Related
ok...first of all i am a complete newbie at this rooting and installing custom ROMs...
i rooted my galaxy fit last week and installed stuff like Link2SD,ROM Manager,RAM Manager,SD Booster and stuff...but all this is talking up a lot of my RAM and my phone memory is almost full with around 20-25 mb left...
1...so will installing a custom ROM increase my phone memory and my RAM??i have a 32 gb class 4 SD card...so i can partition 4-6gb out of it...no problem
2...i went through a lot of tutorials and forums regarding using SD card as phone memory(partitioning it)...but couldnt understand anything...so could someone please explain to me properly how to do it??
3...and finally how to install a custom ROM...i do not have internet on my phone+no wifi on my computer...so i cant use Clockwork Recovery on my ROM manager...so whatever i have to do i have to do it through my PC USB port...so a tutorial on that would be highly useful...
4...lastly i cannot decide on which ROM to use...im a a fix between...
[DEV] CyanogenMod 9.0.0-RC0-GT-S5670-GalaxyICS-KANG-beta3 [Latest update: 26.02.12]
VS
[ROM&Kernel][port][801 Mhz]CyanogenMod 7 MusicEdition_v3.0
***my phone is currently running on
Android Version 2.2.1
Basebrand Version S5670DDKA6
Kernel Version 2.6.32.9-perf [email protected]#1
Build number FROYO.DDKA7
+ i have rooted my phone***
thank you in advance...
pgchelsea said:
ok...first of all i am a complete newbie at this rooting and installing custom ROMs...
i rooted my galaxy fit last week and installed stuff like Link2SD,ROM Manager,RAM Manager,SD Booster and stuff...but all this is talking up a lot of my RAM and my phone memory is almost full with around 20-25 mb left...
1...so will installing a custom ROM increase my phone memory and my RAM??i have a 32 gb class 4 SD card...so i can partition 4-6gb out of it...no problem
2...i went through a lot of tutorials and forums regarding using SD card as phone memory(partitioning it)...but couldnt understand anything...so could someone please explain to me properly how to do it??
3...and finally how to install a custom ROM...i do not have internet on my phone+no wifi on my computer...so i cant use Clockwork Recovery on my ROM manager...so whatever i have to do i have to do it through my PC USB port...so a tutorial on that would be highly useful...
4...lastly i cannot decide on which ROM to use...im a a fix between...
[DEV] CyanogenMod 9.0.0-RC0-GT-S5670-GalaxyICS-KANG-beta3 [Latest update: 26.02.12]
VS
[ROM&Kernel][port][801 Mhz]CyanogenMod 7 MusicEdition_v3.0
***my phone is currently running on
Android Version 2.2.1
Basebrand Version S5670DDKA6
Kernel Version 2.6.32.9-perf [email protected]#1
Build number FROYO.DDKA7
+ i have rooted my phone***
thank you in advance...
Click to expand...
Click to collapse
well.....dude tell me if u can just have internet connection i mean...widout it u cannot download anything ...nd install nything...
---------- Post added at 03:12 PM ---------- Previous post was at 03:09 PM ----------
alrite m ready!!!just answer my questions...nd i wil help u out....
First of all upgrade your phone to gingerbread using Kies/Odin
Sent from my GT-S5670 using XDA
no net...
i was checking out a few videos on youtube about installing custom ROMs on galaxy fit when i found this....
www . youtube . com/watch?v=Xe-XMbDQfzQ (remove spaces)
well...can you take a look and say if its genuine or not??
like instead of their ROM i will use your Cyanogen Music 7 ROM...but the stuff they do with Odin...will that work on my phone??
i haven't watched that video but the link provided is for Cyanogen 9 which is unstable.
instead do this
YOU NEED TO UPGRADE TO GINGERBREAD BEFORE DOING THIS
--Download Complete Clockword Recovery Package from here
http://forum.xda-developers.com/showthread.php?t=1339640
--Flash it via ODIN
--Download the Music ROM
--Flash it via CWM
You'll find required instructions in the respective threads.
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....www.youtube.com/watch?v=nWc9hYEzMlM
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
Suvinay said:
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....www.youtube.com/watch?v=nWc9hYEzMlM
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
Click to expand...
Click to collapse
ya dont forget to get gingerbread first..just chek the other video of the same subscriber i gave u
PLZ CLIK ON THKZ IF I HELPED
If you need CWM i recomand that http://forum.xda-developers.com/showthread.php?t=1339640 for me works fine.
