CF-Root for most I9003 firmwares.
- All the credit to Skin for his cf-root and his great help in resolving issues.
- UtterChaos Kernel Credit goes to DoomLord and Napster.
- Cwm 5.0.2.8 (Credit Amit Bagaria)
XWLF2, DDLF2 and XXLE4 will require clean Firmware Flash for the CF-root to work.
If You are already using any other CF-root, these CF-roots won't probably work.
Flash the Firmware again and then flash the CF-root.
Here are the links.
DDMF1-CFROOT-27-06-2013.tar Direct link (credit: LoLaTiOn)
BGMD1-CFROOT-08-06-2013.tar
JPKPH-CFROOT-26-03-2013.tar Mirror
ZCKPL-CFROOT-13-03-2013.tar Mirror
XWLJ2-CFROOT-15-02-2013.tar
POLJ1-CFROOT-08-11-2012.tar Mirror
XWLF3-CFROOT-12-07-2012.tar Mirror
XWLF2_CFROOT-05-07-2012.tar Mirror
DDLF2_CFROOT-05-07-2012.tar Mirror
XXLE4_CFROOT-05-07-2012.tar Mirror
ZHKPE-CFROOT-25-05-2012.tar Mirror
JXKP3-CFROOT-25-05-2012.tar Mirror
XXKPU-CFROOT-29-02-2012.tar Mirror
DDKP3-CFROOT-12-02-2012.tar Mirror
DDKP2-CFROOT-23-12-2011.tar
DDKP1-CFROOT-23-12-2011.tar
XXKPQ-CFROOT-UCK-16-12-2011.tar Mirror
With UC Kernel V6.
CFROOT-XXKPQ-17-11-2011.tar Mirror
Module: tun.ko for XXKPQ.
CF-ROOT-XIKP2-16-11-2011.tar Mirror
CF-ROOT-ZHKPD-11-11-2011.tar
Module: tun.ko for ZHKPD.
CF-ROOT-XXKPN-09-11-2011.tar
Module: tun.ko for XXKPN.
CF-ROOT-XWKPG-08-11-2011.tar Mirror
CF-ROOT-DXKP9-10-11-2011.tar Mirror
Module: tun.ko for DXKP9.
CF-ROOT-ZCKP9-12-11-2011.tar
Flash it with ODIN as PDA.
How To Flash Gingerbread XXKPE 2.3.4 Firmware On Samsung Galaxy SL I9003.
Click to expand...
Click to collapse
Installing a new rom - This is the way I do it.
I really don't know about other's. But when I am moving to a new rom, I always follow these steps and have never had issues.
Read the concerned ROM post and if you dont understand ask for installation procedures.
Take backup of all the apps to external sd card. I prefer titanium backup.
Powerdown phone and Remove the external sd card.
Do a factory reset and reboot.
Start ODIN and fill in the required tabs as per requirement.
Go to Download mode on the phone and connect the phone to pc and ensure that ID:COM shows Yellow.
Flash the firmware and wait until the phone reboots and the odin shows green color.Now you can remove the usb cable.
Once rebooted, do a factory reset again.
From recovery clear Cache and reboot.
Once all the above are done and you have ensured that the phone is functioning normally, go for the mods.
Click to expand...
Click to collapse
How to convert to Ext4
First make a Nandroid Backup via CWM.
Download the Ext4 convertor script here.
Copy it to the root of the External Sd Card of the Phone.
Go to Recovery.
Flash the Ext4 Script. (Pl. Do not reboot the phone after this)
Restore the Nandroid backup immediately.
Reboot and enjoy Ext4.
Click to expand...
Click to collapse
How to Un-Root
Download and flash this from recovery. UnRoot.zip
Click to expand...
Click to collapse
How to port cf-root for all GB firmware (I9003): LINK
Click to expand...
Click to collapse
Enjoy
Disclaimer : I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE AND DO AT YOUR OWN RISK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ganesh u really created by ur own...??? Just salute u dude...superb buddy. Do u have kernal coding knowledge???
I have tested it at my end. Others need to test it too.
vishal24387 said:
ganesh u really created by ur own...??? Just salute u dude...superb buddy. Do u have kernal coding language???
