Database Info

[TUTORIAL] Prepare Your AT&T HTC One X for Custom ROMs

OUT OF DATE USE THE ONE CLICK 1.85 ROOT TOOL IN THE FORUMS
As the ROM chefs go to work, we want to be sure that we are ready to flash the ROMs when they come to be available! This guide will help you set up your phone so that you can flash custom ROMs.
After this process you will have a phone on the latest firmware (1.85 at the moment) with bootloader unlock, rooted, and busybox installed.
This guide assumes you are on a root friendly firmware (as of now, it is firmwares 1.82.502.3 and below).
This is really going to be done in a four step process. First we need to root the device in order to access the place where the CID is stored so that we can change it and get unlocked. After changing the CID, we can unlock via htcdev.com. Then we can go on to installing a custom recovery and finally rooting!
From there I will give you some tips on installing ROMs.
NOTE: THIS PROCESS IS EXTREMELY DANGEROUS. IT MAY BE A BIT CONFUSING. READ OVER THE STEPS BEFORE STARTING. IF YOU DO NOT THINK YOU WANT TO RISK YOUR DEVICE BECOMING A BRICK THEN DO NOT ATTEMPT THIS. THIS VERY EASILY COULD RUIN YOUR DEVICE.
BACKUP EVERYTHING BEFORE STARTING AS EVERYTHING ON YOUR DEVICE WILL PROBABLY BE WIPED.
I, XDA, AND THE ORIGINAL TOOL CREATORS DO NOT TAKE RESPONSIBILITY FOR ANYTHING THAT HAPPENS TO YOUR DEVICE. IT IS SOLELY YOUR RESPONSIBILITY FOR WHAT YOU DO TO YOUR DEVICE.
Click to expand...
Click to collapse
Your warranty will be void if you unlock the bootloader. If you just root though then you can return to 100% stock by running the RUU.
This guide is for Windows only at the moment though I will try to post Mac and Linux guides at some point.
ORIGINAL TOOL THREADS:
One Click Root for 1.82 and below: http://forum.xda-developers.com/showthread.php?t=1644167
Spoof CID Script: http://forum.xda-developers.com/showthread.php?t=1672284
I will try to keep this as up to date as possible! Taking a visit to the index of the development forums (http://forum.xda-developers.com/showthread.php?t=1671237) is also a good idea!
Last Updated: 5/28/12

0. Getting the prerequisites:
Download the package at the bottom of the first post to get started.
Extract the package somewhere you will remember (like on your desktop).
Connect your device via USB and make sure you have USB Debugging enabled under settings.
Click to expand...
Click to collapse
1. Root your device
1. Open the folder you downloaded and navigate to the "root" directory.
2. Double click on the root-windows.bat file
3. Let the root run and do not touch your device. It will reboot several times- do not touch it or you may brick your device. Just let it do its thing and eventually after around 3 minutes you will have a rooted device in your hand.
Click to expand...
Click to collapse
2. Get the unlock token
In order to unlock the bootloader we will need to change a value called the CID. This will allow the htcdev.com site to unlock our phones.
1. Go to the downloaded folder and go to the "change_cid" folder.
2. Click on the "Spoof-CID.bat" file. Follow the instructions. Your CID will change from CWS__001 (stock AT&T CID) to 11111111 (called "SuperCID," will allow you to flash anything)
3. Log in to htcdev and go here: http://www.htcdev.com/bootloader/unlock-instructions (NOTE: This skips the agreements you need to click through as some of the buttons on their website are wonky. Doing this assumes you agree to their policies that are listed there)
4. Follow the instructions very carefully (they are written very well) untill the point where you get the file "Unlock_code.bin" via email. Stop there.
5. You should now have the file for bootloader unlock. MAKE SURE TO SAVE THAT FILE "Unlock_code.bin" TO THE "generic" FOLDER IN THE PACKAGE YOU DOWNLOADED! YOU WILL NEED IT LATER.
Click to expand...
Click to collapse
3. Run the RUU to update to latest firmware
1. Download the latest RUU from the xda forums (should be an .exe file)
Currently it is version 1.85.502.3 and you can download it here:
http://briefmobile.com/download-htc-one-x-att-1-85-update
2. Follow its instructions very carefully. It will take approximately 20 minutes to complete. BE PATIENT. IF YOU UNPLUG YOUR PHONE HERE YOU WILL GET A BRICK.
3. Let your phone reboot and go through initial setup again
Click to expand...
Click to collapse
4. Unlock your bootloader using Unlock Token
1. Navigate to the "generic" folder in cmd (you should have added the Unlock_code.bin file to this folder already) and plug your phone in in fastboot mode. To do this, first shut off your phone. Wait for it to turn off. Then hold the volume down button. Press the power button for 3 seconds while still holding the volume down key. Let go of the power button but keep holding the volume down button untill you see a white screen with a bunch of small text on it. Use the volume up and down keys and the power button to select the FASTBOOT option. Plug your phone into your computer. Then wait for the FASTBOOT text to turn into FASTBOOT USB.
2. Type the following into cmd on your computer:
fastboot flash unlocktoken Unlock_code.bin
NOTE: This step might take quite a few tries. For some it works on the first time. For others, it may take around 20 times. Just keep typing in the command until you get a sucessful flash. We aren't sure why it does this at the moment but just keep trying and don't give up.
3. Use the volume keys to say that you do want to unlock your bootloader and wait for reboot
4. Bootloader should be unlocked! Congrats, most of the grunt work is done! Go to Settings - Developer Options - Enable USB Debugging. This will allow us to continue
5. Re-set up phone and enable USB debugging again
Click to expand...
Click to collapse
5. Install a custom recovery so that we can gain root access
1. Currently there are two recovery options: ClockWorkMod Touch and TWRP (TeamWinRecoveryProject). Both are pretty much the same as they both use touch input but TWRP does have some other nice features like a built in file browser and more. It is also more touch optimized. ClockWorkMod is more "old school" and I personally feel more comfortable using it, but using TWRP is fine as well. It doesn't really matter which recovery your choose, both are good choices. Download whichever one you want below:
CWM Touch: http://forum.xda-developers.com/showthread.php?t=1677304
TWRP: http://forum.xda-developers.com/showthread.php?t=1677447
2. Drag the .img recovery file you just downloaded into the "generic" folder
3. Connect your phone via fastboot
4. Type the following:
fastboot flash recovery <insert name of recovery .img file here>
Replace the stuff between the <> with the name of the file you just downloaded
5. Wait for your device to reboot. Then type into cmd which is cd'ed to the "generic" folder:
adb reboot recovery
6. Make sure your recovery works as soon as it is done loading and then press "reboot system"
7. Follow its instructions
Click to expand...
Click to collapse
6. Root your system
1. Connect your phone as a "Disk Drive" and drag the "root.zip" file in the "root" folder to your phone's memory
2. Reboot into recovery with the adb command (adb reboot recovery)
3. Go to install zip from sdcard and navigate to the zip file you downloaded. Say "yes" and watch it flash
4. Reboot system now
5. Go to the play store and download any app that has "Busybox installer" in its name (the one by JRummy16 works good I believe)
Click to expand...
Click to collapse
If all goes well, you should be sitting at an AT&T HTC One X which is on the latest RUU leaked firmware (1.85.502.3 at this moment), rooted, busyboxed, and unlocked.
Congrats!
If you want to flash any ROMs, download the .zip file of the ROM, place it on your phones memory, and then install the zip like you did to the root.zip file.
Enjoy your AT&T HTC One X!

