Lost volume rocker - Desire HD Accessories

My volume rocker has been loose for afew months now and the other day it got lost somewhere in London so I'd like to know where the cheapest replacement is in the UK.
I'd also like to know how easy it is to replace the part.
Thanks ;D.

Same problem here lmao and from uk aswell
Sent from my Desire HD using xda premium

Same problem you gotta take the whole shell apart I hear to replace it seen em for sale somewhere pain in the bum to do apparently? I just got a program to change sound anwyay from drop down so all good and a bit more control

I had the same problem...
I took a small block of aluminium, some abrasive paper and formed with it an appropriate shape and put some black foil over it and voila a new volume rocker.
I attached a photo, where you can see it.
On the photo i looks maybe a little bit terrible, but in real it looks very good

bought a new DHD in september,,, everything was OK but VOL - button stopped working all of a sudden,,
lucky for me , the vol + is working,, to adjust sound , i use s/w , to get in bootloader etc, i have to use adb commands,,,!
i personall believe the DHD suffers from poor hardware QA, buttons esp

Hi Guys!
I´ve taken mine apart for different reasons. Actually it aint all that difficult.
There´s an instructive video on Youtube. Can´t post link right now.
As for the rocker you can get it here:
http://www.htcrepairparts.com/htc-desire-hd-c-129_694.html?language=en
I bought from these guys and was satisfied. Took about a fortnight to arrive in Greenland from Hong Kong. Dunno about the price though.
I´ve heard this was expensive, not that i´m complaining.
Apart from the video it´s important to have decent lighting and a brush to remove dust. Trust me - there´s gonna be a lot of dust/dirt. For me the difficult part was getting the flash cover/gps antenna back again without breaking anything.
Regards
ELO

(www)parts4repair.com/products/HTC-Desire-HD-Volume-Button.html

Tried speaking to HTC clearly its a design problem with the handset. Maybe they would fix it for you under warranty.

I just ordered mine in ebay for a fiver from hongkong
Sent from my Desire HD using xda premium

