Rather than bump up my old thread - first read this:
http://forum.xda-developers.com/showthread.php?t=1317575
Went 3 days without dropping data.
1. Root, 2. set to R/W 3. make a folder under /mnt called "radio" (all lower case, no spaces, no quotes, etc).
Gotta leave it as R/W... but it seems to be working.
If this works I'm going to hump you til you love me
ZeppelinJ0 said:
If this works I'm going to hump you til you love me
Click to expand...
Click to collapse
whoa..........
pissinguoff247 said:
Rather than bump up my old thread - read this:
http://forum.xda-developers.com/showthread.php?t=1317575
Went 3 days without dropping data.
1. Root, 2. set to R/W 3. make a folder under /mnt called "radio" (all lower case, no spaces, no quotes, etc).
Gotta leave it as R/W... but it seems to be working.
Click to expand...
Click to collapse
I already have radio folder?
Sent from my Gummy Charged GBE 2.1 using XDA App
Just in case that's too long, I'm running pbj time rooted ee4. Forgot to mention I have my modem set to 3g only, but it looks like most people were turning off lte while troubleshooting data dropouts anyway. I'm going to try 4g at the office next week where I know I get a good signal.
Sent from my SCH-I510 using XDA App
Does it have a file called 3g_traffic in it?
Sent from my SCH-I510 using XDA App
XDAholic said:
I already have radio folder?
Sent from my Gummy Charged GBE 2.1 using XDA App
Click to expand...
Click to collapse
If you'd read the original post (the one I said read) you'd see what ROM I was using and under what conditions this worked
pissinguoff247 said:
Does it have a file called 3g_traffic in it?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Yes it has both files in it 3G and LTE.
I am running GBE. Maybe that's VZW fix for data drop issue. I'm still droppin dats tho. Thanks for trying to help.
Sent from my Gummy Charged GBE 2.1 using XDA App
XDAholic said:
Yes it has both files in it 3G and LTE.
I am running GBE. Maybe that's VZW fix for data drop issue. I'm still droppin dats tho. Thanks for trying to help.
Sent from my Gummy Charged GBE 2.1 using XDA App
Click to expand...
Click to collapse
What about the read/write thing? I tried that when I noticed I was getting the errors in the error log. What's your log looking like? Any errors? I'm almost willing to try flashing a GB rom and checking it out. But I start stock and work my way up.
So far it's working for me. I normally get 4g for a minute or two before it switches to 3g/1x or dies. I toggled airplane mode and Now it's been on 4g and hasn't gone to 3g/1x since.
EDIT: It switches to 3g every now and then but thats alright.
I flashed EE4 radios on EP3 rooted and have a much more stable signal. Rarely drops out.
Edit: no sooner than posting this I drop data. I have that folder though.
Nevermind re read and its not what I thought
I get many data dropouts daily running EP3HA debloated.
Went to check that I have the /mnt/radio folder, it's there, both LTE and 3G log files are in there, and Root Explorer tells me that the content is already set to R/W.
Still waiting on Samsung for a solution I guess..
GC FE 2.0 with PBJT kernel and ep3 modems. The radio folder was missing for me... will report back on any changes
Sent from my SCH-I510 using Tapatalk
Did not notice any change from adding this folder. Also, the folder would be gone after each time I restarted the phone.
Not long after (unsure if there is a correlation, doubt it) EP3 modems started dropping data excessively. Re-ODINed the modems and all is well now.
Related
So lately I've been having this problem where all of a sudden I won't be able to send text messages, so I was trying to troubleshoot and I noticed that when that is happening the 3G icon is still present but status shows 0 dBm and that I'm still connected to CDMA rev A but nothing works, not even internet I literally have to restart my phone to get it to work properly again.
Anybody got ne ideas?
Sent from my SCH-I500 using XDA App
*228 prl update?
also, what are you running on your phone. more details will be helpful. If you are running a custom kernel / rom try a different kernel.
I've done the prl update.
I'm running the mesmerize 6/16 Heinz 57 rom with the OTB 1.6 from nemesis.
I'm also heavily undervolted.
Sent from my SCH-I500 using XDA App
cpfeifer said:
I've done the prl update.
I'm running the mesmerize 6/16 Heinz 57 rom with the OTB 1.6 from nemesis.
I'm also heavily undervolted.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Try increasing your voltages, and see if the problem is fixed...
Sent from my SCH-I500 using XDA Premium App
Masta Of Evil said:
Try increasing your voltages, and see if the problem is fixed...
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Will do I wonder why undervolting would effect the radio.
Sent from my SCH-I500 using XDA App
I would imagine that undervolting the processor could affect any part of the phone, including signal searching. You also might want to just try a different kernel. I have had good results with peanut butter and others. I know people were having trouble with OTB 1.6 in that particular release.