CREDITS:
kennethpenn: For initial root, getting all the RUUs from the "source" and for giving the HTC One X's situation prime press appearance on his website, BriefMobile.com
grankin01: For finding out how to edit the CID originally
designgears: For creating the One Click Super CID tool for bootloader unlock
paulobrien: For porting CWM Touch to our device
sk08: For leading the way in terms of MODs and organizing an S-OFF thread to get this thing fully ours
JSLEnterprises: For initially being there to help organize a bootloader unlock
Team Nocturnal: For their awesome ROM
Click to expand...
Click to collapse
If you want to thank or donate to someone, please do not do so to me. The people above are the ones that deserve the thanks and the donations to encourage them to keep doing the fantastic work they have been doing! I'm just a high school student
Some common terminology:
Deoxdexed: OEMs package their apps with .odex files because they are more optimized for your device. However, this makes the file uneditable by developers and things like mods cannot be used with odexed ROMs. A ROM with "deodexed" as a feature means it is easier to use mods with that ROM
Busybox: A collection of linux tools that are helpful for flashing ROMs and doing other basic Android tasks
RUU: ROM Update Utility, made by HTC, completely reflashes device firmware, useful if you get bricks. Only for Windows.
Root: Allows you to edit system level files
S-OFF: (currently unattainable) Security-OFF, it is a "feature" in HTC phones that allows us to modify almost any part of your system.
Unlocked Bootloader: Allows us to flash custom images to the device.
Click to expand...
Click to collapse

As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.

HydroSkillet said:
As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.
Click to expand...
Click to collapse
Wasnt sure, there are still a few people asking how to do it since it is a bit complicated with the 1.85 update breaking root so I just compiled everything into a master one.
And yeah, I use a lot of the scripts in the package I put for download.
Anyway, mods do what you think with this thread! And this might be in the wrong section, wasnt sure if it goes in general or development.

Please keep this up. As it is the most aggregated list of instructions, I'm sure it will help many who have just gotten their phone. Great work by the way.

HydroSkillet said:
As I understand and appreciate the work put in this thread, do we need another how to? Using the index sticky alone anyone should be able to root/unlock/flash their device. There's already scripts for everything and virtually no ADB required for nubs.
I would assume with the other info already in this section if someone can't figure out how to flash their phone, then they don't need to flash at all.
Click to expand...
Click to collapse
As I agree with you, a "one stop shop" that can be pointed out to for the noobs who got their mommy's to buy them their cool phone should at least keep the redundant questions to a minimum.

you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG

squishy5 said:
you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG
Click to expand...
Click to collapse
Locked boot loader yes.
Root for cwm no.
Sent from my HTC One X using xda premium

squishy5 said:
you cant ruu WITH a UNLOCKED bootloader these directions are wrong there would need to be a relock step added in.
ALSO THE CWM STEP NEED A ROOT FOR IT TO WORK LOOK AT THE PAGES
READ UP ON THE STUFF BEFORE YOU MAKE A GUIDE BECAUSE THIS IS WRONG
Click to expand...
Click to collapse
Why don't you read before you comment on things like this?
I never "Unlock the bootloader"
I simply get the Unlock token from HTC.
So stop acting like you know everything, because you dont
Don't ever use caps with me and expect me to come back with a nice response. I put this out for the community, not for some kid who thinks he knows it all to come back and say that I did it wrong when he didn't even read the post properly.
And you don't need root to install CWM, just an unlocked bootloader.
Stop calling my stuff wrong if you yourself don't even know what is right

rohan32 said:
Why don't you read before you comment on things like this?
I never "Unlock the bootloader"
I simply get the Unlock token from HTC.
So stop acting like you know everything, because you dont
Don't ever use caps with me and expect me to come back with a nice response. I put this out for the community, not for some kid who thinks he knows it all to come back and say that I did it wrong when he didn't even read the post properly.
And you don't need root to install CWM, just an unlocked bootloader.
Stop calling my stuff wrong if you yourself don't even know what is right
Click to expand...
Click to collapse
He put his foot in his mouth, apology should be coming oh and Good job man, Good job. Thanks for the work, this should be a sticky.

This is a great write up and would have been extremely helpful last night. I will admit I have done a lot of reading before I unlocked the bootloader and updated to 1.85, but it was still very confusing at some points. The htcdev site actually gave me the most trouble because I didn't realize most of the steps were completed and I could skip all the way to entering the token and the site was simply used for entering the token and getting the unlock file.
And yes, I almost said the same thing about the relock step. I had to read it twice to realize you didn't unlock yet. That's another thing that confused me last night was unlocking/relocking immediately.
I think this should be a sticky and all the other tutorials and such should be deleted. This is a perfect summary IMO and will use it when I unlock my friends one x
Sent from my HTC One X

My problem with this is that you packaged it all up while the individual threads for each thing are updating and you are severing up potentially outdated scripts.

designgears said:
My problem with this is that you packaged it all up while the individual threads for each thing are updating and you are severing up potentially outdated scripts.
Click to expand...
Click to collapse
I agree. While it is nice to have a all-in-one, you should be linking to the threads since they are updating them on a daily basis instead of linking to their scripts. Ive already had to change JeepFreaks script this morning as he updated it. It would make your world a lot easier if you did it that way, and also not risk giving some new user outdated scripts.
I think this should go in the General section as the first few pages should redirect to the original threads anyway.

Red5 said:
I agree. While it is nice to have a all-in-one, you should be linking to the threads since they are updating them on a daily basis instead of linking to their scripts. Ive already had to change JeepFreaks script this morning as he updated it. It would make your world a lot easier if you did it that way, and also not risk giving some new user outdated scripts.
I think this should go in the General section as the first few pages should redirect to the original threads anyway.
Click to expand...
Click to collapse
Sure thing, I will add to the original post for the links.
Also I will try to keep this updated, but yeah I might not catch all the updates

Thank you so much Rohan! Really appreciate it! Took me about 4 hours to get this done but it was worth it. Now to install cleanrom. Thanks again. This is my first time doing something like this.

