Database Info

PC no longer sees SDcards (int/ext) in Mass Storage

Hey guys,
1) thanks to many for tips/tricks etc, especially easy root
2) Man this GPS is a pain in my ass. Otherwise, BEAUTIFUL phone. (Day 1, 20 minutes into launch day)
Real problem:
I got weird behavior yesterday, wherein I connected the phone to my laptop (tried them all same prob) and it's configured as auto Mass Storage (I use DoubleTwist) but now I see the device, but NOT the SD cards...
Things recently done that could be a part of the issue, I suppose: installed SDK.
Now, unless I have it in USB dbg, and using Droid Explorer, I can't even friggen' tell it's there!
Any ideas? :/
Also, yesterday on the way home where it suddenly told me the that the SDCARD was invalid... rebooted and it's fine.. but some media arent locating right.
UHg.
Please help if you can, and TYIA

When i had USB Debugging on i couldn't see Drives also , turned that off , and all is back to normal.
And Mass Storage mode on off course. And once connected select Mount SD cards from phone.

I did have some weird issues with mounting/unmounting behavior when I connected the phone to my computer, but when I toggled USB debugging it started working perfectly.
in your phone go to "Settings -> Applications -> Development -> USB debugging" and enable that option. This allows both my internal SD and my external SD card to show up. While the phone is connected to the computer, it unmounts those cards from the phone so if you look up your "Settings -> SD card and phone storage" you will see them marked as unavailable. But after disconnecting the phone will remount them.

Well,
I've gone back and toggle usb debugging back on.
As point of fact Astro is now telling me /sdcard is empty, and threw me an error "error creating external cache". Doesn't help that Settings > SD Card and phone Storage > Internal SD card is showing me unavailable.
Oh crap.. :/ guess I might be exchanging soon

max_warheads said:
Well,
I've gone back and toggle usb debugging back on.
As point of fact Astro is now telling me /sdcard is empty, and threw me an error "error creating external cache". Doesn't help that Settings > SD Card and phone Storage > Internal SD card is showing me unavailable.
Oh crap.. :/ guess I might be exchanging soon
Click to expand...
Click to collapse
This happened to me before I enabled debugging. Simply power down the phone and restart it. It will remount your drives.

I've power cycled this thing so many times over the last day, it'd think a weeks gone by.
New whacky behavior... apparently the included Music Player sees my songs, but DoubleTwist doesn't. Also, about half my MP3's have 4 entries... oh what fun.
Looks like I might just be backing up my contacts, factory reset, format SD and reflash the stock image :/

When connecting to the PC with MTP, it loses the SD card if the PC doesnt properly talk MTP to it. Reboot.
When connecting to my work PC as mass storage, its not even seen on the front ports.
Reboot phone.
Set to USB to Mass Storage.
Install Samsung drivers on PC (needed? idk)
Install DoubleTwist on PC.
Uninstall DT on phone.
Reboot Phone.
Install DT on phone.
Plug into back port of work PC
Working drive.
Oh wtf. Wierd. I'll wax my config at home entirely tonight....

Rooted and now mounting USB does not work!

I've been sideloading apps for awhile now non-rooted, and copying stuff to/from my phone by mounting the USB.
Today, I decide to root using the 1-click root method, and it works fine...
However, when I connect my phone via USB (debugging on of course) and then mount my USB my PC no longer recognizes the SD cards like it did before???
Can somebody help me?

I've had two of these phones already (first one had the auto tun off problem).
Both have had this problem when I initially got them. The previous one had it after rooted as well. Its not really a bug maybe. Just go into settings>applications>USB settings and choose anything other than "mass storage". Then exit out, plug in the usb, let it do its thing (it wont work). No unplug the USB cable and go back into settings and change it back to "mass storage". It should work then.
I think if you just select anything other than mass storage then choose mass storage again it should work too. Its a little finicky. Once it starts working, it won't stop though. Just that initial connection I guess.

Try changing usb plug at pc. There has been issues with usb ports on main board. Also update chipset drivers.
Sent from my SAMSUNG-SGH-I897 using XDA App

Phone not recognizing usb connection when connected to PC

I was recently staying with some mates and tried connecting my HTC Legend to their laptop to transfer files, but the Legend did not recognize it was connected to a computer, just had the charging icon as if the cord was plugged into power.
I have the 'Default connection type' as Disk Drive, 'Ask me' each time option enabled.
On the computer, no autoplay or anything happens like it used to. I can see a removable disk drive, but it has the "Please insert a disk into drive X" error when I try open it.
I can access the SD card and everything fine through the phone..
Anyone know what's up?
Cheers
EDIT: Stock unrooted Legend
EDIT: Nevermind, rebooted phone and it works now.. sorry

This exact same thing started happening to me last night as well. I can see the drives in "My Computer", but they are greyed out and give me the "Insert drive to continue" error message. What gives?

usb
howzit guys
have you'l tried switching the phone off and then on again?
i've had this happen few times
its normally some app causing it not to popup or to be very slow in popping up
wait awhile.if still nothing then try switch off and then on and then connect the usb to the pc

[Q] incosistent usb mass storage mounting.

