Database Info

[Q] possibly corrutped partition.help to re partition

Just bricked my defy last nigh accidentally then flased a full nordic 2.2.2 via rsd lite everything went fibe BUT when i was going to install some roms via nandroid backup I get this errors.
tried flashing a 2.1 eclair but it wont boot up so I reflashed the 2.2.2 nordic for about 10x already
here's what cwm says when restoring
ClockworkMod Recovery v2.5.1.8
Checking MD5 sums...
Restoring System...
Restoring Data...
Restoring ,Android_secure...
Restoring Cache...
Restoring sd-ext
no app2sd partiton found. Skipping format of /sd-ext.
E:Can't mount /dev/block/mmcblk0p2 (file exists)
Can't mount /sd-ext/!
and more when on the stock recovery is says something that it can't mount etc2
please help me out guys this is really important
ive read through some forums and found that I need to repartition.how?what's the easiest way?
tried wiping dalvik cache but it fails too.
cant download from market too.
this sucks.
its my first android phone and now im messed up!!
I will really apreciate your help please
EDIT:now Im using MIUI but still unable to mount sd-ext
and these few errors
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command
and log
what do O do pls?
sent from my MB525 using XDA Premium App

In stock recovery do factory reset wipe cache and reboot and flash ur SBF....
Sent from my MB525 using XDA App

bricked?
WTH happened?
are u able to go stock recovery? did you do a data & cache wipe?
it should all do it.after u can flash a different & clean SBF.
also try to format sdcard as well..dont bother losing the nand backup...
then just use rsd lite to reflash a different leaked/official 2.2 froyo

hi tnx all for ur help.
yes i am able to go stock recovery and even cwm recovery via 2init 1.4 its a stock clean froyo
im getting this error on stock recovery
it says
E:un able to read cahe/recovery/command and starter
anyone suggestion?
wiping dalvik cant be done due to errors posted above
Sent from my MB525 using XDA Premium App

After wipe and reset just flash SBF...Error is not problem according to me....
Sent from my toilet using my Motorola DEFY

Ok if you heve stock and second init recovery then nothing is lost. What CWM- says is totally OK. And stock recovery always unable to read /cache/recovery/command.
What firmware were you on when installed second init? You sould try to restore the nandroid of that firmware with CWM.
If you wiped your phone with stock recovery then CWM will not work then you should flash your stock sbf with RSD lite.

ok will try when I get back home and will post the results
note: im on cm7 beta 6 b4 this happened.
Sent from my MB525 using XDA Premium App

You have to go back to Nordic, via RSD Lite .
Flash the full rom, since you already flashed the whole sbf one time, you won't be worry about downgradability, it's lost.
Then wipe again, at the end the cwm should work as expected.

Just as a note after i flashed the full Nordic sbf i got stuck so i went into stock recovery and wiped data etc. This let me boot the nordic rom. Then just need to root, install 2nd init and reinstall cm7

yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now

gonemad02 said:
yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now
Click to expand...
Click to collapse
yah that appears on mine too,those unable to read things:i reformat my sdcard clean & i treat it normal since i've been flashing & experimenting a lot,& i dont do a backup of any of my nands i only back up my apps.
since IMO i will never go back to eclair for any warranty,only forward to the developments..
i trust my defy just like i trust the resources i get here in the forums ;D

my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?

gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
Have you tried to format your sd card with your phone?(not from pc)

yes tried it a couple of times already
anyone knows how do I wipe dalvik cache using adb?
these are the remaining errors I still have
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command

Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?

bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
try wiping cache factory and dalvik cache

gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
most probably yes,my card would be on fat32 on default since its 4gb.
unless i force format it w/ fat16 from my pc.but it shouldnt be an issue.
well i get those kinds of errors too.i cant flash the gapps zip for the cm7
i even get failed write to SD whenever i download an app from the market or an unknown file out of the market.

bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
when u see the green robot:
press the volume up & down together to enter stock recovery.
use the volume up/down & power button to select.
tap ok button on the left corner to continue the process of wipe.

I see. we do really have the same issue.
Im now on MIUI.shame...can't even try roms via nandroid backups.
will parted work to fix/format my cache including the sd-ext one?
I cant mount it no matter what I do
I believe parted will work.
and whenever I try to root using super one click
it gives some error regarding cant mount etc2 file exists
but in the ened it's successful.
Sent from my MB525 using XDA Premium App

Errors in our sd card
Well yah.thats tthe reason why im back now on stock blur french..everything back to normal & ready to flash again...i dont know,maybe the card gets corrupted whenever im on a custom rom...
Ok so how's miui?any luck on that one? No time to flash now busy w/ my baby.... Im still longing for the cm7,maybe the nxt rel will be complete.

[Q] Bricked P5100? Help please!

