Phone stuck at AT&T logo - Captivate General

I have cwm on my phone when i boot it it stays at the att logo. I tried clearing data and then flashing the rom zip file and it still stays at the att logo.
I put the phone in DL mode and when using odin packages it says all threads completed. But it does not do anything, i tried 2 odin files.
I did this same exact process on another phone and fixed it fine. That now has the latest rom on it, but this phone is not allow me to complete it.

Search for One Click Unbrick in development.

tried that it said successful but still stuck at logo, i went back into download mode and tried odin but same problem says all threads completed

Use a jig, get download mode, and flash a stock ROM.

so my dl mode is not working properly?

Jig is just the easiest way. If you can get it another way, use that method. But you need to be in download mode to flash a stock ROM. I would recommend kb2, as all captivates can run it.

Also, you might want to check that you have a kernel supported by the rom. Some roms have you flash kernels beforehand, and if you don't your phone gets stuck in a boot loop...

mrhaley30705 said:
Jig is just the easiest way. If you can get it another way, use that method. But you need to be in download mode to flash a stock ROM. I would recommend kb2, as all captivates can run it.
Click to expand...
Click to collapse
Since the unbrick click didnt work is there another way?
If not i guess i will just get the jig if i have no choice

ten22 said:
Also, you might want to check that you have a kernel supported by the rom. Some roms have you flash kernels beforehand, and if you don't your phone gets stuck in a boot loop...
Click to expand...
Click to collapse
I was going to say that as well, but you beat me to it.
If you want to get to download mode, just turn the phone off (pull the battery, it doesnt matter how you get it off really). Open your 1click, hold both volume keys at the same time, and plug the phone in via usb.
What rom are you trying to flash?

xboxhaxorz said:
Since the unbrick click didnt work is there another way?
If not i guess i will just get the jig if i have no choice
Click to expand...
Click to collapse
If you can get into download mode, you don't have to use a jig; I find the easiest way is to hold down both volume buttons while plugging in the USB cable. While the phone is off of course.
If you can get into download mode, you should be able to flash to stock with ODIN one-click.
---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------
miztaken1312 said:
I was going to say that as well, but you beat me to it.
If you want to get to download mode, just turn the phone off (pull the battery, it doesnt matter how you get it off really). Open your 1click, hold both volume keys at the same time, and plug the phone in via usb.
What rom are you trying to flash?
Click to expand...
Click to collapse
Sorry, I guess I should have read all the posts first...

alright i just fully charged the battery and got into download mode
i then used this flasher http://forum.xda-developers.com/showthread.php?t=1266172
my phone is now working
thanks all for the help
i have been doing work with inspired so i kind of forgot how to go about loading a rom again with all that modem and kernel info i dont want to brick this again
how would i go about flashing this rom
http://forum.xda-developers.com/showthread.php?t=1066885
i will search in the meantime

Related

Not sure if my phone is bricked or not

Basically when I boot my phone up, all it shows is an image of a phone, a sign with a ! in the middle, and the pic of a pc. Is there any possible way to fix this or do I have to send it back to tmobile? If it helps I dont think my phone is usb debugging mode either
You should be able to fix . try this.
I'm nit able to get my phone into download mode or recovery. Everytime I boot it up it shows the same screen I mentioned in the OP
A_Kuma said:
I'm nit able to get my phone into download mode or recovery. Everytime I boot it up it shows the same screen I mentioned in the OP
Click to expand...
Click to collapse
try turning fone off and taking out the battery.... then ensure your holding down volume up n down buttons while pluggin in usb.... and you get the fone into download mode.... hope that helps
A_Kuma said:
Basically when I boot my phone up, all it shows is an image of a phone, a sign with a ! in the middle, and the pic of a pc. Is there any possible way to fix this or do I have to send it back to tmobile? If it helps I dont think my phone is usb debugging mode either
Click to expand...
Click to collapse
Open Odin 1.7 on your computer and plug your USB into your PC. Now take out the battery and hold down volume keys while plugging in USB and putting battery in. Should bring you to download mode. Once in download mode download kd1 put it into PDA and go for it.
Note:it dosent have to show up in download mode to actually be in download mode. If it shows up a little yellow box means in your in download mode.
Best of Luck
Sent from my SGH-T959V using XDA Premium App
At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though
A_Kuma said:
At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though
Click to expand...
Click to collapse
where did u get ur drivers n did u run odin b4 u plugged in fone?
A_Kuma said:
At the moment Odin doesn't recognize my device, nor does Heimdall. I do have the drivers installed though
Click to expand...
Click to collapse
To be honest I think you might of needed USB debugging
Sent from my cellular device
I believe I have a similar issue, from Krylon's KD1 CWM, i Rezipped correctly, flashed, this this happened..
However, phone sits on Galaxy s4g boot up screen forever.. left it for 15 minutes now.
Also phone will no longer boot into CWM, looks like this may have bricked me.
Yes I did wipes, yes i followed the re-zip instructions correctly, yes I've flashed roms I know the drill.
Anyone know how to fix this? Or does this rom take forever on the first boot? 20+ minutes? doubt it...
And I cant boot back into CWM, Or stock recovery so i'm not sure how to fix this.
It literally either sits on the first Galaxy S 4g screen, or if i hold three button salute, it acts like it would normally boot into recovery, and cycles over and over with no recovery boot.
**UPDATE** Got mine fixed, odin+download mode
I got the drivers from this site and I had Odin running before I tried to put my phone into Download mode, Odin didn't not pick it up
So I got it figured out. You were right about using running Odin before hand, I just had to use a different usb cable. I brought my phone back. Thanks for all your help

