Related
I have an ATT Tilt.
So..... I tried cooking my own ROM (hey you gotta try it sooner or later)
When I flashed it, it went to 100%.
On the reboot is the splash screen loads and it reads the SW numbers (R/G/D)
After that it gets stuck..permanently.....
Tried flashing from my microSD (Patriot 2GB) with no luck.
It says (quickly) image not found and goes into tricolor mode with serial on the bottom.
Is there any utility that can force activesynd onto the machine (diag mode?)? or fix this?
Otherwise there's a few week old ATT Tilt that for sale
...
ehhh.....solved.....
managed to sync without battery, boot in BL mode and flash an original ROM.
did i mention this community is the best?
I finally got the nerves to put the new radio and rom version on my HTC Touch pro.
It went wrong at 1%, and the recovery option was in a loop.
So I did exit the process after recovering/restarting like 12 times.
It did exit on a 262 error at 0% or 1%...
Ok let’s try one other rom; now I did first run the HardSPL Unsigned 190.1.3 again as advised before every rom update, and it was successful...
But when booting the phone it is stuck at the black TOUCHpro screen with the following red text at the right bottom.
R 1.02.25.19
G 52.33.25.17U
D 1.90.00.00
Now whatever I try, whatever rom version I use, it always tells me the phone is not connected by USB.
Seems like the USB driver or something is not loaded at this stage. Maybe when by some key combination I get the phone in the ROM/Boot loading menu I can try other rom version. But I could be completely on the wrong track here.
I was so happy with my WM6 phone, please help me so I can enjoy my phone again, hopefully not with the old rom and radio ofc, when possible.
Don't panic!
Put a the NBH file of the rom you want to flash on your storage card and rename it to RAPHIMG.NBH. Start the bootloader (reset and keep pressing the volume down button) and follow the directions on the screen. When it sais it flashed succesful reset again.
Of course this only work if you did install the hardspl...
Good luck,
Cheers,
Cacti
Ok found that when I go in bootloader mode manually by pressing the Volume-down and reset button at the same time it can connect to my PC.
But no matter what rom version I try, original, Stock or custom it stops at 0% or 1% .. Giving me any of these errors :
readme.doc said:
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
Click to expand...
Click to collapse
Plz help me, I am using the original USB cable and did try a general one, no-USB hub, did remove my firewall/virus scanner software and all.
Put the NBH file on you storage card and rename it. Don't use rhe RUU...
Thanks le_cactus, the above message crossed yours..
I will try getting the new rom trough my MicroSD card, good thing I have no regular Diamond..
Diamond?
This is the HTC Touch Pro forum
Yhea I know, I have the TouchPro... aka as the Professional version of the HTC Diamond in the Netherlands.
Raphael is rarely used here, only by people who are into rom's and TF3D hacks and stuff...
Damn my CF/MD adapter does not seem to work, or my card reader, printer with card reader and my iPaq don't support 8GB cards..
Guess I have to go to the shop tomorrow for a smaller card with a new adapter or a card reader that accepts MicroSD to get my phone back to order.
Thanks for your advice and cooling down my panic moment.. "Bedankt !!!"
Thanks man for 14 euro's I did buy me a card-reader that is able to handle my 8GB microSD card and my problem is solved. Running on 405.3 with latest .28 radio drivers now.
Please help.
I have the Verizon TP World Phone w/SIM card.
I downloaded the HARDSPL described as such: this package is for Rhodium CDMA-GSM worldphone version only (CDMA Touch Pro 2, not the original Touch Pro) devices. only RHOD400, RHOD500 modelids are accepted. this Hard-SPL supports WM6.5.
This process went successfully and I made it to the tri-color bootloader screen.
Next I ran this flashed this ROM NRGZ 21864, which appeared to complete successfully via PC, but when phone rebooted it just shows black w/Touch Pro 2 in middle of the screen.
Tried resetting, batter pull everything can't get anything to happen.
**Update: I was able to now get it into tri-color boot loader so what should I do with it now? It says SPL-1.00.Olinex, so its still unlocked. Should I just retry the rom again?
What did I do wrong? Is this phone dead? How do I get to bootloader? What should be my next step if phone is not dead.
Thank you!!!
Get a different rom that one didnt load or you could try reflashing doesnt seem as it took properly but no fears your phone is not bricked
Make sure you get a rom built for CDMA phones. this isnt the proper section for that goto RHODUIM CDMA
To Flash from the SD card, the .nbh file needs to be named "RHODIMG.nbh"
copy the .nbh file to a micro sd card, prefarably a 2gb or lower formatted as a FAT32
plug it in
get into the boot loader
i would recommend getting the stock ROM for your carrier and flashing that before moving to a custom ROM
hope that helps
ME TO
How do you get it to load in the bootloader menu ? Any luck with fixing it?
