Database Info

how to install rom patches

installed a new rom to my hd2 now a patch is available. how do i install the patch please.

if the patch is... a cab just copy it to the phone and execute it...

dorlean said:
installed a new rom to my hd2 now a patch is available. how do i install the patch please.
Click to expand...
Click to collapse
Depends on format of patch. If its a cab, copy it on to your device and then click on it using your file explorer
If its a .exe you'll need to connect your device to your pc using usb cable and run it from your pc

A Little Help Please?
Fallen Spartan said:
Depends on format of patch. If its a cab, copy it on to your device and then click on it using your file explorer
If its a .exe you'll need to connect your device to your pc using usb cable and run it from your pc
Click to expand...
Click to collapse
Sorry, could you please post detailed instructions on how to do this i am 13 and have a pretty vast knowledge on how ROM's in devices work i just don't want to mess up my phone in the process I have an Droid DNA and the patch has been released in the form of a zip, containing files " META-INF" and "system" can i just replace the existing files in my ROM with these and re-flash it? Thanks in advance.

HTC DNA;Install46753843 said:
Sorry, could you please post detailed instructions on how to do this i am 13 and have a pretty vast knowledge on how ROM's in devices work i just don't want to mess up my phone in the process I have an Droid DNA and the patch has been released in the form of a zip, containing files " META-INF" and "system" can i just replace the existing files in my ROM with these and re-flash it? Thanks in advance.
Click to expand...
Click to collapse
It seems that it's a zip file.
Make sure you have installed cwm recovery
1. Boot your device into recovery mode (press volume up+power button+home button)
2.Use volume upon down keys to scroll and power button to select.
3. Now select install zip from sd card.
4. Select choose zip from SD card.
5. Now select the zip file (patch file)
6. Scroll down to yes and select yes.
7. The patch will start installing, wait for it to install.
8. You are done. Now just reboot your device.

Installing .zip patches
Aniket Gurav said:
It seems that it's a zip file.
Make sure you have installed cwm recovery
1. Boot your device into recovery mode (press volume up+power button+home button)
2.Use volume upon down keys to scroll and power button to select.
3. Now select install zip from sd card.
4. Select choose zip from SD card.
5. Now select the zip file (patch file)
6. Scroll down to yes and select yes.
7. The patch will start installing, wait for it to install.
8. You are done. Now just reboot your device.
Click to expand...
Click to collapse
Do I need to clear dalvik, or regular cache?

install patch, format is patch
how can i install these patchs :
https://gist.github.com/pawitp/88a1d4514a0734c866c7
my device is mega 5.8
and topic is : http://forum.xda-developers.com/gal...m-resurrection-remix-lollipop-v5-2-7-t2993621
thanks

[Q] How to Flash zip file??

Hey I have samsung galaxy 3 (GT- I5801),i'm facing problem while flashing a zip file coz right now i have official rom on my cell..and it doesn't have recovery option....i tried to convert zip file into tar file but couldn't do so....plzz help me..

trashwill said:
Hey I have samsung galaxy 3 (GT- I5801),i'm facing problem while flashing a zip file coz right now i have official rom on my cell..and it doesn't have recovery option....i tried to convert zip file into tar file but couldn't do so....plzz help me..
Click to expand...
Click to collapse
Put zip to root of sdcard and rename to update.zip
Then to recovery:
1) Turn your phone off
2) Press Vol+ Vol- then Home button then power off and hold them for 15 seconds
3) You is in recovery!
Then run "update.zip"(Up Down - volume, Home button - OK) or something like this. Your ROM will be flashed!

DoR2 said:
Put zip to root of sdcard and rename to update.zip
Then to recovery:
1) Turn your phone off
2) Press Vol+ Vol- then Home button then power off and hold them for 15 seconds
3) You is in recovery!
Then run "update.zip"(Up Down - volume, Home button - OK) or something like this. Your ROM will be flashed!
Click to expand...
Click to collapse
but i said i have official froyo rom and i dont have recovery option in this rom coz usually official roms doesn't have recovery option..,previously i used to do by same method as u told...but with this it goes to downloading mode....that means i need to flash it through odin on my laptop.. can't i convert this zip to tar???

