Related
Hello, I have a launch Evo Shift (almost a year old now), and am running Cyanogenmod Nightly 255 with a2ext and a ton of apps installed (above 200 apps running from a class 10 32gb card, dalvik cache on the card), and ScaryKernel with the smartass governor (max 1497 MHz). However, I sporadically get random reboots, gps not working (requiring a reset), camera reboots, and the rare "turn off" bug where it turns off while sleeping. In addition most recently I have a bug where every time that I reboot into clockworkmod recovery to back up , it resets almost all of my phone preferences.
I absolutely love cyanogenmod and appreciate the hell out of it and the work that has been done, but I'm wondering if these bugs are either due to running cyanogenmod nightlies or if I have a defective phone. I also have tried Sense-based roms such as Mikshifted, but the Sense memory overhead is just too large for me. I have no worries if the phone is defective, since I have sprint insurance and can wipe back to stock to exchange it. However, going through all the exchange, re-root and restore procedure would be a pain if its not necessary. Does anyone have any thoughts or advice?
Thanks in advance.
I don't think this is s shift problem. I experienced this myself and even had my phone replaced by sprint because i thought it was. Try not overclocking and see if that helps. Another way to test if its the phone is to see if you have these same problems on a sense rom
Sent from my PC36100 using xda premium
draven760 said:
Hello, I have a launch Evo Shift (almost a year old now), and am running Cyanogenmod Nightly 255 with a2ext and a ton of apps installed (above 200 apps running from a class 10 32gb card, dalvik cache on the card), and ScaryKernel with the smartass governor (max 1497 MHz). However, I sporadically get random reboots, gps not working (requiring a reset), camera reboots, and the rare "turn off" bug where it turns off while sleeping. In addition most recently I have a bug where every time that I reboot into clockworkmod recovery to back up , it resets almost all of my phone preferences.
I absolutely love cyanogenmod and appreciate the hell out of it and the work that has been done, but I'm wondering if these bugs are either due to running cyanogenmod nightlies or if I have a defective phone. I also have tried Sense-based roms such as Mikshifted, but the Sense memory overhead is just too large for me. I have no worries if the phone is defective, since I have sprint insurance and can wipe back to stock to exchange it. However, going through all the exchange, re-root and restore procedure would be a pain if its not necessary. Does anyone have any thoughts or advice?
Thanks in advance.
Click to expand...
Click to collapse
I would say try using shift deck, U.K.E, or any cm based aosp roms and see if the problem persist. If it does then its your phone, if not then its a bug in the nightly which is the reason its a nightly because bugs could be there
From what you've stated above I don't think it's a phone, or Rom issue. Seems like you have way too many apps. You have to keep in mind a lot of those apps run in the background. Which uses up Memory, which slows the phone. It will also in xtreme cases cause Random Reboots, Lag, even Random app shut down. I'd remove at the very least half of those and see how it performs. Even 100 apps is still a bit much.
Great, thank you for the advice. Even though I have been monitoring my free memory and running programs, I'm kind of a pack rat so I think it's just time to streamline my programs.
Yes definately loose a lot of thoose apps. Might even want to try a fresh reflash, no apps. Then just add what you know you'll definately need. Willing to bet it's not even half.
TEAM MiK
Mik Roms Since 3/13/11
Which governor are you using with Scary kernel? You should be using Scary gov not any of the others.
Min mhz 300+
Check this first.
If that wasn't your problem run fix permissions from ROM manager and reboot.
If that wasn't your problem boot into clockwork recovery, format /system, wipe dalvik cache, wipe cache, reflash cm255, flash crashv2010's gapps, reflash scary kernel, reboot, wait 10 minutes, problems solved.
---------- Post added at 02:10 PM ---------- Previous post was at 02:08 PM ----------
draven760 said:
and ScaryKernel with the smartass governor
Click to expand...
Click to collapse
This is your problem! ONLY USE Scary, Toasty or Batterysave!
Scary = smartass
Toasty = performance
Batterysave! = conservative
ALL OTHER GOVS WILL NOT BE STABLE!!!
Smartass has always been stable for me
Sent from my PG06100 using Xparent Pink Tapatalk
YoungCorruptionV2.0 said:
Smartass has always been stable for me
Sent from my PG06100 using Xparent Pink Tapatalk
Click to expand...
Click to collapse
Depends how large the gap between your min/max cpu is.
What's your min max?
Try widening it with smartass and see how stable it is.
