Database Info

[Q] Root Problems

I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?

eshewski said:
I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?
Click to expand...
Click to collapse
You need to be patient. the program stopped responding for nearly 5 minutes for me before it started going again and my PC is lightning fast.
Try installing Samsung kies. Should give you all the drivers you need.
If your computer doesn't recognize the phone at all then you most likely dont have the drivers installed correctly or a USB hub driver issue in which case no USB devices would work. Like I said, try installing kies. Once you can get the PC to recognize the phone as a storage device, you should be good to run the root program.
Sent from my SAMSUNG-SGH-I727 using XDA App

I tried Kies already and it didn't help. I can connect my Vibrant with no problem to my computer as well.

eshewski said:
I tried Kies already and it didn't help. I can connect my Vibrant with no problem to my computer as well.
Click to expand...
Click to collapse
Can you connect other USB devices to your computer? USB drives etc
Sent from my SAMSUNG-SGH-I727 using XDA App

i had somewhat the same problem , I rooted my old vibrant first incase i screwed something up , no big loss , it went smooth as butter , then I hooked the SR up and it took forever , 3 try I unplugged alot of my other usb devices , restarted the pc and tried , it hung for a few minutes and I left it alone , it eventually worked the last time. I also have a pretty solid pc , running win7 64bit , unplugging alot of my usb devices seemed to be the thing that really helped.
hope that helps ya

eshewski said:
I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?
Click to expand...
Click to collapse
rooting this device is easier then posting that on the forum =)
1) If you are still 2.3.5 (and didn't do the OTA upgrade) -> use doomlord's script (DooMLoRD_v3_ROOT-zergRush-busybox-su) or newer if there is one:
-if you did do the OTA upgrade - search the forum for another way to root.
2) install KIES (if its installed, continue to 3)
3) extract the DooMLoRD_v3_ROOT-zergRush-busybox-su.zip to anywhere (maybe c:\doom )
4) open a command prompt (run as administrator if your not running windows XP)
5) goto c:\doom\files\
6) type "adb devices"
- if it finds your device - just run the script , it will root your phone
- if it does NOT find your device, troubleshot kies (uninstall it, reboot, reinstall, disable anti virus/firewall, etc etc) because if it can't find the device then the problem is someplace on your computer.
good luck!

Please help me with download mode!!

Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.

Nvm
10c

1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App

i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!

Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click

Should I uninstall the samsung drivers prior to using Heimdall's One-Click?

Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.

Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.

Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.

didn't work...

You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.

***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.

Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!

2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App

Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.

[Q] LG USB Driver won't install successfully

Okay I have search XDA and LG AND google search for this problem and have not found any solution to what I'm going through. Here's a little background on my phone
T-Mobile G2x rooted with the ROM HellFire Phoenix V2.1
Before today I was able to mount my SD card to my computer with no problem seeing I've had the phone since it came out. Today my computer showed it was installing the drivers but gave me a message "device drive was not successfully installed...usb composite device failed. Now I have used different usb ports and different usb cables and my computer is STILL giving me the same message!
I have even uninstalled the drivers and reinstalled them and still coming up with the same issue. I even restarted my computer after each and I keep coming to the same issue. Can someone please give me a solution to this frustrating problem? It would be greatly appreciated!

Same exact issue except on 2.2
I think you mean HFP, hfs is only up to 1.7
Sent from my LG-P999 using XDA

What about USB debugging is it checked? try the opposite of what it is with a reboot, also link where the drivers are being downloaded from.
Sent from my LG-P999 using xda premium

mt3g said:
What about USB debugging is it checked? try the opposite of what it is with a reboot, also link where the drivers are being downloaded from.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Yeah I made sure USB debugging is indeed checked, and when you say try the opposite meaning what? uncheck debugging...reboot then check it again?
The drivers are being downloaded from the LG Mobile Support tool program that downloads and installs the latest drivers. Which can be found here http://www.lg.com/us/support/mobile-devices/phone-support
I even posted on the LG forum as well, got a response from an employee who told me basically what I had been doing, uninstalling , restart the computer, reinstall, restart again and then connect my device and STILL the same message. I have no idea why its doing this, its never done this before unless there was a new Windows update or something but there hasn't been. Oh and my Windows is Vista by the way in case anyone was wondering.