Related

O2 XA Mini Housing/Fascia

Hey guys. I just got this second hand O2 XDA Mini a few weeks ago and I was challenged to bring it back to it's former glory. It as pretty run down but still in good working order so I decided to do a complete make over.
First, I went about flashing the ROM to the Latest Big Storage ROM which really helped me cram all my necessary apps. Second, I started looking for a replacement fascia/housing to give the Mini a fresh new look. I decided not to go with the Original fascia/housing because it was too expensive. Instead, I got this OEM (non-original) replacement fascia which came in a variety of colors. For my Mini, I decided to go with black. The keypad itself was black which made it unique.
I then went about the challenging and harrowing task of disassembly. After a couple of hours and many sweaty hand wipes later, I managed to put the new fascia together with nary a problem. I put my "new" Mini in a crystal case in order to protect it from scratches and voila... My own O2 XDA Mini Black Edition! Even blacker than the oiginal Black Edition.
Check out the pics...
Do tell about your own expereinces (and pictures) of your forays into customization.
HEY KABAYAN!!! that's awesome!, where did you bought the housing? at bidshot or in greenhills?, i've saw one in BIDSHOT and he's seeling it for 1k,how much did you bought yours?, i want to change my casing too,so that i can keep the original black housing.m using a hardcase and it's to bulky to use(MAS MAGANDA KCNG GMITIN AND MINI PAG WLANG CASE).
Hope to hear from you soooonnn!!!!
Looking great bro..how much did the Housing cost ya??
All in all a great job-10/10
I got it in Greenhills for about 800 but I'm sure you could get it for 700 if you look hard enough. I've decided to put a membrane at the d-pad opening to protect the d-pad since i know this will fade from constant contact with my thumb. It's a really good idea if you want to do what I did. Now my Mini is completely made over and protected.
I'm glad you guys liked the job. I'm really happy wih it too.
ooo...hello KABAYAN!! ahah, i remember those places...ahh home...
i so envy you at the moment. I want that clear case and that cover!
the clear case i got is different and scratches my fone.
ima gonna ask my cuzes over there to get me one...
CAn i ask something? what material is the non original case made out of?
is it the same as the original one? which is some sort of metal... i love that metal feel on my magician...
whitemoo..
You know, the feel of the housings are actually quite similar to the original. The fit is also plush.
well...thanks for that, i decided to order the silver original and the gray casings, costing me over $100 aud, argh overpriced shipping...
also picked up the same clear case that only half opens...
cant wait till they get here!.
Thanks for the info,
Whitemoo
did the same thing for my 2nd hand mini.
If there is a crystal clear housing, that would be very cool. It would look like a swatch watch
xda mini housing
who are bigshot and greenhills?? are they in us or worldwide? do they ship to the uk/ also l have a tmobile uk compact/ magicianand the screen broke after i dropped it. i got ot repaired using a blocked compact2/charmer. ever since the send, end, calender, contacts and centre buttons dont work. the send button ends the call and the others do nothing at all. could anyone help?
you can buy em off ebay. I ordered mine the other day. Comes to about 30 quid including postage for the keypad and the case.
I think these are going to be genuine ones left over from when they were making the xda mini so are probably genuine. Will be comparing my old facia with the new one carefully when they arrive and will report back wheather i think they are copys or not
I was once in Greenhills (Vira Mall). It is a shopping mall in the Philippines and there's an area with retail stores (mostly run by Chinese) dedicated for all type of phones. They do repairs, unlocking, conversions, and sell all sorts of accesories. Prices are quite cheap (in comparison to US and European prices) but most accessories are coming from China and are of very poor quality according to our standards. I didn't buy anything because of the quality of products. I've never been to BigShot but I guess it's something similar.
I'm wondering if you can show a fellow pinoy how to disassemble my mini. And while were on the subject, do you know where or how I can replace or improve the speaker on my phone. My phone sounds distorted when it's turned up. salamat pare ko!
I'm not a Filipino. but I was there many times for business trips and in one of those trips I was in Greenhills.
I already dismantled my unit once. What I'll do is take pics while dismantling it when my facia arrives, hopefully in a week. It's hard to explain by words only. So, stay tuned.
disassemble
@rdgzmn4xdadevelopers: I found this one some time ago on the forum. Can't remember the post, but I'm sure you like it BTW how did you come up with your nickname?
Cheers, M
EDIT Replaced the file with the uncorrupted rar
Thanks OLTP but it seems that the ZIP file is corrupted.
you're right & on my device too I'm searching for the post now.
Excuse me for the inconvenience, M
No problem. I just got a notice from the post office, hopefully it's the fascia I ordered.
Well I found it back, of course http://forum.xda-developers.com/viewtopic.php?t=39489&highlight=magician+apart
& that thread links to another useful one.
Succes in the refurbishmentbusiness, M
Your da man :lol:
I'm just getting it very hot with these compliments.
It's just that I can't take it when I can't find something back.

How firm is your slide mechanism?