Click to expand...
Click to collapse
I use linux at home. So could do it.
I know C/C++ but is not required in this case.
then ganesh why dont u contact to codeworkx??? He need c, c++ language programmers...
vishal24387 said:
then ganesh why dont u contact to codeworkx??? He need c, c++ language programmers...
Click to expand...
Click to collapse
Already got the Dropbox link from him.
I will need to look into it and see if it is within me to do the cm7 thing.
great ganesh
Sent from my GT-I9003 using xda premium
Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!
thanks for DXKP9 cf-root, amazing work!
will try this
gagan007 said:
Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!
Click to expand...
Click to collapse
I created the backup from 2 times. It worked both the times and restored it.
Are you able to access the sdcard from filemanager.
gagan007 said:
Installed it, all looked fine until I tried to create a backup. It says can't mount SD Card.dunno why!
Click to expand...
Click to collapse
mount sd card via cwm first.
Nice work ganesh
Thanks for your efforts
Sent from my GT-I9003 using Tapatalk
possible for new CWM version kpn ?
thank alot sir.
will it support EXT4 ??
thnks man!!
vivekkalady said:
will it support EXT4 ??
Click to expand...
Click to collapse
No Man ... not figured it out yet.
@ganesh
For ext4 take the three modules from my cf-root, open them with an hex editor and search for 2.6.35.7..... then change the part after CL to match with your kernel version.... Good luck!
Inviato dal mio GT-I9100 usando Tapatalk
CWM can't amount sdcard, data, cache. Please help me.
Related
Clockworkmod(CWM) 4.0.0.2 - (Comes with CWM.apk)
http://www.mediafire.com/?0ozzcl3f2be5tke
http://www.sendspace.com/file/0hrlol
http://www.filedropper.com/cwm4002i9103
http://www.bigupload.com/en/file/29399/cwm-4.0.0.2-i9103.rar.html
1) U will need Odin v1.8.5 to flash CWM.
http://www.mediafire.com/?36mcl2rs5gwrvsj
http://www.sendspace.com/file/s2al2m
http://www.filedropper.com/odin3-v185_2
http://www.bigupload.com/en/file/29401/odin3-v1.85.zip.html
2) Shut down ur phone completely n make sure it is unplugged from ur PC.
3) Enter download mode by holding down the Volume down and center button and turning on the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Press Volume up to continue
5) Run Odin on ur PC and follow these settings
6) Connect your phone to ur PC and Odin will detect ur phone and the COM ID turns yellow.
7) Click on PDA and select the CWM file that u downloaded earlier. (NOTE : File name in picture is different.)
8) Click on Start and let Odin flash your phone. Wait for the Green Light and let ur phone restart.
You have successfully flashed CWM 4.0.0.2 to ur SGR !
To enter CWM Recovery menu.....
1) Shut down ur phone.
2) Turn on the phone
3) Once u see the first screen
Press Volume Up and Center button together.
4) Finally u are in CWM Recovery Menu
Learn how to use CWM Recovery from
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
U can flash CWM mod without root on ur i9103.
Remember to back up ur backup to ur PC in case ur SD crashes.
** Pictures do not belong to me and were sourced from google image search. All pictures belongs to respective owners.**
Wow, I installed cwm on mine looong time ago, but I'm really impressed how thoroughly you explained that! In a really didactic way. Well done!
m.kochan10 said:
Wow, I installed cwm on mine looong time ago, but I'm really impressed how thoroughly you explained that! In a really didactic way. Well done!
Click to expand...
Click to collapse
Just a small way of showing my thanks to all that have helped getting our own thread/section to make our home in XDA.
I will try to do another for the rom later if i have the time.
Cheers !
Thank But I have some Qestions
Flash CWM to the phone does make the download mode counter to run
Sorry for my poor english.
YOKBOA said:
Thank But I have some Qestions
Flash CWM to the phone does make the download mode counter to run
Sorry for my poor english.
Click to expand...
Click to collapse
I wouldn't know and i dun really care about the warranty.
Android phones are made to be messed around with.
If u are afraid, stay with ur stock phone and dun root or CWM.
