Was using netarchy 1.4.0, saw there was an update, and updated. Now my nexus s 4g won't even get past the google screen....advice/help appretiated.
Flash previous kernel you had or any other one. Or restore a backup
lol....right. thx man
So what made you post a new thread instead of asking this in the netarchy thread?
Sent from my Nexus S 4G using xda premium
Pretty sure he couldn't post in the netarchy thread. I don't think I could post in the Nexus S Dev board until I hit ten posts...
I had the same problem, I fixed it by wiping cache and dalvik-cache after flashing the kernel.
trkn1 said:
I had the same problem, I fixed it by wiping cache and dalvik-cache after flashing the kernel.
Click to expand...
Click to collapse
can i use this kernel to KelLMSKing MIUI Mod 2.3.2 sory for my bad english
joseph LR said:
can i use this kernel to KelLMSKing MIUI Mod 2.3.2 sory for my bad english
Click to expand...
Click to collapse
I don't know, but on the netarchy thread I see that the kernel supports ROMs with a version of gingerbread 2.3.4 or higher.
Related
I'll be honest, I'm not sure if it's the kernel or cm7, but the bottom line is that adding superclock 4×2 results in super laggy adw ex. I wish I would have added it prior to flashing the kernel, but who would've imagined that a widget would cause a collapse like this. Additionally, the unlock animations do not work. Fyi.
Feel free to chime in.
Your using a eclair kernel (2.1) for cm7?
Sent from my PC36100 using XDA App
wheres the download link? after all this is a DEV right??
asafegous said:
Your using a eclair kernel (2.1) for cm7?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Savaged Zen is a gb kernel dude
cordell12 said:
wheres the download link? after all this is a DEV right??
Click to expand...
Click to collapse
Download link to what? I can certainly load up catlog and post the output.
cordell12 said:
wheres the download link? after all this is a DEV right??
Click to expand...
Click to collapse
They are saying since you posted this in the dev section, they want to download whatever you are dev...
That said I run sz 2.1 on cm 7 with adw ex and have zero issues with bw.
Sent from my EVO
bwcorvus said:
They are saying since you posted this in the dev section, they want to download whatever you are dev...
That said I run sz 2.1 on cm 7 with adw ex and have zero issues with bw.
Sent from my EVO
Click to expand...
Click to collapse
What version of BW and are you using the unlock animations?
Also, I'm using the nosbc CFS more havs that wasn't done by mwielgosz
lawsonmh15 said:
What version of BW and are you using the unlock animations?
Also, I'm using the nosbc CFS more havs that wasn't done by mwielgosz
Click to expand...
Click to collapse
Bw 3.4...no unlock...and the official bfs SBC version. Maybe try the nosbc that mw does??
Sent from my Xoom using Tapatalk
Here is the discussion on that kernel where you can post your Question. They also have official forums which you ask Questions if you think the kernel is the issue.
http://forum.xda-developers.com/showthread.php?t=917755
Here is the CM7 discussion. Post here too, maybe it's CM7 related like you think it might be.
http://forum.xda-developers.com/showthread.php?t=956187
The point that people are making is that this is Android Development. Not Q&A. The Evo forums also have dedicated Q&A sections.
As to your problem, flash a different kernel? Or wipe /system and /boot and reflash CM7 + GApps to get CM7 stock kernel back and a clean CM7 install while preserving /data (as in, don't wipe data).
Edit: To the guy thinking this is Eclair kernel... the kernel version is 0.2.1. For some reason people like to call it 2.1. It's a 2.6.37 based Gingerbread kernel.
sirmx said:
Here is the discussion on that kernel where you can post your Question. They also have official forums which you ask Questions if you think the kernel is the issue.
http://forum.xda-developers.com/showthread.php?t=917755
Here is the CM7 discussion. Post here too, maybe it's CM7 related like you think it might be.
http://forum.xda-developers.com/showthread.php?t=956187
The point that people are making is that this is Android Development. Not Q&A. The Evo forums also have dedicated Q&A sections.
As to your problem, flash a different kernel? Or wipe /system and /boot and reflash CM7 + GApps to get CM7 stock kernel back and a clean CM7 install while preserving /data (as in, don't wipe data).
Edit: To the guy thinking this is Eclair kernel... the kernel version is 0.2.1. For some reason people like to call it 2.1. It's a 2.6.37 based Gingerbread kernel.
Click to expand...
Click to collapse
I can appreciate that, and I suppose I should've posted in the nosbc SZ thread. Sorry about that.
Hi,
i just got rooted my g2x 2.3.3 (stock rom), can anybody help me how to overclock it??
Thanks
You need to flash a kernel that supports overclocking. Check over in the development section for one that's compatible with your rom.
yogieajuz said:
Hi,
i just got rooted my g2x 2.3.3 (stock rom), can anybody help me how to overclock it??