LECKEY73 said:
How do you get it to load in the bootloader menu ? Any luck with fixing it?
Click to expand...
Click to collapse
To enter the bootloader hold volume down and power (the red end key, not the sleep key on top) and press the stylus into the reset button. Once you see the tri-color screen you can release volume and power.
Same thing happened to me on my flash to that exact ROM. I guess sometimes it just doesn't flash correctly for some reason. No worries, enter bootloader mode and try flashing to MightyROM. After that, I was able to flash to whatever ROM I wanted. (But then I flashed back...MightyRom rules!!)
the spl 1.00 is fine. just go here it's for cdma phones only.
thanks everyone, got it back into bootloader via the challenging (hold both buttons and hit reset) Years of cosole gaming clearly paid off for those acrobatics.
Reflashed to original rom/radio, will put MightyRom back on..think I just needed to bump my head a bit, start over after some lessons and get this running better.
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
clariceave said:
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
Click to expand...
Click to collapse
Depending on what happened, it's a yes/no situation. What did you do?
Try this:
get into bootloader mode (tri-color screen): Take out the battery for one minute. Put it back in. Getting into bootloader mode is done by holding the Volume down button while you do a press/release of the Reset button. OR hold the Volume down button while you do a press/release of the Power button.
That should get you to bootloader mode. Now, plug in your USB to the PC. Flash a CDMA ROM from there by running the .exe. If you cannot do that, transfer the .nbh file (rename it to "RHODIMG.nbh" [no quotes]) and follow these instructions.
Good luck, and happy new year!
*The majority of the CDMA ROMs can be found at PPCGeeks*
PLEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
RE:LEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Should work
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
foxxyroxy5 said:
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Click to expand...
Click to collapse
No problem. Enjoy your unbricked TP2 this new year!
Bricked my Sprint Touch Pro 2
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
[email protected] said:
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
Click to expand...
Click to collapse
See if you can do a hard-reset right now. While phone is off (which it is), press and hold Talk/Send, End, and Power button at the same time. Wait for a screen to pop-up. Follow steps to hard reset. That will bring it back to factory defaults.
If it doesn't work, maybe you could post your question on PPCGeeks, where a lot of CDMA people go. They might be able to help you.
Can you Unbrick a Touch Pro 2
Hi to all,
I'm a new here and a little desperate . I flashed my rom by using a raphael update instead of Rhodium. My phone got bricked. My phone is a Sprint HTC touch pro 2.
At the moment, it will not boot, when I plug it to my computer and it was looking for qualcomm cdma MSM drivers.
I tried sof and hardware reset including the boot loader. Nothing works. I also tried using different RUUs. Nothing works. I hope somebody can help me.
Fixed the problem...bought an android...ha,ha...
smileyzst said:
The same exact thing happened to my tp2.Accidently flashed touch pro(RAPHEL)rom and now nothing!!It won't power on or anything,can someone help me too...Is my phone bricked???? Help please!!!
Click to expand...
Click to collapse
Well if you can power it on, and go to bootloader, then your phone is just fine. Just flash a Rhodium ROM.
I suggest take battery out, and put it back in after few seconds, to see if it powers on. If not, leave it in the charger, and see if it powers on.
After installing the HardSPL, I decided to flash my US Cellular CDMA phone with a GSM rom and of course it bricked it. The phone would only boot to bootloader, so I was going to have it repaired for $70. But if I was willing to flash my device, then I'm sure as willing to look for a DIY solution somewhere. Goodthing I searched this forum, because the answers where right here!
Just format your microSD to FAT32, install an extracted stock ROM kit to the root of the SD insuring you rename the .nbh to RHODMIG.nbh and place the other extracted files on the SD as well. Place the microSD in your HTC Touch Pro2 and boot to bootloader. You may have to take steps to get to the bootloader, mine booted to bootloader automatically anyway at that point. Follow onscreen instructions, and your Touch will be as good as new!
thanks a million for helping me unbrick my tp2
wow man thanks a million, i followed the instru and it worked but was slow so i did task 29 and flashed the rom i wanted and it works great, i really appreciate your help on this
How did you get to the bootloader menu. I am using CDMA HTC Pro 2 by Sprint. Thanks
goldenu said:
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
Click to expand...
Click to collapse
@rocco24
Did everything go alright? If not, just post here or send me a PM.