Else u can always buy the USB Jig to reset the counter for less than US$4.
Cheers !
to install zip bags from CMW is safe and convenient.
good job!
YOKBOA said:
Thank But I have some Qestions
Flash CWM to the phone does make the download mode counter to run
Sorry for my poor english.
Click to expand...
Click to collapse
No it doesn't don't worry
Can i flash this? m on 2.3.5 inu indian version
Sent from my GT-I9103 using XDA App
SbXLivE said:
Can i flash this? m on 2.3.5 inu indian version
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
U can flash this to ANY ROM,stock or custom,rooted or unrooted,male or female,as long as u have a Galaxy R I9103.
Installing CWM thru ODIN doesn't increase the counter, just confirmed!
and Russian support
is there italian language?
Some admin copied my [Guide] without even leaving a thank you note......But i'll take it as a compliment hehehehe.....
http://forum.gizmolord.com/index.php?topic=2779.0
s4sixty said:
Some admin copied my [Guide] without even leaving a thank you note......But i'll take it as a compliment hehehehe.....
http://forum.gizmolord.com/index.php?topic=2779.0
Click to expand...
Click to collapse
Next thing you should do is login in to that forum and link this thread over there.
@s4sixty
Hey!
Have you compiled CWM for this phone? I am asking, cause I am looking someone to help me with cwm for my phone. I have Samsung Galaxy S I9070 Advance, which is very simliar phone to this one (here see comparison). I wonder if I could send you some informations about partitons and recovery from my phone, and you could tell if it is the same as Galaxy R?
Thanks
can i use this file to root latest office rom ZSLE5?
thx ...
qzem said:
@s4sixty
Hey!
Have you compiled CWM for this phone? I am asking, cause I am looking someone to help me with cwm for my phone. I have Samsung Galaxy S I9070 Advance, which is very simliar phone to this one (here see comparison). I wonder if I could send you some informations about partitons and recovery from my phone, and you could tell if it is the same as Galaxy R?
Thanks
Click to expand...
Click to collapse
Sorry for late reply. I'm not Dev.
I'm just sharing what i found on the other threads only.
Sorry pal.
WuSoLo said:
can i use this file to root latest office rom ZSLE5?
thx ...
Click to expand...
Click to collapse
Yes u can or u can also use ardatdat's kernal to speed up ur stock rom.
Cheers !
s4sixty said:
Yes u can or u can also use ardatdat's kernal to speed up ur stock rom.
Cheers !
Click to expand...
Click to collapse
thanks a lot.
Shouldn't this be removed/updated since we have CWM6 ?
Read 1st :
DO WITH YOUR OWN RISKS !! I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM.
Click to expand...
Click to collapse
Read 2nd :
This rom only for Tablet base Allwinner A10 LY-F1, and TREQ, 512RAM/4GB Internal Storage, maybe compatible with another tablet. do not flash for 1GB RAM because doesnt work.
Click to expand...
Click to collapse
Read 3rd :
Recommended to charge your cell phone at least >90% to prevent failure during flashing process
Click to expand...
Click to collapse
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Changelog v4.0 BETA 1 :
Base latest firmware Official Treq.
Busybox run-parts (init.d) - experimental.
Bootanimation.
Change Default Wallpaper.
Change File Manager (you can use root explorer, goto File Manager and goto setting, check root explorer and mount r/w system).
Fix value sdcard for optimize scanning.
Fix mount partition.
Nandd EXT4 Filesystem.
Pre-Rooted.
Zipaligned for optimize all apks.
Removed initlogo.
Removed and Format OEM partition.
Removed apk : LiveWallpaper, and Flash Player.
Reboot Recovery.
Insert apk : DSP Manager, Superuser, Terminal Emulator.
and many more.
Click to expand...
Click to collapse
Download link : Mediaf*re
How To Install :
Upgrade your OS to Android 4.x (Ice Cream Sandwich).
Flash CWM Recovery here the tutorial
Download the rom, and move to your SDcard.
Turn off the device and goto CWM Recovery (hold power on/off button with volume up button).
Install zip from sdcard ,and install the rom (it can take a while minute).
After done, i recommended to wipe data and wipe cache.