Well I guess I'm the exception . Dodge Kernel v1.6 Ext.4 , smartass setting , 1.92gHz Max , 245gHz Min. Can run that all day, but usually don't. I use the default settings 1.2gHz Max , 245gHz min. The battery life is better at the default settings.
VICODAN said:
Depends how large the gap between your min/max cpu is.
What's your min max?
Try widening it with smartass and see how stable it is.
Click to expand...
Click to collapse
I usually have the min at the lowest and the max at around 1.2 - 1.6 ghz
prboy1969 said:
Well I guess I'm the exception . Dodge Kernel v1.6 Ext.4 , smartass setting , 1.92gHz Max , 245gHz Min. Can run that all day, but usually don't. I use the default settings 1.2gHz Max , 245gHz min. The battery life is better at the default settings.
Click to expand...
Click to collapse
Some shifts can run 1.9ghz some cant. I have 2 shifts here, both hardware rev 004, one can't go past 1.6ghz.
---------- Post added at 01:38 AM ---------- Previous post was at 01:36 AM ----------
YoungCorruptionV2.0 said:
I usually have the min at the lowest and the max at around 1.2 - 1.6 ghz
Click to expand...
Click to collapse
smartass on pershoot is ok
smartass on scarykernel is not ok.
Yes definately know what you mean. Out of six mine is the only one that will do 1.9gHz . All hardware 004. Out of the others two will do 18gHz, but only one is stable. The rest max out at 1.5gHz, after that they're not stable.
TEAM MiK
Mik Roms Since 3/13/11
VICODAN said:
Some shifts can run 1.9ghz some cant. I have 2 shifts here, both hardware rev 004, one can't go past 1.6ghz.
---------- Post added at 01:38 AM ---------- Previous post was at 01:36 AM ----------
smartass on pershoot is ok
smartass on scarykernel is not ok.
Click to expand...
Click to collapse
Probably true, i'm on tiamat v1.1.4 with smartassV2 so that could make a difference but i always use smartass cause i love the battery life i get with it
prboy1969 said:
Yes definately know what you mean. Out of six mine is the only one that will do 1.9gHz . All hardware 004. Out of the others two will do 18gHz, but only one is stable. The rest max out at 1.5gHz, after that they're not stable.
TEAM MiK
Mik Roms Since 3/13/11
Click to expand...
Click to collapse
YoungCorruptionV2.0 said:
Probably true, i'm on tiamat v1.1.4 with smartassV2 so that could make a difference but i always use smartass cause i love the battery life i get with it
Click to expand...
Click to collapse
Thank you for confirming my opinion as fact. I will reference this thread again later if I need to.
i would get new rom manager that fixed some of my problems also try reloading cm7 and put back on you phone with titanium backup
VICODAN said:
Some shifts can run 1.9ghz some cant. I have 2 shifts here, both hardware rev 004, one can't go past 1.6ghz.
---------- Post added at 01:38 AM ---------- Previous post was at 01:36 AM ----------
smartass on pershoot is ok
smartass on scarykernel is not ok.
Click to expand...
Click to collapse
I have rev 0004 and mine clocks to 2ghz just fine...Some kernels just can't handle 2ghz, and most only clock to 1.8 or 1.9
I've taken the liberty to root my GS4 and have some time spent on tweaking kernel parameters.
For these settings you need to be rooted and have downloaded a kernel tweaking app, such as Trickster Mod.
I believe these settings should make some pretty significant changes to your experience.
Follow the screenshots for the configurations:
Any heat issues?
akira02rex said:
I've taken the liberty to root my GS4 and have some time spent on tweaking kernel parameters.
For these settings you need to be rooted and have downloaded a kernel tweaking app, such as Trickster Mod.
I believe these settings should make some pretty significant changes to your experience.
Follow the screenshots for the configurations:
Click to expand...
Click to collapse
Since the changes have you noticed any significant heat or rapid battery drain?
john.082896 said:
Since the changes have you noticed any significant heat or rapid battery drain?
Click to expand...
Click to collapse
Still testing. I am charging the device now and I'll report later but i'm guessing hardly anything noticeable.
Thanks for the post!
I am however curious about the use of ZRAM as this phone should easily have enough built in RAM to where that is not needed..
ZRAM generally gets used when a system is RAM deficient.. ZRAM will also be noticeably slower than using the built in RAM as well...
Looking forward to you reporting back..
raqball said:
Thanks for the post!
I am however curious about the use of ZRAM as this phone should easily have enough built in RAM to where that is not needed..
ZRAM generally gets used when a system is RAM deficient.. ZRAM will also be noticeably slower than using the built in RAM as well...