DoR2 said:
Put zip to root of sdcard and rename to update.zip
Then to recovery:
1) Turn your phone off
2) Press Vol+ Vol- then Home button then power off and hold them for 15 seconds
3) You is in recovery!
Then run "update.zip"(Up Down - volume, Home button - OK) or something like this. Your ROM will be flashed!
Click to expand...
Click to collapse
by the way i did it..i just flashed a custom rom which had recovery option and as u said picked up the update.zip file n flashed..thanks..

Flash using CWM
trashwill said:
Hey I have samsung galaxy 3 (GT- I5801),i'm facing problem while flashing a zip file coz right now i have official rom on my cell..and it doesn't have recovery option....i tried to convert zip file into tar file but couldn't do so....plzz help me..
Click to expand...
Click to collapse
Put zip to root of sdcard and rename to update.zip
Then to recovery:
1) Turn your phone off
2) Press Vol+ Vol- then Home button then power off and hold them for 15 seconds
3) You is in recovery!
Then run "update.zip"(Up Down - volume, Home button - OK) or something like this. Your ROM will be flashed!.
Otherwise if you have CWM go to option install zip from sd and install the required zip.

[GUIDE][ROOT+CWM]Ulefone (Star) N9330 Note2 5,3" QHD (540 x 960) 512Mb/4Gb

Hi! to xda community.
Note: Only (Ulefone}Star N9330
CWM recovery and Installation suitable for all devices and modifications N9330, so as size of the blocks identical !!!
The attached archive contains patched CWM Bruno and scatter file N9330, also lies the archive original recoveri for rollback ...
1. Flash SP_Flash_Tool_v3.1224.01, in the archive is sсatter file N9330 ... recovery.img
2. Reboot device.
3. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip or CWM-SuperSU-v0.96.zip (copy to sdcard)
4. Power off device
5. Enter Recovery Mode: power+volume up+
6. Choose zip from sdcard
7. If you have a lot of file then use Volume-Down to go to
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip & press the Power button
8. Use Volume-Down to go to Yes – Install Root_Superuser_3.1.3_Busybox_1.20.2-Update1-
signed.zip & press the Power button again
9. Install from sdcard complete. Go Back to the main menu
reboot system now
Enjoy
Special Thanks Bruno for CWM
Download:
1.Factory stock firmware ROM 4.1 JB on October 25, 2012 (the camera ov5647) 512 RAM
20121025_e1901_v77_gq2002_5647_notv
2. MOD ROM N9930 512 RAM for camera ov 5647 512 RAM
JB_4.1.1_e1901_v77_gq2002_ov5647_MOD_RU
3. Dump stock firmware ROM 4.1 JB on November 26, 2012 (the camera p017) 512 RAM
N9330-20121126_e1901_v77_gq2002_9p017_fg
4. Factory stock firmware ROM 4.1 JB on December 3, 2012 (the camera p017).
N9330-20121203_e1901_v77_gq2002_9p017_fg
5. Dump stock firmware ROM 4.1 JB on December 3, 2012 (the camera p017) of N9330 1Gb RAM (contains CWM recovery and root supersu)
N9330-20121203_e1901_v77_gq2002_9p017_fg
6. Dump stock firmware ROM 4.1 JB from 12 December 2012 (the camera p017) 512 RAM
N9330-20121212_e1901_v77_gq2002_9p017
7. Dump stock firmware ROM 4.1 JB on December 25, 2012 (the camera p017) 512 RAM
N9330-e1901_v77_gq2002_20121225
8. MOD ROM N9330 512 RAM for camera 9p017 512 RAM
JB_4.1.1_e1901_v77_gq2002_9p017_MOD_RU
9. MOD ROM N9330 512 RAM for camera ov5647 512 RAM version 1.2
JB_4.1.1_e1901_v77_gq2002_ov5647_MOD_RU_VER_1.2

compayn fordanc
Hi there, thx for upload...but i have one Problem.
Flashing the recovery works, but it's not possible for me to enter recovery?!?
When i push "power on" and " volume up" the same time the phone gets an endless loop and nothing happens....when i release the buttons it boots normally up, but no recovery?
Maybe i did something wrong?
Did you tested?