But don't forget to update to gingerbread using Kies. If update via Kies don't work u can find stock rom here http://forum.xda-developers.com/showthread.php?t=1533380
thanks man..but 1 more question
Suvinay said:
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
ya dont forget to get gingerbread first..just chek the other video of the same subscriber i gave u
PLZ CLIK ON THKZ IF I HELPED
Click to expand...
Click to collapse
what if i do this without the upgrade to Gingerbread...as in with the Froyo 2.2 i try installing the custom ROM as it shows in the video??
my kies is saying "connection error" when i click on upgrade firmware...so should i go for the custom ROM in my froyo 2.2??
u need internet connection, cuz when u update via kies its downloading the frimware
You can try to install over Froyo, but some features you can't use (like cam, wifi, bt etc) because customs roms are build in most cases on gingearbread
so i will do this??
inginer said:
You can try to install over Froyo, but some features you can't use (like cam, wifi, bt etc) because customs roms are build in most cases on gingearbread
Click to expand...
Click to collapse
1st option::
install the custom ROM on my Froyo 2.2
then add fix for the camera and wifi
will that work??
2nd option::
since Kies is not updating my firmware...i manually update my firmware and then root it and then install the custom ROM
i would really prefer the 1st option if possible...
I don't think it will work the first option, but you can try on your own risk.
Rather this second option would go. You have everything you need here if you want go with the second option.
there is no custom ROM for froyo in galaxy fit, cuz all custom ROM made for fit is based on gingerbread
pgchelsea said:
1st option::
install the custom ROM on my Froyo 2.2
then add fix for the camera and wifi
will that work??
2nd option::
since Kies is not updating my firmware...i manually update my firmware and then root it and then install the custom ROM
i would really prefer the 1st option if possible...
Click to expand...
Click to collapse
hey y dont u just download gingerbread from 4shared in dis video and update via odin http://www.youtube.com/watch?v=ThlLswWGFFU&feature=channel
finally did it...
updated to gingerbread>>installed CWM using odin>>installed CM Music 7.0
thanks a lot guys...
oh one last thing...how to partition my SD card...i have a 32 gb SD card...i want to use 2GB from it as phone memory...is it possible??if so how??
boot into cwm and select partition sd card from advanced menu.
Be careful as this will format your SD card.
Aspire said:
boot into cwm and select partition sd card from advanced menu.
Be careful as this will format your SD card.
Click to expand...
Click to collapse
okay..i partitioned my SD card with 2GB using CWM...but still when i open phone i see 180 mb internal memory...but SD card memory reduced by 2 GB :O
you need to flash the memory hack. check android development section.
here the official post of STAR I9220 DPAD
it is a different phone with different firmware of haipai Noble i9220 e Star N8000. For this phone you must see right topic.
here a photo of Star I9220 DPAD
the led is under the camera.
For flashing with Flashtool see the good guide of Bruno martins:
http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
firmware stock:
http://files.china-iphone.ru/51I92220PAD_20120428_e1809c_v75_gq1008_9p017.rar
Custom firmware:
thanks to Resquer
custom recovery :
http://forum.china-iphone.ru/download/file.php?id=35337
Script repartiton of MBR,= memory for App 2.gb
http://forum.china-iphone.ru/download/file.php?id=35036
root:
http://www.mediafire.com/download.php?wvb2v914y0uddtj
thanks to Johnny hung
Taiwan101 STAR-i9220 Custom ROM V.03
CWM Recovery download:
http://www.mediafire.com/?ro5d62qifqdgt99
https://www.dropbox.com/s/gd7cicaf5r786ix/CWM_recovery_I9220PAD(BM)_v0.4.rar
Custom ROM download:
http://www.mediafire.com/?6p63a7w257i4vpa
CHANGELOG:
1) Base on the Firmware 05-19-2012
2) root permission
3) Mei /ICS Launcher
4) DATA partition become 2GB
5) SDCARD become external TF card
6) Taiwan101 splash image
7) Taiwan101 default Wallpaper- ICS Launcher
8) Full Google service
9) AGPS issue fixed
10) Home key wake up
11) Battery % display
12) Pop Windows color change
13) SONY Mobile BRAVIA® Engine
14) Internal storage -512MB lose.....
11) all h/w working
Flash process:
1. flash back to official firmware
2. flash the custom recovery
3. into recovery mode
4. wipe data/factory reset & Wipe cache & Wipe Dalvik cache
5. Install ZIP from sdcard ->choice custom rom zip file -> OK
6. reboot
hello
i want flash my star i9220, but my problem is, the link above which discribse how to flash with flashtool is broken...
can you describe how it works, or do you have a working link for me?
greets
xenatrix
ps.: good collection
Ok.