Duse ijuat saw this and I'm going to do this and flash clean from when I get home and I read through this I honestly love you for doing this it helps more than you think thanks a lot
Deffinitlet should be stickied
Sent from my HTC One X using XDA

These are the best instructions! Wish i had them when all this shenanigans started. Thx

ethantarheels123 said:
Please keep this up. As it is the most aggregated list of instructions, I'm sure it will help many who have just gotten their phone. Great work by the way.
Click to expand...
Click to collapse
I agree. This guide is very helpful for me. I consider myself to be fairly computer literate and have flashed ROMs on previous phones, but I am a complete n00b to android and linux. Looking around some of the other threads -- it appears to me that there are many people who could have much confusion resolved by reading this. Thanks for the thread.
-- Jon

Not quite sure what's going on with my update...
I'm using the exe that updates the RUU and it gets stuck on the "sending to phone" step. Reboots the bootloader once, gets stuck again (as far as I can tell , nothing is ever sent) and then gives me an error telling me "The ROM Update Utility cannot update your Android Phone. Please get the correct ROM Update Utility and try again"
i've got the correct drivers installed (was having some trouble related to that a couple days ago but have since figured it all out ) would it be better to just do the update manually? (On my evo you just change the update file to Update.zip and it automatically installs it for you when you boot into bootloader)
maybe I'll have to look into it further, but just curious if anyone's run into this issue or figured out how to get past it as of yet...
Edit: Just an update- I'm betting its because I forgot to relock my bootloader before updating. So anyone who's already completed SOME of the steps in the second post here, make sure you relock your bootloader if you haven't already done so.
Edit1.5: This assumption was correct and the bootloader is now unlocked.
Edit 2- Almost done here... Busybox wont install. Tried two different apps, neither one worked. No indication as to why (got very vague error messages to the effect of "busybox was not installed")
Edit 3- FIXED- Ok, figured it out. As far as I can tell, the process should be Root first, THEN install busybox. It doesn't work without root privelages (at least that was my experience here)

[Q] Rooting, Flashing, Upgrade services needed!

I've searched & found 'How to....' threads on here but TBH I'm not a techy and most of it doesn't make sense to me.
I did try to upgrade from 4.0.4 to 4.1 this week and almost succeeded until some 'signature not recognised' message appeared. So I'm going to attempt another way (if possible/allowed) and ask if there's anybody out there who'd be willing to root (whatever that means), flash (ditto) and upgrade to 4.1 for me in return for payment.
I really hope this isn't against forum rules - it's a genuine, last-ditch attempt.
I live in the West Mids but travel a big chunk of the country each week so could possibly deliver the thing.
Here's hoping for an avalanche of replies.....

Can anyone tell me why I get the 'signature not verified' message please?
I've downloaded the upgrade from an October thread on this forum.

Which xoom do you have (wifi, 3g/4g, international, family)? Are you rooted yet?

dfib1 said:
Which xoom do you have (wifi, 3g/4g, international, family)? Are you rooted yet?
Click to expand...
Click to collapse
Thanks for replying!!
It's the wi-fi model. As for 'is it rooted?' - I would say not. One, because it's hardly been used and two, because I have no idea what 'rooted' means.

junctiontwo said:
Thanks for replying!!
It's the wi-fi model. As for 'is it rooted?' - I would say not. One, because it's hardly been used and two, because I have no idea what 'rooted' means.
Click to expand...
Click to collapse
Sorry I took so long to answer.
As for being rooted if you are the only one to have own the xoom and don't know what it means then you are most likely not rooted. Root is like getting administrator rights in windows. It gives you the ability to customize your device, install custom roms and also completely screw up your device .
You should be able to go to settings-about tablet--update (or system update) and it will check for your update and ask you to start the download and install. If this does not happen then you can flash back to Honeycomb (which I can walk you through this will also wipe all your data or maybe for a fresh start) and let your device automatically update to ICS (4.04) and the JB (4.1).
I can also walk you through rooting and installing a custom JB rom like you asked for free.

dfib1 said:
Sorry I took so long to answer.
As for being rooted if you are the only one to have own the xoom and don't know what it means then you are most likely not rooted. Root is like getting administrator rights in windows. It gives you the ability to customize your device, install custom roms and also completely screw up your device .
You should be able to go to settings-about tablet--update (or system update) and it will check for your update and ask you to start the download and install. If this does not happen then you can flash back to Honeycomb (which I can walk you through this will also wipe all your data or maybe for a fresh start) and let your device automatically update to ICS (4.04) and the JB (4.1).
I can also walk you through rooting and installing a custom JB rom like you asked for free.
Click to expand...
Click to collapse
Please don't apologise - you're the only one to answer!
I've tried the system update and have been told that there are none. (In my ignorance I actually thought it would update to 4.1.2 automatically!).
Your offer to walk me through the rooting & upgrade is extremely generous and I accept without hesitation.
If it's flashed back to HC, will it default back to ICS or move to JB?
A huge 'Thanks'.
James
PS. Having tried numerous times very recently to upgrade there's no data to erase so that's not an issue....

I am going to give you the steps to unlock your xoom, install a recovery, root, install CWM Rogue Touch recovery (better than the one you used to root) and then install stock JB.
Now that we are talking root I am going to ask a moderator to moved this thread to the root section.
Here is how I rooted my xoom.
follow the directions here but instead of doing step 1 follow this for adb install http://www.support-4-you.com/main/i...ged-adb-installation&catid=40:how-tos&Itemid= it is a 1 click adb install then follow from step 2 on.
When you are done there you can install CWM Rogue Touch screen recovery
Download CWM Rogue Touch zip and put on the root of your external sd card. ( if you don't have a sd card we will do it another way just let me know)
Boot into recovery by turning your xoom off.
1. press power
2. when the moto dual core logo comes on wait 3 seconds and press volume down
3. recovery should be displayed across the top press volume up.
You can skip steps 1- 3 now that you are rooted if you download Quick Boot open it, select recovery and the grant Super user permission
4. go to install zip from sd card (just like when you rooted) and find the CWM Rogue Touch Zip and install
5. reboot your xoom
6. you now have CWM Rogue Touch installed.
To install JB on your xoom you do need an sd card for this part
DownloadJB stock for wifi xoom and copy to your sd-card
Here is the thread discussing this [JB]Stock Android 4.1.1 JRO03H, Root, via CWM Recovery (US Wi-Fi MZ604) and also there steps for installing it but I will post them for you here.
boot into recovery
select backup and let it backup your current system (a Parachute)
then select wipe factory/data ( I Can't remember excactly what it says because I use a different one)
then select install zip from sd card
locate the JB rom you copy to your sd-card and install.
reboot system (it will take some time the first time)
sign in to android with your gmail account.
You are on JB
Good luck and don't worry if something goes wrong we can get you out of 99.99% of any issues that arise.

dfib1 = I cannot thank you enough.....
The frustrating thing is I'm about to leave the house and am working away until the weekend so can't try it until then! I'll let you know the outcome.
Have a great day :good:

If you need help with his excellent guide just post here or hit with a pm
Sent from my Xoom using xda app-developers app

Ok, a quick mid-procedure question....
(I'm doing something fundamentally wrong because I can't quite finish the upgrade).
Do I install the folders onto the Xoom from the SD in a zipped or un-zipped state? I've tried both but no luck so far in completing the task.
I've rooted successfully as my PC recognizes the device. I believe I've installed CWM ok - is there a way to confirm this?
On the final 4.1 install I get the 'installation aborted' message as 'signature not verified'. One thing I may be doing wrong is installing the wrong files? On selecting the JRO03H folder I'm then given file choices and I'm clicking on what I think are the most obvious. I can post a list of the choices if it helps?
Sorry to be such a newbie pain - I realize that these questions are irritating to those 'in the know'!

did you reboot after fastbooting the recovery? the recovery says clockwork at the top. It should also be touch screen controlled
When you move the zip over leave it as a zip on you xoom and when you flash the recovery will unzip it for you.

what step are you up to?