Mawe79 said:
Hi there, thx for upload...but i have one Problem.
Flashing the recovery works, but it's not possible for me to enter recovery?!?
When i push "power on" and " volume up" the same time the phone gets an endless loop and nothing happens....when i release the buttons it boots normally up, but no recovery?
Maybe i did something wrong?
Did you tested?
Click to expand...
Click to collapse
who has cycle reboot, try flashed SP_Flash_Tool to patched boot.img... flash the together custom CWM of archive CWM_Bruno_N9330... tested on two devices N9330... all works as charm
Regards
feropont

I mean your Point 5
5. Enter Recovery Mode: power+volume up+
Click to expand...
Click to collapse
does not work for me!
While holding power and volume up nothing happens.....i get an endless loop! I saw android symbol (the one with the starting rocket) and then black screen, than again the android symbol, black screen....and so on....
when i do this prcess while connecting to usb to PC i can here connecting, unconneting signal......
when i release the buttons the android system starts normally but like i said no access to the recovery mode.....factory mode works (power and volume down)
What exactly is this new file for? I will test later this day, when more infos will be available.....thanks for your help and sorry for my bad english

i haveflashed now your File and now the phone gets an endless loop all the time, it doesn't start anymore (((
Please help me

Mawe79 said:
i haveflashed now your File and now the phone gets an endless loop all the time, it doesn't start anymore (((
Please help me
Click to expand...
Click to collapse
Are you sure at you on hands namely Star N 9330 and not other device? I'm not sure in it, in Russian forum already enough guys which flash CWM and Boot, and all work. You necessary flash original files with his device and be attentive next time. Sorry

Yes i have 100% the N9330 and your files doesn't work!
And your Boot.img crashes my phone
Flashing (your original firmware) isn't working too......the phone is in Bootloop.....so please help me!
feropont said:
Are you sure at you on hands namely Star N 9330 and not other device? I'm not sure in it, in Russian forum already enough guys which flash CWM and Boot, and all work. You necessary flash original files with his device and be attentive next time. Sorry
Click to expand...
Click to collapse

Mawe79 said:
Yes i have 100% the N9330 and your files doesn't work!
And your Boot.img crashes my phone
Flashing (your original firmware) isn't working too......the phone is in Bootloop.....so please help me!
Click to expand...
Click to collapse
attached Stock boot.img from N9330... if brick not restore, that at you not N9330, and one of the many modifications clone. Miracles do not happen...
Regards
feropont

what should I say? Big sorry first!
You are right mate, and i am the stupid guy :/
It is not a N9330 it is a Note2 "M Pai Royalty" you can see it for example here:
http://www.aliexpress.com/item/In-stock-New-Arrival-M-Pai-Royalty-Note-2-Smart-Phone-Android-4-0-MTK6577-Dual/670182900.html
do you know where to get or find stock rom or custom rom to get the phone back to life again?

Hey guys i have few questions?...how is the camera of this mobile is it really 8mp?...and how is the screen...is it dull and pix-elated??..compared to other branded phones screen?

i think it's real 5MP and interpolatet 8MP, Display looks nice!
ckethan said:
Hey guys i have few questions?...how is the camera of this mobile is it really 8mp?...and how is the screen...is it dull and pix-elated??..compared to other branded phones screen?
Click to expand...
Click to collapse

