Any rom with HW accelerated flash? - Nexus S Q&A, Help & Troubleshooting

I had a Defy before and on CM7 the defy had hw acceleration for flash enabled so the videos were smooth up to 480p i missthat feaure on the nexus s. Because the galaxy s can paly 720p flash videos, the nexus s should be able to do the same. I tried a couple rom but it did not work.(AFAIK you just have to add the 720p codec to the codeclist in OMX or thet is what they did with the defy)
If you know a rom with that feature please tell me

in this case, it depends on player
some player uses GPU to decoding , some only uses CPU to decoding .
try "dice player" i use that to play 720p movie
---------- Post added at 04:01 PM ---------- Previous post was at 03:53 PM ----------
also , but i think this has already been done by ROM builder , such as CM7 and MIUI, if so , then you just need to find some player with hardware decoding
use app such as Root Explorer , go system/lib/egl , edit file "egl.cfg"
delete all text, and put
0 1 POWERVR_SGX540_120
Click to expand...
Click to collapse
this should be the second line , you can just delete the first line

qtwrk said:
in this case, it depends on player
some player uses GPU to decoding , some only uses CPU to decoding .
try "dice player" i use that to play 720p movie
---------- Post added at 04:01 PM ---------- Previous post was at 03:53 PM ----------
also , but i think this has already been done by ROM builder , such as CM7 and MIUI, if so , then you just need to find some player with hardware decoding
use app such as Root Explorer , go system/lib/egl , edit file "egl.cfg"
delete all text, and put
this should be the second line , you can just delete the first line
Click to expand...
Click to collapse
I think you might be misreading his post though, he's asking if any ROM for the Nexus S have HW accelaration for flash video. Thus the flash applet in browser/app, not a video player.
Sadly I still can't answer you vick. :/

polobunny said:
I think you might be misreading his post though, he's asking if any ROM for the Nexus S have HW accelaration for flash video. Thus the flash applet in browser/app, not a video player.
Sadly I still can't answer you vick. :/
Click to expand...
Click to collapse
.....oops , sorryyyy

polobunny said:
I think you might be misreading his post though, he's asking if any ROM for the Nexus S have HW accelaration for flash video. Thus the flash applet in browser/app, not a video player.
Sadly I still can't answer you vick. :/
Click to expand...
Click to collapse
Thank you for you answer. I have not found a solution and i am short on time recently to try to modify the code myself. During the weekend i will have an attempt.
720p vids downloaded with tubemate plays with stock payer fine(i use dice palyer for mkv and avi) that is why i think it would only require to modify what decoder the phone should load when opening flash videos.

Hardware accelerated flash is coming in Flash player 11. It will be released in the coming weeks.
Sent from my Nexus S 4G using xda premium

Related

[APP] looking for screen recorder application

Hello i have galaxy s4 gt-i9500 and im looking for a screen recorder application.. just give me the name please
ive been trying some application like SCR Pro, SVR Pro, screencast video recorder but non of them have worked.
I have no idea what the source of the problem is.. maybe the apps itself, the phone itself, wrong settings, or system problem.
i am using crash rom v6.5 with persus kernel latest version.
please help.. what is the best screen recorder application?
Screen Recorder
Sorry if the question bothers you :
Phone is root ?
SCR Screen Recorder Pro needs root to work.
Or : you read, you check if the application is compatible with your rom ?
This is an early BETA preview version so it may not work on all devices and ROMs. Before you buy consider testing a free version to ensure that your device is already supported. If you encounter any issues please report it at [email protected] to help me get your device supported.
pedro2767 said:
Sorry if the question bothers you :
Phone is root ?
SCR Screen Recorder Pro needs root to work.
Or : you read, you check if the application is compatible with your rom ?
This is an early BETA preview version so it may not work on all devices and ROMs. Before you buy consider testing a free version to ensure that your device is already supported. If you encounter any issues please report it at [email protected] to help me get your device supported.
Click to expand...
Click to collapse
yes phone is rooted. application gained root permission as well.
I didnt clearly mention that, because I though after writing "i am using crash rom v6.5 with persus kernel latest version", it should have been clear wouldnt it?
I would like to know a decent application too. I have used Screencast for so long and it worked so beautifully that I never bothered to look for an alternative, but God knows what happened and Screencast doesn't work on I9500! Tried SCR, but okay, but as I demo a lot of tutorial videos which contains installing of some apps and other stuffs, SCR doesn't work, while SCR is on you can't install anything, that option is disabled for some reason.
I would really appreciate if one has found a decently working application, like Screencast or close to it.
No One Found he App Yet ?????
---------- Post added at 08:58 PM ---------- Previous post was at 08:47 PM ----------
darixtorento said:
Hello i have galaxy s4 gt-i9500 and im looking for a screen recorder application.. just give me the name please
ive been trying some application like SCR Pro, SVR Pro, screencast video recorder but non of them have worked.
I have no idea what the source of the problem is.. maybe the apps itself, the phone itself, wrong settings, or system problem.
i am using crash rom v6.5 with persus kernel latest version.
please help.. what is the best screen recorder application?
Click to expand...
Click to collapse
There You Are Mate Here​
Use screwncast from play store well
Sent from my GT-I9505 using Tapatalk 4
daddyspud said:
Use screwncast from play store well
Sent from my GT-I9505 using Tapatalk 4
Click to expand...
Click to collapse
is it working on your s4?
whenever I open the application, I receive an error and cant use it.
""fater error- something is preventing screencast from running.
elbildozer said:
No One Found he App Yet ?????
---------- Post added at 08:58 PM ---------- Previous post was at 08:47 PM ----------
There You Are Mate Here​
Click to expand...
Click to collapse
not working.. I see wired colors in the video and cant even see what I have recorded.
"color fixing" button does not fix it.
darixtorento said:
not working.. I see wired colors in the video and cant even see what I have recorded.
"color fixing" button does not fix it.
Click to expand...
Click to collapse
Hey mate i tested it before i upload it for u..so uninstall it and reinstall
well i had it working a while ago but ive install omega rom and not working again lol maybe update su might work