Sorry for the late update. I've tried the whole procedure several times from the very beginning, even removing previously installed Rogue & JB software, but STILL get the same error messages as previously described. I've re-booted at the right time according to the instructions but this still makes no difference, and have checked the 'USB de-bugging' option.
I did make a couple of basic errors in the Command function to begin with but realised these & corrected them. My device serial no. appeared so I assume I rooted successfully? I'm able to change Developer settings which I couldn't before. I even installed the USB drivers independently via the Motorola website.
I have a free day today so am going to make a bucket of coffee, make myself comfortable and start again.
One quick point - I'm in the UK and assume you two helpful guys are in the US? Looking at numerous sites it seems our respective Xoom models have different procedures which is maybe why this isn't working?
Thank you again for your seemingly endless patience.......

i believe you are getting these issues because you might still be running the stock recovery.
lets just backup and start fresh.
You followed the instructions mentioned before and I assume you have adb and fastboot installed.
Connect your xoom and make sure usb debugging is on.
open up a command line and type adb reboot bootloader
I'm going to assume because of the previous steps you unlocked the bootloader if not type in the command line fastboot oem unlock
You can download the recovery from here http://bit.ly/iLRAIV
If unlocked at the bootloader type fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img Note:make sure the img file is in the same folder where your fasboot.exe is in the sdk
after it has been flashed reboot device by hold volume up and power.
Move the JB stock rom into your sd card. you can download the rom from here http://www.mediafire.com/?qhbhlbvu859bv0f
after the device restarts type adb reboot recovery
in recovery Wipe everything except the sd card. Then flash the above jb rom. In theory everything should work. If you keep getting the error get back to us because Im going to give up and guide you through the install of the Team EOS Jellybean 4.1 rom that I know works without issues. PM if you want to have my direct contact info for gtalk so we can discuss further for any issues.

OK I've just tried another 8 times to root the thing, c-a-r-e-f-u-l-l-y following the instructions step-by-step.
1. I don't have the 'from SD card' option, instead have 'from USB drive'. I have a 16Gb flash drive connected via an adaptor for the Xoom which doesn't appear to prevent anything as it reads the contents of the card just fine, unless you can tell me otherwise?
2. In Recovery I get these options:
* reboot system now
* apply update from USB drive
* wipe data/factory reset
* wipe cache partition
3. Even when trying the very first install (Rogue), I get:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: signature verification failed
Installation aborted
I love a challenge and always get a buzz when I manage to do something that is foreign to me i.e computers. On this occasion however I'm fast getting to the stage where I think it'd be easier to leave things at 4.0.4.
My reason for wanting the upgrade in the first place is because I'm comparing this tablet to my work-supplied Galaxy Tab 2 running 4.1.1. Realistically I don't think the two will ever be comparable and I'm probably foolish to think this could be the case. It only remains to say that I am so very grateful to both of you for taking so much time & effort in talking me though the procedures.
I consider myself pretty 'switched on' but this has me foxed!
Cheers guys - have a great weekend. Hope the snow doesn't cause you problems!

here are the outline of the steps
1. unlock your xoom
2. fastboot a recovery to install custom recovery on your xoom
3. reboot into new recovery
4. flash universal root zip to root your phone
5. reboot phone that is now rooted.
6. reboot phone into custom recovery again
7. flash jb update
I think you have missed step 1 or 2.
When you type fastboot oem unlock what does it say?

Hmmm, I MAY be one step closer?
After typing' fastboot oem unlock' the tablet has gone into 'Starting Fastboot protocol support' but appears to be stuck. Do I wait until it's done it's thing?
OR would it be a whole lot easier for all concerned if we tried your other suggestion dfib and flashed back to HC and then to JB?

What if you type adb devices? Does a bunch of numbers show up or does it say waiting for device?

Hold the front page!!!!!!!
I just watched a video on how to unlock and it's worked. You were quite correct - I had missed your point 1 above and probably point 2. I'm moving onto the next bit now....

Great let us know what happens. I will be around for a while.

how to unlock and Root a Moto X Pure (Style)