My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!

dwl99 said:
My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
Click to expand...
Click to collapse
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM

DigitalMD said:
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
Click to expand...
Click to collapse
Thanks but Odin cannot see the tablet to re-flash the recovery.

Downlods mode
Then flash new firmware

sembre said:
Downlods mode
Then flash new firmware
Click to expand...
Click to collapse
That's the problem - I cannot access download mode
UPDATE - it just started in download mode! I can manage from here!!

Just for the record you can install adb on the pc and run the command 'adb reboot recovery'. This will force the tablet to reboot in recovery mode.
Sent from my GT-I9300 using xda app-developers app

Jeez, this has taken up most of the day to fix. I came across many problems I have not previously experienced:
1. When the tablet was stuck at the boot animation and I tried to turn it off by long-pressing the power button it immediately restarted. The only way I could get it to turn off was by long-pressing the power button whilst it was connected to my PC.
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
3. Flashing CWM with Odin caused the tablet to reboot into the stock ROM which would not load, in the end I had to untick the "reboot" button in Odin, power it off then manually restart with the Vol- & power buttons.
4. The only way I could get a bootable ROM was by flashing CM10 with CWM. I tried to restore 2 previous CWM backups but on each occasion there was an error restoring the Data partition and I got stuck at the scenario at (1). The backups were made to the external SD card with CWM Touch - is the Touch version unreliable?
I would be really interested if anyone could shed any light on any of this stuff!

For how long did you let it install during the first reboot? It happened to me too, and it took about 10 minutes, maybe even more...
Also, did you try in the "Mount and storage" cwm menu the options "format system", "format data", "format cache" and "format preload" options, prior to re-flashing a ROM? I have read somewhere that for a clean install it's better to do this, as it really clears everything that could mess up the system between two different bases ROMs (like CM and stock).
What I do everytime is using in CWM these 4 "format" options, plus "wipe" system, cache and dalvik, then immediately after this I flash with cwm the new "zip" copied on the card. Then the first reboot is much longer than usual, as at this stage it installs the files, rebuild the dalvik cache etc.
Good luck
dwl99 said:
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
Click to expand...
Click to collapse

I think I gave it a good 20 mins to boot. When I got up this morning there was an error message saying that there was no room to install any more apps even though I had very few installed. Settings -> Storage would not calculate the space available so I figured that the partitions had become corrupted. I did the step by step format you described and reflashed & it all seems to be OK now.

[Q] Trouble Flashing ROM

Got to the point in the How-to guide that says "Navigate to ‘wipe data/factory reset’ and select it.
Navigate to the ‘yes -- delete all user data’ and select it."
Trouble is I get "E: format volume: make_extf4fs failed on /dev/block/mmcblk0p2" and "Formatting /sdcard/ .android_secure..." and a non-functioning progress bar at the bottom.
Is this a battery pull, power off, reboot into recovery? Phone has been stuck like this for more than 30 minutes.
Edit:
Ok, after an hour I powered off and back on, seems like I have a brand new SK stock ROM again >.<
Another edit:
Tried again, same exact thing on wipe data/factory reset: "E: format volume: make_extf4fs failed on /dev/block/mmcblk0p2."
Do I need to flash the kernel like on this video? (https://www.youtube.com/watch?v=W33fcnWAgQg) If so, I'm not sure which kernel to use. I was hoping to flash to the JB ROM which says it contains Bali kernel.
This is no longer fun and all of my data is wiped. LOL even the Play Store is now Android Market like way back when and won't update!

kelltech said:
Got to the point in the How-to guide that says "Navigate to ‘wipe data/factory reset’ and select it.
Navigate to the ‘yes -- delete all user data’ and select it."
Trouble is I get "E: format volume: make_extf4fs failed on /dev/block/mmcblk0p2" and "Formatting /sdcard/ .android_secure..." and a non-functioning progress bar at the bottom.
Is this a battery pull, power off, reboot into recovery? Phone has been stuck like this for more than 30 minutes.
Edit:
Ok, after an hour I powered off and back on, seems like I have a brand new SK stock ROM again >.<
Another edit:
Tried again, same exact thing on wipe data/factory reset: "E: format volume: make_extf4fs failed on /dev/block/mmcblk0p2."
Do I need to flash the kernel like on this video? (https://www.youtube.com/watch?v=W33fcnWAgQg) If so, I'm not sure which kernel to use. I was hoping to flash to the JB ROM which says it contains Bali kernel.
This is no longer fun and all of my data is wiped. LOL even the Play Store is now Android Market like way back when and won't update!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1197533
Also, when flashing a custom ROM, use this CWM file in the root of your SD card (called update.zip)

shadowscott said:
http://forum.xda-developers.com/showthread.php?t=1197533
Also, when flashing a custom ROM, use this CWM file in the root of your SD card (called update.zip)
Click to expand...
Click to collapse
AWESOME. Thank you very much for the help, flashed and running neXus JB 1.3.2.
One more question if you don't mind:
* Do I need to flash the CWM you linked every time I want to flash a custom ROM, or once it's done that it?