Looking forward to you reporting back..
Click to expand...
Click to collapse
I think you may be confused about ZRAM.
ZRAM is used for swapspace instead of placing the swap on the "disk" it is placed in RAM for a performance boost.
akira02rex said:
I think you may be confused about ZRAM.
ZRAM is used for swapspace instead of placing the swap on the "disk" it is placed in RAM for a performance boost.
Click to expand...
Click to collapse
I don't think I am confused... Why use swap space for RAM when this phone already has plenty?
Then again, I may be confused..
http://en.wikipedia.org/wiki/ZRam
Going to give this a shot for a little while.
Baldilocks said:
How do you get to the Interactive Control screen?
Click to expand...
Click to collapse
I believe you have to set the CPU governor to interactive, apply by pressing the check at the top right, then going into governor control at the bottom.
tysj said:
I believe you have to set the CPU governor to interactive, apply by pressing the check at the top right, then going into governor control at the bottom.
Click to expand...
Click to collapse
Yeah, I found that right after I posted. Thanks!
---------- Post added at 01:49 AM ---------- Previous post was at 01:24 AM ----------
This mod has reduced stutter and sputter by like 90% on my device. Will keep pushing it.
Thanks. Really seems to help alot on mine. I did leave the min cpu at default speed though.:thumbup:
Only downside is that after reboot you have to change the settings again.
Sent from my Galaxy S4 using Tapatalk 2.
You can set at boot in the settings from the menu.
Baldilocks said:
Only downside is that after reboot you have to change the settings again.
Sent from my Galaxy S4 using Tapatalk 2.
Click to expand...
Click to collapse
bri315317 said:
You can set at boot in the settings from the menu.
Click to expand...
Click to collapse
Indeed. Just hit the menu capacitive button to get to the menu pictured below:
Your menu looks so different in terms of the interactive controls... I have none of those values or menus but an even longer list.
Why does your say you have power savings enabled? Why not turn power savings completely off? I still run my galaxy for like 2 days with Music playing like an 8 hour day.
Been running this since last night..
I am not really noticing any difference but will keep testing..
Disclaimer:
I already had 101 apps / processes frozen, animations set to zero, force GPU enabled and am using a different launcher. I think most, if not all, of my lag was done away with by doing that..
raqball said:
Been running this since last night..
I am not really noticing any difference but will keep testing..
Disclaimer:
I already had 101 apps / processes frozen, animations set to zero, force GPU enabled and am using a different launcher. I think most, if not all, of my lag was done away with by doing that..
Click to expand...
Click to collapse
Yea my phone was fast to begin with but with this my battery life has been amazing
Sent from my SAMSUNG-SGH-I337 using xda premium
Hers mine. Geared more towards battery. Never had lag issues even from day one prior to rooting.
ATT S4 Rooted. Beastin.
4.2.2
slider2828 said:
Your menu looks so different in terms of the interactive controls... I have none of those values or menus but an even longer list.
Why does your say you have power savings enabled? Why not turn power savings completely off? I still run my galaxy for like 2 days with Music playing like an 8 hour day.
Click to expand...
Click to collapse
On the general settings, after you've selected interactive you have to hit the check mark on upper right. Then click governor control at the bottom, you should see the interactive settings.
Cant wait to find out what settings gives best battery life and performance.
Yeah. Gotta keep hitting that check mark or nothing takes.
Sent from my Galaxy S4 using Tapatalk 2
Seems to not go into deep sleep on interactive. Is this happening to uou?
I have only flashed the rom not kernel in LG P500.But want to see if the frequency of the processor can help me.My battery drains very fast and i don't play any games etc also.
My minimum is 320 Mhz & maximum is 600 Mhz.I want to do mainly coz battery is draining too fast & not once i am able to charge full.Thanks
kitu34 said:
I have only flashed the rom not kernel in LG P500.But want to see if the frequency of the processor can help me.My battery drains very fast and i don't play any games etc also.
My minimum is 320 Mhz & maximum is 600 Mhz.I want to do mainly coz battery is draining too fast & not once i am able to charge full.Thanks
Click to expand...
Click to collapse
Hmmm you may have to calibrate your battery
Use this app
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
BTW which ROM are you using ?
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Hmmm you may have to calibrate your battery
Use this app
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
BTW which ROM are you using ?
I am using pac-rom 4.2.2.
Click to expand...