Hi i have a different issue I accidentally flashed the wrong nv items 01192 and now its rebooting. if someone can dump their tp2 sprint 6.5 nv items please help. I am cut off from the world of cell phones at the time. I read that i also would need the radio dump which in my case is the same one on the 6.5 ruu windows version. any feed back or advice is welcome. please help guys.
Oscar
sumflipnol said:
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
Click to expand...
Click to collapse
I wonder if you can help me; i have a sprint hybrid cdma/gsm and it has black screen no lights at all but the qualcomm cpu is easily recognized by pc-have tried all known methods to get in bootloader but i get no lights at all??-have fully charged batt from another tp2=any experience w this problem?-thanks
keeps rebooting?
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
velo25 said:
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
Click to expand...
Click to collapse
Try flashing another ROM or try putting in another battery and see if the bootloop issue goes away. Kindly update the status of your post if you fixed the issue or are still having problems.
Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
CoffeeM said:
Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
Click to expand...
Click to collapse
My first question is, is there any ROM's available for your device. If so, boat into the tri-color screen & try flashing a ROM. Also, have you tried Hard resetting your device.
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
CoffeeM said:
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
Click to expand...
Click to collapse
Did you try booting into the Tri-Color Screen & flashing one of the ROM's from here?
Hold Volume down & press power, keep holding volume down until you see the tri-color screen (red/blue/green/white), when connected to PC it'll say USB at the bottom & windows should install a new driver. Than you run the flashing program from one of those threads.
I can't do it, it doesn't work, now it freezes on HTC white screen, and doesn't connect to restore either,
Nobody is going to help you if you aren't trying suggestions.... It should most definatly go into bootloader... It won't even have a chance to freeze nothing loads at that point.
Sent from my HD7 using XDA Windows Phone 7 App
I did try to flash, but this only works, RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE other ones I get [error] 208, but still it get stuck at HTC screen, is it because I have to have nk.nbf file, if so can anyone tell me where and how I can get it working, I tried all night and still trying to fix, I really need it working!
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
CoffeeM said:
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
Click to expand...
Click to collapse
If it's still getting stuck, maybe you have a faulty SD Card or the ROM chip got corrupted somehow. You may have to send it in under warranty. My only other suggestion would be to try RSPL or HSPL (HSPL void warranty) & than try flashing a ROM again if RSPL/HSPL supports your model of the HTC Surround. I'd suggest RSPL as it's temporary & won't cause any warranty issues.
Instructions:
1) Boot into Tri-Color Screen with Volume down feature.
2) Connect to USB to PC.
3) Wait for Windows to install new hardware driver. (Should be done already as you tried flashing already)
4) Run DFT_RSPL_WP7FG1_LAUNCH.exe from ZIP attachment in thread linked below.
5) Wait for your device to reboot back into Tri-Color Screen on it own.
6) Flash ROM. Optionally, flash HSPL with DFT_HSPL_WP7FG1_INSTALL.exe from same zip, than flash the ROM.
NOTE: Using HSPL flashes it to ROM & if you are having hardware issue, this could completely brick the device. So, proceed with caution!
[DFT] HSPL / RSPL for HTC WP7 First Generation
It wouldn't be because of the Mango Beta, flashing the ROM should of reformatted the ROM chip & SD Card, erasing Mango.
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
CoffeeM said:
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
Click to expand...
Click to collapse
To check the SD Card, you need a Nokia device. Nokia devices can format WP7 SD Cards. Nothing else will recognize the format WP7 uses. Plus, you have to open the device up to get it out, which in most cases will void your warranty. One of the screws has a void sticker on it & if your try removing that screw, your warranty is void as they can see you tried removing the screw by the sticker being missing or damaged.
If possible, list all software I can try to restore or fix, or tweak to make work or reset something in the phone to work! Anything at all!
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Oh wait, are you trying to restore after successfully installing a new ROM?
If so, don't restore, the restore isn't compatible anymore. You can reinstall all apps by finding them in the marketplace again (on device, not ZUNE PC). As long as you use same live ID on setup, the apps should be read as purchased.
CoffeeM said:
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Click to expand...
Click to collapse
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
CoffeeM said:
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
Click to expand...
Click to collapse
Bootloader doesn't matter, if you flash a new ROM, it does as the restore won't be compatible with the new ROM. The restore must be made from the current ROM at least to my knowledge. It could be that maybe the restore is corrupt even.
There is also a tool that lets you do it in Windows. It was by Samsung or something. I'll try to find it and post it in here.
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
Sent from my LG-P999 using XDA App
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
a sony psp will also do this, provided you have the microsd to mspd converter.
But, why doesn't it work after flash, after many attempt still gets stuck at HTC screen, the phone is probable not repairable right, or there still may be a chance for me to get it back again!