I can confirm that Its work properly on my Star N9330. Thank You.
Thank you. Its totally work good on my Star N9330.
feropont said:
Hi! to xda community.
Note: Only (Ulefone}Star N9330
The attached archive contains patched CWM Bruno and scatter file N9330, also lies the archive original recoveri for rollback ...
1. Flash SP_Flash_Tool_v3.1224.01, in the archive is sсatter file N9330 ... recovery.img
2. Reboot device.
3. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip (copy to sdcard)
4. Power off device
5. Enter Recovery Mode: power+volume up+
6. Choose zip from sdcard
7. If you have a lot of file then use Volume-Down to go to
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip & press the Power button
8. Use Volume-Down to go to Yes – Install Root_Superuser_3.1.3_Busybox_1.20.2-Update1-
signed.zip & press the Power button again
9. Install from sdcard complete. Go Back to the main menu
reboot system now
Enjoy
Special Thanks Bruno for CWM
Click to expand...
Click to collapse
---------- Post added at 10:58 AM ---------- Previous post was at 10:44 AM ----------
Hi guys, do you have CWM ROM for this Star N9330?

First you say it works good, and than you asked for CWM Rom?!?
So please choose, does CWM Rom work or not?

Star N9330
hi guys....is there something missing from the attached files or I do it wrongly? can't flash it using SPtools neither install it from SD card...any step by step guide on how to counter this matter? thanks in advance

1. turn off Phone and put out battery (usb cable is NOT plugged in)
2. start Flash SP_Flash_Tool_v3.1224.01 (flash_tool.exe) and choose "scatter loading"
3. choose from the folder "CWM_Bruno_N9330" the file called "MT6577_Android_scatter_emmc.txt"
4. there must be only one checkbox marked (recovery) - if not mark it and check if the phad is correct. ( you have to choose the file called "recovery.img" from the folder "CWM_Bruno_N9330"
5. now put battery back in phone again, click on button "download" accept the warning with "Yes" and THAN connect phone with usb to pc!
6. if all goes right, you should see a green circle with the message "download ok"
7. unconnect USB, put out battery for some seconds and put it back again
8. now you should enter the recovery mode by holding power-button and volume up-button at the same time
any questions?

N9330
Mawe79 said:
1. turn off Phone and put out battery (usb cable is NOT plugged in)
2. start Flash SP_Flash_Tool_v3.1224.01 (flash_tool.exe) and choose "scatter loading"
3. choose from the folder "CWM_Bruno_N9330" the file called "MT6577_Android_scatter_emmc.txt"
4. there must be only one checkbox marked (recovery) - if not mark it and check if the phad is correct. ( you have to choose the file called "recovery.img" from the folder "CWM_Bruno_N9330"
5. now put battery back in phone again, click on button "download" accept the warning with "Yes" and THAN connect phone with usb to pc!
6. if all goes right, you should see a green circle with the message "download ok"
7. unconnect USB, put out battery for some seconds and put it back again
8. now you should enter the recovery mode by holding power-button and volume up-button at the same time
any questions?
Click to expand...
Click to collapse
TQ Mawe79...stuck at step3...when I load the "MT6577_Android_scatter_emmc.txt"...a notification pop up says "Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal." any idea bro?

did you checked the path correct? Did you checked?
If you choose the rght file and the path is correct, maybe the file you have downloaded is corrupt?
So i would suggest...download again, and try again!

The CWM is Only CWM Recovery
Ya, The CWM Recovery is really work. But the CWM ROM is only CWM Recovery.
I need real ROM as like "CWM 10 Jelly Bean" for this Star N9330. Or may be CWM 9.
Mawe79 said:
First you say it works good, and than you asked for CWM Rom?!?
So please choose, does CWM Rom work or not?
Click to expand...
Click to collapse

Try Again
Mawe79 said:
did you checked the path correct? Did you checked?
If you choose the rght file and the path is correct, maybe the file you have downloaded is corrupt?
So i would suggest...download again, and try again!
Click to expand...
Click to collapse
the path correct... I'll try to download the file again...TQ