Thanks
Click to expand...
Click to collapse
Use http://forum.xda-developers.com/showthread.php?t=1102720
I used it when I was stock rooted GB and it works great!!!
hope this helps and good luck!!
MisfitX said:
Use http://forum.xda-developers.com/showthread.php?t=1102720
I used it when I was stock rooted GB and it works great!!!
hope this helps and good luck!!
Click to expand...
Click to collapse
sorry,
what about after flash new kernel then not working, how i back to the original one?
thanks
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
phburks said:
You need to flash a kernel that supports overclocking. Check over in the development section for one that's compatible with your rom.
Click to expand...
Click to collapse
i have stock room and i rooted from your link before.
thanks
yogieajuz said:
sorry,
what about after flash new kernel then not working, how i back to the original one?
thanks
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
i have stock room and i rooted from your link before.
thanks
Click to expand...
Click to collapse
After you flashed the new kernel you have to use something like SetCPU (from the market) to set the processor speed higher. You can set it up to the maximum speed allowed by the kernel you flashed. Just be careful about running it at max speed for too long. This phone is plenty fast at 1GHz so no need to set it too high and risk damaging your phone.
Sent from my LG-P999 using XDA App
phburks said:
After you flashed the new kernel you have to use something like SetCPU (from the market) to set the processor speed higher. You can set it up to the maximum speed allowed by the kernel you flashed. Just be careful about running it at max speed for too long. This phone is plenty fast at 1GHz so no need to set it too high and risk damaging your phone.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I'm only running mine at 1.2GHz and it performs fantastic..
Sent from my LG-P999 using xda premium
MisfitX said:
I'm only running mine at 1.2GHz and it performs fantastic..
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
@MisfitX:
Can you give me link (file), which one i have to use, my phone is:
OS: 2.3.3 (Rooted) Stock Rom
Baseband v :xxxx [JUL 152011]
Kernel: 2.6.32.9
Soft Ver.: LG-P999-V21e
Thanks
i appreciated...
yogieajuz said:
@MisfitX:
Can you give me link (file), which one i have to use, my phone is:
OS: 2.3.3 (Rooted) Stock Rom
Baseband v :xxxx [JUL 152011]
Kernel: 2.6.32.9
Soft Ver.: LG-P999-V21e
Thanks
i appreciated...
Click to expand...
Click to collapse
http://www.multiupload.com/KFCY74Q85M
That's faux123's 0.1.3 kernel for stock GB roms, works great!!
Thanks faux123
And good luck, hope it helps...
Sent from my LG-P999 using xda premium
MisfitX said:
http://www.multiupload.com/KFCY74Q85M
That's faux123's 0.1.3 kernel for stock GB roms, works great!!
Thanks faux123
And good luck, hope it helps...
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
@MisfitX,
how if i want to back to original like before i flash this kernel, what i have to do like uninstall this kernel maybe?
Sorry, i'm new on this.
Thanks
Has anyone posted a flashable zip for the stock GB kernel so if you try this and don't like it you can go back to stock easily? I have searched and cannot find it.
yogieajuz said:
@MisfitX,
how if i want to back to original like before i flash this kernel, what i have to do like uninstall this kernel maybe?
Sorry, i'm new on this.
Thanks
Click to expand...
Click to collapse
The best way would be to make a backup first, then follow the steps to flash the new kernel.. That way if you don't like it or if you have a problem you can always reboot into recovery and restore that backup..
Side note: its always a good idea when flashing anything to your phone to have a back up plan. Like what you will do if something has a problem or you don't like it.. Backup, backup, backup..
Good luck hope this helps
Sent from my LG-P999 using xda premium
Gotcha.....
Sent from my LG-P999 using XDA Premium App
I tried this but it didn't seem to work. I saw the new kernel version in settings, and in SetCPU it showed 1100 as the speed, but when I went to adjust the slider it maxed out at 1000, not 1500. Did I do something wrong?
When in set cpu ; settings; detect new frequencies. Then try it.
Sent from the fastest g2x in the world
Edit: nevermind, I needed to autodetect after installing kernel. Thank you so much.
Can someone help on how to restore a kernel. Kernel was from cm7 nightly 147 stock , try to install T15 kernel but stock on boot lop, so i wanted to restore the stock cm7 kernel without having to restore the entire rom, i did have nandroid back up . Thanks in advance . I dunno why i did it ( my dmb @ss noob brain , i guess t15 kernel is not compatible with cm7 nightly)
Sent from my LG-P999 using XDA App
I believe the only way to do it is to re-flash the ROM. And T15 is compatible with Cm7...im using it with MIUI which is CM based.
or try re-flashing T15 again:
Wipe cache and Dalvik and you should be good.