[Q] 1080P files lag!!

Hi,I'm using android1-7 ROM Build 2013/7/10 with Sultan kernel r36 and i have a a lot of lags while playing 1080P files!! I have tried Dice Player , MX player , Vplayer and All Of them have lags.dice player can't even play and says "Sorry , This video can not be played!" i didn't have this problem in previous Builds! what has caused this problem? Is it because Of Rom Or Kernel Or Something Else??
francesco totti said:
Hi,I'm using android1-7 ROM Build 2013/7/10 with Sultan kernel r36 and i have a a lot of lags while playing 1080P files!! I have tried Dice Player , MX player , Vplayer and All Of them have lags.dice player can't even play and says "Sorry , This video can not be played!" i didn't have this problem in previous Builds! what has caused this problem? Is it because Of Rom Or Kernel Or Something Else??
Click to expand...
Click to collapse
did you try to format the sdcard?
rzr86 said:
did you try to format the sdcard?
Click to expand...
Click to collapse
No! is it related to sd card?? i didn't have this problem with the previous build!!
francesco totti said:
No! is it related to sd card?? i didn't have this problem with the previous build!!
Click to expand...
Click to collapse
it could be but it is just an idea
rzr86 said:
it could be but it is just an idea
Click to expand...
Click to collapse
It wasn't sd card's problem! i switched to Albinoman's CM10.2 And I didn't have that problem! i think it is related to sultan kernel and GPU driver that caused the problem!
francesco totti said:
Hi,I'm using android1-7 ROM Build 2013/7/10 with Sultan kernel r36 and i have a a lot of lags while playing 1080P files!! I have tried Dice Player , MX player , Vplayer and All Of them have lags.dice player can't even play and says "Sorry , This video can not be played!" i didn't have this problem in previous Builds! what has caused this problem? Is it because Of Rom Or Kernel Or Something Else??
Click to expand...
Click to collapse
Few possiblities that may cause this issue:
-Slow SD card (or I/O scheluder)
-Downclocked GPU
-Badass or any other powersaving governor
What you may try do to:
-change GPU clocking (use kernel tuner for this)
-change governor or I/O scheluder (see under CM's performance settings)
-flash another rom
-buy a better sd card
-change decoder at mx player settings to H/W+ or S/W
I installed the Viper 5.1.0 Rom on my Sensation XE and also had lag when viewing 1080p videos. I tried SD card booster app and the problem persisted.
I then went to download the lastest firmware version RUU 3.33 copied it on my SD card and when I did the fastboot (Volume down+Power) it automatically updated the firmware. You have to be patient though, there's a vertical progress bar on the top right so you can see how long you have to go.
Then after it completed the installation and I restarted, the 1080p videos played smoothly.
Therefore the problem here isn't the SD card being too slow, but the old firmware which couldn't decode the 1080p video file.
Hope this helps all the XE users out there.
My phone is unlocked and s-on.
Which one? Is that a file you recorded in same handset or a movie downloaded from internet?
Sent from my HTC Sensation using Tapatalk
---------- Post added at 05:38 PM ---------- Previous post was at 05:30 PM ----------
Some movies wont play if the Reframe is more than 3 ,profile is more than 4.1 and container has lossless audio like pcm ,thd ,dtsma.
Sent from my HTC Sensation using Tapatalk
XbadaxeX said:
Which one? Is that a file you recorded in same handset or a movie downloaded from internet?
Click to expand...
Click to collapse
Playing 1080p videos downloaded from Youtube