After one day usage, second flashing and some more experience I can write something more
Rom looks quite nice. Flashing doesn't wipe my imei so You I didn't need to warry about that (I got it backuped up though).
Network location works nice.
Wifi has tha same week signal (I have made some changes to the hardware - just like on this page:forum.china-iphone.ru/viewtopic.php?f=46&t=19264&start=440) But it doesn't get siginficant better (maybe 10%).
GPS works fine - the fastest time for getiing signal is 26 seconds.
Google play works as a charm.
Yesterday i have made some mistakas during titanium restoring and that's why I got some problems with google play.
I have changed a bit the rom file and thrown away few chinese application that I couldn't understand
The only thing right now that bothers me (a little) is lack of a animation from desktop to the application menu. All others animations works but this one is missing. Is there a way to install new launcher (ICS default)?
Regards and thanks for a great job
fix link .-)
Pls help me about root Star X19i MKT6573
Hi Angel
i have Star X19i Mkt6573
i want just root it but i dont know
please help me..
Hi Angel you may enter on this site the files of these links: http://forum.china-iphone.ru/download/file.php?id 35337------- HTTP://FORUM.CHINA-IPHONE.RU /DOWNLOAD/FILE.php?id 35036 , since they give access denied, it would be appreciated if you wanna show some love also the contents of the folder: MT6575 Tools 4shared folder. Thanks
Ciao Angelo potresti inserire su questo sito i file di questi link: http://forum.china-iphone.ru/downlo...um.china-iphone.ru/download/file.php?id=35036 in quanto danno accesso negato, sarebbe cosa gradita se metteresti anche il contenuto della cartella: MT6575 Tools 4shared folder. Grazie
martelasol said:
Hi Angel you may enter on this site the files of these links: http://forum.china-iphone.ru/download/file.php?id 35337------- HTTP://FORUM.CHINA-IPHONE.RU /DOWNLOAD/FILE.php?id 35036 , since they give access denied, it would be appreciated if you wanna show some love also the contents of the folder: MT6575 Tools 4shared folder. Thanks
Click to expand...
Click to collapse
https://www.dropbox.com/s/gd7cicaf5r786ix/CWM_recovery_I9220PAD(BM)_v0.4.rar
Resquer said:
https://www.dropbox.com/s/gd7cicaf5r786ix/CWM_recovery_I9220PAD(BM)_v0.4.rar
Click to expand...
Click to collapse
Thanks to Resquer, i have a doubt what is the difference between CWM Recovery on mediafree and this on dropbox v.04 ? I saw that was inserted in the rom Mobile SONY BRAVIA® Engine, contrast and the colors of the display are improved? Thanks for the response ...
There are no differences, files are same.
I can't answer about Sony engine, because I use stock firmware.
Resquer said:
There are no differences, files are same.
I can't answer about Sony engine, because I use stock firmware.
Click to expand...
Click to collapse
There are not differences in display perfomance, because Mobile SONY BRAVIA® Engine influences on picture and video playing. Pictures and photos look better, sure!
Resquer said:
There are no differences, files are same.
I can't answer about Sony engine, because I use stock firmware.
Click to expand...
Click to collapse
Many thanks for the reply Resquer!
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
gynecs said:
There are not differences in display perfomance, because Mobile SONY BRAVIA® Engine influences on picture and video playing. Pictures and photos look better, sure!
Click to expand...
Click to collapse
Many thanks for the reply Gynecs!
Hello Everybody
thanks for the post , i have save my phone with this
Now i can to give you a new stock ROM for this phone
this stock rom provides to the constructeur
But i don't join an url to this post ( i don't have the number of post )
COntact me from MP for the url
@++ Spawn
USB VCOM drivers
Hello,please can anyone tell me how to install the MT6575 USB VCOM drivers onto computer so i can flash rom,
thanks
---------- Post added at 12:59 PM ---------- Previous post was at 12:42 PM ----------
sas007 said:
Hello,please can anyone tell me how to install the MT6575 USB VCOM drivers onto computer so i can flash rom,
thanks
Click to expand...
Click to collapse
also when i start the flashing tool connect my device a mt65xx preloader icon keeps flashing up in my devices on computer then going away then back continualy just doing this???my device shows in devices proper when connected normally for usb transversal etc.
please help as need to flash
---------- Post added at 01:47 PM ---------- Previous post was at 12:59 PM ----------
sas007 said:
hello,please can anyone tell me how to install the mt6575 usb vcom drivers onto computer so i can flash rom,
thanks
---------- post added at 12:59 pm ---------- previous post was at 12:42 pm ----------
also when i start the flashing tool connect my device a mt65xx preloader icon keeps flashing up in my devices on computer then going away then back continualy just doing this???my device shows in devices proper when connected normally for usb transversal etc.