Last, please reboot your system
Credit thanks to :
fun_ for CWM Recovery
save for update #1
save for update #2
flowish said:
Fix mount partition.
Click to expand...
Click to collapse
Does this mean we doesnt need to edit the vold.fstab to get TF-card mounted as "sdcard" instead the OEM partition?
what version of CWM recovery do you use for your tablet? mine is Treq A10C, i've already installed the CWM recovery but the "back/return" button doesnt work :crying::crying:
Kevin Adisaputra said:
Does this mean we doesnt need to edit the vold.fstab to get TF-card mounted as "sdcard" instead the OEM partition?
what version of CWM recovery do you use for your tablet? mine is Treq A10C, i've already installed the CWM recovery but the "back/return" button doesnt work :crying::crying:
Click to expand...
Click to collapse
yes , im edit vold.fstab for working TF-Card mounted as external storage ..
back/return button works fine .. you need repeat volume (-) button as 40x or get the message "back button is enabled"
hey flowish im using treq a10 basic 2 and i need a Working cwm....
do u know which suit with my tablets please?
Sent from my GT-I9100 using XDA Premium HD app
apenz147 said:
hey flowish im using treq a10 basic 2 and i need a Working cwm....
do u know which suit with my tablets please?
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
did you try CWM recovery by _fun ??
or you can requests your own cwm from here
Another LY-F1 rom to try, great news
Will be giving this a go when I get in tonight.
Have any changes from stock been made to the market or to build.prop?
flowish said:
did you try CWM recovery by _fun ??
or you can requests your own cwm from here
Click to expand...
Click to collapse
nope i didnt try it....
can u take me to there please?...
i need it to install custom rom cause the stock rom is not good for playing HD games like ashpalt etc....
thanks before
Sent from my GT-I9100 using XDA Premium HD app
please can u help me out?....
Sent from my GT-I9100 using XDA Premium HD app
apenz147 said:
please can u help me out?....
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
please read 1st the tutorial before your install this rom.
flowish said:
Read 1st :
Read 2nd :
Read 3rd :
Screenshot :
Download link : Mediaf*re
How To Install :
Upgrade your OS to Android 4.x (Ice Cream Sandwich).
Flash CWM Recovery here the tutorial
Download the rom, and move to your SDcard.
Turn off the device and goto CWM Recovery (hold power on/off button with volume up button).
Install zip from sdcard ,and install the rom (it can take a while minute).
After done, i recommended to wipe data and wipe cache.
Last, please reboot your system
Credit thanks to :
fun_ for CWM Recovery
Click to expand...
Click to collapse
why this rom doesn't work on ram 1GB?? can u explanation this ?
thanks before
cooler1182 said:
why this rom doesn't work on ram 1GB?? can u explanation this ?
thanks before
Click to expand...
Click to collapse
because the firmware is not same .. im working this rom from stok firmware 512mb, i dont know it will work for 1GB
Will it work with boxchip a13 treq basic 2? No?
flow, there's a new 4.1.1 stock rom for LY-F1. will you make a rom base from that?
mewatashiakumoi said:
Will it work with boxchip a13 treq basic 2? No?
Click to expand...
Click to collapse
no
woelank said:
flow, there's a new 4.1.1 stock rom for LY-F1. will you make a rom base from that?
Click to expand...
Click to collapse
no, i will compile a new rom with cyanogenmod source JB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Here !
Click to expand...
Click to collapse
Enjoy !
Credits:
*abcdjdj for helping in every step !
*Sony
*Me !
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
abcdjdj said:
Nice work bro. Hopefully we should see more custom roms and development for these phones now.
Click to expand...
Click to collapse
yeah also helpless locked bootloader users ! :angel:
I Can install in my ST23a or is only for ST23i??????????????
monsluid said:
I Can install in my ST23a or is only for ST23i??????????????
Click to expand...
Click to collapse
Its for ST23i but give it a try on ST23a !
P.S. Use flashtool if it doesnt work !
Can I flash it over cm10
Sent from my ST23i using xda premium
Cm10 uses fxp's custom kernel ! So you cant flash it over cm10..