As per the title.
How firm are your slide mechanism? When holding the device in your right hand (fingertips along left edge of device), does the device give a little as you change your grip/pressure (for example, as if you're manipulating the volume keys?).
EDIT:
As an aside, those buttons would have been better off on the "base" (keyboard section edge) of the device rather than on the screen section, that way when pressing them they wouldnt have caused this slight give in the slide mechanism!! Jesus, HTC need to employ some of us from here!!
A 100 views and no comments? Someone surely must have something to say about thi...
I would guess that many people are looking forward/waiting for this phone and want to read other people's thoughts but not enough people have one yet! You lucky soul!
SoundWave2003 said:
I would guess that many people are looking forward/waiting for this phone and want to read other people's thoughts but not enough people have one yet! You lucky soul!
Click to expand...
Click to collapse
Good point, but a few guys do. Black with his AT&T one, few others etc. Just looking for some opinions. Personally, I think the spring could be a little more resistive.
I got mine today finally from Clove, lucky enough was in the first shipment have been setting it up for the last couple of hours and the keyboard is fine.
Slight Keyboard give
I would agree with you to a point, Syphon Filter.
When looking at the screen, it seems that the palm of my hand is catching the bottom right edge of the keyboard in its closed position and 'twisting' it a little when the volume is adjusted.
However, I've found that the volume buttons are in the right place when using them incall.
(The actual sliding mechanisim feels pretty solid to me.)
There's a little give, not so much a shift but more of a flex, definitely feels good for a sideways slider.
thebiscuitboy said:
I got mine today finally from Clove, lucky enough was in the first shipment have been setting it up for the last couple of hours and the keyboard is fine.
Click to expand...
Click to collapse
Are you in the USA hebiscuitboy? If so what did clove charge for shipping to the U.S and how did you workout the exchange when you paid for it?
Thanks..
CalifornIyay said:
Are you in the USA hebiscuitboy? If so what did clove charge for shipping to the U.S and how did you workout the exchange when you paid for it?
Thanks..
Click to expand...
Click to collapse
I guess it's 28 pounds delivery with DHL and 20 the old fashion way. At least when ordered from here in Finland. Didn't dare to accept the order yet.
Virtually no give in mine at all, feels solid.
Mine is solid and has been "thoroughly" used and handed around for wow factor for the past few days. It is well built and better, if I remember correctly, than the O2 XDA IIs (Blue Angel) for it's keyboard sturdiness mechanism.
CalifornIyay said:
Are you in the USA hebiscuitboy? If so what did clove charge for shipping to the U.S and how did you workout the exchange when you paid for it?
Thanks..
Click to expand...
Click to collapse
Hi I'm based in the UK sorry
Appears firm to me, there's a little scraping noise as the keyboard is opened but not on close. Haven't been able to pin down where it's coming from yet.
mike_m said:
Appears firm to me, there's a little scraping noise as the keyboard is opened but not on close. Haven't been able to pin down where it's coming from yet.
Click to expand...
Click to collapse
I there's a little slidey thing that covers the ribbon cable. As you open/close that it moves. That's what is causing the noise your just described.
Fine. Another slight improvement from HTC's latest slider, in my opinion...
Totally agree with the comment about the volume buttons, too. Bit daft putting them somewhere where the act of pressing them means you're also opening up the keyboard...
sub69 said:
Fine. Another slight improvement from HTC's latest slider, in my opinion...
Totally agree with the comment about the volume buttons, too. Bit daft putting them somewhere where the act of pressing them means you're also opening up the keyboard...
Click to expand...
Click to collapse
Yeah they should have just moved then onto the bottom half of the slide!
So when you press your volume buttons (just enough to make them "press") does your slide move at all?
Mine does a tiny bit. if the spring was a little stiffer it would be spot on.
What about the power button when trying to remove the back?
I keep turning it back on when I want it to be switched off and remove the battery! Just something I will have to get used to no doubt!
After receiving my Fuze/Rap today, I also noticed a 1/32 inch twist when opening the phone. My only only other HTC slide experience is the 8125 which after 4 years has a more tight opening action.
I have to have faith in the Raph after all the faithful years with my other slide out.
US- Virginia Beach
it sounds like something comes loose when i slide my fuze open. then there is something that rattles around in it. i tried to return it but all the fuzes they had at the store made the same sound. unique?
Mine is a little loose as well - I wondered if anyone else had the same issue. I can (with very little effort) make the screen move about 2-3mm away from the keyboard. It does feel a lot more loose than the 8525 did to me.. I'm not sure how that will play out over the lifetime of the phone, but I can expect it to only get worse (hopefully not!)
Love the phone though in general.

[Q] My volume rocker fell out!