Please help as need to flash
Click to expand...
Click to collapse
solved it thanks all
---------- Post added at 02:12 PM ---------- Previous post was at 01:47 PM ----------
Hi guys how do i flash to the custom rom it contains no scatter file?
sorry new to this
have you install CWM recovery (step 2) ?
if yes, then copy custom ROM onto sd card then proceed to step 3 below
wipe Dalvik is under "advance" option
good luck
Flash process:
1. flash back to official firmware
2. flash the custom recovery
3. into recovery mode
4. wipe data/factory reset & Wipe cache & Wipe Dalvik cache
5. Install ZIP from sdcard ->choice custom rom zip file -> OK
6. reboot
Hi
2.flash the custom recovery (how to do that)
3. into recovery mode (what is this)
how do i do this?please
also have tried to root with script provided but keeps saying error no device found ?
could you help with that as well as i can not find tutorial how to root
thanks for your help
UPDATE..Holy moly i did it all by myself jesus that was dam nerve racking
my first thoughts are good ones,for me the choice of animations is a bit ?
also not many ring tones and wallpapers???
again the wifi is not cutting it very poor,i have to be within 3 meters or so of router this defo needs a fix but for my first
visit into the world of custom roms i am glad i was able to sus it out.
i hope some very clever person can fix the wifi signal and build a very smart custom rom,i am looking forward to its arrival.
thanks to all who help, develop and share i salute you
custom rom
Hi guys have re flashed with Bruno ROM thanks Bruno...due to WiFi issues with the Taiwan ROM almost needed to be next to router and did not like the start up.
WiFi now great been outside and away about 20 metres and still has good connection.
as for any other changes in Bruno rom from stock rom i have no idea but so far seems good and stable.
Hello
Thanks Sas for the return
So with the stock rom , now the Wifi is good
Good news
but sorry , i don't know the changes
@++ Bruno
Hey guys,
can I use this ROM for my Star A9220 or do I need a different firmware? I´m looking for a possibility to root this phone.
Thanks in advance
accessories
Hello guys,i am wondering if anybody knows where i could buy case or covers for this device.
many thanks
---------- Post added at 08:34 AM ---------- Previous post was at 08:28 AM ----------
Spawn24fr said:
Hello
Thanks Sas for the return
So with the stock rom , now the Wifi is good
Good news
but sorry , i don't know the changes
@++ Bruno
Click to expand...
Click to collapse
Yes thanks mate works great now and no other problems
thank you.
I can't download the script repartiton of MBR,= memory for App 2.gb
the link seems to be out.
Hi guys,
I've created this topic, because I have some questions, I'm new at android. I want to install a custom ROM(CyanogenMod 9.1) and want to make sure I'll do everything right. Here is the installation instructions:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Click to expand...
Click to collapse
1. When I go to Recovery mode, it shows "Pico CMW-Based Recovery v5.0.2" and below it shows "Pico recovery by bbs.anzhi.com Ext(2, 3, 4) support by Yannou90". Am I running proper working ClockworkMod-Recovery? I get it from this rooting tutorial.
2. Saying "Flash CM9 zip from SDCard" it means "install CM9 zip from SDCard"(because in recovery mode there is "install zip from sdcard", nothing about flashing)?
3. How can I do "DO A DATA WIPE / FACTORY RESET"? Just simply choose "wipe data/factory reset" option from recovery mode?
4. After installing CM9 ROM, will it support overclocking? Or I'll have to install another kernel? If I'll have to, then which kernel should I install?
Thanks a lot. I know, very stupid questions, but please answer them .
1 From what I understand the recovery that you have installed derives from original cmw. Do not worry it will work fine
2 Yes, it means "install zip from sd card"
3 Go to wipe data/factory reset and confirm
4 Overclocking depends on the kernel you have installed, not the rom. Usually, the default cm kernel has overclocking (however, be sure to check this by going to settings in the rom)
polimeno said:
1 From what I understand the recovery that you have installed derives from original cmw. Do not worry it will work fine
2 Yes, it means "install zip from sd card"
3 Go to wipe data/factory reset and confirm
4 Overclocking depends on the kernel you have installed, not the rom. Usually, the default cm kernel has overclocking (however, be sure to check this by going to settings in the rom)
Click to expand...
Click to collapse
Thanks. I knew that "Overclocking depends on the kernel you have installed", so kernel is in rom(isn't it?). Two more questions:
1. There was mentioned "- Don't restore data using Titanium Backup! they might cause FC's", so how can I do that anyway? Maybe use another application, so which should I use?