Rooted
edrose363 said:
the path correct... I'll try to download the file again...TQ
Click to expand...
Click to collapse
at last...proud to announce...I am ROOTED...:laugh: thanks everybody in da house...now its time to swap the internal & external memory :silly:

[UPDATED WITH NEW RECOVERY]Video Guide On Installing CWM Recovery For Galaxy Core

VIDEO GUIDE FOR CWM RECOVERY FOR GALAXY CORE
After Installing CWM Recovery. Do Not Boot Into CWM Recovery Via Any App Like SUperUser Or RootManager It Will Cause A Recovery Loop.If You Have A Recovery Loop Follow The SECOND POST
Hey people in this thread i will show how you can install ClockworkMod Recoveryor popularly known as the CWM Recovery.Your GT-I8262 or Galaxy Core Duos Comes With Stock Recovery with Help of Which you can perform various functions like Wiping Your Device,Wiping/Clearing Cache but with help of CWM recovery you can install ROMs,Take A Nandroid Backup,Partition Your SD Card etc. So as you can see this recovery is of great use.
Things You Require
1)CWM File
LINK
2)ODIN 3-1.87
LINK
3)Galaxy Core Drivers
LINK
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
PROCEDURE
1. Install the Galaxy Core Drivers On Your Desktop
2. Extract ODIN.zip on your Desktop
3. Copy Recovery.tar File In ODIN Folder(its preferable to keep them in the same directory)
4. Now Go To Your Phone Settings
5. Click On Developer Options & Tick USB Debugging
6. Turn Off Your Phone
7. After Your Mobile Is Completely Turned Off Go Into Downloading Mode - Press & Hold Volume Down +Home Key +Power Key, Press Volume Up Again To Proceed
8. Connect Your Phone To Your PC via USB Cable
9. Now Open ODIN 3.07
10. Your Phone Should Be Detected In ODIN If You Have Installed The Drivers Correctly
11. Now Click On The PDA Button Then Select recovery.tar(CWM Recovery File)
12. Press The Start Button. Now The Installation Should Start.
13. When The Installation Is Completed It Should Display "PASS" Then Remove The USB Cable From Your Device
14. Now To Go Into CWM Recovery - Turn Off Your Phone Completely.
15. Press Power Button + Home Button + Volume Down Button.
16. Now You Have A CWM Recovery!!!!!!!!!!!!!!
VIDEO
Hey i have just made a video and for people who have problem understanding the steps i have uploaded the video and it will help you clearly understand the steps.
:fingers-crossed:
2nd METHOD
If the above Method didn't work for you because some people are experiencing problems with the above method for the latest firmware so you can try this method which shall work.
Things Required
1)A Rooted Galaxy Core
2)CWM.zip File(In Second Post)
3)Uni-init APK(In Second Post)
4)A Mind
Let's Begin
1) Download and install BusyBox.
- Open and install BusyBox.
- Done!
2) Copy »Uni-init v1.0.apk« to internal memory and install Universal Init.d.
- Please see HERE the entire instructions.
3) Download and install Android Terminal Emulator.
- Open Terminal and type following commands:
PLEASE TYPE THE COMMANDS CAREFULLY OTHERWISE YOU CAN BRICK YOUR DEVICE
Code:
su
cd /storage/sdcard0
sh cwm.sh
- Done!
4) Switch off the Phone completely.
5) Press and hold »Volume up« and »Home«, then press »Power« while "Volume up" and "Home" are held.
- Use »Volume up« and »Volume down« to navigate items and »Power« to select.
3rd Method
First Download Flash_zip from the second post and unzip it in the ADB Folder so the folder where adb files are present you have to unzip there. Now Also Download the recovery.img file from the second post and again place it where the adb files are there.So,The 'flash_image' is within the attached zip file! Use the file within the zip file, NOT the zip file itself.Put the recovery image and the flash_image on the root of your C drive.
Let's Begin
(make sure you're in the command prompt and have changed directory to where the adb file is)
adb push c:\flash_image /sdcard/
adb push c:\recovery.img /sdcard/
adb shell
su
mount -o remount, rw /system
cp /sdcard/flash_image /system/bin
cd /system/bin
chmod 777 flash_image
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
IF I HAVE HELPED A THANKS WOULD BE APPRECIATED
PHILZ RECOVERY
PhilZ Recovery Has No Recovery Loop And There Is No Graphical Glitch Which Is Present. There Are Tons Of Features Which Are Present. Here Is The Video Guide
:victory:

Download Links
Here Are The Download Links-
FOR THE 3rd METHOD DOWNLOAD flash_image FILE AND Recovery.img FILE ONLY

Stuck on recovery loop follow this
If You Boot Into ClockWorkMod Recovery via any app like SuperUser Or RoM MAnager or Flashify it will cause the recovery to loop. This Is The Way To Solve That Problem Follow This
1) Download And Put This Attached File In External SD
2) Install This Zip Using CWM Recovery..
3) Turn Off Your Mobile Through CWM Advanced Menu Or By Pulling Out Battery..
4) Now Enter Into Bootloader Mode Using (VOL. DOWN+MENU+POWER )
5) Reinstall CWM Recovery Using Odin..
6) Install New Roms
7)Flash Stock Firmware HERE
ALWAYS ENTER CWM THROUGH BUTTONS AND NOT THROUGH ANY APP

please check your uploads once....
odin.zip is not present.
check first two uploads:
1. recovery.tar
2. recovery.tar.md5
which is the file to be flashed with odin??

[email protected] said:
please check your uploads once....
odin.zip is not present.
check first two uploads:
1. recovery.tar
2. recovery.tar.md5
which is the file to be flashed with odin??
Click to expand...
Click to collapse
Google to get Odin
Flash recovery.tar
Sent from my GT-I8262 using XDA Premium 4 mobile app

Thnx Man Link Updated
[email protected] said:
please check your uploads once....
odin.zip is not present.
check first two uploads:
1. recovery.tar
2. recovery.tar.md5
which is the file to be flashed with odin??
Click to expand...
Click to collapse
Hey thanks for reporting.I have updated the link.
Any other problems just post here
Thanks If i Have Helped

CWM Recovery
thecoreguy said:
Hey thanks for reporting.I have updated the link.
Any other problems just post here
Thanks If i Have Helped
Click to expand...
Click to collapse
Does it work also with GT-I8260?
Thx

Finally! CWM!
One question sir, what if I didn't succeed just in case how to recover my device?
Thanks

Firmware Recover
Geddd said:
Finally! CWM!
One question sir, what if I didn't succeed just in case how to recover my device?
Thanks
Click to expand...
Click to collapse
If u didn't exceed then you will need to Recover Your Stock Firmware. The only problem is your all data and apps would be deleted so i advise you to take a backup of your all apps by either Titanium Backup Or Through Apps Backup And Restore So that if even any thing goes wrong you will have backup of all your apps. I will make a video guide on how to recover STock Firmware.
:laugh: HIT THANKS IF I HAVE HELPED :laugh:

thecoreguy said:
If u didn't exceed then you will need to Recover Your Stock Firmware. The only problem is your all data and apps would be deleted so i advise you to take a backup of your all apps by either Titanium Backup Or Through Apps Backup And Restore So that if even any thing goes wrong you will have backup of all your apps. I will make a video guide on how to recover STock Firmware.
:laugh: HIT THANKS IF I HAVE HELPED :laugh:
Click to expand...
Click to collapse
Sir, I've done the procedure and successfully flash the cwm, but when I perform the recovery mode (Power up + Home + Power) a Samsung appears on the screen and displaying a warning logo at the bottom and it just keeps on vibrating
When I release the recovery keys, it'll continue to boot in normal mode. Any idea sir?