Click to collapse
all CM based roms shoud have in settings development a thing to activate to show you CPU usage, if you tick that option, CPU usage(frequency) it will be shown on home screen in a little widget
or use CPUSpy
if battery drains fast it is because of various problems, wifi, apps that runs in background and prevent deepsleep and causes wakelocks, but CPUSpy it will list all hungry apps and all CPU usage
cpu frequency cannot be set over 600 with stock kernel, but it can be changed with some apps like SetCPU or CPUMaster (root required), this apps have profiles for different situations (screen off, charging, gaming, music, talking, net surfing etc), if I remember SetCPU can be found here on XDA free, search it
grigtm said:
all CM based roms shoud have in settings development a thing to activate to show you CPU usage, if you tick that option, CPU usage(frequency) it will be shown on home screen in a little widget
or use CPUSpy
if battery drains fast it is because of various problems, wifi, apps that runs in background and prevent deepsleep and causes wakelocks, but CPUSpy it will list all hungry apps and all CPU usage
cpu frequency cannot be set over 600 with stock kernel, but it can be changed with some apps like SetCPU or CPUMaster (root required), this apps have profiles for different situations (screen off, charging, gaming, music, talking, net surfing etc), if I remember SetCPU can be found here on XDA free, search it
Click to expand...
Click to collapse
Thanks, but in this rom there is one feature called 'performance control' and it shows exactly what cpu spy shows.I have used cpu spy and it does not show hungry apps,maybe it is cpu spy plus.
I AM CHECKING REGULARLY AND MY PHONE IS NOT GOING INTO DEEP SLEEP AT ALL EVEN WHEN SCREEN OFF.
And i have installed only whatsapp and titanium.My battery was at 80% when it freezed and when i took the battery out and restarted it battery was at 40%.
And i am concerned about the minimum frequency which is 320 in this,it can be changed to 122 which is not being used coz of the default settings.I s it safe to do?
with stock kernel any freqv is stable, but it will not help, something is preventing deepsleep, uninstall some apps that you suspect that can do this problem, search web abouth apps that you have installed on your phone, or read pacman thread or change kernel, I do not think a custom rom runs well with LG stock kernel, and when you flash a custom rom that rom comes with a custom kernel, try DJNOxD or sweetnsour 2.6 kernels
change governor and test it, maybe it will help, I allways use smartass governor but search forum for governors preventing deepsleep
get Better Battery Stats, this gives more detailed battery usage
akiratoriyama said:
Hmmm you may have to calibrate your battery
Use this app
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
BTW which ROM are you using ?
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
I think my phone is not going into deep sleep and it is coz of the minimum frequency which is 320.
But still i will try battery calibration but i can't install from google store.Is there anyother place or can you attach here the apk?
read here http://forum.xda-developers.com/showthread.php?t=2358278 , some of us are writing some personal thoughts abouth battery drain
---------- Post added at 07:21 PM ---------- Previous post was at 07:20 PM ----------
kitu34 said:
I think my phone is not going into deep sleep and it is coz of the minimum frequency which is 320.
But still i will try battery calibration but i can't install from google store.Is there anyother place or can you attach here the apk?
Click to expand...
Click to collapse
I use min 480 and my phone goes into deepsleep
grigtm said:
with stock kernel any freqv is stable, but it will not help, something is preventing deepsleep, uninstall some apps that you suspect that can do this problem, search web abouth apps that you have installed on your phone, or read pacman thread or change kernel, I do not think a custom rom runs well with LG stock kernel, and when you flash a custom rom that rom comes with a custom kernel, try DJNOxD or sweetnsour 2.6 kernels
change governor and test it, maybe it will help, I allways use smartass governor but search forum for governors preventing deepsleep
get Better Battery Stats, this gives more detailed battery usage
Click to expand...
Click to collapse
Yeah i have already installed betterbattery stats,lets see.Don't if i will be able to understand what it shows,set it to partial wakelock though.Pac Rom thread is not responding since three days,i mean no reply no help as yet.
Tomorrow i will do to things,one is remove this rom and have another & second is to remove the gapps as well and reflash.I do not know how to this.Then i will know if rom was responsible for this or not and decide for the kernel therafter.
Should i make new thread for that or you will tell here only?
or you can change rom if you do not solve the problem
grigtm said:
read here http://forum.xda-developers.com/showthread.php?t=2358278 , some of us are writing some personal thoughts abouth battery drain
---------- Post added at 07:21 PM ---------- Previous post was at 07:20 PM ----------
I use min 480 and my phone goes into deepsleep
Click to expand...