[Q] unsupported device error on android x86 4.4

I have tried to run MX Player on X86, but get this error - unsupported device.
What can i do to make it work?
P.S. : Log is attached.
unsupported said:
I have tried to run MX Player on X86, but get this error - unsupported device.
What can i do to make it work?
P.S. : Log is attached.
Click to expand...
Click to collapse
are you trying it in a desktop by using android-x86 project rom?
ktsamy said:
are you trying it in a desktop by using android-x86 project rom?
Click to expand...
Click to collapse
Yes. I run android x86 v4.4 installed from
android-x86 org
android-x86-4.4-r2.iso
unsupported said:
Yes. I run android x86 v4.4 installed from
android-x86 org
android-x86-4.4-r2.iso
Click to expand...
Click to collapse
@unsupported Would you try latest test build from https://sites.google.com/site/mxvpen/translation/test-build ?
CPU features detection is removed for Android-x86 ROM but I'm not sure if it will actually run since x86 codec is optimized for Intel Atom processor.
bleu8888 said:
@unsupported Would you try latest test build from
CPU features detection is removed for Android-x86 ROM but I'm not sure if it will actually run since x86 codec is optimized for Intel Atom processor.
Click to expand...
Click to collapse
Yes, you was right. MX Player started, download x86 codec, and after that did not start. Log file is attached.
P.S. Can i configure MX Player to use some custom codec instead of those shipped with it?
unsupported said:
Yes, you was right. MX Player started, download x86 codec, and after that did not start. Log file is attached.
P.S. Can i configure MX Player to use some custom codec instead of those shipped with it?
Click to expand...
Click to collapse
It looks like native code crash. I will try Android x86 myself.
bleu8888 said:
It looks like native code crash. I will try Android x86 myself.
Click to expand...
Click to collapse
I'm tried run it on D945GCLF2 - working fine. This MB equipped with Intel Atom 330 CPU. But there no hardware support for video decoding and no HDMI out.
unsupported said:
I'm tried run it on D945GCLF2 - working fine. This MB equipped with Intel Atom 330 CPU. But there no hardware support for video decoding and no HDMI out.
Click to expand...
Click to collapse
Did you try HW+ decoder?
Same for me
i get unsupported device too, dell optiplex gx520 p.4 ht, 1gb ram, Android x86 4.4 rc3
It's running decently
But for all my dev, it's a must to have mx player! ^_^
i was thinking about, if exist any way to start mx player from shell with some spetial's configurations?
to get it working...
Klonico007 said:
i get unsupported device too, dell optiplex gx520 p.4 ht, 1gb ram, Android x86 4.4 rc3
It's running decently
But for all my dev, it's a must to have mx player! ^_^
i was thinking about, if exist any way to start mx player from shell with some spetial's configurations?
to get it working...
Click to expand...
Click to collapse
MX Player uses many android internal modules to improve performance. MXPlayer Player will show this message if the modules not compatible.
They could have changed anything which has broken the compatibility. Without proper logs it can't be identified. Kindly use mx log collector & post the logs
Sent from my SM-G900H using Tapatalk
A how-to guide on how to collect MX Player logs can be found here: http://forum.xda-developers.com/apps/mx-player/guide-how-to-collect-logcat-report-bug-t2843144
MX player showing unsupported device in android x86 4.4
I am using android x86 4.4 r3 image. But when I am opening MX Player it is showing unsupported device. Why? Please help. I am using Intel board. I have attached the log file which I collected by MX Log collector app.
---------- Post added at 09:50 PM ---------- Previous post was at 09:22 PM ----------
I am using android x86 4.4 r3 image. But when I am opening MX Player it is showing unsupported device. Why? Please help. I am using Intel board. I have attached the log file which I collected by MX Log collector app.