Also, you might try adjusting settings as perscribed in this thread, though I don't know much about the hidden menu:
http://forum.xda-developers.com/showthread.php?t=1123621
livinsacrfice said:
I had an opposite issue from you last week (was stuck roaming and could not get onto cellular south towers). I fixed it following steps from dfgas.
Since you have h57 rom, you can try the following:
menu->tsm parts-> hidden menu ->data debug -> hdr/1x selection (if it asks for a code at any point, it's '000000').
Toggle the setting. For me toggling cdma/hybrid got me off of roaming when i was stuck. After the fact, I noticed setting it to evdo only would put me on roaming (I do this at work to get 3g, since Csouth doesn't have 3g at my plant)
Hope this helps.
Click to expand...
Click to collapse
I use the wireless tether 3.1 and after a couple minutes i get booted off. My settings are fascinate on first drop down which is what everyone said it should be and the second dropdown i had it set on master and auto but neither seem to help. Any ideas or solutions. I thought about trying opengarden but its a adhoc only, but if you dont get booted on it maybe thats a solution.
Sent from my SCH-I510 using XDA App
I *thought* found my own solution. It lasted for a while then started doing it again.
Its still beta and SUPER buggy. Ill post the right version for you.
Use this one, you wont have issues. http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0_8-pre1.apk
Ill try this and report back. Thanks
Sent from my SCH-I510 using XDA App
It wont let me install. It says i need to free up space. The program is 420 and i deleted almost 700 so the room is there any ideas
Sent from my SCH-I510 using XDA App
I have. 93 gig on internal and 21 gig of external. I dont get it
Sent from my SCH-I510 using XDA App
piperat said:
I have. 93 gig on internal and 21 gig of external. I dont get it
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Restart your phone? 420, hell yeahhh. If that doesnt work, id use history cleaner and wipe your cache. Or boot into recovery, if THAT doesnt work. Id do a wipe.
Lol '420' ill try them things
Sent from my SCH-I510 using XDA App
Lmao, sounds good man. Let me know.
You prolly just have to uninstall the old version of WT
No Dice. I tried all suggested solutions. Plus I tried other older versions of it and got the same message. I would think someone has figured this out. If someone has working wifi tether please package and pm me.
blarick did you try it to see if it worked. I think your after the same things I am.
Bump
Sent from my SCH-I510 using XDA App
I use Open Garden and it works great. I drive a truck and the computer stays connected all day long via Open Garden and doesn't drop the connection once all day. I was using Barnacle but lost connection a lot with that one.
Chopstix9 said:
I use Open Garden and it works great. I drive a truck and the computer stays connected all day long via Open Garden and doesn't drop the connection once all day. I was using Barnacle but lost connection a lot with that one.
Click to expand...
Click to collapse
Open garden is adhoc only. Certain devices wont run on that. I need to be able to set up an infrastructure. V3.1 offers that but is not reliable. There are other ones too but my phone says that there is not enough space. The wierd part is that i have way plenty of space. Thats where im at now.
Sent from my SCH-I510 using XDA App
Im bumping this. Im not the only one trying to power tablets and psps. Please someone help.
Sent while getting a 'humble charge'
Bump please revs help
Sent while getting a 'humble charge'
I have 3.1 working fine on the ep1f leak. Here are my settings. Profile Fascinate, Method Softap for samsung. changed the channel to 4 or 5 your choice really. If there is a wireless router nearby on channel 1(which most are factory set at) you will get interference. Also try this I had to do it on my wife's phone. Uninstall wt reboot then reintall. Let the phone get completely up(media scanning and everything). Then try and run wt again. I've gotten 3.1 to work on a bunch of phones. Hoope that helps.
Hey man, sorry to hear nothings worked out... Sad to say but why dont you try to mount your SD card, make a new folder on your desktop and back up everything on your SD. Go under my computer, right click the disk and format it. Do an odin restore to ED1, keep it stock. Let it update to EE4, then flash an EE4 Odin rom that gives you root, such as this one. http://www.androphiles.com/files/android/EE4deodx_DXC.tar.rar then your kernel and rom. I mean, I know you probably dont want to hear this kind of answer but if nothing else has worked then this might be your only option. As for getting infastructure working, I saw a thread on it. Ill post it once I find it. PM if it worked.
Edit: I link that I found says to download the newest tether, which obviously you are having problems with... So give it a try again after you do a full wipe.
Hello,
I am a Canadian Rogers customer and I just flashed my Infuse while in West Memphis.
Infused works great, but now it does not indicate that I'm roaming when I am. (If I go back to the stock ROM it shows I am roaming)
It would be fine except that it keeps data on while in the US and that will get very expensive.