Click to collapse
480 minimum frequency? If yes then even 320 should not be a problem
kitu34 said:
Yeah i have already installed betterbattery stats,lets see.Don't if i will be able to understand what it shows,set it to partial wakelock though.Pac Rom thread is not responding since three days,i mean no reply no help as yet.
Tomorrow i will do to things,one is remove this rom and have another & second is to remove the gapps as well and reflash.I do not know how to this.Then i will know if rom was responsible for this or not and decide for the kernel therafter.
Should i make new thread for that or you will tell here only?
Click to expand...
Click to collapse
maybe changing kernel it will help, I use sweetnsour 2.6 version4e kernel http://forum.xda-developers.com/showthread.php?t=2140930
---------- Post added at 08:38 PM ---------- Previous post was at 08:31 PM ----------
oh, sry, I'am a big NOOB, all JB 4.2.2 are using 3.0.8 kernels that have big problems with wifi battery drain, it is a common problem with all JB roms, disable wifi And drain should be ok, but I recomand to use an ICS rom that uses 2.6 kernels
but this problem is known by everybody and discussed to all JB roms threads and in link that I provided you, so, it cannot be done by me or you, we have to wait for the people that can do real things in here, developers
this problem is because Qualcom and Google does not support old ARMv6 processors in JB, so with all the magic from XDA developers some problems cannot be solved
[/COLOR]oh, sry, I'am a big NOOB, all JB 4.2.2 are using 3.0.8 kernels that have big problems with wifi battery drain, it is a common problem with all JB roms, disable wifi And drain should be ok, but I recomand to use an ICS rom that uses 2.6 kernels
but this problem is known by everybody and discussed to all JB roms threads and in link that I provided you, so, it cannot be done by me or you, we have to wait for the people that can do real things in here, developers
this problem is because Qualcom and Google does not support old ARMv6 processors in JB, so with all the magic from XDA developers some problems cannot be solved[/QUOTE]
I do not use wi fi,i use only 3g.Mine kernel version it says is 2.6.35.10.
I used BB stats but did not understand much,only thing i could understand was gps location provider running all the time.
Phone did not sleep for one second neither this 'gps location provider'
By the way which cpu spy or cpu spy plus you were talking about which tells about the apps consuming battery,coz even in the cpu spy plus it is the same like cpu spy.
I was mistaken, it is better battery stats
grigtm said:
I was mistaken, it is better battery stats
Click to expand...
Click to collapse
Try DS Battery Saver...... it works with all versions and forces your phone to Deep Sleep.....
Hit Like if i helped you.....
Keep rootedsystem.img in internel storage if somehow ur phone Bricks!!
due to lack of feedback I decided to discontinue this development.You can still use the files below and modify as u like.Instructions:
1.Plz use the attached zip extract
->Do back up ur files first..<-
2.Replace init.qcom.post_boot.sh and thermal-engine-8994.conf with extracted ones
3.Set permission rw-r-r
4.Power off wait the phone to cool down properly and bootup
5.Enable developer option and check "Disable hw Overlay" & (optionally) "Force GPU Composition"
6.Reboot Once more and get a cooler G flex 2
Do post some feedbacks and press thanks button if it helped you :laugh::laugh::angel::angel:
Tweaks:
Ondemand Governor
Underclocked big.CLUSTER to 1.83GHz
Underclocked little.CLUSTER to 1.38GHz
Applied Power_Tweaks for sd810 from OnePlus 2
Input boost frequency to 384MHz on cpu.2 & cpu.6 and 32ms input_boost
Applied GPU composition set on init(during boot)
Removed unwanted init.qcom.post_boot cases(Reduced init file size)
GPU thermal throttling starts at higher temperature
CPU thermal throttling starts at higher temperature
CPU 0 - 3 has sampling of 100 for frequency lock (as little cluster does not overheat soon)
CPU 4 & 3 has sampling of 35 for frequency lock(as these two overheats very fast)
CPU 5 & 6 off is set to at high temperature
and more CPU +battery thermal tweaks
changelogs:
2k16/12/02 -
initial tweaks published
2k16/12/19 -
-V2.0 beta
Sampling time - 50000ns core.little
Sampling time - 30000ns core.big
core.Big is power biased (partially working)
sampling down factor of core.Big is 2 (not working properly)
Can you post what changes exactly you applied?
k3lcior said:
Can you post what changes exactly you applied?
Click to expand...
Click to collapse
updated OP and post #2
Can i use this on f510s MM?
tachiquan3 said:
Can i use this on f510s MM?
Click to expand...
