Where did you get the stuff that was missing from the original upload?