2. How can I backup my current ROM? So if I'll do something wrong, I'll just simply install stock ROM(which I was backuped).
All android roms have a kernel. It is a fundamental component for the operating system
1 Regarding the backup, there are two great programs: MyBackup ( https://play.google.com/store/apps/...wMiwiY29tLnJlcndhcmUuYW5kcm9pZC5NeUJhY2t1cCJd) and rom toolbox (https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox&hl=it)
2 You can do a nandroid backup from recovery ("backup and restore")
Thanks. I need fast reply, which Gapps should I download from there? The one with version "CyanogenMod 9.0.x"? I don't know, because I'm going to install 9.1 version, but there isn't 9.1 version.
EDIT: found a topic, downloaded a CyanogenMod 9.0.x version...
Both cm9 and cm9.1 are based on the same system version (4.0.4) so the gapps for 9.0 will work fine on 9.1
polimeno said:
Both cm9 and cm9.1 are based on the same system version (4.0.4) so the gapps for 9.0 will work fine on 9.1
Click to expand...
Click to collapse
Thanks, but I've found solution. I think the last question, I've successfully installed CM9 ROM and I want to overclock CPU. Using the original kernel, max clock speed is 600Mhz(I'm using setCPU), so it looks like default CM9 kernel doesn't support overclocking. There is two kernels, which support overclocking(first, second). So which one should I choose(I think Cranium Kernel will be better decision)? And how can I know what will be max clock speed on Cranium Kernel?
And does
High undervolting- 600 Mhz now runs @ the same voltage as 480 Mhz,480 Mhz-> 500 Mhz @same voltage, 320 Mhz->340 Mhz @same voltage --> Better performance with better battery!
Click to expand...
Click to collapse
means, that if I'll make the clock speed lower, it won't save battery?
Thanks. I know, stupid questions...
The second one is for Gingerbread Sense Rom, you should install the first one
---------- Post added at 10:21 PM ---------- Previous post was at 09:55 PM ----------
If you have problem with the kernel, reflash the rom and gapps without make wipe
Okay, I want to install this kernel, but I don't really understand the instructions(there is something about clean-update.zip, then something about zImage.7z, modules.7z and etc). Can someone post the instructions, that should I use(I mean like "1. do that thing 2. do another thing")? These instructions are very complicated .
Thanks.
EDIT: Cranium Kernel says "Based on Htc French(telefonica) sources-Will work on all roms", so it meant to all GB ROMS, nothing about ICS?
zgintasz said:
Okay, I want to install this kernel, but I don't really understand the instructions(there is something about clean-update.zip, then something about zImage.7z, modules.7z and etc). Can someone post the instructions, that should I use(I mean like "1. do that thing 2. do another thing")? These instructions are very complicated .
Thanks.
EDIT: Cranium Kernel says "Based on Htc French(telefonica) sources-Will work on all roms", so it meant to all GB ROMS, nothing about ICS?
Click to expand...
Click to collapse
Those additional informations are for developers, ignore them. Normally install the kernel from recovery (after cleaning the cache and the Dalvik cache)
and restarts device. If you have problem just reflash rom
polimeno said:
Those additional informations are for developers, ignore them. Normally install the kernel from recovery (after cleaning the cache and the Dalvik cache)
and restarts device. If you have problem just reflash rom
Click to expand...
Click to collapse
Thanks, so which file should I download(there are 5)? And what about the edited part("EDIT: Cranium Kernel says "Based on Htc French(telefonica) sources-Will work on all roms", so it meant to all GB ROMS, nothing about ICS?")?
I had a look at the kernel thread .. It does not seem stable, many users have had problems with reboots. I would recommend you not to install it, maybe wait for it to update
About the cranium kernel, it only works with Gingerbread
---------- Post added at 02:39 PM ---------- Previous post was at 02:31 PM ----------
However, If you are looking for better performance, look at this thread http://forum.xda-developers.com/showthread.php?t=1924745
polimeno said:
I had a look at the kernel thread .. It does not seem stable, many users have had problems with reboots. I would recommend you not to install it, maybe wait for it to update
About the cranium kernel, it only works with Gingerbread
---------- Post added at 02:39 PM ---------- Previous post was at 02:31 PM ----------
However, If you are looking for better performance, look at this thread http://forum.xda-developers.com/showthread.php?t=1924745
Click to expand...
Click to collapse
Maybe I should try this kernel, but if something will be wrong, I'll restore previous(using method which you said)? You said, that I won't need to use wipe data/factory reset, so I won't loose any data, no risk(isn't it?). If you agree, say which file I should download.