I used B2CAppSetup.exe From LG. I was having the exact same issue, this solved it. I uploaded it here: http://www.mediafire.com/?e2vnaw5a0ljljj4
EDIT: Vista or Seven - make sure you right-click the .exe and Run As Administrator.

I had the same issue with HFS so I just started taking the card out of my phone and putting it directly into the computer.

I had this issue a while back after re-installing the drivers. Plug the phone in and the little systray icon would tell me the usb composite device failed.
What worked was going to the device manager and installing drivers from there, but instead of browsing to the drivers as I tried many times the solution was letting Windows choose. It popped up with two choices the generic usb composite device and the LG phone. Picked the phone and I was good to go.
Hope this helps someone and if it does please hit the thanks button.

TorrentzRock said:
I used B2CAppSetup.exe From LG. I was having the exact same issue, this solved it. I uploaded it here: http://www.mediafire.com/?e2vnaw5a0ljljj4
EDIT: Vista or Seven - make sure you right-click the .exe and Run As Administrator.
Click to expand...
Click to collapse
Thats the exact program I have been using and I still have the same issue, I'm thinking of just going back to another ROM since it seems to be an issue with HFP then I'm glad to hear I'm not the only one with this issue.

On the stock ROMs you had to set it for USB file sharing only and then actually enable file sharing once it's plugged in. I can't try anything but a stock ROM (running BB 3/2012) at the moment.
Not sure if HF is the same way.....

Antivirus
Once I had driver issues because of an overzealous Antivirus. Try uninstalling the drivers, restart, disable the antivirus, and reinstall.

I have a question for you guys, I tried restoring to a previous Hellfire ROM i backed up thinking that would work and it didn't.
So what happens if I can't get this to work? Without me being able to access my external/internal SD cards I can't load a new ROM or anything even if i wanted to unroot the phone and get another one from T-Mobile I can't or can I?
Is there any other way to restore back to factory settings without connecting to my PC? This is highly frustrating and i have NO idea why my phone and PC aren't working together like they did before in the past.

Did you run as administrator?
Sent from my SGH-T989 using xda premium

Yes i have done everything. Run as administrator, restarting my computer after every uninstall and re-install of the drivers, made sure USB debugging was checked, even restored a previous ROM i saved thru clockwork-mod and when i connect the phone through the USB to my computer i keep getting the USB composite device failed.
Nothing seems to work, so I'm thinking of just accepting that its not going to work and save up and get a new phone eventually which sucks cause since rooting the G2x I love it more than when it was stocked.
quest4fire said:
Did you run as administrator?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse

Sometimes switching cables help. Once i used a blackberry micro hdmi cable and had problems until i switched to a LG cable. Also running Win 7 in win xp mode helps.
Sent from my SGH-T989 using xda premium

quest4fire said:
Sometimes switching cables help. Once i used a blackberry micro hdmi cable and had problems until i switched to a LG cable. Also running Win 7 in win xp mode helps.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Tried that already still doesn't work and I'm on a Vista computer don't have access to Win 7 so suggesting that won't help at all.
Sent from my LG-P999 using XDA

Ok mshoney6, Here is your solution: (you can thank me later)
After much digging and searching, searching, searching I found this driver and I uploaded it for you. Get it HERE: http://www.mediafire.com/?ahc3iklqmoa0gnc
First, go to your control panel > add/remove programs > and uninstall ANYTHING LG! This includes the Mobile Support Tool.
Second, make sure your phone and USB cable are not connected to your pc.
Now, right-click the file you downloaded above and "Run As Administrator".
DONE! Connect your phone to the PC and Viola!

[Q] Did I brick my phone? [Solved]

Hello all,
Firstly thank you for the great development and help the community is providing for GS4G. From the time I bought this phone (few weeks ago), I have been playing around with different ROMs. I try GB roms and ICS roms every now and then. Always go back to GB using 1 Click's.
Yesterday when I was going the 1-Click Heimdall, it failed in between with some error. After this, I am unable to boot into the OS or recovery or download mode. It comes to a screen which tells me that the firmware upgrade was interrupted and asks me to use recovery in Kies. I tried this, but Kies does not even recognize my phone anymore. Windows shows my phone as "unknown device". I tried uninstalling and re-installing Kies, but still no use. I hope there is some way to get my phone back.
I read somewhere about a USB Jig that could get you into download mode. I have ordered it from Amazon and it may take a couple of days. Meanwhile, if any of you can help, it would be great. Thanks!

youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.

gs_0523 said:
youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.
Click to expand...
Click to collapse
Thanks. I had tried eollie's Heimdall Stock KJ6 + Root. But, I don't remember seeing the driver installation window show up. I tried reinstalling the drivers through Kies couple of times and re-booting. But, still didn't work. I will try what you suggested when I get home.