First of all. There is no way you are going to be able to root your motorola device directly. You need a computer.
This works with all motorola phones that runs 6.0 marshmallow.
I am not responsible for any broken, bricked and or hurt people and or devices. Do this at your own risk
WARRANTY WILL BE VOIDED
BACKUP ANY FILES OR DATA YOU WANT TO KEEP
This method will delete EVERYTHING
DO NOT UNZIP ANY OF THE .ZIP FOLDERS, unless a third party put the twrp in a zip folder.
1. UNLOCKING YOUR MOTOROLA DEVICE(Already done? keep scrolling)
step 1: go to settings, select about phone, scroll down to where it says build number. Tap on build number several times until it says "you are now a developer". hit the back button on your screen and you should see a new option at the bottom of the settings page called 'Developer options". if this option is not there? repeat the process.
step 2: open up developer options, turn on "OEM unlocking" and "USB debugging"
step 3: download and install your motorola drivers --> https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
step 4: Download and install ADB and Fastboot. To install right click the install folder and run as administrator. type "y" then hit your "Enter" key through all permissions. to properly install your ADB. you'll be needing it for your command prompt to connect with your phone. You can download it here --> http://forum.xda-developers.com/showthread.php?t=2588979
Step 5: Connect your phone to your computer with a usb micro usb cable. Your phone should say "Allow USB debugging?" check the box that says "always allow for this computer" then hit ok.
Step 6: open up your command prompt. there is 2 ways to do this. The long way, click start on your computer and type in the windows search bar "command prompt" or the short way, hold shift + right click, then select open command prompt" and type in the command prompt "adb devices" it should say found, attached or show some sign it has been connected to your computer successfully.
Step 7: turn off your phone. After it shuts off completely, hold volume down and the power button until a screen pops up showing a little android guy. This is your fastboot page.(Controls for this listed below under BOOTLOADER CONTROLS) but you wont need to use it yet.
Step 8: type in the command prompt "fastboot oem get_unlock_data" and hit enter . you should see something that looks like this.
Example:
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
right click in your command prompt, select mark and highlight this. to copy the text right click at the top brim of the command prompt, move your mouse over edit and select copy.
Step 9: paste the results on a text folder, get rid all the bootloader writing and spaces by back spacing until all of the random letters and numbers are connected. it should look something like this. (dont copy mine, every phone has a different code)
Example:
0A40040192024205#4C4D355631323030373731363031303332323239#BD008A672BA4746C2CE02328A2AC0C39F951A3E5#1F532800020000000000000000000000
highlight and copy this number.
Step 10: go here--> https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b create an account, paste your device oem code in the box above "can my device be unlocked" and click "can my device be unlocked"
scroll down, click "I agree" to the agreement and select request unlock key.
Step 11: check the email u signed up to motorola with. copy the code, type in command prompt "fastboot oem unlock " and paste the code you got in your email. it should look like this.
Example:
fastboot oem unlock EVISRF7GFILOEEQRGABQ
and hit enter. It should say unlocked successfully and if you check your phone screen, you should see on the bottom of the screen it now says device is unlocked. Its usually written in yellow.
from here just tap the power button where it says start to boot up your phone. dont log into your google accounts just yet though.
BOOTLOADER CONTROLS: Power(Enter) Vol+(Up) Vol-(Down)
CONGRATULATIONS! YOU CAN NOW ROOT YOUR PHONE!
2. ROOTING YOUR MOTOROLA DEVICE (Must first be unlocked)
Step 1: Downloading your recovery. Click or copy the link below in your url. when your on the page click the primary (recommended) link and or the latest twrp.
https://twrp.me/devices/motorolamotox2015pure.html
Step 2: Downloading your operating system (supersu). Make sure your supersu is the latest and up to date. download only the official tested supersu operating system. If supersu ends in a odd number then it is a beta version (untested) and could not work for your phone. If it ends in an even number. Then it is an official full version of supersu and is tested to work.
Example:
SR4-SuperSU-v2.78-SR4-20161115184928.zip (OFFICIAL), (Finished), (Tested) Shiny "Sparkle Sparkle"
vs
SR4-SuperSU-v2.78-SR4-20161115184927.zip (BETA), (unfinished), (not tested) Rusted
download them from anywhere else if this one doesnt work anymore.
https://twrp.me/devices/motorolamotox2015pure.html
Step 3: While you are in your bootloader menu (the page with the little robot) (If your not in it turn off your device and hold volume down and the power button) type down "fastboot flash recovery (twrp name here).img copy down the name of your twrp.img file, paste it where i wrote "twrp name here" and type ".img" at the end of it. It should look like this.
Example:
fastboot flash recovery twrp-3.0.2-0-clark.img
Hit enter and see if it succeeds
Step 4: Dragging your supersu into your devices internal storage. you could start your phone by hitting the power button on where it says start. I was only able to see my device while the phone was in recovery mode. how to access that is while in bootloader mode, hit volume down twice or until it says "Recovery Mode" press power. Allow for modifications.
Step 5: If you dragged your supersu.zip file into your internal hard drive when the phone was in recovery mode. (I put mine in my downloads folder) to be safe i would reboot your device by hitting reboot, bootloader, and then go back to recovery mode. If the device had to be booted up for you to access your internal storage then turn off your phone and boot up recovery.
Step 6: While in recovery mode on your phone open the "Advanced" folder. Then open "Terminal" while in terminal follow these instructions carefully. Type out EXACTLY how i typed it here. Except the instructions i put in parenthesis. in other words dont type whats in (these).
echo SYSTEMLESS=true>>/data/.supersu (hit the green enter button on the bottom right of your keyboard)
cat /data/.supersu (hit enter and if done successfully you should see the phone automatically put in the next line)
SYSTEMLESS=true.
Example:
echo SYSTEMLESS=true>>/data/.supersu
cat /data/.supersu
SYSTEMLESS=true
Now exit.
Step 7: click install on the main recovery page, find it in 1 of the folders in the directory, when you find your supersu.zip folder, select it, slide the slider to install and when the install finishes hit the reboot button on the bottom right. your system will turn off temperarily and might go back to bootloader. if it does. hit start. if it restarts again? dont worry this is normal unless an error occurs.
You should see a new folder in your apps page called supersu. download "Root Checker" from the play store and check to see if your phone says its rooted or not.
Hope this helped you guys out. I hope i made this tutorial easy to follow and understand. dont skip any texts and if you have any questions. dont hesitate to ask down in the comments below. Thank you guys very much for viewing and HAPPY ROOTING!
GIVING THANKS!
I would like to give a huge thanks to acejavelin for the working download links and a method I would've never thought of using. He taught me the recovery advanced method that solved all of my problems. Without his recent post, this post wouldn't have even been possible.

Oh my god. This is a bit overwhelming. I'm coming from years of using Samsung phones and this seems a bit daunting. What's the reason for this phone needing all this extra work to root compared to Samsung phones?

Sailor Gerry said:
Oh my god. This is a bit overwhelming. I'm coming from years of using Samsung phones and this seems a bit daunting. What's the reason for this phone needing all this extra work to root compared to Samsung phones?
Click to expand...
Click to collapse
It's not "this phone" it's the standard way on Marshmallow... The reason is Marshmallow's security and Moto following the AOSP standards.
Not sure why you thing Samsung is easier, just different, some models are but many can't even be rooted at all.

I was on Marshmallow on my Note 5 and that was MUCH easier to root than this phone. No terminal BS. It was a walk in the park in comparison.

Sailor Gerry said:
I was on Marshmallow on my Note 5 and that was MUCH easier to root than this phone. No terminal BS. It was a walk in the park in comparison.
Click to expand...
Click to collapse
I'm not sure how you had so much trouble with this phone. Took me about 5 mins. Motorola allows for it to be unlocked, so I'm not sure how much easier it gets then that...

itslels said:
I'm not sure how you had so much trouble with this phone. Took me about 5 mins. Motorola allows for it to be unlocked, so I'm not sure how much easier it gets then that...
Click to expand...
Click to collapse
I got thru everything okay in the end and I'm now set; I'm only trying to say that in my experience with rooting Samsung phones, in comparison this took several more steps and there was a fairly large learning curb for me to make sure I didn't do anything wrong. Those Samsung phones I used were never locked so there was no need to mess with any bootloader on my end and generally the rooting steps were far more clearer compared to this phone where you first needed to unlock the bootloader (which required several steps on its own) then installing TWRP in a way I never did before so I needed to do some more reading on, then taking another step to make sure supersu properly flashed on this phone.
The experience was just very different from what I've been used to on Samsung phones that I used on Sprint and T-Mobile which never locked their Note devices. Y'all found it to be simple and easy to roll with, cool. I'm happy for you. Not all of us are as experienced with these methods and this is my first non-Samsung Android device so there are distinct differences in approaching rooting on them that required me to take more time to learn and understand fully.

While some Samsung phones do have one click methods, it does not hold true for all of them. In fact, the "same" phone model can differ from carrier to carrier for branded versions and therefore some differences occur. Moto does things differently, as does HTC and other manufacturers. The way for this phone is actually more true to the traditional way of rooting Android phones, especially the Nexus line.

aybarrap1 said:
While some Samsung phones do have one click methods, it does not hold true for all of them. In fact, the "same" phone model can differ from carrier to carrier for branded versions and therefore some differences occur. Moto does things differently, as does HTC and other manufacturers. The way for this phone is actually more true to the traditional way of rooting Android phones, especially the Nexus line.
Click to expand...
Click to collapse
Very familiar with the fact that the same phone can act different on other carriers which is why I avoided the likes of Verizon and AT&T like the plague and why I've only been on Sprint and T-Mobile because up that point I was using Samsung phones they were never locked and very easy to root and flash away. I was deliberate in sticking with those two carriers over the years for that fact.
If this is the traditional way of rooting Android phones then I'm glad I was able to figure it out in the end because I was certainly not used to doing it like that way before.
Like I said in other post, I wanted to roll with this platform for a while until the next Note device is released then it's back on the Samsung ship for me. But so far this phone is behaving brilliantly as a daily driver. I'll be keeping it after as a backup down the road.

