Before i flashed to clockwork mod i was able to flash to my stock rom and everything would be peachy with the drivers and all. but when i flash to any of the new roms my phone cant be identified and doesnt even show up on the device section. i have searched and searched for the drivers and the ones i find dont work. i think the roms have something to do with it, like they are for a different device but i know they arent... now i cant flash back to my stock rom to just be able to sync up with my phone cause recovery doesnt recognize my file as a correct file to update with. thank you if anyone can help. ive read alot about others having this same problem
Related
Hey guys. I just got this chinese tablet that is really god at hardware level but i cant install his drivers on my computer. Already searched in many sites but none of the drivers founded were good, can someone help with this one? Does someone have one of this? (is not the deluxe version)
Cheers
For what purpose do you want to connect it to your PC ?
To flash another rom, update to ics.
When i put the tablet into flash mode and plug in to the pc, it tries to install the drivers but dont succed.
I've tried some drivers that i found but nothing. (i saw some good stuff on http://www.slatedroid.com/topic/24356-window-n12-firmware-extracted-rooted-and-slightly-customized/ but i cant donwload the files, forum is too confuse)
P.s: plugging with tablet on it works fine but with access to files.
Im looking for help on fixing my SGS4G.
Here is the current list of problems:
1. Phone isnt recognized when i plug it into any computer (i download all the drivers, Kies and Odin both cant find it, and 1 out of every 10 tries my computer will recognize the microsd card and treat it like a normal sd card)
2. My Dialer and Messages will open for 3-4 seconds and close without a force close screen or anything. Obviously this is really annoying :|
3. Im rooted but trying to go back to stock to redo this whole process over is becoming a pain.
4. When trying to flash a custom rom from ROM manager i get the signature verification failed message.
Im about to try the heimdall one-click package to get back to stock and see if that works...idk if it will find my phone though.
My system info:
Firmware: 2.3.6
Baseband: T959VUVKJ6
Kernal: 2.6.35.7-T959VUVKJ6-CL694130
Build: GINGERBREAD.VUVKJ6
If i manage to get back to stock/unrooted where do you guys suggest i go from there? im kind of out of the loop as far as where we are with ICS or jellybean or any of that :|
Thanks a bunch in advance and sorry if this is nooby
Also:
adb devices shows nothing :\
USBDview shows nothing for my phone...i plug it in with debugging on and all it does is charge my phone
First problem. Do not use ROM manager. Download ROM zips and flash through CWM/TWRP.
Have you tried using a different cable when connecting to PC? Some cheaper cables do not work well, or at all. I have a blackberry cable that I only use for this.
Have you tried alternate USB ports. Sometimes that may be this issue as well. Also, some people have better luck with Odin, while others have better luck with heimdall. You may want to try the alternate and see if you have the same issue.
I would follow the guides on going back to stock. You may have old conflicting drivers so you may need to completely remove old ones first.
Sent from my SGH-T959V using xda app-developers app
I use the cable that came with it and the one that comes with my girlfriends phone which is a different phone with no problems. You might want to mess with the usb configuration on your computer
Sent from my SGH-T959V
As far as the dialer and messenger app backing out automatically that was an issue with all bml gingerbread roms. I think there was a fix but I'm not sure. Cm7 is mtd based gingerbread and it doesn't have that problem.
Sent from my SGH-T959V using xda app-developers app
Jiggly,
Ive tried every USB port on my desktop and my laptop. Both of them im reinstalled the drivers on. On my desktop the moment I plug it in it says the device malfunctioned.
Usbdview didn't show anything like the guides said it should. (HTC something...there was.nothing)
ROM manager is just on my phone ive never actually used it other than to boot to recovery
Sent from my SGH-T959V using xda app-developers app
The phone goes into download mode but heimdall still doesnt detect it, windows still tells me the device cant be recognized and im out of ideas.
i went into regedit and deleted all the samsung folders and reinstalled the drivers fresh but im still not getting anywhere...
flash the blastoff kernel, or some custom GB kernel.
Let it convert to ext4, it'll take 10 minutes,
flash a rom through CWM which you will now have.
Im missing something here...but i cant flash anything as everything is unsigned and i cant get out of 3e recovery. ODIN, heimdall etc still wont find my phone from my computer(s) and everything i attempt to flash is unsigned.
Can you boot into your ROM?
boot into my rom as in use my phone? yes the phone functions fine with the exception of not being able to plug it into my computer to tether it/use mass storage and these darn auto close problems with my dialer/messages
Well i was able to flash a new kernel with CWM then upgraded to cm9.
didnt realize contact sync didnt work so i lost all that info :\ computer still says the device malfunctioned but my messaging and dialer apps dont auto close now lol
Hello everyone, i have a very big problem with my phone.
First of all, i have searched all over the internet to find a solution and yet there is none.
So my problem started to be that i have done something wrong while flashing MIUI and i could't do anything, not even recovery or anything, the only thing working was to get into the "S/W Upgrade" mode... Now i have read that in this mode you are able to flash to stock rom, via tools like nvflash and smartflash etc. what i do is then install the APX Drivers, and the phone is detected in Device manager. Fine.
Then i try using all kind of tools, and some says that they can't find any usb devices at the port, and smart flash says "We can't communicate with specific port" So i search all over and can't seem to find a solution, it's like no one have ever tried this before.