Click to collapse
You need root to replace those files.. In MM there is no root
On the test right now. I've downgraded yesterday evening from 6.0.1 to 5.1.1. I was sick because of no root on the 6.0.1
So, a quick update: I've never used mods for thermal management before. My experience on the last 6 months were based on a stock LG G flex 2 with android 6.0.1
Right now I'm using andoid 5.1.1 with this thermal mod.
So what kind of tests do you want me to perform?
On a daily basis, and when the phone is under "stress" it will still heat up, however the CPU temp don't go above the 80ºC. This is done by this thermal management or is it done by another process?
I don't feel any lag or what so ever. Regarding games, I just play [email protected] [email protected] However I do use dual window quite often to check youtube videos on and chrome at same time, and I dind't find any issues till now.
Thanks
faagaspar said:
So, a quick update: I've never used mods for thermal management before. My experience on the last 6 months were based on a stock LG G flex 2 with android 6.0.1
Right now I'm using andoid 5.1.1 with this thermal mod.
So what kind of tests do you want me to perform?
On a daily basis, and when the phone is under "stress" it will still heat up, however the CPU temp don't go above the 80ºC. This is done by this thermal management or is it done by another process?
I don't feel any lag or what so ever. Regarding games, I just play [email protected] [email protected] However I do use dual window quite often to check youtube videos on and chrome at same time, and I dind't find any issues till now.
Thanks
Click to expand...
Click to collapse
U dont need to perform any tests.. You just have to see if these mods will get you a more stable lagfree phone with a better battery life or not..
I am bringing out a next version which has better cpu management..
Also after exams i am going to see if we can implement these tweaks into MM also .. Maybe make a dev group for MM root as v20 has made some progress...
How does your mod, without the underclocking part, compare to a combination of Probaina's thermal tweaks, Soosoolhastam's tweaked interactive governors boot script, and your own init.d scripts (also without the underclocking part)? I know it's a difficult question, but I need to know this if I'm going to install your mod. Thanks in advance~
Sent from my LG-H959 using XDA-Developers mobile app
Iron_Overheat said:
How does your mod, without the underclocking part, compare to a combination of Probaina's thermal tweaks, Soosoolhastam's tweaked interactive governors boot script, and your own init.d scripts (also without the underclocking part)? I know it's a difficult question, but I need to know this if I'm going to install your mod. Thanks in advance~
Sent from my LG-H959 using XDA-Developers mobile app
Click to expand...
Click to collapse
The interactive tweaks boost the cpu clock in many ways but all are not good for this 810chip.. Also he has directly copied and pasted the tweaks from nexus 6p without crediting the original poster ..plus it has disabled touchboost which is not present in g flex 2.. Meaning that may generate unexpected error..
Probainas tweaks was really good but i have modified stock one to not turn off cores even in heavy gaming..with probainas it heats fast and turns off cores 4 and 7 soon but mine endures longer without much heat .. Not that everyone may feel same.. But heavy gaming may lag from mine..
I have tweakd ondemand gov instead of interactive..
adds08 said:
The interactive tweaks boost the cpu clock in many ways but all are not good for this 810chip.. Also he has directly copied and pasted the tweaks from nexus 6p without crediting the original poster ..plus it has disabled touchboost which is not present in g flex 2.. Meaning that may generate unexpected error..
Probainas tweaks was really good but i have modified stock one to not turn off cores even in heavy gaming..with probainas it heats fast and turns off cores 4 and 7 soon but mine endures longer without much heat .. Not that everyone may feel same.. But heavy gaming may lag from mine..
I have tweakd ondemand gov instead of interactive..
Click to expand...
Click to collapse
Thank you very much for your response! I'll install your mod instead of the other ones, then. Cheers!
Sent from my LG-H959 using XDA-Developers mobile app
Works very well for me, thanks Bro
PS: sry for my bad english ^^
which "init.qcom.post_boot.sh" is the correct one, the one from the zip "thermal_tweaks_021216" or the one from "coolDemand_v2.0b"? Either way, what do I edit exactly to add the mod without the underclocking part?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
I don't want to sacrifice performance in any way.
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
if you would be kind to just edit the performance compromising parts for me, it would be awesome. Otherwise, please tell me what to edit out to not compromise performance. (I will be doing lots of gaming)
---------- Post added at 10:56 AM ---------- Previous post was at 10:35 AM ----------
Also, can I use your mods together with your init.d scripts (also without the underclocking part)?
