i have updated miui to 10.** from 9.** nadroid i had faux kernel on old build i refuse to use
titanium back up here is my question 10.4 then did not have faux ker just cm7 what exactly happned
jbdaka6445 said:
i have updated miui to 10.** from 9.** nadroid i had faux kernel on old build i refuse to use
titanium back up here is my question 10.4 then did not have faux ker just cm7 what exactly happned
Click to expand...
Click to collapse
Because miui uses cm7 kernel.
... post count...
Sent from my Calculator with Android.
You have to flash the kernel again, custom kernels don't carry over. Just reflash the kernel and you'll be fine.
Sent from my LG-P999 using xda premium
Related
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
boredomkillz said:
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
Click to expand...
Click to collapse
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
treUse said:
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
boredomkillz said:
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
Click to expand...
Click to collapse
it should work on any 2.3.4 cm based roms.
I'm trying to find out the best way to install a new rom & kernel.
Should you update kernel first then rom? or rom first then kernel?
Always rom first then kernel.
Sent from my LG-P999 using xda premium
Thanks for the info...
any particular reason why?
Because when you flash a rom it contains a kernel that will erase any kernel you flash before hand. So say your wanting to flash morfics trinity kernel for cm7, you'd want to flash cm7 first then trinity kernel.
With the rom your using.... does your APN work?
I've tried the Power+ Volume UP and still no APN connection. My settings are there an selected but it doesn;t connect.
It should work, faux's rom are second to none imho.
But for right now i couldn't tell you since my baseband is unknown and gonna be sent back to LG.
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Its like that for all rom's and kernels for g2x.
Sent from my LG-P999 using xda premium
mightymike889 said:
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Click to expand...
Click to collapse
Because the default governors of stock kernels are already very good.
Sent from my Calculator with Android.
jose makalolot said:
Because the default governors of stock kernels are already very good.
I wish i could say thats true butninhave to chargebmybfone 2-3 times a day!!
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Sent from my LG-V909 using XDA App
for the longest time I have tried to OC my g2x without any luck. Probably the reason why it never OC was because I ran on the Cm7 generation roms. But because there was a recent update (cm7.2) I'm wondering if someone has figured out how to overclock with this rom.
Current phone stats:
Kernal: 2.6.32.55-cyanogenmod [email protected]
Rom: cyanogenmod 7.2.0 RC1 p999
Perhaps I can flash a new kernal that you guys can recommend and OC my phone.
vexatiousguy said:
for the longest time I have tried to OC my g2x without any luck. Probably the reason why it never OC was because I ran on the Cm7 generation roms. But because there was a recent update (cm7.2) I'm wondering if someone has figured out how to overclock with this rom.
Current phone stats:
Kernal: 2.6.32.55-cyanogenmod [email protected]
Rom: cyanogenmod 7.2.0 RC1 p999
Perhaps I can flash a new kernal that you guys can recommend and OC my phone.
Click to expand...
Click to collapse
Flash faux kernel. Oct through cm settings
Sent from my LG-P999 using XDA
Sorry to bother but do you mind linking me to his cyanogenmod Oc kernal page? He has so mamany I can't seem to find it
http://forum.xda-developers.com/showthread.php?t=1073626
Hit thanks
Sent from my LG-P999 using XDA
I can't seem to download Faux kernal nor Dragon, there files are missing? Is there any other kernels best stable with Weapon ROM?
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
New2my8125 said:
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
Click to expand...
Click to collapse
Well I read other people's combination and they had Weapon with Faux kernel but the dl link for Faux doesn't work. (Gingerbread)
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
justjackyl said:
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Click to expand...
Click to collapse
Yes, please! And would you recommend faux kernel or trinity kernel?
Steeez said:
Yes, please! And would you recommend faux kernel or trinity kernel?
Click to expand...
Click to collapse
I've always used faux with stock ROMs.
I may be wrong, but I thought Trinity was for CM7 ROMs. I used it with the CM7 Nightly Build 135.1, worked great. But as for stock, I've always used the 2 faux kernels I've uploaded.
This is the latest faux GB kernel:
P999-GB-Kernel-014b2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-014b2-ext4
If you have any issues, which I haven't had any thus far and been on my current setup for almost two weeks, you can try this older version:
P999-GB-Kernel-013_r2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-013r2-ext4
I don't know your experience level with this stuff. You don't have to re-install the ROM when changing kernels. Just make sure you wipe/format "cache" and "dalvik cache". Let it boot up and don't do anything for ten minutes. Than reboot again and your good to go. This is how I have done it and I've rarely encountered any issues.
Let me know if this helps and I'll be around doing homework for my IT class, so feel free to post back or PM me directly.
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Steeez said:
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Click to expand...
Click to collapse
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
justjackyl said:
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
Click to expand...
Click to collapse
It's a long baseband lol My wifi isn't working.. :/
Steeez said:
It's a long baseband lol My wifi isn't working.. :/
Click to expand...
Click to collapse
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
justjackyl said:
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Click to expand...
Click to collapse
Well I restore my system so i'm good now, I'm trying faux older version. So do you want me to tell you my whole baseband?
I tried the older version and everything works for.
If you have no clicks in your call audio when not using wifi calling, your good.
So what rom n kernel did you go with? My setup is in my signature.
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
0b095 said:
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
Click to expand...
Click to collapse
Stick with CM7 ROMS or Rooted Mod Stock ROMs.
My favorite is BuROM Modded Stock with Faux Kernel 14_b2
OR
CM7 Nightly 135.1 with Faux Kernel 52
CM 7.2 Official with Faux 52
CM 7.2 Nightlies and Faux v52 LG Stock stable
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Temasek cm7 kang and faux stock right now pretty stable
Sent from my LG-P999 using xda premium
Cm7 nightly with trinity elp
Sent from my LG-P999 using Tapatalk
justjackyl said:
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Click to expand...
Click to collapse
lol cm7.2 + faux won the consensus congrats..
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
http://faux.androidro.ms/archive/
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
thx i installed cm-7-20120930-NIGHTLY-p999.zip that rom and ''[email protected]#49'' just want to learn is that kernel what we are talking about ? Is it the lastest one ?
52 is newest.
http://faux.androidro.ms/P999-CM-Kernel-052-sv-lg-stable.zip
Sent via G2x on CM7 b135.1 w/faux 52 kernel
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
getting back on topic...
another vote for trinity..
either CM 7.2 nightly + trinity elp or HFP 2.3 + trinity elp
Morfic's kernels work much better on my phone (LG-P999DW) + 21y baseband...
21e baseband *never* worked quite right for my phone, even on stock.
noahk423 said:
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
the LG means stock LG voltages and is unable to control undervolting. the other is for if you plan to undervolt with an app like SetCPU.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
Legit! It really means 'low grade'. Hahaha
Sent from my LG-P999 using xda app-developers app
can someone post a link for BuROM Modded Stock??
m0bstr said:
can someone post a link for BuROM Modded Stock??
Click to expand...
Click to collapse
http://www.igottadroid.com/ModMarket/Listings/buru8981661610.html