( Feature Request ) Moving Videos

Hello Guys !!!!
I am an avid media consumer and like all of you I too love to watch videos on MX Player. This is a fabulous app but please add a feature so that we can move videos from one folder to another folder without leaving the app. For instance - If I've to move my YouTube video from " Downloads " folder to " YouTube " folder, I've to go to file manager and do that manually. It would be great if we can move videos within the app.
Thanks in advance and hoping to see this feature in MX Player soon.
Kudos to bleu8888 for developing MX Player !
Best
Desi Heisenberg
Desi_Heisenberg said:
Hello Guys !!!!
I am an avid media consumer and like all of you I too love to watch videos on MX Player. This is a fabulous app but please add a feature so that we can move videos from one folder to another folder without leaving the app. For instance - If I've to move my YouTube video from " Downloads " folder to " YouTube " folder, I've to go to file manager and do that manually. It would be great if we can move videos within the app.
Thanks in advance and hoping to see this feature in MX Player soon.
Kudos to bleu8888 for developing MX Player !
Best
Desi Heisenberg
Click to expand...
Click to collapse
use mixplorer with vlc plugin
or set mx player as default player app
rony raj said:
use mixplorer with vlc plugin
or set mx player as default player app
Click to expand...
Click to collapse
Brother I tried installed Mixplorer and then added vlc plugin but when I open my video in Miplayer it doesn't play. The Player crashes and automatically closes. Tried installing and reinstalling. It still crashes.
By any means can we add that feature in MX Player by tweaking the app ?
mx player v1.8.4 untouched official
partially attach dts/ac3 codes
for arm ,armv7 rest untested
flashable by recovery
for kitkat and below
4.0+ users
for lollipop and above
5.0+ users
requirement
a custom recovery
25-30 mb space in system
update is here
rony raj said:
mx player v1.8.4 untouched official
partially patced for dts and ac3 codes
for arm ,armv7 rest untested
flashable by recovery
Click to expand...
Click to collapse
Kindly do not post any patched version here.
There are lot of users who doesn't aware about the side effects.
Even though you have patched only codec, It will still prevent users from upgrading to new versions.
ktsamy said:
Kindly do not post any patched version here.
There are lot of users who doesn't aware about the side effects.
Even though you have patched only codec, It will still prevent users from upgrading to new versions.
Click to expand...
Click to collapse
But its not a patched version its official mx you can upgrade it in playstore or new version can install over it
also i made no change in it
codes are partially attached with mx
i am officially in support of mx and dev
xda ofcourse
rony raj said:
But its not a patched version its official mx you can upgrade it in playstore or new version can install over it
also i made no change in it
codes are partially attached with mx
i am official in support of mx and dev
xda ofcourse
Click to expand...
Click to collapse
Sorry. It was a misunderstanding. I thought that it's patched version as you have mentioned t as patched.
Now, I have checked the package & It's basically a flashable zip with custom codec library instead of MX Official ffmpeg library.
Anyway it's quite old version & updating it will loose the ac3/dts support.
Note: Post Restored
ktsamy said:
Sorry. It was a misunderstanding. I thought that it's patched version as you have mentioned t as patched.
Now, I have checked the package & It's basically a flashable zip with custom codec library instead of MX Official ffmpeg library.
Anyway it's quite old version & updating it will loose the ac3/dts support.
Note: Post Restored
Click to expand...
Click to collapse
Since failed attatch ac3/dts codes with latest mx player force close error
i think hw+ codes in latest devices support ac3/dts codes
all libs in latest mx is 0 kb
size of package is reduced to 15 mb to 9 mb
but old devices/custom roms has no much play power with new mx
note:- remove patch in post
rony raj said:
Since failed attatch ac3/dts codes with latest mx player force close error
i think hw+ codes in latest devices support ac3/dts codes
all libs in latest mx is 0 kb
size of package is reduced to 15 mb to 9 mb
but old devices/custom roms has no much play power with new mx
note:- remove patch in post
Click to expand...
Click to collapse
Probably you might have downloaded generic version which doesn't have the Codecs. Just download the neon version. It will be 18 mb.
update for 4.0+ users
update for 5.0+ users
rony raj said:
i think this is neon version
test it soon with codes
Click to expand...
Click to collapse
Why do you go for some unofficial/untrusted website?
You can always download the latest official version on our website.
http://mx.j2inter.com/download
Del
ktsamy said:
Why do you go for some unofficial/untrusted website?
You can always download the latest official version on our website.
http://mx.j2inter.com/download
Click to expand...
Click to collapse
Working with attach codes successfully
rony raj said:
mx player v1.8.4 untouched official
partially attach dts/ac3 codes
for arm ,armv7 rest untested
flashable by recovery
for kitkat and below
here
for lollipop and above
here
requirement
a custom recovery
25-30 mb space in system
update is here
Click to expand...
Click to collapse
It says me bad zip file installation aborted on Cwm recovery and I have Mx palyer pro already installed
shahid bhai said:
It says me bad zip file installation aborted on Cwm recovery and I have MC palyer pro already installed
Click to expand...
Click to collapse
uninstall any version of mx player
flash through twrp
i test it works on all device
enjoy
rony raj said:
uninstall any version of mx player
flash through twrp
i test it works on all device
enjoy
Click to expand...
Click to collapse
It not installing still shows bad zip installation aborted
rony raj said:
uninstall any version of mx player
flash through twrp
i test it works on all device
enjoy
Click to expand...
Click to collapse
Thanks bro I have successfully installed it thanks for your great work