Iron_Overheat said:
which "init.qcom.post_boot.sh" is the correct one, the one from the zip "thermal_tweaks_021216" or the one from "coolDemand_v2.0b"? Either way, what do I edit exactly to add the mod without the underclocking part?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
I don't want to sacrifice performance in any way.
---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
if you would be kind to just edit the performance compromising parts for me, it would be awesome. Otherwise, please tell me what to edit out to not compromise performance. (I will be doing lots of gaming)
---------- Post added at 10:56 AM ---------- Previous post was at 10:35 AM ----------
Also, can I use your mods together with your init.d scripts (also without the underclocking part)?
Click to expand...
Click to collapse
Sorry for the late reply..
coolDemand v2.0b is still in beta..
You can try out that but the first one thermal_tweaks_021216 is v1 which is highly stable..
Init.d scripts are something that run on boot.. so after apply the cooldemand tweak you can port init.d into it but the scripts won't be any use because it's already implemented..
So just try these.
And about the under clock part don't worry at intensely high gaming the cap will be removed anyways..
adds08 said:
Sorry for the late reply..
coolDemand v2.0b is still in beta..
You can try out that but the first one thermal_tweaks_021216 is v1 which is highly stable..
Init.d scripts are something that run on boot.. so after apply the cooldemand tweak you can port init.d into it but the scripts won't be any use because it's already implemented..
So just try these.
And about the under clock part don't worry at intensely high gaming the cap will be removed anyways..
Click to expand...
Click to collapse
No worries, but just for my perfectionism's sake, can you please tell me where to edit so that it doesn't underclock? I don't know why but I really don't want to underclock...
Sent from my LG-H959 using XDA-Developers mobile app
Iron_Overheat said:
No worries, but just for my perfectionism's sake, can you please tell me where to edit so that it doesn't underclock? I don't know why but I really don't want to underclock...
Sent from my LG-H959 using XDA-Developers mobile app
Click to expand...
Click to collapse
If u want thermal tweaks.. u can download thermaltweaks 1st one and apply only the thermal-config file.
After a few days i am gonna sort everything out
adds08 said:
If u want thermal tweaks.. u can download thermaltweaks 1st one and apply only the thermal-config file.
After a few days i am gonna sort everything out
Click to expand...
Click to collapse
But won't that mean I'll miss out the other tweaks besides thermal ones? Like GPU compositioning, tweaked ondemand governor, etc? Can't I just delete/replace certain segments of the boot script file's text, to have all the advantages except underclocking? Sorry if this question is stupid.
Iron_Overheat said:
But won't that mean I'll miss out the other tweaks besides thermal ones? Like GPU compositioning, tweaked ondemand governor, etc? Can't I just delete/replace certain segments of the boot script file's text, to have all the advantages except underclocking? Sorry if this question is stupid.
Click to expand...
Click to collapse
The thermal file was modified to better optimize heat in this phone by me .. and is a base on other bootscript tweaks
I have discontinued this tweak and wont be work8ng on cooldemand anymore as i didnt enough feedback to progress with my work..
U can use any of this file independently..
U can just use thermal conf file if u wish with stock postboot script or anyother tweak..
@Razziell
EDIT NEW LINK:
AospExtended-v4.6-markw-20170917-1455-UNOFFICIAL
Really? Can u give us a feedback? Any bug?
N1ck474 said:
Really? Can u give us a feedback? Any bug?
Click to expand...
Click to collapse
I just bring the news. I didn't try
Sent from my Redmi 4 Prime using XDA Labs
aviranx said:
I just bring the news. I didn't try
Click to expand...
Click to collapse
Thank you.
N1ck474 said:
Really? Can u give us a feedback? Any bug?
Click to expand...
Click to collapse
Bugs:
With hal3 active there will be problems with the camera in third-party applications (the default is off)
The "menu" button is not configurable, is the "menu" always called? QRAttached fileFIX_FRAMEWORK.zip (9.27 MB)
There may be problems with the stock camera (if problems with other cameras do not go away) - QRAttached filemarkw-oss-cam.zip (724.45 KB)
It is possible to "stick" the notification of charging / connecting when disconnecting usb / charging (it is treated by resetting)
Setting it right now, it's surely more updated than Hrafninn's last RR rom, mostly for the new kernel with Wi-Fi updated drivers and hotplug, also with optional lowered Cpu freq at 400MHz. Customizations seems to be almost on par with RR, great!
Let's see with Greenify and some blocked alarms/wakelock, what autonomy can provide :fingers-crossed:
francescod said:
Setting it right now, it's surely more updated than Hrafninn's last RR rom, mostly for the new kernel with Wi-Fi updated drivers and hotplug, also with optional lowered Cpu freq at 400MHz. Customizations seems to be almost on par with RR, great!