You should download the file named "zImage.7z". Yes, the reinstallation of rom will overwrite the stock kernel of cm9
Hm, when I try to install zImage.7z, it's like "invisible", I've put that file in sdcard, but when I click "choose zip from sdcard" and browsing, I can't see it. Looks like it doesn't read that file. So what should I do?
By the way, did I understood your instructions correctly?
1. Wipe cache partition(didn't do it yet)
2. Advanced -> Wipe Dalvik Cache(didn't do it yet)
3. Install zip from sdcard -> choose zip from sdcard -> zImage.7z
Why did you try to do that read the instructions
Download the revised versioned build.prop
Rename it as build.prop
& Now follow the same instruction as you did for the last one
Download the build.prop
Open es file explorer>tab on favourites > "/">system
Den replace the build.prop (Yeah u need to overwrite )
REBOOT(IMPORTANT)
Done!
shortyoko said:
Why did you try to do that read the instructions
Download the revised versioned build.prop
Rename it as build.prop
& Now follow the same instruction as you did for the last one
Download the build.prop
Open es file explorer>tab on favourites > "/">system
Den replace the build.prop (Yeah u need to overwrite )
REBOOT(IMPORTANT)
Done!
Click to expand...
Click to collapse
How is it related with the Yannou90 kernel? build.prop wasn't mentioned in the instructions.
I get messed up becose of a previous link in the thread sorry, here's the kernel http://www.mediafire.com/?6v87qg0xdamxttp . Sorry again
Oooops again, when flashing just mount /system and /data, only one was required but i forgot which one, anyway there are no issues if you mount both.
shortyoko said:
I get messed up becose of a previous link in the thread sorry, here's the kernel http://www.mediafire.com/?6v87qg0xdamxttp . Sorry again
Oooops again, when flashing just mount /system and /data, only one was required but i forgot which one, anyway there are no issues if you mount both.
Click to expand...
Click to collapse
Thanks, can someone tell full instructions? Little bit confused now .
MIUI V6 [5.3.31] [5.4.1 update]
Cool MIUI Os.
Busyboxed.
Init.d Supported.
init.d Tweaks.
deodex ROM.
Themes support
stock browser working properly.
-:: How to install ::-
VIDEO LINK******PPT LINK******
MIUI 5.3.31 FULL ROM -install via recovery as shown in video above.
Boot the system. First boot takes time 3-5 mins so be patient.
wait until it boots.
reboot to recovery.
flash OTA update 5.4.1
Flash root or from attachments.
use thememanger zip from attachment (for english thememanager)
BUGS
data is stored on internal storage - use memfix zip from attachment to use external sd card)
camera sound cant be turned off - delete system/media/audio/ui/camera_click.ogg
some icons dont show picture (clock & weather) just use another theme -issue solved.
Credits:-
dk_richardp for testing .:good::good:
needrom.com for base ROM.
Fabulous.. Was just waiting for it to get stable.. Thanks sir ji.. Would flash right away :cyclops:
Dear avigi.......
Hi sir......
No words to say at the moment.......
Just happy for launching......
Realy great... Keep going......
U collecting lot of good wishesh from we people.....
Deeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep
waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaarm
reggggggggggggggggggggggggggggggggards
to
u peoples.............once again........
Couldn't flash.. Error in recovery while flashing
Using the old miui, from a previous thread, do I need to factory reset before flashing ota?
Aftab Memon said:
Couldn't flash.. Error in recovery while flashing
Click to expand...
Click to collapse
what error??? dk_richardp flashed and using.
aaayush_singh this is new rom. u need to flash it as new rom and OTA is only meant for this version only..
Aftab Memon said:
Couldn't flash.. Error in recovery while flashing
Click to expand...
Click to collapse
if u have partitioned 7 gb internal or any other than 4 or 1 gb
it might show error
has happened with me earlier.
Led light is not on while charging...and 3 g option is only in 1st sim.
aaayush_singh said:
Using the old miui, from a previous thread, do I need to factory reset before flashing ota?
Click to expand...
Click to collapse
Theme manager still in Chinese after flashing the zip! Did anyone else experience the same?
Can anyone please tell me How is the battery backup of this rom???
darsh1994 said:
Theme manager still in Chinese after flashing the zip! Did anyone else experience the same?
Click to expand...
Click to collapse
Use your browser to download themes from the web, in the themes, select the rightmost circle, the one that looks like download icon, and then go to import from ad card option(that's written in English) and locate the downloaded theme, apply it and enjoy...