Hi, great guide! Just a few questions:
First one: Do you know if this method works with the XT1570 variant (chinese one). I know it's a relatively unknown variant but for some stupid reason I ended up buying it anyway (I'm not american and don't live there either btw) and I want to root it to fix some battery problems that come with 5.1.1
Second question: In the second part of the guide (to root phone), in steps 1 and 2 I have to download the recovery file and the OS?? Where do I get those? I've read that since my variant is dual sim it might work with XT1572 dual sim images, but I'm still a bit lost.
Thanks in advance

Everything worked well until I got to making supersu systemless. I am using the same supersu file 2.78 SR4 and I dragged it into my download folder on the phone. When I type your exact command in TWRP terminal it returns the value "supersu not found". Any help with what I'm doing incorrectly would be appreciated. Thank you.

Zynax said:
Hi, great guide! Just a few questions:
First one: Do you know if this method works with the XT1570 variant (chinese one). I know it's a relatively unknown variant but for some stupid reason I ended up buying it anyway (I'm not american and don't live there either btw) and I want to root it to fix some battery problems that come with 5.1.1
Second question: In the second part of the guide (to root phone), in steps 1 and 2 I have to download the recovery file and the OS?? Where do I get those? I've read that since my variant is dual sim it might work with XT1572 dual sim images, but I'm still a bit lost.
Thanks in advance
Click to expand...
Click to collapse
If you are on Lollipop (5.1), you don't have to do anything special... Just boot TWRP and flash SuperSU, systemless is only needed for Marshmallow.

acejavelin said:
If you are on Lollipop (5.1), you don't have to do anything special... Just boot TWRP and flash SuperSU, systemless is only needed for Marshmallow.
Click to expand...
Click to collapse
That's good to hear, but I've only rooted in the past with one-click programs, and I haven't used TWRP before... Is there a guide for this method? (which is apparently pretty simple)
Thanks

Zynax said:
That's good to hear, but I've only rooted in the past with one-click programs, and I haven't used TWRP before... Is there a guide for this method? (which is apparently pretty simple)
Thanks
Click to expand...
Click to collapse
One click root methods are bad for Moto's, don't attempt it.
Unlock bootloader, boot and download SuperSU, flash TWRP image with fastboot, start TWRP and flash SuperSU. Done.
I could give you more details but on phone, follow link in my sig and just skip the "systemless" portion.

I just bought this phone from Best Buy. It took like 2 system updates right away. Its still on 6.0. Can someone please verify that this method is still working?
Thanks

Still works with 6.0. Now it wants to OTA update to 7.0 and from what I've read so far is not to go to 7.0. Possibly in the near future there will be a root method.

[H915] Root Guide + Restore Any Bricked LG V20

Just in Time for The New Year I would like to show Everyone How to root there Canadian variant LG V20!
Current Known issues
- No Service From Carrier
- Seems VERY Laggy (Can be Fixed with using a Kernel)
Other Information
- Yes you can Restore to factory Settings with this Method (So Don't worry if you screw up)
- Sorry far I Only know This works on the H915 however the Restore should work with all LG Models
- This will give you a Bootloader to have access to fastboot Commands
- Working TWRP Recovery
So After Reading the No Service Part many are mostly not going to be interested... I uploaded this Thread anyway to see if anyone could find a fix to this issue. (When one is found I will update this with the fix)
So If you still want to Root your Canadian LG V20 Let's do it!
DOWNLOAD THE ZIP FILE HERE
https://mega.nz/#!ABZV0AZZ!8LBGgpjiGT1ij6scshWTQO4tGhUb9GMUcTHtKLLhfW0
- I DO NOT TAKE ANY RESPONSIBILITY FOR YOU BREAKING YOUR DEVICE
- I HAVE NOT CREATED ANY OF THESE FILES I ONLY PUT EVERYTHING INTO ZIP FOLDER FOR YOU TO DOWNLOAD AND MAKE THINGS CONVENIENT AND SIMPLE
- PLEASE THANK THE ACTUAL DEVELOPERS WHO CREATED THESE FILES (LISTED BELOW)
FILES USED/THANK THESE PEOPLE
@me2151 Dirty Santa Files (Boot2.img, Step 1.bat, Step 2.bat and RUNMEFIRST.bat) -
HTML:
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
@jcadduono recowvery and dirtycow exploit (used with Dirty Santa)
HTML:
https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
Stock Images for LG V20 H915 you can find those here
HTML:
http://lg-firmwares.com/lg-h915-firmwares/
(You will need to be flashed on H91510d for this to work however you could try 10e if you wanted)
@autoprime UPPERCUT for LGUP (This is what allows the LG V20 to be read and will allow you to downgrade to 10d if needed and will let you restore to stock using Download Mode at any time! This will only be used for you if you mess up with the root and need to flash back to stock or you need to upgrade or downgrade to the 10d firmware)
HTML:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
@Chainfire SuperSu v2.79 SR1
HTML:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
WHAT DO YOU NEED BEFORE YOU START
- A Copy of LGUP
- An LG V20 H915 Running the 10d Firmware (if you need help flashing this firmware read below before Step 1)
- The Zip File I Listed above to Download
- ADB and LG Drivers
- A Windows Computer
HOW TO UPGRADE/DOWNGRADE TO FIRMWARE VERSION 10d
Step 1 - Boot Your Device into Download Mode (Turn the phone off hold the Vol + Button and plug in your device to the Computer)
Step 2 - On your Computer find the Zip File (extract it) and Open Uppercut.exe (This should launch LGUP and Make sure your Phone is Connected to your Computer)
Step 3 - In LGUP Select the Upgrade button (even if you are downgrading it will still work) then find the Firmware .kdz file for 10d
Step 4 - Flash the KDZ back onto your device
ROOTING THE DEVICE!
Step 1 - Install a Terminal Emulator App to your Device
Step 2 - Verify your device is plugged in and that ADB sees the Device (adb devices)
Step 3 - On your Computer Open the RUNMEFIRST.bat (do not close this window)
Step 4 - After loading up RUNMEFIRST.bat run Step1.bat (if you see permission denied on the files Flatland and Flatland64 this is normal)
Step 5 - Once the shell prompt opens in the step 1.bat window type "run-as con" (without quotations then hit enter) then type "chmod 0777 /storage/emulated/0/*" (yet again not in quotations and then hit enter)
Step 6 - Once that has finished on your phone open the Terminal app you downloaded earlier and type in id (if untrusted_app is displayed continue if not redo the steps)
Step 7 - In the Terminal Emulator type applypatch /system/bin/atd /storage/emulated/0/dirtysanta then watch the RUNMEFIRST.bat to see when it tells u to open Step2.bat (when it tells u to open Step2.bat open it)
Step 8 - You should now Be into a Somewhat usable bootloader on your device... now we Stop using DirySanta and Start to do things manually by ourselves open up a Command Prompt and type "fastboot flash boot boot.img" this will flash the boot2.img used in the Dirty Santa Exploit
Step 9 - After that finishes type "fastboot flash recovery TWRP.img" This will put TWRP (For the H918 Variant) on your device
Step 10 - Boot into TWRP (Remove battery then put it back in hold the Vol - Button and the Power Button Once LG Powered by Android Logo Appears Release the Power Button then Hold it Again, A White screen should come up say yes to both screens then should boot into TWRP)
Step 11 - Now that you are this far I recommend you backup everything so that you can start from this point if you mess up any upcoming steps that way you do not have to reflash the stock image and start from step 1 again....
Step 12 - Select Wipe from the Main menu then go to Format Data then type yes and enter (This will remove the password lock currently enabled on the device)
Step 13 - On the Main Menu select Install browse to your SD Card where you put your SuperSU.zip File onto and flash that to the device
Step 14 - Once that is completed return to the main menu select the Wipe menu again go to Format Data then yes again
Step 15 - Go back to the Wipe Menu and go to Advanced and select Dalvik, Data and Cache then slide to wipe after this finishes reboot to the system
Step 16 - Once in the System complete the Android setup and enable USB Debugging again then type adb reboot recovery (if your device does not boot into Android this is when u go back into TWRP by doing the remove battery method and holding those buttons down as I stated before and you Restore your Backup you made in Step 11 and you try doing those Steps again)
Step 17 - Once Back into TWRP (you may make another backup here if you would like) select Install then Flash SuperSU to your device again... Go back to the Main Menu Select Wipe then Advanced and Select Dalvik and Cache then Slide to Wipe and reboot into the System
Step 18 - Once back into Android you should see SuperSU on your device and you may download a Root Checker app of the Play Store to Make sure your Device is Fully Rooted and Working!
Please inform any Issues in the Replies below and I will add them to the List for People to Know before they Attempt rooting... If anyone finds a Fix for the Modem file to get service working on the LG V20 H915 while rooted please reply and i will Add that to the guide BELOW!
I DID NOT MAKE ANY OF THESE FILES SO PLEASE THANK THE CREATORS (LISTED ABOVE) FOR THEIR HARD WORK AND EFFORTS!
I THINK I BRICKED MY DEVICE/ THE ROOT DID NOT WORK/ I WANT TO GO BACK TO STOCK
Step 1 - As Stated Above to this all we need to do is Enter Download Mode (Remove Battery reinsert battery hold Vol + and plug in the Device) and then run the UPPERCUT.exe File
Step 2 - Select Upgrade browse over to your kdz file and select it then flash it to your device! Your Device Should boot up into Android (I Have Bricked my LG V20 Many Times Removing TWRP and the Bootloader and having nothing but the LG Logo and the Download Mode and I could Still get into the Device after doing this so it should work for you! However any problems should be dealt with the developer on his forum listed here
HTML:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
)
Anyone willing to Try installing things like Kernels and ROMs I would assume you would be using H918 Supported Files For those as thats what TWRP is running in.....