kelltech said:
AWESOME. Thank you very much for the help, flashed and running neXus JB 1.3.2.
One more question if you don't mind:
* Do I need to flash the CWM you linked every time I want to flash a custom ROM, or once it's done that it?
Click to expand...
Click to collapse
Once you have CWM on your phone, you don't need to run the update.zip file every you want to flash a ROM. That's it unless you go back to stock via Odin or Heimdall.

[Q] Odin back to UCLB3 (2.3.6.) ATT logo loop + rfs format failed

Hi all,
hope you can help me with this one...
I came from Beanstalk 4.4.240, rooted it way back, everything worked fine.
Now I wanted to get back to stock 2.3.6.... First I tried Heimdall, but its not detecting the phone, although Windows does (Sound at USB connection).
Therefore I switched to Odin as described here: http://forum.xda-developers.com/showthread.php?t=1613523
I used the Option A, adhered to all the rules (including step 4 of wiping cache and data).
Odin flashed successfully.
After reboot though I get the following error in the red recovery mode (after the update package installed successfully):
"e: format_volume: rfs format failed on dev-block-stl10"
"wipe cache not successful"
I then did the cache wipe manually, and it does it successfully.
Upon rebooting though its stuck on the ATT logo loop...
When I then go into recovery mode, the following message appears:
"e:copy_dbdata_media: cant mount /dbdata your storage not prepared yet, please use UI menu for fomrat and reboot actions
Media files copy failed.
#Manual Mode#
...
Successfully applied multi-CSC"
Any ideas what to do here? I'm thinking it could be a partitioning problem...
I just want to make sure I flash the correct thing to fix this...
Oh and currently I moved on to Option B of the odin pack from above in the hope it could fix it - flash is successful, but error messages are completly the same...
Any help is highly appreciated!!!

Fixed
So I tried a different package with PIT, PDA & Phone (this buddy here: http://forum.xda-developers.com/showthread.php?p=27286083)
...and it worked!! Im back at stock

[Q] Moto G XT1033 not charging after bootloop

Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.

savvy54 said:
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
Click to expand...
Click to collapse
You must not use TWRP from its official site
Those people have not fixed this ****ty bug and many people have got bootloops due to this including me
Use the one available in xda
Solution-
Try to boot the phone in bootloader mode
Whenever the device shows the moto logo immediately press and hold power button and as soon as the screen goes black immediately press and hold power + volume down bottom and it should boot into bootloader
Charge the phone through a USB in bootloader mode
And then either flash the stock firmware again or use custom ROMs
Sent from falcon
PRESS THANKS IF HELPED?????

Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked

savvy54 said:
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
Click to expand...
Click to collapse
Link to recovery
http://forum.xda-developers.com/showthread.php?p=57672469
You MUST use the stock version 2.8.6.0 ( do not use the gpe version)
Do not use 2.8.6.0.1 ( it still has bugs)
Flash the recovery through fastboot
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Report back
Sent from falcon
PRESS THANKS IF HELPED?????

sjandroiddeveloper said:
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Click to expand...
Click to collapse
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip <zip name> followed by same error in upadating partrition as above..

savvy54 said:
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip followed by same error in upadating partrition as above..
Click to expand...
Click to collapse
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped?????

sjandroiddeveloper said:
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped
Click to expand...
Click to collapse
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..

savvy54 said:
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
Click to expand...
Click to collapse
Try philz touch from here
https://drive.google.com/file/d/0B7lxW9DP17gNalk2Y3EtcU9JZTA/edit?usp=docslist_api
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED?????

sjandroiddeveloper said:
Try philz touch.
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?

savvy54 said:
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
Click to expand...
Click to collapse
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED?????

sjandroiddeveloper said:
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:

savvy54 said:
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
Click to expand...
Click to collapse
As a general info, just don't play with fastboot commands and now don't try to flash stock firmware through fastboot again as it most likely will mess with your partitions
And for trying different ROMs you need a backed up system and data partition with a fully working recovery, then experiment with whatever ROM you want there is no harm ( if the ROM don't boot you can force reboot and restore the backup you made)
Link to CM 12.1 nightlies
https://download.cyanogenmod.org/?device=falcon
And just so you know cm is fully stable, I have been using it for three months and I never looked back at stock ones
So flash the latest nightly
Link to Gapps
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
Happy flashing
Sent from falcon
PRESS THANKS IF HELPED?????