Anyone know how I can fix this without going back to stock ROM?
Thanks!
Sent from my SAMSUNG-SGH-I997 using XDA App
Turn data off.
Sent from my SAMSUNG-SGH-I997 using XDA App
Well that doesn't solve the issue, it puts a bandaid on it. I would like a correct fix. I am sure its possible.
Anyone?
Sent from my SAMSUNG-SGH-I997 using XDA App
Nevermind
As I am a noob at this, I tried what seemed obvious and flashed the Rogers modem.bin and it fixed that problem.
Thanks!
Good to know ... thanks
Cranky...
I was reading through the forums today and read that if you live in a non 4g area, (which I do, there is no 4g in any direction of me within 30 minutes) that you should toggle your system settings from LTE/cdma to cdma... though I have noticed a difference in longevity of my battery, my wifi doesn't work...? It simply says error next to wifi in settings.. lol. Any help/suggestions would be awesome! I'm assuming wifi works off the same radio as the lye and that's my problem???
Sent from my SCH-I510 using XDA
stebomurkn420 said:
I was reading through the forums today and read that if you live in a non 4g area, (which I do, there is no 4g in any direction of me within 30 minutes) that you should toggle your system settings from LTE/cdma to cdma... though I have noticed a difference in longevity of my battery, my wifi doesn't work...? It simply says error next to wifi in settings.. lol. Any help/suggestions would be awesome! I'm assuming wifi works off the same radio as the lye and that's my problem???
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
What ROM/kernel combination are you running? An FP1 ROM with an EP4 kernel, or vice versa, will cause that exact problem.
EDIT: To be clear, Wifi and LTE are completely, 100% unrelated. You'll get the wifi error on a mixed rom/kernel regardless of radio settings.
shrike1978 said:
What ROM/kernel combination are you running? An FP1 ROM with an EP4 kernel, or vice versa, will cause that exact problem.
EDIT: To be clear, Wifi and LTE are completely, 100% unrelated. You'll get the wifi error on a mixed rom/kernel regardless of radio settings.
Click to expand...
Click to collapse
Well I'm glad you made the LTE and wifi being unrelated clear for me but, I run dwitherells tweak 2.1/tonsit/ext4/ transparent ice theme. That's why I'm so clueless to the situation. Lol
Sent from my SCH-I510 using XDA
try one of imnuts kernels, either of the 0504 or 0524 versions. those supposedly fixed wifi
stebomurkn420 said:
I was reading through the forums today and read that if you live in a non 4g area, (which I do, there is no 4g in any direction of me within 30 minutes) that you should toggle your system settings from LTE/cdma to cdma... though I have noticed a difference in longevity of my battery, my wifi doesn't work...? It simply says error next to wifi in settings.. lol. Any help/suggestions would be awesome! I'm assuming wifi works off the same radio as the lye and that's my problem???
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
My phone does that sometimes but when i reboot the problem is solved
Sent from my LG-V909 using XDA
Yes.. a simple reboot was the fix!!!!! Hahaha...
sent from my Droid charge powered by [email protected] 2.1/ pbj tonsit/ ext4/ transparent ics 3.0
kernel
I can't seem to locate imnuts kernel for download. I am having the same wifi error on tweaked 3.1
A link would be great. thank you
jco23 said:
try one of imnuts kernels, either of the 0504 or 0524 versions. those supposedly fixed wifi
Click to expand...
Click to collapse
This is an early release of CM10.1, so several CM features are missing and this is a WIP.
Disclaimer: I am not responsible for anything bad that happens as a result of flashing this, do so at your own risk.
Working:
Phone Calls / SMS
Wifi (doesn't seem to be scanning but it will connect if you manually add a network)
Bluetooth (appears to be working but haven't had a chance to test)
Audio
HW Buttons / Backlights
HW accel.
Sensors
Not working:
Data (obviously)
MMS
Camera
HDMI
GApps: http://goo.im/gapps (Use 4.2)
Build 1 [11/30/12]: http://androtransfer.com/get.php?p=sbrissen/Charge/cm_charge-ota-eng.sbrissen_42_1.zip
Install:
Copy ROM/GApps to sdcard
Reboot into CWM
Flash ROM
Wipe Data (atleast on first install)
Flash Gapps
Boot
Profit
Notes: Since Data is not working, to save battery turn off DataConnection in Mobile Networks settings. To access Developer Options, go to About Phone and tap Build number several times until it tells you you are a developer, then access the options as normal.
Credits:
JT1134
Cyanogenmod
Pawitp
TSM
Is this based off 4.2 Jelly Bean?
bvsbutthd101 said:
Is this based off 4.2 Jelly Bean?
