hey guys i am looking for a template for the individual keys of the transformer that is printable in 8.5X11 that is 1:1 true size....i am going to get my decal printer to print key overlay decals to add a little color to the other wise bland tf
so can anyone help me
and while i am at it can some one help with the actual table too more then just 171X271
Related
Hi,
I thought I would be able to crack this one for myself. But somehow I can't get it to work.
I would like to make some Camera Templates of my own. However the "how to" descriptions I have found won't work even though they should.
This is what I have done:
I made a animated gif (using Gimp I was able to see the structure of the deliverd templates)
The first picture (in the animated gif) is the template with a black area for the actual photo
2 The second layer is an empty transparent layer
3 This is a transparent layer with a a black area for the actual photo surrounded by white.
What happens is first I don't see any open arears while taking a picture. After taken a picture anyway the photo will be shown but not in the arears that I want wanted it to bb.
What am I doing wrong?
I have googled for two nights now and I have tried several ways to create this (GIMP and Photoshop CS3) I'm on some kind of track but is it the right one? This shoud have been so easy to create right?
Regards,
AJ
I cracked it ;-)
The secret is in how you save it.
This is how you do it:
Make sure that the background is set on transparent.
Take any picture and cut out for example a hole for the face by making this area black.
Make a second layer and make the same area black
Now draw a white line around this black area (not sure if you really need to do this so try it out)
Now create an animated gif that only runs once.
Now the big secret, I use Photoshop for this example but you'll probably regonize these settings for other programs
color reduction: Windows
dither algorythm: Pattern
Transparency: No transparency dither
Interlaced
Colors: 256
Matte (I made this black play around with it to see what happens)
Web Snap 0% (if you change this you get a more ghostly effect)
Regards,
AJ
These kind of things are very easy to make.
Just go to a website. Print screen it and past it in the 640 x 480 canvas. Then modify it until it is to your satisfaction.
Use the rectange tool to create the black area that will be used as the hole for the picture.
Now duplicate the rectange and go to "Layer Style" choose "Stroke" and make a white outside stroke of 1 pixel.
Now all you need to do is create an animated gif.
Go to "Windows" and choose "animation"
Make 2 frames in the animation box.
The first one is the picture with the black area
The second one is nothing but the black area with the white stroke, and save this as an animated gif.
color reduction: Windows
dither algorythm: Pattern
Transparency: No transparency dither
Interlaced
Colors: 256
Matte black
Web Snap 0%
Regards,
AJ
this is awesome lol. My wife will love the baby pictures with a frame.
@mallman
Perhaps you should show this one instead
ajvdn said:
@mallman
Perhaps you should show this one instead
Click to expand...
Click to collapse
Hi, I'm sorry for this noobish question, but where do these things go?
I saw somewhere on the internet that there should be a couple of "beeldthema's" or templates standard on this phone, but I only have the one of "Woman best buy top 10" and "MAN Person of the year" (this is 1 template with 2 pictures)
Is there a website where i can download these templates the other touch pro's have? I saw there was one on some Touch Pro's with a cook and some others too.
Thanks in advance
Hi, Ali3nSt0rm
On the Touch pro, and my gues is on the Diamond as well these things go in "my documents" "Templates"
(dutch)of "mijn documenten" en waarschijnlijk heet het in het Nederlands ook template en anders iets van Beeldthema ofzo.(/dutch)
Or you could just search your device for gif files and you'll find the spot where to put them.
For the internet:
Search for "camera templates" and you'll find lot's of free templates (like this one: http://xda-v.6te.net/)
You can also Google: [camera template site:xda-developers.com] and find a lot more templates.
Regards,
AJ
HTC PRO photo templates...
What do I have to do so I can get a photo template to you, you know like putting someone's face in a magazine cover or in a landscape, etc...????
Please help me,
Thanks,
Mark
ajvdn said:
These kind of things are very easy to make.
Just go to a website. Print screen it and past it in the 640 x 480 canvas. Then modify it until it is to your satisfaction.
Use the rectange tool to create the black area that will be used as the hole for the picture.
Now duplicate the rectange and go to "Layer Style" choose "Stroke" and make a white outside stroke of 1 pixel.
Now all you need to do is create an animated gif.
Go to "Windows" and choose "animation"
Make 2 frames in the animation box.
The first one is the picture with the black area
The second one is nothing but the black area with the white stroke, and save this as an animated gif.
color reduction: Windows
dither algorythm: Pattern
Transparency: No transparency dither
Interlaced
Colors: 256
Matte black
Web Snap 0%
Regards,
AJ
Click to expand...
Click to collapse
anyone having problems using the JetCET5 app and an HP color laserjet? i only get horizontal lines printing out for both test pages and actual documents.
was looking forward to this nice app...