I had my cracked screen replaced not too long ago from a guy online and he did a great job of it. Problem is my volume rocker fell out. He said he'd fix it, but I'd have to be without my phone for quite a while and that's a drag. It's also been a while since this happened and I'm afraid too much time has now passed to send it in.
Nothing appears to be broken on either the phone or the volume rocker, so I'm wondering if there is a relatively simple fix for this. Obviously I could just glue it, but I don't want to do that in case I break my screen again (you never know...).
Anyone have any ideas?
got any pictures?
Not terribly uncommon. If you bought it from a tmo store just call and see if they have a case to swap.
jayzusfk said:
Not terribly uncommon. If you bought it from a tmo store just call and see if they have a case to swap.
Click to expand...
Click to collapse
Well, I think it's well past the warranty. Think they would still go for it?
nonione said:
got any pictures?
Click to expand...
Click to collapse
I could give it a shot if you think it would help
JazzMac251 said:
Well, I think it's well past the warranty. Think they would still go for it?
I could give it a shot if you think it would help
Click to expand...
Click to collapse
I don't think it can be out of warranty. It hasn't even been a year since it was released.
Sent from my HTC Sensation 4G using xda premium
I think the warranty only lasts a month or so. It's been a lot longer than that.
JazzMac251 said:
I think the warranty only lasts a month or so. It's been a lot longer than that.
Click to expand...
Click to collapse
It has a one year warranty. I bought mine on Craiglist, the volume rocker fell out, I called HTC and got it replaced through the warranty department.
Sent from my HTC Sensation 4G using xda premium
oh, nice! So I should make it an HTC thing and not a TMO thing?
My volume rocker fell out about a month after I got this phone. I was playing angry birds and it just came out. I called HTC and they sent me a replacement back cover. Been using the new back now for a bit over a month and so far so good. Now if I can only figure out how to fix the power button issue of double clicking on occasion to wake the phone up and turn it off after the 2.3.4 update......
JazzMac251 said:
oh, nice! So I should make it an HTC thing and not a TMO thing?
Click to expand...
Click to collapse
Right, HTC would be the ones to hit up for a new back cover...they are really good about that stuff too ( i had problems with my MT4G memory card and had to call them). Tmobile does not have them, that's why warranty phones don't ever come with a back cover or battery
Sent from my HTC Sensation XE using xda premium
The volume rocker button is a known issue with HTC. I called today and gave me the number 1-888-356-2375 to replace the back cover. It is covered under HTC 1year warranty.
Mine fell out today.
Along with the 'stuck pixels' and crappy battery life, I cant wait to upgrade. It's too bad because i really like the phone overall.
It's not part of t-mobile's warranty (just the main device is) but if the store has any returned they can trade you. Otherwise, yeah, HTC will send you one if you don't mind the wait.
They're also supposed to be releasing a software update for the power-button issues.
Mine fell out as well today. I was going to ask if instead of sending me the black and grey housing, if I can get the aluminum one. Or aluminum "looking" one. I will post my results!
I also recently heard of a battery upgrade? instead of the original 1520 mah there is now the 1950 mah? Maybe with a little kicking and screaming about the volume rocker falling out and me having to have the new housing re-ghost armored + crappy battery life "even with custom rom and kernel" 6-7 hours if im lucky, they can throw it in. I do have a gift when it comes to being a barterer :-D
My volume rocker just fell out today! So I will be contacting HTC soon!!

Does your 8X body creak/snap? See light where screen meets body/screen not flush?