---------- Post added at 07:14 PM ---------- Previous post was at 07:11 PM ----------
mujaid714 said:
Led light is not on while charging...and 3 g option is only in 1st sim.
Click to expand...
Click to collapse
Change the preferred Sim for data usage to 2nd Sim, then you can enable 3g... Note that only one aim supports 3g network at a time(saves battery too).
Led light is only 'on' when battery is below 15% or above 90% (in my case)
---------- Post added at 07:15 PM ---------- Previous post was at 07:14 PM ----------
[email protected] said:
Can anyone please tell me How is the battery backup of this rom???
Click to expand...
Click to collapse
Battery backup is normal, 7hours of SOT with constant WiFi usage, download in BG and web browsing....
avi sir plz post these 2 patches to Version ROM Series 005 - MIUI V6 - 6/3/15
the memory patch works very well on the previous rom , now default storage is sdcard
after applying the theme patch first display in english then automatically goes to chinese
most important thing of this patch is you can download any paid theme without mi account
thanks for the patches :good::good::good::good::good:
1. MIUI6 Mem Fix.zip
2. MIUI6_ThemeManager-patch.zip
3g
i thinks there is G issue in this .. I m not able to connect to 3g network.. does any 1 else is facing the same.
@aaayush_singh thanks for the review.
@rohitsinghpu if ur using older version of MIUI u can directly flash these two patchs for memory and thememanager.
@mujaid714 see this for 3g.
avi3230 said:
@aaayush_singh thanks for the review.
@rohitsinghpu if ur using older version of MIUI u can directly flash these two patchs for memory and thememanager.
@mujaid714 see this for 3g.
Click to expand...
Click to collapse
3g problem is still persisting
its not connecting to 3g for me just like in its previous rom,
further even after setting data connection to sim2 the option of Preferred Network doesnt show in sim2
incidently it disappears from sim1 settings too
mcd_legend said:
3g problem is still persisting
its not connecting to 3g for me just like in its previous rom,
further even after setting data connection to sim2 the option of Preferred Network doesnt show in sim2
incidently it disappears from sim1 settings too
Click to expand...
Click to collapse
Were you able to set 3g as preferred network?
If yes, go to settings, disable Sim 1, enable data, then re-enable Sim 1... You'll be able to use 3g data on Sim 2. (Tried and tested by me)
The process is long and tiring... But you haven't got any other choice...
mujaid714 said:
i thinks there is G issue in this .. I m not able to connect to 3g network.. does any 1 else is facing the same.
Click to expand...
Click to collapse
Replace the modem.img file from stock update S005, go to recovery, wipe cache/dalvic and reboot
Can i directly copy or i need to it the rom and flash the whole file again...and what can i do if i want sim selection option while messaing and calling.
mujaid714 said:
Can i directly copy or i need to it the rom and flash the whole file again...and what can i do if i want sim selection option while messaing and calling.
Click to expand...
Click to collapse
Replace directly using es explorer or any root browser.
Sim selection option while calling or messaging is provided by default, u don't have to do anything for that.
Rom is smooth, battery backup is nice, some minor bugs are there, hv a look on screenshots....
I’m presenting my 3rd ported ROM MIUI6_v5.8.6 for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Turkdevs.com for the port rom,
4) Dr. Avinash for MIUI6_Boot Logo,
5) Of course, me for Repartitioning Xolo Q3000 & Porting ROM. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiuiV6_5.8.6.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install MiuiV6_5.8.6.zip
6) Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7) Immediately, Install the MIUI6_5.8.6_Patch.zip
8) Again, Wipe Cache & Dalvik Cache.
9) Reboot System.
10) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) For full changelog, visit: http://en.miui.com/forum.php?mod=viewthread&tid=141453&highlight=5.8.6%2Bfull%2Bchangelog
Bugs:
Report, if you found any.
Download Links:
1) MIUI6_5.8.6_Rom
2) MIUI6_5.8.6_Patch
Note: For Engineer Mode, dial *#*#3646633#*#*,
All the Best, Guys
Screenshots:
MIUI6_5.8.6
Customized MIUI6
Updates:
Bug Fixes:1) Audio settings & Video fix
downloading..will post the review soon...
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
mujaid714 said:
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
Click to expand...
Click to collapse
Fix is ready to upload, check the video app & let me know, because it's fc for me.
I checked for storage fix but, both stock & port ROM have same figures for fstab. So, sorry for that, as soon as it's fixed, I will upload the patch.
Sent from HM NOTE 1W_MIUI6_5.8.6
mujaid714 said:
Very good and lag free rom...got fc on audio setting and internal storage detecting as memory card.. It seems speaker volume is low..rest all is ok..thanks for the update.