Sent from my ST23i using xda app-developers app
zeetwo-raj said:
Can I flash it over cm10
Sent from my ST23i using xda premium
Click to expand...
Click to collapse
Not sure if this will work, but you can try this:
Flash the flashable stock ROM, when it's done, turn your phone of, connect it to the pc, and flash the stock kernel.sin.
It's in the FTF files, you can extract it from there. That's the only way I think you could fix your phone as fast as possible. Also, when flashing this stock ROM you must format system and do a wipe data/factory reset, like usual.
If you feel less internal memory;
If you feel that your internal memory is LOW after clean installation,
install a root browser and navigate to the /Data folder and delete ALL of the Lost+Found folder !
Tried by: Gamer649
Reviews are welcomed !
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Killawave said:
I have tested.
It is working well. Stock firmware version with root.
Could be a good way to debug in case of crash...if the CWM is still alive. ^^
Good job.
Click to expand...
Click to collapse
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
ShivangDave said:
If you use vengeance CWM is integrated but in stock kernel its necessary to install CWM again !
Click to expand...
Click to collapse
U can put cwm files in rom so it will installed automatically when u install rom :good:
nishuy21 said:
U can put cwm files in rom so it will installed automatically when u install rom :good:
Click to expand...
Click to collapse
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Killawave said:
In fact, it would be the best to do.
I tried several time the vengeance kernel and it don't work on my device.
You could customize this flashable ROM by adding CWM...and removing bloatware.
Click to expand...
Click to collapse
will release a gaming ROM soon ! still in alpha stage ! but having great progress !
---Link Updated---
11.0.5.8 version can be found here:
http://forum.xda-developers.com/showthread.php?t=2287627
Thanks for this... Will try later.. DOWNLOADING....
Broken Links are fixed and updated ! All the ROMs and Kernels provided by me can be found by clicking on that link or here ! Thank you for your support
All the bugs or queries will be solved after completing cm11 aka Kitkat Project
Stepwise Instructions please!
ShivangDave said:
Bored of flashing stock ROM in .FTF format ?
Want a Flashable STOCK ROM ?
Here It is !
Features:
*Purely Untouched
*Pre-rooted
*Can be flashed over Vengeance kernel as well as stock kernel !
*Based on latest Firmware 11.0.A.5.5 !
Link:
Enjoy !
Click to expand...
Click to collapse
I would heartily like to request you to provide stepwise instructions on how to flash it so that any beginner may gain confidence oh how to do it. Thank you.
Bloatware cleaning tool - Remove desired bloatware in batch
Guys Hello!
Aroma again here to make life easy !
Nothing to say much as title saying Remove desired bloatware from list in batch. It also having option to backup and restore.
Installation guide for Newbies
Requirement
You need to have CWM/TWRP Installed.
Installation
-Download Bloat_Cleaner_AromaVx.zip and copy to int/ext SD card
-Reboot device to recovery, select location of file according you copied
-Select copied file and this will open Aroma
-First page will be Restore page. This is only for restoring previously removed bloatware. press next to skip it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Next Page have first option is Backup, select that so it will make backup of removed bloatwares
-In same page there will be category wise list of bloatwares, select desired app to remove it.
-After finishing it will give msg like this
Click Next and reboot device
If you have selected backup then it will make 'Bloatware' folder in SD card and all bloatware you can find in bloatware/app folder
You can restore it anytime by selecting Restore option in first page of aroma.
Wait.........
Last one.
great
nice wrk ketan is dis wrk for not 1 or only for not2 doc
I thin should work on note1 too but i doubt it may make backup on note1.
dr.ketan said:
I thin should work on note1 too but i doubt it may make backup on note1.
Click to expand...
Click to collapse
okieee doc
thanks sir.
Handy useful tool. Thanks brother.
Thanks for this tool
Sent from my GT-N7100 using Tapatalk 2
Can I use this anytime or like ROM Cleaner, before first boot?
Simone said:
Can I use this anytime or like ROM Cleaner, before first boot?
Click to expand...
Click to collapse
anytime mate..!
Another thing.. i always use rom cleaner after first boot.. because if i use if before the first boot i somehow always fail to connect to wifi during the initial setup phase..
geekynoob said:
anytime mate..!