ac3 support broken starting from ver 1.10.24

I have mx player pro with custom codec...
The ac3 support is broken in version 1.10.24 on two of my devices : Galaxy Tab S3 and Qintaix Q39 (RK3399 TV Box)...
No problem on my Galaxy S6 smartphone.
The issue is reproducible by uninstalling and reinstalling... All is OK when I revert back to ver. 1.10.23.
Kindly
Abdel.
abdelhachim said:
I have mx player pro with custom codec...
The ac3 support is broken in version 1.10.24 on two of my devices : Galaxy Tab S3 and Qintaix Q39 (RK3399 TV Box)...
No problem on my Galaxy S6 smartphone.
The issue is reproducible by uninstalling and reinstalling... All is OK when I revert back to ver. 1.10.23.
Kindly
Abdel.
Click to expand...
Click to collapse
What is the error message?
Sent from my SM-N950F using Tapatalk
vash_h said:
What is the error message?
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
I get a toast message "Le format audio (ac3) n'est pas pris en charge." in french which means "Audi format (ac3) is not supported".
Does anybody else faces the same issue?
abdelhachim said:
Does anybody else faces the same issue?
Click to expand...
Click to collapse
Can you please specify the version number? Kindly try to clear the app data and open the app again with working internet connection. Once the configs are updated from our servers, AC3 should work as expected.
Tested MX Player Pro version 1.10.25... (screen-shot attached)
I tried clearing cache and app data, uninstalling and reinstalling : same issue : ac3 is not supported in HW+ but is supported in HW.
When I revert back to version 1.10.23, all is OK.
Device : Galaxy Tab S, android 8
Attached is the bug report
You can jump to time stamp : 11-29 19:33:01.079 in log file
MXPlayer said:
Can you please specify the version number? Kindly try to clear the app data and open the app again with working internet connection. Once the configs are updated from our servers, AC3 should work as expected.
Click to expand...
Click to collapse
Please take a look at my two precedent posts (I didn't quoted you)
abdelhachim said:
Attached is the bug report
You can jump to time stamp : 11-29 19:33:01.079 in log file
Click to expand...
Click to collapse
Thanks for sharing the bug report with us. We will investigate this further and get it fixed for you.
---------- Post added at 09:40 PM ---------- Previous post was at 09:21 PM ----------
abdelhachim said:
Please take a look at my two precedent posts (I didn't quoted you)
Click to expand...
Click to collapse
We couldn't reproduce the issue on our side. It seems that AC3 support is not available on your custom codec. In 1.10.23, native AC3 support is controlled by the server. So, It may get the AC3 support from the MX Player's own library as we have enabled it for everyone. Can you please confirm that whether your custom codec has ac3 support or not, or try a different one?
MXPlayer said:
Thanks for sharing the bug report with us. We will investigate this further and get it fixed for you.
---------- Post added at 09:40 PM ---------- Previous post was at 09:21 PM ----------
We couldn't reproduce the issue on our side. It seems that AC3 support is not available on your custom codec. In 1.10.23, native AC3 support is controlled by the server. So, It may get the AC3 support from the MX Player's own library as we have enabled it for everyone. Can you please confirm that whether your custom codec has ac3 support or not, or try a different one?
Click to expand...
Click to collapse
Thanks Friend,
It is really odd : I have apparently an old version of the custom codec with the same version number :
This is the old one : View attachment neon-1.9.18.2.zip...
... and this is the new one that works flawlessly : View attachment mx_neon.zip
The two versions show number 1.9.18.2 on the about dialog of MX Player...
I guess a small "error" in the delivery process of the custom codec.
Many thanks Guys.
Abdel.

Categories

Resources