When i'm connecting my phone via usb, choose a connection type screen does not appear and i cant select the "disk drive" or "charge only" options. When i tap to change usb settings, it sends me to "portable hotspot & tethering"
Windows recognizes usb device
Phone is stock, some days ago updated to android 4.1
Try disabling usb debugging. On my Blade I have to do that if I want to mount it as usb storage.
My S and tablets doesnt need that though, but might be worth a shot.
Hmm interesting my phone turns usb debugging automaticaly on when i connect my device, tried hard reset, problem still remains
I see. I read about someone else having the same issue on JB. I guess its a bug or something.
I guess you either have to flash a custom rom or wait for an official update.
In the mean time, you could always use quick adb pusher. Much better than mounted usb storage (requires a working adb connection, which you should have if you have installed htc sync)
Related
I seem to be encountering a slight inconsistency in regards to mounting the phone unto my windows 7 box.
Essentially what happens is this: I plug my phone into the computer and the little dialogue box pops up onto my phone (Kies, Mass Storage, PC Internet etc). I push "Mass Storage" and ideally what is supposed to happen is that the phone mounts onto windows.
Unfortunately it doesn't seem to mount.
What does happen is that the drive letter shows up, usually F:\ but it's not mounted.
When I pull down the settings menu, it says that USB is connected and that's about all.
I will unplug my phone, replug it back in again invoking the USB menu only this time, I will hit the "Home/House" button, or the "Back" button which will take me to the home screen.
I will drag down the settings menu like before, only this time under the USB box, when pressed it gives me the option to mount which if pressed, mounts the phone and gives me the ability to access it.
So whats the problem? It's very inconsistent. It doesn't always do that. Sometimes I have to unplug and replug my phone in to invoke the mount USB option.
My questions are these: Is anyone else having the same issue? Am I just not using this correctly? Is there any simple way to just "mount usb"? An app or perhaps a function that I'm not seeing?
Thanks!
Out of box, you always need to manually mount the drives once connected. It does not auto-mount. I was told there is an app that can auto-mount for you.
If you're running 2.1 firmware, the mount option is in notification area. If you're running 2.2 firmware, there will be a USB mass storage screen where you can click on the mount button.
That's fine manually mounting the drive, my question is: How do I mount the drive if there is no way (that I can find) that gives me the option except for the seemingly random "mount USB" box that comes up 7/10 times in the drop down settings dialogue?
It comes up 100% for me.
Sent from my SAMSUNG-SGH-I897 using XDA App
Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.
It comes up randomly for me too. I didn't have this problem on 2.1 Eclair. It isn't anything crippling, but it is annoying. It happens half the time for me.
I should mention too, that i am running Eclair 2.1.
boe_dye said:
Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.
Click to expand...
Click to collapse
Nothing special. Plug in the USB cable and go to notification area to mount the USB drives. I do configure my phone to prompt for USB mode everytime I connect.
You may want to try different USB ports on your PC.
My buddy has a Captivate that mounts fine in mass storage mode, except it brings up the windows dialog box saying "no disk in drive: Retry?" every time. It doesn't fail to work or anything, the sd card is accessible without any problems. It just throws up that dialog every time. It's rather annoying. Anyone seen this before?
Change it to "ask" instead of be "Mass storage" every time. I bet it'll work.
You might find that then changing it back makes it work again. Otherwise just leave it at "ask".
i never had it work in ask on connection mode, and it annoyingly always wants to launch kies no matter what setting i use even after messing with the setting in windows. i have more success with the phone in debugging mode and mounting from the notification menu. it may be that the other options wont work in debugging mode and the computer isn't trying to mount it as an mtp device because of kies.
if i was still on eclair id test it to make sure, my memory gets alittle fuzzy. froyo seems to work better in that area.
Your saying you just get "USB connected" instead of the norm "USB connected, select here to copy files to/from your computer" in the blind menu?
Happens to me as well. Usually if I reboot both the computer and phone I'm good to go. I didn't have the problem on 2.1.
The method that has never failed for me is to turn on USB debugging. Then when I connect the USB, I always get the second notification in the pulldown screen with the text "Select to copy files...". Clicking that brings up a box to mount (or some less vague word choice in 2.2), and accepting that always works to show the 2 drives on my computer.
USB debugging completely circumvents the USB settings panel. You can either use one or the other, not both. I have always found the USB debugging approach to be totally reliable. Right now on Cog2.2 Beta6 both approaches work fine, but I usually leave USB debugging activated for other reasons so I use that method by default.
I am having trouble getting my Thunderbolt to mount as USB drive. I have checked usb debugging in settings. I am on Win 7 32 bit. When I go to device manager, I see the ADB device with a yellow triangle, which means I need the drivers? Can anyone help here?