SGS 4G won't boot up

I got a little happy last night and tried tinkering with my SGS, and ended up causing it not to boot up. It currently just sits at the Samsung Galaxy S 4G logo screen, so now I'm just trying to go back to stock and start over.
I do not have odin (still not really sure what it is), but I do have CWM and I've wanted to flash this rom; but towards the end of the thread, some users say not to flash this and to use some other rom with odin instead.
Also, this rom won't even flash in CWM. It just says "installation aborted."
Thanks
I just tried flashing this with Odin, using these instructions, and I just got the bricked screen......
Can someone please help me.
recover a nandroid backup...
If you can't figure out Odin, but can boot into recovery, reinstall packages to get into CWM. Then you can restore to your last nandroid backup.
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
adobrakic said:
I can no longer boot into recovery or download. I'm stuck at the screen with the phone and computer with the yellow triangle in between. Odin still recognizes my phone when I plug it in (I think), but that's it. Also, I don't understand what there is to "figure out" about odin anyway. I followed the directions exactly, and the flash simply failed in Odin and when I rebooted, I got stuck at the bricked screen.
Looks like a trip to T-Mobile is in order...
Click to expand...
Click to collapse
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
adobrakic said:
^ omfg man, you seriously just saved my entire Sunday. I have no idea why it didn't work like this when I first tried it, I literally went through the same steps.
Thank you so much.
Click to expand...
Click to collapse
anytime my friend, im glad you didnt have to go to Tmobile
Stuck at Samsung Galaxy S 4G logo screen
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Cheffz said:
Stuck at Samsung Galaxy S 4G logo screen. My phone will go no further. tried pulling the batt, boot to recovery not an option, Any Ideas
Samsung sgs4g 2.2.1 stock
Click to expand...
Click to collapse
yea you need:
Odin
any sgs4g rom like whitehawkx kd1 deodexed
take your battery out, put it back in and hold both the up and down volume buttons, then while holding them down plug your phone into your computer via usb and you will enter DOWNLOAD MODE from there you open odin on your computer and click only the PDA option look for the whitehawkx pda_kd1 file you downloaded and click start
that should fix it
Biggggggggggg Thanks
Sorry but I started a new thread ... before you answered.. my bad.. but on the new thread.. I have a few questions
Have similar problems plz help.
dsexton702 said:
YOU DID NOT BRICK YOUR PHONE!!!!!
when i pulled the cord on my phone during download mode and odin it gave me the same screen as you
THIS DOES NOT MEAN THAT ITS BRICKED
your computer will still recognize your phone and SO WILL ODIN!
that screen is basically another download mode
heres what you do:
download whitehawkx kd1 deodexed
go into download mode like you normally would and plug the phone in
you will notice that odin still recognizes your phone
in odin ONLY press the PDA option and then choose whitehawkx PDA_KD1 file
flash and wait for reset.... then BAM your phone has the new kd1 rom and its not bricked
i promise you the screen your getting doesnt mean a brick, ive seen that screen like 10 times throughout my flashing days
Click to expand...
Click to collapse
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Snappy15 said:
My phone wont boot, after i was messing round with some kernel, need hlp plz.
Click to expand...
Click to collapse
Can you get into either recovery or download mode?
Kyndig66 said:
Can you get into either recovery or download mode?
Click to expand...
Click to collapse
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Snappy15 said:
Thnks for responding quickly :good:
i can get in to download mode, recovery mode i cant get to anymore.
Click to expand...
Click to collapse
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Kyndig66 said:
I'm not sure what ROM or kernel combination you're trying, so here are some suggestions:
From FBis251 - http://forum.xda-developers.com/showthread.php?t=1223765
From thomas.raines - http://forum.xda-developers.com/showthread.php?t=1500427
From bhundven - http://forum.xda-developers.com/showthread.php?t=1358498
Specific Instructions for bhundven's heimdall from lumin30 - http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Click to expand...
Click to collapse
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Snappy15 said:
I was trying before, to get CWM, which worked, but then i couldn't get pass the T-Mobile logo.
Now at the moment i'm in download mode, this one seems quite different because it has a phone icon, with the caution sign in the middle, and the pc at the pc at the right. any more suggestions sir?
Click to expand...
Click to collapse
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
hechoen said:
Flash it with one of the options you've been linked to by Kyndig. The first two are for Odin the last for Heimdall. That's an alternate DL mode your looking at. It still works the same.
Click to expand...
Click to collapse
Thanks it worked.:good:

[Q]how to get into Download mode after soft bricking S2 LTE (ROGERS)

Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
If you cant get into download mode u need a jig order this http://forum.xda-developers.com/showthread.php?t=954458
SII_LTE_User said:
Hi folks,
I've been trying to install custom Rom using Odin to support a language which is not supported with android gingerbread 2.3.5! and it failed after boot.bin...Now, I'm stuck in the Phone---!---PC screen.
I am trying to get into download mode to be able to return to stock using this
Return to stock, fix soft brick :: 11/13: Rogers TAR!
my question: Could I flash while am on "Phone---!---Pc" screen?how can I get rid of "Phone---!---Pc" screen? or should I get USB jig to force into download mode? is it the best solution to restore to stock?
any help would be greatly appreciated !
Click to expand...
Click to collapse
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
LordGeek said:
Even if your phone is shown the "Phone---!---PC" screen .. ODIN should still recognize it being attached to your computer .. My first SGS2 Skyrocket did this in which I was able to reflash back to stock using ODIN v1.85 .. however, my first SGS2 took a real crapper for some reason .. that even the USB JIG was unable to get the phone into Download Mode.
I now have a replacement in which I'm being REAL careful with .. LOL
Click to expand...
Click to collapse
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
SII_LTE_User said:
Actually Odin is recognizing the phone..but im not sure if flashing will work since its not in download mode!!! dont wanna go further doing wrong steps!
Click to expand...
Click to collapse
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
You should be able to get into download mode by just holding volume down you may need to push the power button while holding it
Sent from my SGH-I727R using XDA App
LordGeek said:
You're safe .. put the TAR under PDA .. uncheck everything in ODIN except Reboot and let it rip.
Click to expand...
Click to collapse
the2rrell said:
This will work.......DOOOO IT
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks ALOT...You guyz Rock....I flashed and it's baaaack up and running without even losing my data
So for those who are stuck in same scenario...
YES you can flash with ODIN if you're stuck in Phone--!--PC...I used Return to stock, fix soft brick :: 11/13: Rogers TAR!
-Downloaded I727R tar
-opened Odin v1.85
-turned on my phone(showed the exclamation mark screen)
-Connected to Pc with Usb
-odin recognized it...put .tar file in PDA and hit Start et Voila!
Hope this helps anyone in same situation!
Help
I have tried to root my phone and I can't get it to get past the boot screen. I can get it to the download screen but I cant get anywhere past that...please help. I need step by step instructions please.
Go here it has the step by step instructions. http://forum.xda-developers.com/showthread.php?t=1342348
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
ckck543 said:
Okay so I am having a similar problem. My phone will boot up and it says the "downloading a different os .... and then press volume up to continue and volume down to reboot" and when i press volume up i get a screen saying "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". What do i do? Please and thanks
Click to expand...
Click to collapse
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
---------- Post added at 10:05 AM ---------- Previous post was at 09:51 AM ----------
I see that instructions are step by step but I have a phone that wont let me put it in download mode. My phone wont hookup to my computer. I need help....
K9kazoo said:
Morning y'all... having a similar problem... I was rooted but for some reason when in Recovery I'd only get Android Recovery??? I got CWM installed using ODIN (This is the tread I used... http://forum.xda-developers.com/showthread.php?t=1340526) . Then I went and tried to install miuiscotland_I9100-2.1.13... said install was complete... went to reboot from CWN... and nothing.
I tried pulling battery, going into recovery, download mode, the jig... and nothing... doesn't even look like it's charging... no spark at all?
So I have no phone as it stands right now.
Any comments, suggestions, hints, tips, tricks?
Thx.
B.
Rogers
Galaxy S II LTE
SGH-I727R
Kernel V: 2.6.35.11
Click to expand...
Click to collapse
You are hard bricked. You flashed a i9100 rom over a i727 device.
Only advice I can give is drop it in the toilet if you have insurance on the phone and get a replacement, or call your carrier's warranty department and tell them your phone just stopped working (not particularly ethical and you could get caught if they figure out it was rooted, but worth a shot...).
Oh, and the other advice is NEVER flash roms meant for devices other than the Skyrocket. Roms meant for the original S2 will brick your phone.
---------- Post added at 09:55 PM ---------- Previous post was at 09:51 PM ----------
appdroid said:
Do you have usb Jig. If no than you can make ur own. Let me find you solution to ur problem. And if you have any other device that uses micro usb than try plugging the usb cable to ur phone and see if thats gets u in dload mode.
Click to expand...
Click to collapse
No need for a jig here (though it is good to have one anyways). If you get the "firmware upgrade failed" screen, just plug the phone in and if Odin sees your phone you can flash the stock tar. The "failed" screen won't look like it's doing anything but after Odin finishes you will be back to stock and life will be good again.