Try flashing the same rom, just wipe cache and dalvik cache and flash. You flashed the old morfic kernel, there is a new one in his thread towards the end of the thread, i think he didn't update the op.
Go here and get the newest one for g2x
www.derkernel.com/
babymatteo said:
I believe the only way to do it is to re-flash the ROM. And T15 is compatible with Cm7...im using it with MIUI which is CM based.
or try re-flashing T15 again:
Wipe cache and Dalvik and you should be good.
Click to expand...
Click to collapse
It's my brothers g2x and he just want the older kernel so i end up restoring the rom which is just not bad cause i did the back up few days ago. Thanks for the info though , now i knw it's compatible with cm7 .
Sent from my LG-P999 using XDA App
fcisco13 said:
Try flashing the same rom, just wipe cache and dalvik cache and flash. You flashed the old morfic kernel, there is a new one in his thread towards the end of the thread, i think he didn't update the op.
Go here and get the newest one for g2x
www.derkernel.com/
Click to expand...
Click to collapse
The new version of this kernel does it have the planet earth bootanimation thats electrfied? Or they all have the same boot animation . Cause that's were i dwnloaded t15 kernel( same site u gave me ) i think i downloaded it 7 days ago.
Sent from my LG-P999 using XDA App
No its not the green planet one, the new one has blue letters.
fcisco13 said:
No its not the green planet one, the new one has blue letters.
Click to expand...
Click to collapse
Thanks , i'll download the new version.
Sent from my LG-P999 using XDA App
i have updated miui to 10.** from 9.** nadroid i had faux kernel on old build i refuse to use
titanium back up here is my question 10.4 then did not have faux ker just cm7 what exactly happned
jbdaka6445 said:
i have updated miui to 10.** from 9.** nadroid i had faux kernel on old build i refuse to use
titanium back up here is my question 10.4 then did not have faux ker just cm7 what exactly happned
Click to expand...
Click to collapse
Because miui uses cm7 kernel.
... post count...
Sent from my Calculator with Android.
You have to flash the kernel again, custom kernels don't carry over. Just reflash the kernel and you'll be fine.
Sent from my LG-P999 using xda premium
I just got the Captivate yesterday and I'm in love with it. I've been modding my Backflip for a while and I'm fairly certain I know what I'm doing. I've been trying different ROMs and I've currently settled on a rooted stock 2.2 ROM.
I want to change my kernel though, so I put my phone in download mode and flashed the Galaxian kernel via Odin, it finished and then my phone started boot looping. So I one clicked it and tried again with SGS flasher, boot loop. One click restored, tried with CWM, boot loop.
I've also tried Talon, Speedmod, Setiron and a stock kernel with all 3 methods. Nothing will flash without boot looping.
That kernel is designed for reoriented i-9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
What about all of the other ones that were supposedly for 2.2 ROMs?
AbaddonVH said:
What about all of the other ones that were supposedly for 2.2 ROMs?
Click to expand...
Click to collapse
It needs to be a true captivate 2.2 kernel a lot are i9000's you just need to read the op for whichever kernel you are looking at thoroughly. 90% of the time the dev states if its an i9000 kernel.
The speed mod kernel here, forum.xda-developers.com/showthread.php?t=893880 SHOULD work just make sure to wipe cache and dalvik cache in recovery after install and it should boot.
Sent from my I897 w/Antares Darkcloud, Red Nebula kernel, & 1.3Ghz OC using Tegrak.
You will have to read the description in the first post on the kernel you want to install, and the kernel you were installing was a gingerbread kernel
Sent from my SAMSUNG-SGH-I897 using XDA App
holeindalip said:
You will have to read the description in the first post on the kernel you want to install, and the kernel you were installing was a gingerbread kernel
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yeah. You were trying to install a gingerbread kernel on a froyo ROM. That won't work.
Thanks guys! I think I downloaded the wrong version of SpeedMod the first time, it worked this time. Firstly I didn't know that the difference between i-9000 and i897 meant that much. Secondly, I'm not really sure how to read the kernel topics, they're confusing to say the least :S.
I'll learn sooner or later but thanks for your help everyone.
AbaddonVH said:
Thanks guys! I think I downloaded the wrong version of SpeedMod the first time, it worked this time. Firstly I didn't know that the difference between i-9000 and i897 meant that much. Secondly, I'm not really sure how to read the kernel topics, they're confusing to say the least :S.
I'll learn sooner or later but thanks for your help everyone.
Click to expand...
Click to collapse
Yeah some are very confusing the biggest help Is to learn the difference in firmware revision codes. Most captivate roms/kernels begin with k. like kh3, kf1 that sort of thing and from what I remember j is for I9000 eg jv1 etc...
Sent from my I897 w/Antares Darkcloud, Red Nebula kernel, & 1.3Ghz OC using Tegrak.