Geddd said:
Sir, I've done the procedure and successfully flash the cwm, but when I perform the recovery mode (Power up + Home + Power) a Samsung appears on the screen and displaying a warning logo at the bottom and it just keeps on vibrating
When I release the recovery keys, it'll continue to boot in normal mode. Any idea sir?
Click to expand...
Click to collapse
After the triangle under the samsung logo you should be able to boot in cwm. If not then try the second and 3rd method And plz post your baseband version and build number. Thnx Man for reporting
Why So Serious?!

Geddd said:
Sir, I've done the procedure and successfully flash the cwm, but when I perform the recovery mode (Power up + Home + Power) a Samsung appears on the screen and displaying a warning logo at the bottom and it just keeps on vibrating
When I release the recovery keys, it'll continue to boot in normal mode. Any idea sir?
Click to expand...
Click to collapse
Dont keep holding those keys.. let them go after 5 - 6 seconds. u should boot into cwm after that

siddhesh1609 said:
Dont keep holding those keys.. let them go after 5 - 6 seconds. u should boot into cwm after that
Click to expand...
Click to collapse
There you go. Thanks bro, it works now. I release the keys after the long vibrate :good: :good:
@ thecoreguy, thanks Sir, its working.
I hope there's an update for its graphics ui.

thecoreguy said:
Here Are The Download Links-
FOR THE 3rd METHOD DOWNLOAD flash_image FILE AND Recovery.img FILE ONLY
Click to expand...
Click to collapse
Does it work with GT-I8260???

Geddd said:
There you go. Thanks bro, it works now. I release the keys after the long vibrate :good: :good:
@ thecoreguy, thanks Sir, its working.
I hope there's an update for its graphics ui.
Click to expand...
Click to collapse
Kudos man.... I'm working on the graphics bug till then try to work with this CWM....
:laugh: PRESS THANKS IF I HAVE HELPED :laugh:
Why So Serious?!

nckimi said:
Does it work with GT-I8260???
Click to expand...
Click to collapse
You can try. But only try with 2nd Or 3rd Method... Don't use the Odin Method.... If it works den press thanks otherwise pm me...
Why So Serious?!

thecoreguy said:
You can try. But only try with 2nd Or 3rd Method... Don't use the Odin Method.... If it works den press thanks otherwise pm me...
Why So Serious?!
Click to expand...
Click to collapse
Keep up the good work.
I'll try and let you know.
Thx

nckimi said:
Keep up the good work.
I'll try and let you know.
Thx
Click to expand...
Click to collapse
Sure....
Why So Serious?!

keep it up bro.. nice work!!:good:

yoviejalle said:
keep it up bro.. nice work!!:good:
Click to expand...
Click to collapse
Thnx man....
Press Thanks If I have Helped
Why So Serious?!

[Solved] SuperSU Binary update failed

To solve the SuperSu Binary update problem, follow these steps
1. Download the SuperSu zip file from HERE
2. Place the zip file on your SD or internal memory
3. Reboot into recovery mode by pressing Volume up + Power button, or if it doesn't work, you can search on Google on how to enter recovery mode for your device
4. After entering recovery mode, press volume down button to go down, press volume up to go up, and press power button to select.
5. Select "Install Zip", and select the Update-SuperSu.zip file, and it will install it.
6. After installing, reboot and SuperSU will be installed and it won't ask for binary update.
Please hit the :good: button if you found this helpful
Also you can ask me if this method didn't work, I'll help you

It doesn't work for HTC 526G + , What should be done now ?

Hi. I have this issue on my S7 Edge. Do I boot into recovery mode and select Apply update from SD card?

forestfan said:
Hi. I have this issue on my S7 Edge. Do I boot into recovery mode and select Apply update from SD card?
Click to expand...
Click to collapse
wdym? you use a twrp right?,select install then select the update supersu.zip files

cakra13 said:
wdym? you use a twrp right?,select install then select the update supersu.zip files
Click to expand...
Click to collapse
Congratulations for dig of the year. You replied to him after 6 years

EugenStanis said:
Congratulations for dig of the year. You replied to him after 6 years
Click to expand...
Click to collapse
i dont know just find it and just reply it