Will be adding a Zip File will all the Files need in a Couple of Minutes....

There seems to be a hidden settings menu on our Devices in which we can play around with the Modem Settings among other things.... you need to open the Phone App and Type in *#546368#*915# and the menu should come up.... Maybe somebody can figure out how to get Service running.... All Credit for this goes to @KedarWolf in his post listed here https://forum.xda-developers.com/v20/how-to/access-hidden-menu-h915-t3515098

Nice little write up. Did you try this on the wind/freedom 915 or videotron 915? My guess would be that you tried it on the wind 915 and if so i bet it has something to do with their slightly differnet bands they use albeit for a change an unlocked wind device works fine on other networks. But i really have no clue if there's a connection on why there's no signal. This kind of thing is beyond my pay grade. I would be guessing someone like @autoprime would be someone to ask but chances are he has other things to worry about and likely doesn't have the device.
But keep plugging away. You may figure it out yet

markbencze said:
Nice little write up. Did you try this on the wind/freedom 915 or videotron 915? My guess would be that you tried it on the wind 915 and if so i bet it has something to do with their slightly differnet bands they use albeit for a change an unlocked wind device works fine on other networks. But i really have no clue if there's a connection on why there's no signal. This kind of thing is beyond my pay grade. I would be guessing someone like @autoprime would be someone to ask but chances are he has other things to worry about and likely doesn't have the device.
But keep plugging away. You may figure it out yet
Click to expand...
Click to collapse
Yes the Wind H915 still haven't got it figured out yet hopefully someone will soon then we will have an official working root for the Canadian Variant

I would have jumped on the Freedom Mobile (formerly Wind) deal ($30 for 6GB for the first 10 months) if the H915 had been root and has an unlocked bootloader. LG's track record of offering unlocked bootloader is looking very bleak for the H915.

@TheDantee I am sure the service issue will be resolved soon but "Seems VERY Laggy" part is worrying me more. What is the reason for that? I like the possibility to go to the default LG rom like nothing happen.

Emilius said:
@TheDantee I am sure the service issue will be resolved soon but "Seems VERY Laggy" part is worrying me more. What is the reason for that? I like the possibility to go to the default LG rom like nothing happen.
Click to expand...
Click to collapse
Sorry i should mention that a Kernel fixed this issue for me!

TheDantee said:
Sorry i should mention that a Kernel fixed this issue for me!
Click to expand...
Click to collapse
Service issue or laggy part?

Emilius said:
Service issue or laggy part?
Click to expand...
Click to collapse
Laggy Part

Noob question, is the phone fully functional after step 10 (TWRP).
The reason I ask is because I really only need to get to TWRP as I want to enable google assistant.
At this point, the root is not a big concern for me.
Thanks,

SHABBA JOTS said:
Noob question, is the phone fully functional after step 10 (TWRP).
The reason I ask is because I really only need to get to TWRP as I want to enable google assistant.
At this point, the root is not a big concern for me.
Thanks,
Click to expand...
Click to collapse
Shoulbe be but you will need to still do a format on the device or you will get locked out and it will ask for a passcode....

TheDantee said:
Shoulbe be but you will need to still do a format on the device or you will get locked out and it will ask for a passcode....
Click to expand...
Click to collapse
So SuperSU messed the service reception? Not bootloader?

Emilius said:
So SuperSU messed the service reception? Not bootloader?
Click to expand...
Click to collapse
I don't think its SuperSU Causing the problem... In the bootloader (debug) that is provided in the DirtySanta root it states the device as an unlocked US996 LG V20 I feel that this is because it has no idea which provider its with since we are Canadian.. I have tried flashing many many modem files from many different firmwares I either get modem blue screens on boot (Goes away permanently if you remove sim card) or I get no Service in the System it self... so personally I think it is the Bootloader since its a debug bootloader because the Canadian Variant does not seem to have a bootloader.... May I ask what is your reasoning for SuperSU being the issue?

TheDantee said:
I don't think its SuperSU Causing the problem... In the bootloader (debug) that is provided in the DirtySanta root it states the device as an unlocked US996 LG V20 I feel that this is because it has no idea which provider its with since we are Canadian.. I have tried flashing many many modem files from many different firmwares I either get modem blue screens on boot (Goes away permanently if you remove sim card) or I get no Service in the System it self... so personally I think it is the Bootloader since its a debug bootloader because the Canadian Variant does not seem to have a bootloader.... May I ask what is your reasoning for SuperSU being the issue?
Click to expand...
Click to collapse
Based on your answer to SHABBA JOTS I get feeling that maybe is SuperSU creating that problem if until step 10 (TWRP) is all good. So soon we do step 8 (flashing boot image) service is gone. Is that right?