Let's see with Greenify and some blocked alarms/wakelock, what autonomy can provide :fingers-crossed:
Click to expand...
Click to collapse
Also it have 2.21GHz max freq. that gives antutu over 65k and geekbench 4.500+. But that 400MHz is unusable. Kernel always switching between 652-2.21 GHz and when i tried to set minimum freq to 400MHz my device freeze and rebooted.
tanerwars said:
But that 400MHz is unusable. Kernel always switching between 652-2.21 GHz and when i tried to set minimum freq to 400MHz my device freeze and rebooted.
Click to expand...
Click to collapse
It depends on your specific Cpu and other variables, mine, for now seems to be stable...:fingers-crossed:
Anyway I saw there's a huge NETLINK wakelock denying the deepsleep of my device...Now I've deleted all my alarms and wakelock blocked things and from My Android Tools (maybe I was wrong on something that caused the wakelock) and it's fully charged stopped manually at 99%, let's see what happens. The wifi (maybe a little weaker than Miui) and bluetooth scanning are off. Charging was at high speed with original charger and Aukey "big" cable , Led was switched on immediately, but then I've charged with the device off, to speed up the process, and noticed that there's no percentage, only an empty animated icon. Fingerprint is ok, just few issues when trying to unlock on Nova Launcher's home page! I've found that give root to Nova instead of "administrator's privilege" is resolving this issue (Root is needed to use the "lock now button" with Nova).
I've also set the Low Cpu freq at 400MHz and limited the high at 2GHz instead of modified 2.2GHz. Today I'll test also the "equalizer" system app, that yesterday crashed when I opened up from inside Shuttle music app.
I hope to solve the wakelock problem.
Update
Using it right now and works perfectly
Is it support Substratum theming?
ghanipradita said:
Is it support Substratum theming?
Click to expand...
Click to collapse
Yes, it is full of OMS support
i notice the max cpu freq is 2.208 Mhz (overclocked) while our cpu maximum freq is 2.000 Mhz, correct me if i'm wrong, thats why the rom is so fast, is it safe for our cpu health?
rchmtsa said:
Using it right now and works perfectly
Click to expand...
Click to collapse
Share sot!
mikey000 said:
i notice the max cpu freq is 2.208 Mhz (overclocked) while our cpu maximum freq is 2.000 Mhz, correct me if i'm wrong, thats why the rom is so fast, is it safe for our cpu health?
Click to expand...
Click to collapse
Would like to know too!
mikey000 said:
i notice the max cpu freq is 2.208 Mhz (overclocked) while our cpu maximum freq is 2.000 Mhz, correct me if i'm wrong, thats why the rom is so fast, is it safe for our cpu health?
Click to expand...
Click to collapse
aviranx said:
Share sot!
Would like to know too!
Click to expand...
Click to collapse
Yes it's safe.It's a small overclock and beside that there are mechanisms like cpu throttling and core offline that prevent overheating.Also the rom is not fast because of that, you can barelly notice any improvement from a 10% speed increase.
What about battery? I'm on ViperOS right now because that Pixel Experience that offer, but I really want to try this one
---------- Post added at 05:06 AM ---------- Previous post was at 04:36 AM ----------
mikey000 said:
i notice the max cpu freq is 2.208 Mhz (overclocked) while our cpu maximum freq is 2.000 Mhz, correct me if i'm wrong, thats why the rom is so fast, is it safe for our cpu health?
Click to expand...
Click to collapse
Hey Mikey, I remember you told me that you was on Viper OS (I'm too right now). Between that one and this one, which is better in your experience?
Mangel79 said:
What about battery? I'm on ViperOS right now because that Pixel Experience that offer, but I really want to try this one
---------- Post added at 05:06 AM ---------- Previous post was at 04:36 AM ----------
Hey Mikey, I remember you told me that you was on Viper OS (I'm too right now). Between that one and this one, which is better in your experience?
Click to expand...
Click to collapse
I noticed AOSP extended faster, i like viper because it has built in dark theme
mikey000 said:
I noticed AOSP extended faster, i like viper because it has built in dark theme
Click to expand...
Click to collapse
On battery terms, have you noticed some important difference between them?
Mangel79 said:
On battery terms, have you noticed some important difference between them?
Click to expand...
Click to collapse
Haven't test battery life yet
-------
EDIT: It wasn't the ROM, it was my service, sorry. The ROM is perfect (until now)