Another thing.. i always use rom cleaner after first boot.. because if i use if before the first boot i somehow always fail to connect to wifi during the initial setup phase..
Click to expand...
Click to collapse
Wow, really? I always use ROM Cleaner after flashing a ROM and had no problems with it. Thanks for the quick response, mate
Sent from my GT-N7100 using Tapatalk 4
Does the rom cleaner remove the lib files associated with the software?
No, it does remove apk and odex only.
Sent from my GT-N7100 using xda premium
dr.ketan said:
No, it does remove apk and odex only.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
oops! all my 8 thanks hit to @dr.ketan only Wish there were unlimited thanks possible,I would have thanked whole day:good::good:
hi dr ketan....I have upgraded my note n7000 to note II n7100...with original(stock rom while purchase) want your guidance for first roon n then load custom rom...and please advice which is the best rom for sound enahancement.....guide step by step as know everything about n7000 but don't know nething about n7100.....thanks in advance
chappad singh said:
hi dr ketan....I have upgraded my note n7000 to note II n7100...with original(stock rom while purchase) want your guidance for first roon n then load custom rom...and please advice which is the best rom for sound enahancement.....guide step by step as know everything about n7000 but don't know nething about n7100.....thanks in advance
Click to expand...
Click to collapse
My personal advice-
Use stock rom for few days..try to learn all the features and functions of your phone.Since u are new to this phone,rooting and flashing can be bit dangerous(NoteII SDS)..
Your first job is to update to latest 4.1.2 of ur region(if u r still on4.1.1) coz older roms have got sds bug.
For rooting and flashing-
1.Root ur device-
Rooting(thanks to @dr.ketan)
2.EFS backup(thanks [email protected]_id)
3.Flash advanced recovery(TWRP or CWM)
4.Flash ROM(again thanks to @dr.ketan)
best of luck:good:
Thanks @mannyvinny for quick help
Here i like to edit some steps to make easy
1.Go to post said in above msg step1 and select method 2 to root.
2.Download EFS backup tool from here http://forum.xda-developers.com/showthread.php?t=2437066 and copy to SD card
Also Download required CustomROM and copy to SD card
3,Reboot to recovery
select ESF tool, it will start aroma installer, choose to make EFS backup, exit aroma , selet custom ROM flash
That's it.
mannyvinny said:
Since u are new to this phone,rooting and flashing can be bit dangerous(NoteII SDS)..
Click to expand...
Click to collapse
Just adding here to remove misconception
Flashing/Rooting won't cause SDS directly, SDS happens only if you flash any older ROM/Kernel/Recovery (4.1.1). Any ROM/kernel/modem released by samsung after Jan13 are all safe.
@chappad singh
I recommend to read all post on first page of my All in One N7100 thread.
Yes dr. I know that..but why to take risk?if he's using 4.1.1 he should update to 4.1.2 asap..I mentioned this so that he's aware of this serious bug
Btw thanks for clarifying:thumbup:
Sent from my AweSoMe ☆♥Note2♥☆
thanks dr ketan and mannyvinny....I m little expert in note n7000....but as I said It is n7100....wanted to clarify safe tips cause I know there is a brick bug in early jellybean updates....and please advice some good custom rom which has sound enhancement as well as aroma intaller or some unique rom which u like the most.....thanks again
Link: http://droidsans.com/node/184785
Test: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ขอบคุณ. CREDITS TO
@@thanhfhuongf ([ROM 5.0.2]Aurora-N900-Full-G9200-Port-No.2.3)
@Albe95 (For The Icons,and app port)
Is working on N 9005 as well ?
Hi, this rom is by someone else and before posting it here in xda, i think first you have to ask the developer and then after mentioning credits post it...
ok...thanks.
nimish77 said:
Hi, this rom is by someone else and before posting it here in xda, i think first you have to ask the developer and then after mentioning credits post it...
Click to expand...
Click to collapse
รอมนี้ผมโมดิฟายเอง จาก L23 by Dr.Ketan เข้าใจตรงกันนะ
androidguy97 said:
Is working on N 9005 as well ?