Thanks,
It should have nothing to do with ADB, Drivers, or Debug mode. On your phone in the notifications area you should also see an option to mount as USB drive, or Enable USB storage. Once you enable that it will mount on your windows machine like a USB thumb drive.
I know, never, had an issue with my Dinc, I am pretty computer saavy. This just won't connect.
In settings make sure that you have the "Ask On Connection" option checked.
Settings>Wireless and Network>USB Settings>Ask on Connection
Pull down screen - tap usb connection - pick the one you want
Make sure the correct version of HTC Sync has been installed. It's how I fixed mine.
http://member.america.htc.com/download/RomCode/Sync3/setup_3.0.5511.exe
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
So I can't connect my Droid RAZR to my windows 7 machine...
I have tried a lot of things!
I've tried:
*Different computers including Vista and Linux
*Different cables
*Different fastboot files
*Re-installing drivers
*Factory reset
*PIM sync from the market etc.
What happens when I plug my phone into my PC is the computer recognizes it, it makes a sound, then it says Unknown Device connected or some times it says USB malfunctioned and then on my lockscreen it says the phone is charging but it doesn't show on my battery icon.
Whats also interesting is if I got into Fastboot mode and connect to my computer it says USB connected and then I can use it in RSD with no problems.
I'm on ICS with no root.
Please help!
Sent from my Nexus 7 using XDA Premium HD app
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
I had the same prob with my S3... Tip from Post above solved my problem...
neomeone said:
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
Click to expand...
Click to collapse
Thanks but I've already tried that
Jeanjacq said:
Thanks but I've already tried that
Click to expand...
Click to collapse
With the phone plugged in, have you tried opening up the lockscreen so you can get to your phone? Please take a screenshot of the device manager settings.
Computer Management -> Device Manager -> Find the device (double click on it) -> Details -> Hardware Ids
Or you can write out what the hardware ID is. Thanks.
YOu said you also tried it in linux. please post the output from lsusb for any unknown devices
Huawei Mercury
I am also having a similar issue with the pc not recognizing the phone. I never had an issue with this problem. I have only rooted my phone with no custom room. I have always connected my phone to the pc and was giving a connection screen on my phone asking me if i want to connect as a mass media storage. A week ago this behavior stopped. I don't know what to do anymore. I don't remember doing anything to the phone to mess up the setting? I connected it to several computers using different micro usb data cables and nothing occurs.
The only thing happens is my phone receives a charge from the computer and thats it. Any ideas? Is there anyway i can reset the system or what not?
quickser4u619 said:
I am also having a similar issue with the pc not recognizing the phone. I never had an issue with this problem. I have only rooted my phone with no custom room. I have always connected my phone to the pc and was giving a connection screen on my phone asking me if i want to connect as a mass media storage. A week ago this behavior stopped. I don't know what to do anymore. I don't remember doing anything to the phone to mess up the setting? I connected it to several computers using different micro usb data cables and nothing occurs.
The only thing happens is my phone receives a charge from the computer and thats it. Any ideas? Is there anyway i can reset the system or what not?
Click to expand...
Click to collapse
same problem here with my S3 mini can anyone help? please
neomeone said:
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
Click to expand...
Click to collapse
me also facing same problem and already i turned on USB Debugging mode but nothing happened. still i can't connect USB mass storage of my android device
Hey guys what you should try to do is use this :
after pluggin in your devices and removing their current driver in device manager(control panel>admin tools>computer management>device manager>
and then install this
http://adbdriver.com/upload/AdbDriverInstaller.exe
also make sure you adb debugging is enabled (if it's not visible(setttings>about/info>build number tap it multiple times) usually its settings>dev options>usb debugging.
also maybe try using this software as pc suite myphonexplorer
Can you guys go to the storage menu in settings, press the menu key, select USB connection mode (or something like that) and play around with the settings in there? Try that out.
Sent from my Nexus 4 using XDA Free mobile app
Is there any way to save the USB connection type when plugging the phone to the PC? Specifically MTP. I'm on the Verizon variant, unrooted.
Right now, when I plug it in, it comes up with "Connected as installer" and the Verizon Mobile cd drive thing gets mounted. If I wait it out or if I manually go into the phone and swipe down notifications to change the type to Media device (MTP), the phone mounts. Problem is, the next time i plug in the phone again, I have to either wait it out again or select MTP again. Is there a way to save it to the MTP option? First time on a Samsung phone and not sure if it was just like this since the beginning of time or what.
I get the same thing as well, and sometimes it wont do anything at all unless I unlock with my fingerprint. Auto MTP mount option or app would be nice.