I seem to be encountering a slight inconsistency in regards to mounting the phone unto my windows 7 box.
Essentially what happens is this: I plug my phone into the computer and the little dialogue box pops up onto my phone (Kies, Mass Storage, PC Internet etc). I push "Mass Storage" and ideally what is supposed to happen is that the phone mounts onto windows.
Unfortunately it doesn't seem to mount.
What does happen is that the drive letter shows up, usually F:\ but it's not mounted.
When I pull down the settings menu, it says that USB is connected and that's about all.
I will unplug my phone, replug it back in again invoking the USB menu only this time, I will hit the "Home/House" button, or the "Back" button which will take me to the home screen.
I will drag down the settings menu like before, only this time under the USB box, when pressed it gives me the option to mount which if pressed, mounts the phone and gives me the ability to access it.
So whats the problem? It's very inconsistent. It doesn't always do that. Sometimes I have to unplug and replug my phone in to invoke the mount USB option.
My questions are these: Is anyone else having the same issue? Am I just not using this correctly? Is there any simple way to just "mount usb"? An app or perhaps a function that I'm not seeing?
Thanks!

Out of box, you always need to manually mount the drives once connected. It does not auto-mount. I was told there is an app that can auto-mount for you.
If you're running 2.1 firmware, the mount option is in notification area. If you're running 2.2 firmware, there will be a USB mass storage screen where you can click on the mount button.

That's fine manually mounting the drive, my question is: How do I mount the drive if there is no way (that I can find) that gives me the option except for the seemingly random "mount USB" box that comes up 7/10 times in the drop down settings dialogue?

It comes up 100% for me.
Sent from my SAMSUNG-SGH-I897 using XDA App

Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.

It comes up randomly for me too. I didn't have this problem on 2.1 Eclair. It isn't anything crippling, but it is annoying. It happens half the time for me.

I should mention too, that i am running Eclair 2.1.

boe_dye said:
Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.
Click to expand...
Click to collapse
Nothing special. Plug in the USB cable and go to notification area to mount the USB drives. I do configure my phone to prompt for USB mode everytime I connect.
You may want to try different USB ports on your PC.

My buddy has a Captivate that mounts fine in mass storage mode, except it brings up the windows dialog box saying "no disk in drive: Retry?" every time. It doesn't fail to work or anything, the sd card is accessible without any problems. It just throws up that dialog every time. It's rather annoying. Anyone seen this before?

Change it to "ask" instead of be "Mass storage" every time. I bet it'll work.
You might find that then changing it back makes it work again. Otherwise just leave it at "ask".

i never had it work in ask on connection mode, and it annoyingly always wants to launch kies no matter what setting i use even after messing with the setting in windows. i have more success with the phone in debugging mode and mounting from the notification menu. it may be that the other options wont work in debugging mode and the computer isn't trying to mount it as an mtp device because of kies.
if i was still on eclair id test it to make sure, my memory gets alittle fuzzy. froyo seems to work better in that area.

Your saying you just get "USB connected" instead of the norm "USB connected, select here to copy files to/from your computer" in the blind menu?
Happens to me as well. Usually if I reboot both the computer and phone I'm good to go. I didn't have the problem on 2.1.

The method that has never failed for me is to turn on USB debugging. Then when I connect the USB, I always get the second notification in the pulldown screen with the text "Select to copy files...". Clicking that brings up a box to mount (or some less vague word choice in 2.2), and accepting that always works to show the 2 drives on my computer.
USB debugging completely circumvents the USB settings panel. You can either use one or the other, not both. I have always found the USB debugging approach to be totally reliable. Right now on Cog2.2 Beta6 both approaches work fine, but I usually leave USB debugging activated for other reasons so I use that method by default.

USB connection problem, connection type screen does not appear

When i'm connecting my phone via usb, choose a connection type screen does not appear and i cant select the "disk drive" or "charge only" options. When i tap to change usb settings, it sends me to "portable hotspot & tethering"
Windows recognizes usb device
Phone is stock, some days ago updated to android 4.1

Try disabling usb debugging. On my Blade I have to do that if I want to mount it as usb storage.
My S and tablets doesnt need that though, but might be worth a shot.

Hmm interesting my phone turns usb debugging automaticaly on when i connect my device, tried hard reset, problem still remains

I see. I read about someone else having the same issue on JB. I guess its a bug or something.
I guess you either have to flash a custom rom or wait for an official update.
In the mean time, you could always use quick adb pusher. Much better than mounted usb storage (requires a working adb connection, which you should have if you have installed htc sync)