Database Info

Bricked lumia 710 recovery solution

I bricked my lumia 710 while flashing it and wanted to recover it fast since I didn't wanted it to send to the service center so I found this solution ..
IF YOU HAVE BRICKED YOUR PHONE WHILE FLASHING , AND IT ONLY VIBRATES NOTHING ELSE HAPPENS OR IT JUST KEEP SHOWING THE NOKIA LOGO FOLLOW THIS .
1. First download the stock rom from navifirm and then search for the biggest file boot.esco one and now extract it using winrar or 7zip .
2. You will find a file named boot.img .
3. Rename this file as boot.nb (name could be any just file extension should be .nb)
4. Now the tricky part , remove your battery from the device and put the backcover and connect the device to the computer .
(It may start to vibrate let it vibrate )
5. As soon as the vibration is finished press the volume up key , and enter the nand mode.
6. Now open the nss program go to Flashing >wp7tools> os file and select the one you just renamed .
7. Click on write os and leave it once done it will prompt you to remove the battery and insert again .
8. Insert your battery after disconnecting your phone from the computer .
9. Press power button and your mobile will be working properly again .
It worked for me and it may work for you also .
You can write os everytime like this it isn't affected and also battery is not drained in this case ...

i have formated the nand disk when it appeared to format how to recover it back plz help:crying:

how to get clockworkmod recovery console active ?

Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?

Download CWM recovery image from here
https://www.dropbox.com/s/jw87ma6yvqmodgx/u8860-recovery-6.0.1.0-touch.7z
visler said:
Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?
Click to expand...
Click to collapse

Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone

visler said:
Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone
Click to expand...
Click to collapse
Although i m not an expert.. but here the process
1) download the file ..
2) unzip it on ur pic
3) in the unzip folder u will see a recovery.img file
4) Now disocnnect the USB cable from phone (if any)
5) Shutdown the phone
6) Now press VOLUME + and Volume - and Power button together .. this will take u a PINK SCREEN
7) Now connect the phone to pc via USB cable .. in ur PC u will be able to see a new disk drive .. which will contain recovery.img file already
8) for backup up purpose rename the recovery.img in the newly mounted disk driver to recovery.org (or something else)
Now the final thing
9) Copy the recovery.img from your unzipped folder to mounted drive ..
Take out battery and u r done
Now U can enter in CWM recovery by press volume+ and power (i not sure.. chk forum)

Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes

visler said:
Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes
Click to expand...
Click to collapse
I m not sure why .. but trying removing SD Card and try .. let me know if it worked :good::good::good:

Help me >>> my phone honor 6 h60 l04 is did

When I turn it does not give me anything ... just a slogan Huawei is not related to the computer what to do ... helped me please,

40 viewers
40 VIEWERS AND NO ANSWERS:crying::crying::crying::crying:

What did you do to obtain that ?
* rom update ?
* modify any system file ?
* root with an "exotic" tool ?
PS:
your bootloader is unlocked ?
before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ?
have you tried to flash the rom ?

THANX
at the first
1- What did you do to obtain that?>>>>>>. rom update
2- your bootloader is unlocked ?>>>>>>>>>> yes
3- before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ? >>>>>>>>> i cant remember i thank b370
4- have you tried to flash the rom ? >>>>>>> yes i tired
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can

TRANSMITAR said:
at the first
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can
Click to expand...
Click to collapse
A bit difficult to figure out what happend. Did you have the abd driver on computer? did you hold the buttons to goto the bootloader? One thing is sure your phone is atill alive.
-

ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only

TRANSMITAR said:
ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only
Click to expand...
Click to collapse
Try to hold Vol+ and start see if you can get into the bootloader.
.

1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)

cheptii said:
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
Click to expand...
Click to collapse
after step no : 3 adb give me it photo >>>> my mobile is cant connect to my pc

you need to go to the fastboot in the phone

HOW ?

help me pleas

ithank it soft brack

Turn off the phone then Plug it and hold on Volume -

cheptii said:
Turn off the phone then Plug it and hold on Volume -
Click to expand...
Click to collapse
thank you

TRANSMITAR said:
thank you
Click to expand...
Click to collapse
, Keep me in touch

[Completed] DMTECH 1032DC Bricked

Hi!
This method is not working for me;
first of all download original dmtech 1032dc firmware form here
then extract OriginalFirmware_tablet1032dc.zip
In the folder TF_Update you will see these files: - update.zip - uImage_recovery - uImage - Developing boot.bin - factory_update_param.aml
• Copy those files to the root of your microSD card.
• Insert the microSD card into the tablet.
• Press and hold the volume - and power for about 15 seconds.
• The installation will start automatically, an Android icon and a line moves are displayed.
• wait until the process is finished and voila your tablet is working now!
What happened was, that i did the ABOVE, the installation started, but got never finished, it continued until the battery ran out.
Now it stops with the logo
I cannot go into recoverymode anymore, is there a special combination with reset, Powerbutton, Volume- and Volume+?
Or any special software to flash it?
Kindly Marc

marcooleo said:
Hi!
This method is not working for me;
first of all download original dmtech 1032dc firmware form here
then extract OriginalFirmware_tablet1032dc.zip
In the folder TF_Update you will see these files: - update.zip - uImage_recovery - uImage - Developing boot.bin - factory_update_param.aml
• Copy those files to the root of your microSD card.
• Insert the microSD card into the tablet.
• Press and hold the volume - and power for about 15 seconds.
• The installation will start automatically, an Android icon and a line moves are displayed.
• wait until the process is finished and voila your tablet is working now!
What happened was, that i did the ABOVE, the installation started, but got never finished, it continued until the battery ran out.
Now it stops with the logo
I cannot go into recoverymode anymore, is there a special combination with reset, Powerbutton, Volume- and Volume+?
Or any special software to flash it?
Kindly Marc
Click to expand...
Click to collapse
Hello,
Where did you find the instructions? Please post your query in the same thread.
-Vatsal

help me out

hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance

magikavi said:
hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance
Click to expand...
Click to collapse
First thing first, everything you do will be doing on your own risk, these steps are working perfectly but still if anything happened, i will be not responsible for it:
Follow the steps carefully:
First down load the required files
1. Firmware and flashing tool to downgrade from here
https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441
2. July to January [2018 naugat] OTA from here
Download the February oreo OTA also( in case if you failed to flash your device)
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
3. This whole process will also required a sd card or memory card
4. The instructions to flash the device is available on the firmware thread that i provided you.
Now
Install the tool that you downloaded from the link
Put all the OTA zips ok the sd card and reboot your device to recovery
To put it into recovery, power off your device properly
Plug your charger, and wait to see the battery charging animation
Once you see the battery icon, press and hold the power key and volume plus button together
Once you see the android logo, release the power button but keep holding volume plus button teel you see a screen with "no command" written
When you see the screen no command screen
Just hit these three button together simultaneously
Power button+volume plus+home key(fingerprint sensor)
For 2-3 times
You will see the recovery menu
Now select the option, update from sd card
Select the December OTA from sd card
Now it will give you error but it will change some files and nougat recovery menu
Reboot your device, it will take you to direct recovery menu
Now
The instructions will be for OST tool and for mena firmware
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file and put ur phone into bootloader, click next button, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the file again
6. Remember no matter if replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
9. Now connect it and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
After this your device could ask you to reset your device. Just do it.
Now one thing to remember
The