Click to expand...
Click to collapse
For N900
How to install this???
cheer cheer cheer
---
แอบมาให้กำลังใจแล้วน่ะ รู้ยัง ^^
ปล. คงต้อง how to วิธีติดตั้งเป็น english ด้วยล่ะ
----
Huyngoc
Bootloooooooop on N900
huyngoc said:
Bootloooooooop on N900
Click to expand...
Click to collapse
Hi, this rom worked for me in cwm and twrp both.... If u are ok kitkat then first get the lollipop bootloader.
1. factory reset/clear cache
2.clear dalvik cache in advanced (for cwm recovery)
3. in mounts and storages option, format system and format data and then flash this rom, 100% working
aki2008 said:
cheer cheer cheer
---
แอบมาให้กำลังใจแล้วน่ะ รู้ยัง ^^
ปล. คงต้อง how to วิธีติดตั้งเป็น english ด้วยล่ะ
----
Click to expand...
Click to collapse
ดีใจหลาย.. อิอิ
cant figure proper way to flash this rom.
nimish77 said:
Hi, this rom worked for me in cwm and twrp both.... If u are ok kitkat then first get the lollipop bootloader.
1. factory reset/clear cache
2.clear dalvik cache in advanced (for cwm recovery)
3. in mounts and storages option, format system and format data and then flash this rom, 100% working
Click to expand...
Click to collapse
can you please describe the right process to flash thi rom.first of all i didnt get zip file.file provided in first link which size is 1.52gb it is in rar format and secod file provided for fix is 198(may be) mb..
whic one to flash and how...
.
.
.
plz help me out how to flash thi rom?
thanks in advance.
cricpunk said:
can you please describe the right process to flash thi rom.first of all i didnt get zip file.file provided in first link which size is 1.52gb it is in rar format and secod file provided for fix is 198(may be) mb..
whic one to flash and how...
.
.
.
plz help me out how to flash thi rom?
thanks in advance.
Click to expand...
Click to collapse
ohk, i understood what u did ,
that file u downloaded is not meant to be flashed. the file contains the rom and some other files so extract it and flash the N900_Note5.zip inside the N900_Note5 folder and no need of other files like n3 camera or something for the rom..
huyngoc said:
Bootloooooooop on N900
Click to expand...
Click to collapse
https://mega.co.nz/#!qtogyYjR!QKm3sN9JA-oZSoxRBRcPZiTlb4Yew9cNPRBxTGQw9dk
nimish77 said:
ohk, i understood what u did ,
that file u downloaded is not meant to be flashed. the file contains the rom and some other files so extract it and flash the N900_Note5.zip inside the N900_Note5 folder and no need of other files like n3 camera or something for the rom..
Click to expand...
Click to collapse
Thanks for reply
when i try to flash that extracted zip it said aborted????
where i am doing wrong??
Appreciate your help
cricpunk said:
Thanks for reply
when i try to flash that extracted zip it said aborted????
where i am doing wrong??
Appreciate your help
Click to expand...
Click to collapse
i hope you are trying to flash this on n900, not n9005 and i have tested this rom several times and it always worked with cwm, twrp and multiboot.
nimish77 said:
i hope you are trying to flash this on n900, not n9005 and i have tested this rom several times and it always worked with cwm, twrp and multiboot.
Click to expand...
Click to collapse
finally successfully flashed rom.isnt this room setting is of s6?
i want list view setting how to do tha?
Please someone test this rom for N900.
& Full theme working or not?
Sent from my SM-G920F using XDA Free mobile app
anuprode09 said:
Please someone test this rom for N900.
& Full theme working or not?
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
tested the rom and there is no full theme support from the theme store directly ... only the icons, wallpaper and icons change and for full theme support u can flash tyhe files of s6 themes into ur overlay folder
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
cricpunk said:
finally successfully flashed rom.isnt this room setting is of s6?
i want list view setting how to do tha?
Click to expand...
Click to collapse
the rom is completely based on s6 and s6 edge features and the current version just has note 5 icons so the settings and everything is based on s6.
Can anyone upload video of this ROM? Thanks
EDGE+ Wallpaper Update