Click to expand...
Click to collapse
plz flash the Stock 007 full kitkat rom by sptools. [http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902 ].....after that flash this beautiful rom .....see that ur problem solve or not
i am using this stock rom & i don't find any low sound or sd card as phone stogare problem... plz try this
sachin.r.fulzele said:
Fix is ready to upload, check the video app & let me know, because it's fc for me.
I checked for storage fix but, both stock & port ROM have same figures for fstab. So, sorry for that, as soon as it's fixed, I will upload the patch.
Sent from HM NOTE 1W_MIUI6_5.8.6
Click to expand...
Click to collapse
I didnt got any fc in video app but it cant play any video..añd waiting for ur fixes..
---------- Post added at 10:06 PM ---------- Previous post was at 10:06 PM ----------
rohitsinghpu said:
plz flash the Stock 007 full kitkat rom by sptools. [http://forum.xda-developers.com/q3000/orig-development/xolo-q3000-kitkat-4-4-2-007-rom-t3080902 ].....after that flash this beautiful rom .....see that ur problem solve or not
i am using this stock rom & i don't find any low sound or sd card as phone stogare problem... plz try this
Click to expand...
Click to collapse
Thanks bro will try this
mujaid714 said:
I didnt got any fc in video app but it cant play any video..añd waiting for ur fixes..
---------- Post added at 10:06 PM ---------- Previous post was at 10:06 PM ----------
Thanks bro will try this
Click to expand...
Click to collapse
i want to clarify one thing i am talking about the @sachin.r.fulzele g 5.7.9 miui rom,,,...till now i don't try the sachin.r.fulzele miui 5.8.6 rom
that i don't have any problem with miui 5.7.9......i will try the miui 5.8.6 rom tomorrow
"Audio settings & Video fix" link is added in bug fixes section.
Sent from HM NOTE 1W_MIUI6_5.8.6
Once again good port, everything working fine.:good::good:
audio fixed but default video app is missing, mxplayer solves but cant able to play video from gallery, not a big issue.
about mem swap, i extracted vold & sdcard bin files from MIUI5.3.31 ported by avi and replaced it. works well fr me. i hv attached a flashable fix.:angel:
Jagadish-ravi said:
Once again good port, everything working fine.:good::good:
audio fixed but default video app is missing, mxplayer solves but cant able to play video from gallery, not a big issue.
about mem swap, i extracted vold & sdcard bin files from MIUI5.3.31 ported by avi and replaced it. works well fr me. i hv attached a flashable fix.:angel:
Click to expand...
Click to collapse
Will it work for miui 5.8
Thank you @sachin.r.fulzele for the beautiful rom update.
I just want to know:
Does following problem from previous version (Ported by Avi) are resolved in this version:
1. Auto theme Changing
2. Fonts from themes were not working
3. Ram showing 1 Gb instead of 2Gb. ( I know its just showing 1gb but have power of 2gb)
mujaid714 said:
Will it work for miui 5.8
Click to expand...
Click to collapse
Yes it is working fine
Flashed.. Bricked ... Recovered..
I think it took out my final boot .. I also flashed couple of roms after this.. Still stuck on final boot setup..
Thought of changing the recovery.. Still no good.. Sp flash tool helps a lot..
Another thing i noticed was the Turkish language with many fcs .. I am a big miui fan .. Still wait for avi sir n our team to make it a more stable
Cheers.. !
bug
It's not major bug
I found it in-call ui
[email protected] said:
Thank you @sachin.r.fulzele for the beautiful rom update.
I just want to know:
Does following problem from previous version (Ported by Avi) are resolved in this version:
1. Auto theme Changing
2. Fonts from themes were not working
3. Ram showing 1 Gb instead of 2Gb. ( I know its just showing 1gb but have power of 2gb)
Click to expand...
Click to collapse
Everything is working fine
Aftab Memon said:
Flashed.. Bricked ... Recovered..
I think it took out my final boot .. I also flashed couple of roms after this.. Still stuck on final boot setup..
Thought of changing the recovery.. Still no good.. Sp flash tool helps a lot..
Another thing i noticed was the Turkish language with many fcs .. I am a big miui fan .. Still wait for avi sir n our team to make it a more stable
Cheers.. !
Click to expand...
Click to collapse
ROM is already stable & nearly bugless, don't spread rumors, read instructions first & then go for it.
Vinay Patani said:
It's not major bug
I found it in-call ui
Click to expand...
Click to collapse
How did u get this? R u using some other language as default?