Emilius said:
Based on your answer to SHABBA JOTS I get feeling that maybe is SuperSU creating that problem if until step 10 (TWRP) is all good. So soon we do step 8 (flashing boot image) service is gone. Is that right?
Click to expand...
Click to collapse
Currently I have no access to my V20 so i can not try and tell you but if you are willing to reset and try the steps again up to Step 8 then lemme know the answer... however the system is very very very unstable many crashes tons of lag massive downgrade in battery without that boot.img... what if u flash twrp once in the bootloader but not the boot.img try that.... then get back to me Curious now lol

TheDantee said:
Currently I have no access to my V20 so i can not try and tell you but if you are willing to reset and try the steps again up to Step 8 then lemme know the answer... however the system is very very very unstable many crashes tons of lag massive downgrade in battery without that boot.img... what if u flash twrp once in the bootloader but not the boot.img try that.... then get back to me Curious now lol
Click to expand...
Click to collapse
He he, I am an Nexus person. I am so afraid to mess up my V20. With Nexus it is so easy, in 2 steps you are done. I miss that part I mast say.

Ok so i gave this a quick read and from what i gather you flash the bootloader before you flash twrp and super su. So here's a question that may or may not have been tried. Is there any reason you can't follow this method to root and then flash stock recovery and then flash stock bootloader?
Since it seems bootloader is the issue with having no data or signal. You would at least have root but just not twrp. Does that make sense?

markbencze said:
Ok so i gave this a quick read and from what i gather you flash the bootloader before you flash twrp and super su. So here's a question that may or may not have been tried. Is there any reason you can't follow this method to root and then flash stock recovery and then flash stock bootloader?
Since it seems bootloader is the issue with having no data or signal. You would at least have root but just not twrp. Does that make sense?
Click to expand...
Click to collapse
It's look like H915 dues not have bootloader at all.

Emilius said:
It's look like H915 dues not have bootloader at all.
Click to expand...
Click to collapse
Well it has to have a bootloader. It's just locked right. Like if we pulled apart the stock kdz we should be able to find it and my theory is we could use flashfire to flash stock recovery and also flash thr bootloader since twrp can't to my knowledge flash bootloaders. We would be left with root but no recovery. I could be so far from being right but who knows. This could be the only way to have root and a working phone.

Update on How to Root from Scratch, (Backup TA, Unlock Bootloader, then Recovery)

First off, i'm sorry if the title is misleading and/or belong in the wrong part of this forum.
So, I'm late to the party, just got myself a Z5 E6653 and when I look for guides on how to obtain root they kind of out-of-date. So i'm here to make sure the path I choose to follow will be the correct one as I dont want to lose my TA partition. As far as I know, according to this guide to back up my TA partition I have to downgrade to Lollipop, but I found something interesting about backing up TA partition on Marshmallow using dirtycow method (sorry Nougat users).
So, the steps I'm proposed is, if my device is already on stock MM unrooted, locked bootloader.
1. Go here Sony cross-devices development and download file called backupTA_v2.zip this shouldnt makes us need to downgrade
2. Run the BackupTA.cmd file if you're on windows
3. There will be errors about dirtycow failed but the script automatically retry, me myself got screen-full of retries before the script actually backed up my TA partition and you'll be presented with .imgfile called TA_devicemodel_somenumbers_timestamp.img about 2MB in size (am i correct so far? this is why i want to make sure this will work)
4. Save your file in a very secure place.
That concludes the Backup TA part of rooting process am I on the right path so far?
To get unlocked bootloader according to this :
Given that you have downloaded flashtool and installed the drivers in the \drivers folder in flashtool installation
!!THIS WILL WIPE ALL DATA!!
1. Click the BLU button at top then open Sony developer website
2. Select device and follow instruction until you get a key
3. Paste the key to flashtool
4. THAT'S IT?
Now after this we can use fastboot command to flash kernel and the kernel includes recovery.
Are these steps correct so far?
I might as well add these here.
To get kernel and recovery up and running, I'll be taking androplus kernel for example, I'm assuming it works with stock ROM.
1. Get the kernel .zip here at Androplus homepage
2. And download latest TWRP recovery from androplus download page, at this time of writing it should be TWRP-3.0.2.2-e6653.img
3. Notice that it's in .zip format which we cannot use yet since we don't have custom recovery.
4. Open the zip file you just downloaded and you should see boot.img That's your brand new shining kernel, extract it outside put it in a folder along with your favorite fastboot.exe file
5. Go to fastboot, as far as I know you go to fastboot by turning off the device -> hold volume down then plug USB cable. (see note)
6. First, according to Androplus page, flash the kernel first using the command
Code:
fastboot flash boot boot.img
7. Then the recovery
Code:
fastboot flash recovery TWRP-3.0.2.2-E6653.img
8. Reboot by unplugging the USB cable
Note: some interesting thing I found while trying to enter fastboot or flashmode that it might not work if your USB port is powered How to tell if your port is powered? I'm not sure. You will have to change port and hope for the best ^_^

Yes. Explained many times. Not hard to do.. 4-5 minutes then WHOLA!

sceryavuz said:
Yes. Explained many times. Not hard to do.. 4-5 minutes then WHOLA!
Click to expand...
Click to collapse
Ahaha, sorry. Those guides are "old" in android way of changing things very fast, and I haven't seen a guide which includes backup TA partition on marshmallow so I wasn't sure it'd work correctly. Now that I know it worked, I can proceed to unlock my bootloader.
Any tips or Kernel/Rom I should use for first time flash?

webslasher said:
Ahaha, sorry. Those guides are "old" in android way of changing things very fast, and I haven't seen a guide which includes backup TA partition on marshmallow so I wasn't sure it'd work correctly. Now that I know it worked, I can proceed to unlock my bootloader.
Any tips or Kernel/Rom I should use for first time flash?
Click to expand...
Click to collapse
LineageOS, CarbonROM, eXistenZ, SunKernel..

Dear both,
I was just doing quite the same, so it was nice to read the short summary. Honestly, I'm doing these "Flash ROM stuff" very rarely, so I'm not 100% confident how to bring back those DRM/TA. I recorded it - the device came with Android LP 5.11, so this was easy done by iovyroot.
Anyway, I have the TA-backup - so I'm also going to unlock the Boot Loader now. :good:
Good to know I spend a day on reading so many related stuff, and it could be done in 4-5 min

sceryavuz said:
LineageOS, CarbonROM, eXistenZ, SunKernel..
Click to expand...
Click to collapse
I will try Existenz as I want to keep it stock looking, thanks!
bosquarid said:
Dear both,
I was just doing quite the same, so it was nice to read the short summary. Honestly, I'm doing these "Flash ROM stuff" very rarely, so I'm not 100% confident how to bring back those DRM/TA. I recorded it - the device came with Android LP 5.11, so this was easy done by iovyroot.
Anyway, I have the TA-backup - so I'm also going to unlock the Boot Loader now. :good:
Good to know I spend a day on reading so many related stuff, and it could be done in 4-5 min
Click to expand...
Click to collapse
I'm glad to find someone that is going to go through these procedures too! I will also proceed to unlock my bootloader what rom and kernel do you plan to flash?

Hi, thanks for this. I just got the Z5 today so my first port of call was coming here and finding out how to root it. I previously had the Z2 and Z2 tablet which I rooted last year with the help of the members here, I hope the process for this isn't too different for this one. I think I forget more than I remember so the guide is helpful.