Ok so I posted some bit's of this already but I have refined the original "Proof of concept" design to something a bit more useable.
It annoyed me that I could not see the buttons in Landscape mode but I could see the sides of the screen when it is set to Autoscale. This set me to try and make a pad that would fit into the tiny slivers of screen left in landscape mode with "Autoscale" set.
This pad needs to be used in "AutoScale" mode on a WVGA screen such as an HD or HD2 This setting leaves a slither of screen each side of the screen that I have used to show the button placement. Don't get me wrong, you can't fit a Dpad in that area BUT you can easily mark top and bottom left of it and that's a start.
I find that my thumb is a bit lazy and I struggle a bit to use a square DPad, because of this I have squished it a bit to a more suitable rectangular shape, have a go and tell me if it's no good - If you imagine that the visible "strip" at the side is 1/4 of the DPads width then you should get it pretty easily. Please take a look at the attached picture though, I have made this pad a slightly odd shape because I find that I use left and right a cack load more than I use up and down. It may not be great for all games but I have found that it suits my thumb better than a standard equal layout. If you hate it then try using my original pad found here: http://forum.xda-developers.com/showthread.php?p=6339454#post6339454
Other than this the Start (ST) Select (SE), A, B, R1 and R2 buttons are all visible at the edge of the screen!
Currently the GBA pad is the only one I have done but I could easily modify this concept to cover all of the different systems - The only reason I haven't is that I only really play GBA games on my phone.
There is a readme included but I'd like some feedback so please bring it on!
Hey man, good job. I like the v1 rather than this, i find it harder to hit the up arrow with the new one, but it's not the reason why i'm wiriting this.
Both your pads makes the game laggy when i tap the white (unassigned) space. Other pads I've tried never did that. Any idea how to selve this? Or am i the only one experiencing this lag?
is multitouch available for morphgear?
Phenomenon said:
is multitouch available for morphgear?
Click to expand...
Click to collapse
It sure is you just need to download the tweaked version by blutz
xZdenis said:
Hey man, good job. I like the v1 rather than this, i find it harder to hit the up arrow with the new one, but it's not the reason why i'm wiriting this.
Both your pads makes the game laggy when i tap the white (unassigned) space. Other pads I've tried never did that. Any idea how to selve this? Or am i the only one experiencing this lag?
Click to expand...
Click to collapse
Hi I find that they all lag a bit, it seems to be the way that the Multitouch is implemented (I don't think it's Blutz, rather the original Morphgear crew), I find that when I have 2 buttons pressed all is fine but if I press NE and A (so 3 buttons reported to Morphgear) it lags until I release all buttons. This is just my laymans observation.
I could try producing an ultra light version to see if that helps... I think my skin is >2mb
Could you give me some examples of ones that don't cause it and I'll have a look, I wouldn't be overly surprised to find it was something I had done wrong. What we really need is the capacity to set white = NULL!
I've done a cursory search looking for something like this but have been unable to find something...
Does anyone know if there is an app/keyboard replacement which has a screen much like the gesture search screen, allowing a person to draw individual letters and have them placed into the input box? Yes, it has shades of Graffiti (from the-company-which-shall-not-be-named), but would make typing while the unit is in a car dock, or just when standard keyboards are a pain in the ass, much easier.
I can't believe something doesn't already exist, so I turn to all of you.
Help me, XDA, you're my only hope.
+++++++++++
N1, CM6
+++++++++++
Well, it would appear something kind of comes close ... graffiti or stroke keyboard work, tiny input area. But MobileWriter looks to be very much along the lines of what I had envisioned, but does anyone know of something with the same sized writing area which doesn't cost 5 bucks?
I'll get mobilewriter if nothing turns up, but hey...free is cheaper than 5
Thanks!
Graffiti has been ported to Android. Search for it in the Market.
The input box is still quite small. I'm thinking of something where one could essentially be inputting with one hand (using the thumb of the hand holding the device) without even needing to look at it, so a large forgiving graffiti area would be best. Thanks for the tip though.
Ok so I just setup my classic printer through my PC to the Google Cloud Print service so that I can print stuff from my Nexus 5. I think I've found a bug. When i went to print a word document from Google Drive on my Nexus 5, I choose to print it in Black & White in the print dialog but the document still printed in color. From what I understand the printing feature from Kit Kat converts doctments, pictures, or whatever into a PDF file which is then sent to the printer. It it would be my understanding that when you choose Black & White in the print dialog, it should create a Black & White PDF file of whatever you are printing and send that to the printer. So unlike a normal printer when you tell it to print in black & white, you are creating a black & white PDF instead of changing the actual printer settings to Black & white....
Can someone else please try to print a color document from your phone and choose the Black & White option to see if it still prints in color for you too?
Bump