Im wondering if other people's 8X's creak when squeezing the phone sideways or on the screen after a few minutes of use? Also I can see light leaking from the bottom where the screen meets the body of the phone. Want to know if I should get an exchange tomorrow at Microsoft Store since after that I'm pretty far from any Microsoft Stores until I'm past the return date.
My volume rocker squeaks a little and also moves back and fourth when I shake the phone. At the bottom of the phone on either side of the charging port there are light leaks, and on the left and right bottom sides too, which is annoying in the dark. Tempted to take mine back to Phones4u and ask for a new one..
Got a new phone and its much better. I didn't notice if light leaks through bottom anymore, but the screen is definitely more flush though not PERFECTLY flush.
Much more solid phone and power button also has a click and is easier to press now. No more creaks now.
Sent from my 8X using Board Express
I'll go and exchange mine then I think. Can you take a picture of it in the dark to show if you have any light leaks and post it up? I'd be very appreciative.
My power button feels a bit odd too, it doesn't have a click and feels squidgy, was thinking that earlier. Might have a go on the replacement in store and look at it in the dark to check for light leaks.
Edit: I've attached the best picture I could get of my light leaks/screen fitting. This is with brightness at max, taken with my DSLR. Was yours this bad? I'd be interested to see if this is an issue with other 8X's or just ours.
I haven't had any problems like that with mine yet. I started using a case after the first week though. Hopefully a replacement will fix the issue for you. That's a lot of light coming through.
Sent from my HTC 8x using Board Express
It is, it's awful. I'm kind of regretting getting the 8X over the 920 to be honest, the blacks seem very light on the screen and the colour seem very washed out (maybe it's just coming from an AMOLED screen that is doing it), might see what they can do for me in store today. We'll see.
Took it back today, they didn't want to replace it but they did in the end. Tried out two brand new Yellow ones in store, both had the exact same issue. Tried a black one, and it's perfect, no light leakage at all. Maybe it's an issue with the Yellow one. Poor effort HTC.
Accepted the Black one as a replacement, but I'm trying to sell it and get a 920 like I should have in the beginning. Doh!
SmokinWaffle said:
Took it back today, they didn't want to replace it but they did in the end. Tried out two brand new Yellow ones in store, both had the exact same issue. Tried a black one, and it's perfect, no light leakage at all. Maybe it's an issue with the Yellow one. Poor effort HTC.
Accepted the Black one as a replacement, but I'm trying to sell it and get a 920 like I should have in the beginning. Doh!
Click to expand...
Click to collapse
Meh. I have the black one and its an issue all right. Yesterday, my screen totally died. Went to HTC service center today, and the light leakage and inperfect screen flush were listed as "possible user damage". If they decide to classify it as user damage, i'll be pissed.
matthew5025 said:
Meh. I have the black one and its an issue all right. Yesterday, my screen totally died. Went to HTC service center today, and the light leakage and inperfect screen flush were listed as "possible user damage". If they decide to classify it as user damage, i'll be pissed.
Click to expand...
Click to collapse
I went with the 920, had screen flickering issues and random rebooting on it, and all 3 of my replacements. Gave up and got a Note II. lol.
Yes, when I had mine it creaked and the camera lens moved around a little, and the screen was a tad squishy on the bottom right...HTC consistently has awesome designs but
There is always something wrong with their build quality that is maddening.
Sent from my DROID RAZR HD using xda app-developers app
Crack over Speaker holes
Hi guys, just to add to the build quality problems... I've just had a replacement from Phones4U of my yellow 8X. After just under a month of gentle and careful ownership i noticed a crack appeared over (and through) the holes on the back for the speaker. The crack got bigger over about a week before i had chance to go ask about it in store. to be fair to P4U, the person i spoke to was great and they swapped it out in store, even though i'd originally bought it online.
Came back to this thread to mention it and now having read everything else i'm noticing a bit of creaking when i squeeze the sides and both phones had had the squishy screen edge picture thing which i first read about being a problem on the ONE X. Not sure if that's just normal anyway though really. Oh and neither of my power buttons have clicked and i find myself missing my easy to press home button on my old iPhone 3GS!
Same again!
natstally said:
Hi guys, just to add to the build quality problems... I've just had a replacement from Phones4U of my yellow 8X. After just under a month of gentle and careful ownership i noticed a crack appeared over (and through) the holes on the back for the speaker. The crack got bigger over about a week before i had chance to go ask about it in store. to be fair to P4U, the person i spoke to was great and they swapped it out in store, even though i'd originally bought it online.
Came back to this thread to mention it and now having read everything else i'm noticing a bit of creaking when i squeeze the sides and both phones had had the squishy screen edge picture thing which i first read about being a problem on the ONE X. Not sure if that's just normal anyway though really. Oh and neither of my power buttons have clicked and i find myself missing my easy to press home button on my old iPhone 3GS!
Click to expand...
Click to collapse
Well after a month (again) my replacement 8X has developed the crack in the same place.
Phones 4U are gonna swap it for a black model this time, i'm wondering if it's the yellow plastic specifically that's bad. They were less cheery and helpful with the exchange this time stating that because it's a cosmetic fault they don't usually replace them and the first time was 'a goodwill gesture'.
I'm starting to wish i'd just gone for the extra price bump for the Lumia 920 instead now. Guess i'm lucky they've replaced them at all though but i still don't think a phone should crack of it's own free will after 4 weeks! http://forum.xda-developers.com/images/icons/advanced/drive.png
They also said it's not a widespread fault that they've been made aware of, i was actually hoping someone else on here would have had the same experience to help me confirm it wasn't just bad luck or whatever. I guess everyone else just has the corners rubbing off instead!
I guess I got lucky, my blue 8X seems pretty solid and all the buttons are clicky.

Desire HD faulty could I sell

Hey Guys,
Have a htc desire HD had it for the last years and I cracked the screen on it 2 weeks ago I got a replacement. Screen installed it also got the new high charge battery which I havint opened and new battery door,
Any way ill give what's wrong with it but my misses ended up getting me the THL 100s as I been talking about getting it so looking to see if I can get some cash back on the desire even if it ain't much,
I was lazy putting it back together and lost about 5 screws, one at the battery door which stops it from closing fully still does, the glass intfront of the camera is cracked though unnoticeable from pictures, 2 things that don't work but ill open it and have em working is the volume key and in call speaker, and on the new digitizer screen the very top don't seem to work ie I can't pull down the menu not sure if this is fixable,
So ya just looking for an idea how much if even I could sell it for,
Thanks guys
Ru
Sent from my Desire HD using xda app-developers app
use Swappa to guide you.

Categories

Resources