And just for the record, i have used guides from here to flash to stock rom, so i can't see what im doing wrong.
I would be a big help if any one here could assist, me because i don't want this phone to not work any more.
Best regards
Oleander
PS. Sorry for my english, i hope you understand.
Try the ROM for recovery. It is an nvflash method. Make sure the battery is out when using nvflash.
Post results, including your steps if problem is not solved.
Sent from an Amazeing android that rose from the ashes.
ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please
For custom ICS ROMs, yes, you have to first install 'regular' ICS. For that as well as driver install:
http://forum.xda-developers.com/showthread.php?t=2195753
Then you can install any custom ROM based on ICS.
You should be logged onto pc as administrator...
hey thanks for the reply i have done all that but the omap driver just wouldnt intall or connect, iive tried a few methods but they dont seem to be working dont know if its through sheer tiredness or now impaitience to get it done but ive now complety baffled myself as im stuck with android guy with a red triangle on boot screen no recovery or anything, not sure where to go from here even to get it back to stock
As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.
drastic00 said:
As described there when it is blinking in device manager you will need to quickly right click on it when it appears then force install it.
Click to expand...
Click to collapse
i did try that that but its keeps disconecting and says parameter not found or error i dont know if it is that it disconncting or a problem with my laptop or phone connector but i shall give it another go, thanks
Use official lg tool, and choose emergency restore, this will flash the newest official ics.
Hope it works
Sent from my LG-P920 using xda app-developers app
no i crnt use the lg tool it says that my phone isnt connected
look
amanda87 said:
ive rooted an flashed my lg optimus 3d there only one rom that works as all the other roms just keep restarting the phone. i think because i didnt update to ics or something to do with baseband im not sure,i was on gb and still am, iv tried various methods of trying to restore my phone to stock so i can start again but i crnt update the omap drivers as device manager is flashing on and off and when i get chance its says parameter is incorrect, anyhelp to restore or get my phone to ics would be much appreciated please please
Click to expand...
Click to collapse
you should run in windows 7 & install lg driver look in http://forum.xda-developers.com/showthread.php?t=2337545
if all above not work change your usb cable & your pc device .
and try again
hey, yea im half way there now, tried it on my other laptop running windows 7 not xp and managed to intall the omap, run the fast boot and all in one tool to install everything, not quite worked as nothing happens after fastboot and just says waiting for device but think i know how to fix that, fingers crossed
i made a extremely poor decision and was trying to change the boot animation loader when i actually changed the boot cmd and now it boots to samsung then to download everytime,. i can get into the onboard recovery yet i cant access safestrap and none of the many many drivers ive tried i cant get the phone to show to connect, its listed as unknown device in my device manager and ive hand picked the ones im supposed to have to other ones. ADB doesnt see it either and i was wondering if there is cmd for adb to find myu device, if you help me guys i promise ill only practice on hand me down smart phones. Ty:cyclops: [email protected] SM-G870A
This may be a dumb question, but have you tried Odin? I have had situations similar to this with my Samsung devices and always thought i bricked. But as long i could get into download mode, i could Odin back to stock and start over.
MrAwesome75 said:
This may be a dumb question, but have you tried Odin? I have had situations similar to this with my Samsung devices and always thought i bricked. But as long i could get into download mode, i could Odin back to stock and start over.
Click to expand...
Click to collapse
ya but i havent even tried loading a file into odin cause it wont see my device
and i have installed the samsung drivers but after this happened my pc wont see the phone
has to be a way to get a connection between the pc and phone
I'm not an expert so I'm not sure. Do you have the correct drivers installed on PC?
---------- Post added at 06:34 AM ---------- Previous post was at 06:30 AM ----------
Try different Odin versions. And make sure you have the proper drivers installed on the PC.
ya ive actually read that it probably doesnt have the function running to talk with the pc cause it cant boot. im all set up to reset the phoone. just need it to appear in my odin
..does kies still work?
[email protected] said:
i made a extremely poor decision and was trying to change the boot animation loader when i actually changed the boot cmd and now it boots to samsung then to download everytime,. i can get into the onboard recovery yet i cant access safestrap and none of the many many drivers ive tried i cant get the phone to show to connect, its listed as unknown device in my device manager and ive hand picked the ones im supposed to have to other ones. ADB doesnt see it either and i was wondering if there is cmd for adb to find myu device, if you help me guys i promise ill only practice on hand me down smart phones. Ty:cyclops: [email protected] SM-G870A
Click to expand...
Click to collapse
When you boot to system
It doesn't show anything right ??
but the touch is still functioning
Sent from my GT-i9300 running cm11 using tapatalk.
when i just boot it goes to download mode and says "could not do do normal boot"
i can access recovery mode and download mode but i cant get drivers to show it, and it used to show it until i did this, can i put a file on my micro SDcard from my pc via card reader then install it in recovery mode ? like firmware or a memory wipe reset?
If you can get into recovery, I believe that would be possible. Couldn't hurt to try. As long as you can get into recovery and all the recovery functions work, I don't see why you couldn't.
fixed it!
well after two nights of reading i got my pc to discover the device by changing ports three different times to find one that seamed to like it. and also installed kies and installed the drivers from them, (figured couldnt go wrong after as many as ive used from samsung and others). so win7 pro / altered boot command and only stock options afterwards sucks big time. ty all for helping me
never let up