You should be able to fix it. Goodluck

When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium

TwitchyEye said:
When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
When I connect my phone, Heimdall does nothing but says "disconnected". Windows shows that "a device has malfunctioned" and shows "unknown device connected".

Do you have the full heimdall?
Sent from my SGH-T959V using xda premium

TwitchyEye said:
Do you have the full heimdall?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I used this Heimdall - http://forum.xda-developers.com/showthread.php?t=1822626
I do remember installing drivers through this Heimdall before when the phone was working.

pmattie said:
Windows shows that "a device has malfunctioned" and shows "unknown device connected".
Click to expand...
Click to collapse
Sounds like you need to run zadig.exe in the Drivers folder of the Windows distribution of Heimdall.
If that doesn't work, right-click on (My) Computer, select Manage, then select Device Manager. In the panel that opens, find your device, right-click on it and you can then look at its properties and potential change the driver there.
(Yes, this kind of shenanigans is another of the reasons I really dislike Windows)

Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
http://forum.xda-developers.com/showthread.php?t=1358498
The downloads in this post will also get you where you wanna go
Somebody tell me if I led this guy wrong
Lol ya beat me to it!
Sent from my SGH-T959V using xda premium

TwitchyEye said:
Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
...
Click to expand...
Click to collapse
I tried all this. But, still Zadig shows my phone as "unknown device" and does not install drivers for it. Tried USBDview to remove any instance of Samsung & Android from the drivers. But, still does not recognize my device. Any other suggestions.

Try different USB ports on your computer.
Install Ubuntu (not totally kidding on that one, it will install side-by-side with Windows)

When is that jig getting there? One time I had a similar situation and I built myself a jig and it worked like a charm. Phone goes straight into download mode. I dunno if this will resolve your situation but I'm pretty sure this isn't the first time we've seen someone with this problem and then after trying several different computers and USB cables we usually say maybe your phone's USB Jack is messed up? And then the thread goes dead.
Sent from my SGH-T959V using xda premium

Have you uninstalled any drivers? Download and install the drivers from the bible thread if you haven't. Like suggested, try different USB ports and different USB cables. Sometimes it takes more than one try for some reason.

pmattie said:
Any other suggestions.
Click to expand...
Click to collapse
Have you rebooted your comp at all?? If no that might be the problem.

SUCCESS !!
Thanks a lot for all your suggestions.
Here is what worked:
- I opened device manager and uninstalled ALL USB devices (Yes ALL, not just Samsung, Android etc) and unfamiliar Storage devices.
- Then I rebooted once so that all other device drivers could be installed.
- Then I rebooted a second time and let it install any remaining drivers.
- Then I plugged in the phone and it installed the driver and now it started showing the correct device name
- Now, I ran the Heimdall 1-click and it opened offered to re-install drivers. I did this.
- After all this, I was able to get 1-Click GB rom installed and now back to VB.
(I think the key was "uninstall all USB devices" and "reboot TWICE")

glad you got it to work. ive had my share of soft bricks with this device and it always takes something different to get it to run right. im starting to think that my computer is alive because of this reason because it just doesnt like to play nice sometimes. LOL

Odin setup connection

Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:

Kris1107 said:
Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:
Click to expand...
Click to collapse
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number

drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?

android n said:
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?
Click to expand...
Click to collapse
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!

drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
drago10029 said:
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!
Click to expand...
Click to collapse
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me

android n said:
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me
Click to expand...
Click to collapse
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!

drago10029 said:
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!
Click to expand...
Click to collapse
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873

android n said:
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873
Click to expand...
Click to collapse
You can try redownloading Odin and also running Odin as an administrator, that's been the case one in a while. lastly uninstall and reinstalling drivers could help. If this does'nt do it sorry, I'm all out of ideas.

I have same problem with Odin v4.42 and work with Odin3_v3.04,try different version of Odin.