Click to expand...
Click to collapse
Yes.
Sent from my SCH-I510 using xda premium
bvsbutthd101 said:
Is this based off 4.2 Jelly Bean?
Click to expand...
Click to collapse
Yes. Look at the DL links
RIL.
SANTA PLEASE?
Sent from my SCH-I510 using xda app-developers app
chefthomas99 said:
RIL.
SANTA PLEASE?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
Better odds winning the next lottery :banghead:
Still Charged Up
I get this error when I try to flash the ROM.
Can't copy meta-inf/com/Google/android/update-binary
Installation aborted.
Reilly1812 said:
Better odds winning the next lottery :banghead:
Still Charged Up
Click to expand...
Click to collapse
Yeah I don't think they want to keep this phone going. They want us to buy new ones. I'm going to have to wait for income tax refund time. That's OK, I really like my phone with Tweaked on it.
The thing I think is funny is the iPhone commercials keep bragging about stuff my poor old Charge already has.
WOW!! I leave the droid charge community for a few months and this is what happens??? Simply incredible. As I have relegated my charge to WIFI only duty this is nearly perfect. The only issue is that it never actually boots. The boot animation just keeps on going and going and going. Does the file system need to be converted to EXT4 before flashing? I'm using the latest 0302 recovery too. Thanks in advance!
Nevermind. Got it up and running. Seems like the recovery updated itself somehow (shrug) and flashed it using the brand new CWM looking recovery and it's working. Can't wait to play around with this later.
Excuse me while I change my shorts.
Sent from my SCH-I510 using xda premium
Just wondering (I'm not a developer or anything), but to get DATA working couldn't we throw in the Factory Test.apk? I was looking at what was running, and it always is. Then I looked at what it is and it all has to do with the RIL.
I am actually looking into trying this build! I usually have Wi-Fi wherever I go so DATA isn't too big of a problem. If it does ever get fixed I believe this would be the Charge's lifesaver.
Any news on the issue that people are having getting it to install?
Sent from my SCH-I510 using Xparent Red Tapatalk 2
tmanschuette said:
Just wondering (I'm not a developer or anything), but to get DATA working couldn't we throw in the Factory Test.apk? I was looking at what was running, and it always is. Then I looked at what it is and it all has to do with the RIL.
I am actually looking into trying this build! I usually have Wi-Fi wherever I go so DATA isn't too big of a problem. If it does ever get fixed I believe this would be the Charge's lifesaver.
Any news on the issue that people are having getting it to install?
Sent from my SCH-I510 using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
FactoryTest is in this build, it is required for secPhone.apk to work. I'm not actually sure if it helps or not but its in there. I'm not sure on the boot issues, after installing I would just make sure to wipe data and it should be fine.
tmanschuette said:
Just wondering (I'm not a developer or anything), but to get DATA working couldn't we throw in the Factory Test.apk? I was looking at what was running, and it always is. Then I looked at what it is and it all has to do with the RIL.
I am actually looking into trying this build! I usually have Wi-Fi wherever I go so DATA isn't too big of a problem. If it does ever get fixed I believe this would be the Charge's lifesaver.
Any news on the issue that people are having getting it to install?
Sent from my SCH-I510 using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
won't be too long before wifi is everywhere. but I'd rather see camera working before mobile data.... just me though.
jco23 said:
won't be too long before wifi is everywhere.
Click to expand...
Click to collapse
Not where I come from...
jco23 said:
won't be too long before wifi is everywhere. but I'd rather see camera working before mobile data.... just me though.
Click to expand...
Click to collapse
I have wifi at home only. Is someone actively working on data and whatnot?
Sent from my SCH-I510 using xda app-developers app
JihadSquad said:
Not where I come from...
Click to expand...
Click to collapse
chefthomas99 said:
I have wifi at home only. Is someone actively working on data and whatnot?
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
Same here, only at home.
JihadSquad said:
Not where I come from...
Click to expand...
Click to collapse
then move to a city with muni-fi: (j/k)
http://en.wikipedia.org/wiki/Municipal_wireless_network
jco23 said:
then move to a city with muni-fi: (j/k)
http://en.wikipedia.org/wiki/Municipal_wireless_network
Click to expand...
Click to collapse
I said where I come from, not where I live. I live in Madison, WI (UW Madison campus) and there is literally wifi almost everywhere on campus. I am from rural Wisconsin, where Verizon and US Cellular are the only viable carriers.
Two questions.
So people have gotten this to install?
Is it easy to switch back to Tweaked after installing this?
Sent from my SCH-I510 using Xparent Red Tapatalk 2
Check my edit. It installed just fine. Still not optimized, but it's a VERY functional build.