[Q] Skyrocket phone stuck onSamsung Logo

Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
IF you ever did nandroid than just restore that otherwise.........
Hey first follow this steps to flash any rom. If you flash the rom properly than you can use any stock rom from dev section and use that.
OR
follow this step to go back to stock and it will unroot you.
Vman7765 said:
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
Click to expand...
Click to collapse
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
I am not sure why it happened but it looks like u cleared cache so that might be the problem. IDK
Vman7765 said:
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
Click to expand...
Click to collapse
Rocketing on Sky IcsĀ”
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
first of all to show that you appreciate my help please hit that thnx button. I am running Sky Ice Rom which is deeply themed rom with faux123's kernel.
Vman7765 said:
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
Click to expand...
Click to collapse
NP thanks for your help. I spammed that button as much as I could lol.
Same Problem
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Follow these steps it will help you go back to stock. ANd reroot your phone.
Barlaw604 said:
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Click to expand...
Click to collapse
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try a different USB port. Avoid rear ports and hubs.
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Have you uninstalled kies? If not uninstall it from your PC. Put your phone in download mode and see if Odin can see the phone.
Sent from my SAMSUNG-SGH-I727 using xda premium
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try another USB port or another computer. If you can get the logo you are in a boot loop, the most common form of a soft brick. If you can get into download mode you should be able to fix it.
---------- Post added at 04:55 PM ---------- Previous post was at 04:46 PM ----------
Barlaw604 said:
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Click to expand...
Click to collapse
Just saw this. Have you tried to re-install the drivers?
Another thought is to try turning off firewall and antivirus when using Odin. I've never had my firewall or antivirus block Odin but I've heard it can happen...
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
mimart7 said:
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
Click to expand...
Click to collapse
What he said. Pull the battery and put it back in. Hold volume up/down and plug in USB. Continue holding volume buttons until you see download mode. Careful not to press the power button during this process.
Sent from my SAMSUNG-SGH-I727 using xda premium
I like how u guys are really trying to help him. Let u guys know that on my first responce I gave him all the steps on how to go back to stock. So if he followed that and nothing happened than he should try USB jig if that don't work than its hard brick!!
Rocketing on Sky IcsĀ”
Barlaw604 said:
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
Click to expand...
Click to collapse
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
skrambled said:
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
Click to expand...
Click to collapse
Yup, when I rooted my phone, the only way I could get it into download was volume DOWN & power.
Sent from my SGH-I727R using xda premium

might be soft bricked...???

i was restoring to an older rom and it said it was restoring boot and then the main maenu came on...it never said it was complete and the menu never comes back on till its done so i figured it was done but now i cant get into recovery or download mode and it gets stuck at the samsung logo..so im screwed ain't i...please help...thanks in advance...
pcrack05 said:
i was restoring to an older rom and it said it was restoring boot and then the main maenu came on...it never said it was complete and the menu never comes back on till its done so i figured it was done but now i cant get into recovery or download mode and it gets stuck at the samsung logo..so im screwed ain't i...please help...thanks in advance...
Click to expand...
Click to collapse
Most likely. Just fubared mine by interrupting a CWM flash thinking it was far enough along to matter. Use this:
http://forum.xda-developers.com/showthread.php?t=1705260
callihn said:
Most likely. Just fubared mine by interrupting a CWM flash thinking it was far enough along to matter. Use this:
http://forum.xda-developers.com/showthread.php?t=1705260
Click to expand...
Click to collapse
how can i use that if i cant get into recovery...?
pcrack05 said:
how can i use that if i cant get into recovery...?
Click to expand...
Click to collapse
Have you had any resolution?
Sent from my SGH-I717 using xda app-developers app
Sorry for the delay, been busy. Try the instructions? Has nothing to do with recovery working. You need odin on your oc and kies ti install the drivers, if it wil go into download mode it can be flashed.
Agreed. Should still be a way to get into download mode, although you may have to use an alternate route. The most reliable method (without extra hardware) is to (once USB cable connected to PC):
Pull battery.
Reinsert battery.
Hold down both volume buttons and plug in the USB cable.
Voila!
Click to expand...
Click to collapse
If that fails, then may need a jig.

Categories

Resources